PSN>> MEMORY-MOD-v2 SwapAll-v3.0 KERNEL MODDER
I decided to make this script so that i don't have to keep on modding kernels as new ones are released (AOSP/AOKP specially)
USE THIS AT YOUR OWN RISK BECAUSE I CANNOT TEST IT BECOZ NO ACE ANYMORE
INFO:
MEMORY-MOD
SD-EXT partition (/dev/block/mmcblk0p2) on phone's memory card is mounted as /data instead of original internal data partition(stl13)
SWAPALL v3.0
Original Internal Storage (/dev/stl13 on stock GB & /dev/block/stl13 on AOSP) is formatted to be used as swap partition entirely so as to fully take advantage of fast internal data partition and relieving read/write load on memory card.
The third swap partition on memory card created using CWM or MiniTool or Gparted (/dev/block/mmcblk0p3) IF FOUND is used as swap space, with lower priority . So it will be used for swapping only when above mentioned swap partiton on internal data storage is full.
Swappiness set at 30.
Q.) WHATS NEW WITH MEMORY-MOD v2 IN THIS "KERNEL PATCHER" ???
A.) It simply patches an existing flashed kernel on phone
It extracts an existing flashed kernel from the phone
Then it extracts ramdisk from the kernel
Then it patches the required files on ramdisk
Then it builds back ramdisk and compiles back boot.img
Then it flashes the modded boot.img on phone to the phone
NOTE:
1: OFFICIAL CM7.2 roms with unmodified kernels do not have SWAP support :crying: so i recomend using a custom CM7 GB kernel then apply this mod else you will get increased memory but no swapall feature, resulting in slow system.
2: DO NOT use USB MASS STORAGE with linux computers because they mount your /sd-ext which is already being used as /data and corrupts it.
PREREQUISITES:
1: Custom kernel to be flashed before installing this script (STOCK based/AOSP/AOKP with ext4 support and init.d support but not Mem-Modded)
2: SD-EXT partition on sdcard formatted to ext4 (u can use this tool PSN_EXT4_Recovery_based_SD-EXT_ONLY_Format_Tool-signed.zip)
3: SWAP support implemented in kernel
4: Atleast 2.1 MB of free space available in /system
5: An SDCARD of CLASS 6 or more (class 4 users please dont report of ACE crawling slow!)
NOTE:
1: for fresh install only; user data on original /data will not be moved on /sd-ext; after flashing this script you will have to setup ur ace again.
1: after flashing this you wont be able to directly do a nandroid backup in cwm; so wipe(format) "/data" in recovery before attempting nandroid backup.
2: your phone will boot always as first boot with this script if no memory-card inserted or memory-card inserted without a sd-ext partition
3: Memory-Mod v2 will delete the init.d scrips of adrenaline engine which when unmodified is not compatible with Memory-Mods
4: if your rom has Adrenaline Engine 4.3 or 4.4 which has not been modified by for compatibility with Memory-Mod then you can reflash a compatible Adrenaline Engine 4.4 by flashing this(STOCK version / CM version) AFTER flashing the MEMORY-MOD script.
5: to reflash newer fixed versions of this mod you have to reflash ur non-patched kernel or rom and then flash this kernel patcher in recovery.
Some info:
PSN_STOCK-GB_MEM-MOD-v2_SWAPALLv3.0 : will work on kernels like batteryextender and nims
PSN_CM7.2-GB-official_MEM-MOD-v2_SWAPALLv3.0 : will work on kernels on official cm7.2 roms
PSN_CM10.1-JB_MEM-MOD-v2_SWAPALLv3.0 : will work on JB 4.2.2 based roms like PAC.. should work on others too
PSN_CM9-ICS_MEM-MOD-v2_SWAPALLv3.0-signed.zip : is for CM9 based unofficial roms
PSN_CM9-ICS-MACLAW-FINAL3+_MEM-MOD-v2_SWAPALLv3.0-signed.zip : is for ICS CM9 Maclaw final 3 and above roms
UNINSTALL METHOD: (to get back to old-school 150MB internal data on ace)
1: flash your original non-modded kernel or custom rom
2: flash PSN_factory_reset_EXT4_Recovery_based_Format_Tool-signed.zip
3: you need to setup your phone all over again for old-school 150MB internal data on ace.
