Can we use V6 supercharger script with new phiredrop rom ?
If yes, what version of supercharger is the best for this rom and what settings ?
Last question:
Is supercharger with phiremod 7.2 realy gives some performance ?
jazz in said:
Can we use V6 supercharger script with new phiredrop rom ?
If yes, what version of supercharger is the best for this rom and what settings ?
Last question:
Is supercharger with phiremod 7.2 realy gives some performance ?
Click to expand...
Click to collapse
I tried this the other day and kept getting lockups from v6 ver8. With setting 9.
Doesn't seem to really need supercharger though when I had everything installed
Sent from my NookColor using Tapatalk
First of all i want to apologize for my english.
I'm looking for the best ROM for us defy for gamming. I have a red lens. I don't like to make a full sbf with rds or etc. I need performance and stability.
Somebody can recommended any ROM's ?
try cm 7 nightly...
What ROM would be better pika/rabbit/ or other cm7 nightly
Krisku said:
What ROM would be better pika/rabbit/ or other cm7 nightly
Click to expand...
Click to collapse
they both pikachu (miui) and whiterabbit (cm7.2) use the v6 supercharger ram script, which add performance, just make sure to choose agressive v6 supercharger settings on the aroma installer...
you can even install the v6 script manually in any other rom, here's the post:
http://forum.xda-developers.com/showthread.php?t=991276
PSN>> MEMORY-MOD-v2 SwapAll-v3.0 KERNEL MODDER
I decided to make this script so that i don't have to keep on modding kernels as new ones are released (AOSP/AOKP specially)
USE THIS AT YOUR OWN RISK BECAUSE I CANNOT TEST IT BECOZ NO ACE ANYMORE
INFO:
MEMORY-MOD
SD-EXT partition (/dev/block/mmcblk0p2) on phone's memory card is mounted as /data instead of original internal data partition(stl13)
SWAPALL v3.0
Original Internal Storage (/dev/stl13 on stock GB & /dev/block/stl13 on AOSP) is formatted to be used as swap partition entirely so as to fully take advantage of fast internal data partition and relieving read/write load on memory card.
The third swap partition on memory card created using CWM or MiniTool or Gparted (/dev/block/mmcblk0p3) IF FOUND is used as swap space, with lower priority . So it will be used for swapping only when above mentioned swap partiton on internal data storage is full.
Swappiness set at 30.
Q.) WHATS NEW WITH MEMORY-MOD v2 IN THIS "KERNEL PATCHER" ???
A.) It simply patches an existing flashed kernel on phone
It extracts an existing flashed kernel from the phone
Then it extracts ramdisk from the kernel
Then it patches the required files on ramdisk
Then it builds back ramdisk and compiles back boot.img
Then it flashes the modded boot.img on phone to the phone
NOTE:
1: OFFICIAL CM7.2 roms with unmodified kernels do not have SWAP support :crying: so i recomend using a custom CM7 GB kernel then apply this mod else you will get increased memory but no swapall feature, resulting in slow system.
2: DO NOT use USB MASS STORAGE with linux computers because they mount your /sd-ext which is already being used as /data and corrupts it.
PREREQUISITES:
1: Custom kernel to be flashed before installing this script (STOCK based/AOSP/AOKP with ext4 support and init.d support but not Mem-Modded)
2: SD-EXT partition on sdcard formatted to ext4 (u can use this tool PSN_EXT4_Recovery_based_SD-EXT_ONLY_Format_Tool-signed.zip)
3: SWAP support implemented in kernel
4: Atleast 2.1 MB of free space available in /system
5: An SDCARD of CLASS 6 or more (class 4 users please dont report of ACE crawling slow!)
NOTE:
1: for fresh install only; user data on original /data will not be moved on /sd-ext; after flashing this script you will have to setup ur ace again.
1: after flashing this you wont be able to directly do a nandroid backup in cwm; so wipe(format) "/data" in recovery before attempting nandroid backup.
2: your phone will boot always as first boot with this script if no memory-card inserted or memory-card inserted without a sd-ext partition
3: Memory-Mod v2 will delete the init.d scrips of adrenaline engine which when unmodified is not compatible with Memory-Mods
4: if your rom has Adrenaline Engine 4.3 or 4.4 which has not been modified by for compatibility with Memory-Mod then you can reflash a compatible Adrenaline Engine 4.4 by flashing this(STOCK version / CM version) AFTER flashing the MEMORY-MOD script.
5: to reflash newer fixed versions of this mod you have to reflash ur non-patched kernel or rom and then flash this kernel patcher in recovery.
Some info:
PSN_STOCK-GB_MEM-MOD-v2_SWAPALLv3.0 : will work on kernels like batteryextender and nims
PSN_CM7.2-GB-official_MEM-MOD-v2_SWAPALLv3.0 : will work on kernels on official cm7.2 roms
PSN_CM10.1-JB_MEM-MOD-v2_SWAPALLv3.0 : will work on JB 4.2.2 based roms like PAC.. should work on others too
PSN_CM9-ICS_MEM-MOD-v2_SWAPALLv3.0-signed.zip : is for CM9 based unofficial roms
PSN_CM9-ICS-MACLAW-FINAL3+_MEM-MOD-v2_SWAPALLv3.0-signed.zip : is for ICS CM9 Maclaw final 3 and above roms
UNINSTALL METHOD: (to get back to old-school 150MB internal data on ace)
1: flash your original non-modded kernel or custom rom
2: flash PSN_factory_reset_EXT4_Recovery_based_Format_Tool-signed.zip
3: you need to setup your phone all over again for old-school 150MB internal data on ace.
CHANGELOGS
Memory-Mod v2 (KERNEL PATCHER)
boot.img extracted from bml8 partition on phone
it is split into kernel zImage and ramdisk
it extracts ramdisk and patches required files
it packs the modded ramdisk and builds back boot.img ready to be flashed back to phone
it flashes the boot.img to phone !!
I had to move away from init.d scripts because /data once mounted by kernel cannot be unmounted to be switched to /sd-ext
Memory-Mod v1.1 <DEPRECIATED> (init.d script)
/dev/block/mmcblk0p2 is mounted on /sd-ext first then bind-mounted to /data
(because already /dev/stl13 is mounted on /data by kernel on boot, this workaround has to be applied)
all init.d scripts of Adrenaline-Engine are deleted so that a non-compatible version if present on rom does not bother rom booting with this scipt
Memory-Mod v1 <DEPRECIATED> (init.d script)
(initial release)
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Nice work
Sent from my GT-P3100 using Tapatalk HD
i need feedback !!!
AW: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Can i use it on maclaw's aosp jb 4.2.2?
Sent from my GT-S5830 using xda app-developers app
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
mattshady said:
Can i use it on maclaw's aosp jb 4.2.2?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
you should try out JB version and let me know
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
psndna88 said:
i need feedback !!!
Click to expand...
Click to collapse
Can this be flashed on a rom with apps already installed? Or does it have to be with a fresh install?
You just have to flash it and that's it?
SuperAce609 said:
Can this be flashed on a rom with apps already installed? Or does it have to be with a fresh install?
You just have to flash it and that's it?
Click to expand...
Click to collapse
sorry fresh install only after backing up apps
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
psndna88 said:
sorry fresh install only after backing up apps
Click to expand...
Click to collapse
Best way to backup is Titanium backup free/ pro.
Never lose any data with tb.
Sent from my GT-P3100 using Tapatalk HD
PAC-Rom 20.1.0?
trying here in PAC-Rom 20.1.0 of OldDroid, but the lingering ta boot, I installed the script after a clean install of the rom but did not expect the first boot, it will be that's why taking ta boot?
Sorry my bad english.
:good:
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Paulo Narley said:
trying here in PAC-Rom 20.1.0 of OldDroid, but the lingering ta boot, I installed the script after a clean install of the rom but did not expect the first boot, it will be that's why taking ta boot?
Sorry my bad english.
:good:
Click to expand...