CHANGELOGS
Memory-Mod v2 (KERNEL PATCHER)
boot.img extracted from bml8 partition on phone
it is split into kernel zImage and ramdisk
it extracts ramdisk and patches required files
it packs the modded ramdisk and builds back boot.img ready to be flashed back to phone
it flashes the boot.img to phone !!
I had to move away from init.d scripts because /data once mounted by kernel cannot be unmounted to be switched to /sd-ext
Memory-Mod v1.1 <DEPRECIATED> (init.d script)
/dev/block/mmcblk0p2 is mounted on /sd-ext first then bind-mounted to /data
(because already /dev/stl13 is mounted on /data by kernel on boot, this workaround has to be applied)
all init.d scripts of Adrenaline-Engine are deleted so that a non-compatible version if present on rom does not bother rom booting with this scipt
Memory-Mod v1 <DEPRECIATED> (init.d script)
(initial release)
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Nice work
Sent from my GT-P3100 using Tapatalk HD
i need feedback !!!
AW: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Can i use it on maclaw's aosp jb 4.2.2?
Sent from my GT-S5830 using xda app-developers app
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
mattshady said:
Can i use it on maclaw's aosp jb 4.2.2?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
you should try out JB version and let me know
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
psndna88 said:
i need feedback !!!
Click to expand...
Click to collapse
Can this be flashed on a rom with apps already installed? Or does it have to be with a fresh install?
You just have to flash it and that's it?
SuperAce609 said:
Can this be flashed on a rom with apps already installed? Or does it have to be with a fresh install?
You just have to flash it and that's it?
Click to expand...
Click to collapse
sorry fresh install only after backing up apps
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
psndna88 said:
sorry fresh install only after backing up apps
Click to expand...
Click to collapse
Best way to backup is Titanium backup free/ pro.
Never lose any data with tb.
Sent from my GT-P3100 using Tapatalk HD
PAC-Rom 20.1.0?
trying here in PAC-Rom 20.1.0 of OldDroid, but the lingering ta boot, I installed the script after a clean install of the rom but did not expect the first boot, it will be that's why taking ta boot?
Sorry my bad english.
:good:
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Paulo Narley said:
trying here in PAC-Rom 20.1.0 of OldDroid, but the lingering ta boot, I installed the script after a clean install of the rom but did not expect the first boot, it will be that's why taking ta boot?
Sorry my bad english.
:good:
Click to expand...
Click to collapse
i cant clearly understand you.. tell me
IS IT BOOTING ON YOUR PAC ROM ?
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
sorry for my english, I'm brazilian, what I meant was that tava lingering in the boot rom PAC_ROM but already got, however was very slow in sdcard class 4.
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Paulo Narley said:
sorry for my english, I'm brazilian, what I meant was that tava lingering in the boot rom PAC_ROM20.0.2 but already got, however was very slow in sdcard class 4.
Click to expand...
Click to collapse
ok
oops i forgot to add that its for class 6 and above sdcards .. class4 will b v slow
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
ok
oops i forgot to add that its for class 6 and above sdcards .. class4 will b v slow
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
Click to expand...
Click to collapse
Hmm understand, even if I use the adrenaline egine, that the script is not compatible?
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Paulo Narley said:
Hmm understand, even if I use the adrenaline egine, that the script is not compatible?
Click to expand...
Click to collapse
i believe it should be compatible with this one http://forum.xda-developers.com/attachment.php?attachmentid=1453590&d=1351957660
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
psndna88 said:
i believe it should be compatible with this one http://forum.xda-developers.com/attachment.php?attachmentid=1453590&d=1351957660
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
Click to expand...
Click to collapse
Thanks for the reply, but it's a shame because my sdcard be a class 4.
This is based on your kernel 3.x?
If you would like to launch a version for our S5830 without moving data to extsd?
I learned that the kernel 3.x brings major performance improvements and battery, and it can be seen using the kernel 3.8.2 on Ubuntu 12.10 with my notbook.
Again thank you!
Sorry for my bad English.
psndna88 said:
sorry fresh install only after backing up apps
Click to expand...
Click to collapse
Man, I'm literally dying to try this out. But I'm tired of starting roms over and over again D:
Can we change the swappiness and mess with the script settings?
EDIT: Tried it on Stock on Fire again and it didn't work. Phone was stuck on the Galaxy Ace black screen.
Did a fresh install, flashed SD-EXT 4 format script, then the swap all script. Didn't work for me.
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
SuperAce609 said:
Man, I'm literally dying to try this out. But I'm tired of starting roms over and over again D:
Can we change the swappiness and mess with the script settings?
EDIT: Tried it on Stock on Fire again and it didn't work. Phone was stuck on the Galaxy Ace black screen.
Did a fresh install, flashed SD-EXT 4 format script, then the swap all script. Didn't work for me.
Click to expand...
Click to collapse
gime link to stock on fire...
Sent from I9300 Stock 4.1.2 based Ultimarom v10.1 + Siyah Kernel v1.8.9 with dualboot Official CM10.1 JB 4.2.2
Re: [SCRIPTS][init.d] PSN MEMORY-MOD + Swapall-v3.0
Can i try it on ddqk8 stock rom?
Paulo Narley said:
Thanks for the reply, but it's a shame because my sdcard be a class 4.
This is based on your kernel 3.x?
If you would like to launch a version for our S5830 without moving data to extsd?
I learned that the kernel 3.x brings major performance improvements and battery, and it can be seen using the kernel 3.8.2 on Ubuntu 12.10 with my notbook.
Again thank you!
Sorry for my bad English.
Click to expand...
Click to collapse
this script is not based on any kernel but has some kernel feature dependencies which are available only on custom kernels
lots of difference between ubuntu kernel and android kernel and also Ace does not have kernel source built for stock 3.x kernels
Related
:::::::...Devil Kernel & Recovery for || 4.2.x || 4.3.x || Jellybean Builds...::::::::
Plus:
TWRP Recovery
CWM Recovery
Phils Touch Recovery
CM Stock Kernel
...……………………………
...……………………………
Important...
DO NOT MIX
A 4.2.X Kernel to a 4.3.x ROM
OR 4.3.x KERNELS with 4.2.X ROMs
...……………………………
...……………………………
from the hard work of Recognized Developer - DerTeufel1980
and his ...HellyBean Thread..... HellyBean Change Log
I have only put this into a standalone flashable .zip package ... Enjoy
I take no responsibility if it messes anything up,,,, these work for me or I dont post them ,,, ,,,, make backups,,,, nandroids,,, whatever you favorite choice is...
be prepared to potentially wipe, if it wont boot and you can get back into recovery,,, but worst case scenario you will have to ODIN back to stock EH03 and start fresh ...
:: If anyone needs a kernel I have not done up yet shoot me a reply or PM ::
Information and Compatibility
>>>>> >>>> >>>
4.2,,, 4.2.1,,, 4.2.2
These Kernels/Recovery are interchangeable across these ROMs Only ,,, But NOT 4.3.x {{ They are tagged accordingly }}
So feel free to mix & match
Preferred method of installation:
from Recovery
wipe Dalvik and Cache partition
Install Zip
Reboot
Enjoy
Currently these Kernels work with all 4.2.1 & 4.2.2 versions ::
:: CM10.1 nightly::
:: BAKED blackbean-8::
:: AOKP PUB :: Thread Link
:: CM10.1 JELLYBRO (makelegs_Euroskank ) ::
:: ParanoidAndroid AOSPA 3+ ::
:::[AOKP 4.2.2] [MR1Build5] [UNOFFICIAL]::
:::[4.2.2] Avatar ROM for Samsung Fascinate :::
LiquidSmooth
Dirty Unicorns
Eclipse
plus the new ROMs from unjustified dev
Slim
RemICS-JB
SuperNexus
Pac-Man
Chameleon OS [ChaOS]
RootBox
CarbonRom
Beanstalk
Domination
Lets all Rom versions recovery boot into Devil Touch Recovery - including all other Devil Kernel tweaks with programs like the ones below
With some ROMs offering nightly builds sometimes these may not work with the newer nightly ROM builds, just depends on what gets changed.
Just head the warnings and be prepared for possible incompatibility.