Click to collapse
i cant clearly understand you.. tell me
IS IT BOOTING ON YOUR PAC ROM ?
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
sorry for my english, I'm brazilian, what I meant was that tava lingering in the boot rom PAC_ROM but already got, however was very slow in sdcard class 4.
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Paulo Narley said:
sorry for my english, I'm brazilian, what I meant was that tava lingering in the boot rom PAC_ROM20.0.2 but already got, however was very slow in sdcard class 4.
Click to expand...
Click to collapse
ok
oops i forgot to add that its for class 6 and above sdcards .. class4 will b v slow
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
ok
oops i forgot to add that its for class 6 and above sdcards .. class4 will b v slow
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
Click to expand...
Click to collapse
Hmm understand, even if I use the adrenaline egine, that the script is not compatible?
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Paulo Narley said:
Hmm understand, even if I use the adrenaline egine, that the script is not compatible?
Click to expand...
Click to collapse
i believe it should be compatible with this one http://forum.xda-developers.com/attachment.php?attachmentid=1453590&d=1351957660
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
psndna88 said:
i believe it should be compatible with this one http://forum.xda-developers.com/attachment.php?attachmentid=1453590&d=1351957660
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
Click to expand...
Click to collapse
Thanks for the reply, but it's a shame because my sdcard be a class 4.
This is based on your kernel 3.x?
If you would like to launch a version for our S5830 without moving data to extsd?
I learned that the kernel 3.x brings major performance improvements and battery, and it can be seen using the kernel 3.8.2 on Ubuntu 12.10 with my notbook.
Again thank you!
Sorry for my bad English.
psndna88 said:
sorry fresh install only after backing up apps
Click to expand...
Click to collapse
Man, I'm literally dying to try this out. But I'm tired of starting roms over and over again D:
Can we change the swappiness and mess with the script settings?
EDIT: Tried it on Stock on Fire again and it didn't work. Phone was stuck on the Galaxy Ace black screen.
Did a fresh install, flashed SD-EXT 4 format script, then the swap all script. Didn't work for me.
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
SuperAce609 said:
Man, I'm literally dying to try this out. But I'm tired of starting roms over and over again D:
Can we change the swappiness and mess with the script settings?
EDIT: Tried it on Stock on Fire again and it didn't work. Phone was stuck on the Galaxy Ace black screen.
Did a fresh install, flashed SD-EXT 4 format script, then the swap all script. Didn't work for me.
Click to expand...
Click to collapse
gime link to stock on fire...
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Can i try it on ddqk8 stock rom?
Paulo Narley said:
Thanks for the reply, but it's a shame because my sdcard be a class 4.
This is based on your kernel 3.x?
If you would like to launch a version for our S5830 without moving data to extsd?
I learned that the kernel 3.x brings major performance improvements and battery, and it can be seen using the kernel 3.8.2 on Ubuntu 12.10 with my notbook.
Again thank you!
Sorry for my bad English.
Click to expand...
Click to collapse
this script is not based on any kernel but has some kernel feature dependencies which are available only on custom kernels
lots of difference between ubuntu kernel and android kernel and also Ace does not have kernel source built for stock 3.x kernels
why wont my cm10.1 rom boot i compiled it with ubuntu 10.04 and features linaro 4.7.3 krait and bionic tweaks
edit: is there a way i can logcat
extremetempz said:
why wont my cm10.1 rom boot i compiled it with ubuntu 10.04 and features linaro 4.7.3 krait and bionic tweaks
edit: is there a way i can logcat
Click to expand...
Click to collapse
Does the default CM10.1 work? I would check to make sure first the default CM10.1 works, then I would check it the addons are compatible. The question for me is why the Bionic tweaks. I am inclined to say it's not going to work. Also, you could flash some of these addons after installing CM 10.1. Finally, check to see if there is a compiling error.
Is it possible to install a kernel module into the stock kernel on this device using insmod /sdcard/xxxx.xx or is the kernel built using EFI_SECURE_BOOT_SIG_ENFORCE=y