I will work on having a current zip installable kernel available from the latest Hellybean Builds as DerTeufel1980 releases them
I have also put together some
"Return to original kernels"
aka: the included kernel from whichever ROM build you are on... and will attempt to label them accordingly
But,,, feel free to mix & match
Tweaks --- Over Clocking and Kernel Control Programs --
Please don't ask about " devil kernel manager"
but you could click here for more about Devil Kernel tweaks and apk's to download
>>>>> >>>> >>>
Please don't ask about " devil kernel manager" || it still doesn't like to work except for a few settings,,, like big mem, etc... ... ... ...
.......... I honestly just copy that section over into -- mctweaker init.d settings -- which carries all the other tweaks i need and use... And it works... see Below
As well as plenty other programs
"Devil Kernel Manager" does work ,,, Some setting, though, do not stick across a reboot
and
I prefer to Use
"mcTweaker ® root" program I can set pretty much all the stuff that "devil kernel config" would normally let you do,,, and scripts auto run on reboot
...only things I dont see with mctweaker are No :Ram Settings = Xl/Big Mem :: :: Live OC :: :: but it has a few other things you can tweak and set that I really like...
not to mention
"ROM Toolbox Lite " is excellent with the stuff available in it...
I also prefer to Use
Aokp Performance Settings - Standalone Version
http://d-h.st/eRG
PerformanceControl.apk
I also found this nice Lulzactive controls app
1: explains things better
2: offers quick access
3: from the developer
https://play.google.com/store/apps/details?id=com.tegrak.lulzactive
and these work great too:::
,,, I've personally tested all of them ,,,
available from the play store
Some don't offer full functionality and capability but do allow you to set most all settings offered
::: titanium tweaker :::: greenblob :::: nstools :::: Trickster Mod
My Personal Favorite Devil settings are
100 - Min
1300 - Max
Lulzactive - Governor
Zen - I/O Scheduler
and SD read ahead 1024
......................................................................................................................
Interested in more about :: schedulers and governors
here are some great links
>>>>>>>>>>>>>
[GUIDE] CPU Governors, TCP algorithms, Android Tips, & IO Schedulers:
[REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs
[REF][Super Friendly] Governors, I/O Schedulers, Optimization Tips [14-NOV]
Information about I/O Schedulers
ROW scheduling algorithm
I/O Scheduler - A quick test
>>>>>>>>>
......................................................................................................................
I take no responsibility if it messes anything up,,,, these work for me or I dont post them,,, ,,,, make backups,,,, nandroids,,, whatever you favorite choice is...
be prepared to potentially wipe, if it wont boot and you can get back into recovery,,, but worst case scenario you will have to ODIN back to stock EH03 and start fresh ...
HellyBean Change Log
::KERNEL LINKS::
Fascinate - 4.3 Kernels
My ~ AndroidFileHost.com
~~~ clickable Link ~~~ https://www.androidfilehost.com/?a=show&w=files&flid=7312
--- New links show up in these first, before the "Direct Links" get posted
Fascinate - 4.2 Kernels
...Devil 4.2 Build Kernels & ROM Original_Kernels
My ~ Dev-Host.com ~
~~~ clickable Link ~~~ http://d-h.st/users/hhp_211/?fld_id=10807#files ~~
...
ROM Original Kernel_ --_Mirror by LasVegasRomeo
...
Devil 4.2 build _ --_Mirror by LasVegasRomeo
......……………………………
……………………………………
:: KERNEL Direct Links ::
:: :: 4.3 Kernel :: ::
Do not mix 4.3 Kernels with 4.2 ROMs
Linky for anyone who wants to try the devil kernel 4.3 version with cwm recovery, from the carbon rom bdogg just did.
Feedback welcomed.
kernel-Devil_4.3_fassy_09-16.zip
http://www.androidfilehost.com/?fid=23134718111253392
Thanks DerTeufel1980, notta, bdogg718, unjustified dev, you, you & you too!
.
..............................................
…………………………………………………
:: KERNEL Direct Links ::
:::: DEVIL 4.2.2 KERNELS ::::
... Devil Kernel w/Devil touch Recovery
kernel-Devil_4.2.2_fassy_07-17
http://www.androidfilehost.com/?fid=23060877489995873
http://d-h.st/RoJ
kernel-Devil_4.2.2_fassy_07-10
http://www.androidfilehost.com/?fid=23043426517778671
http://d-h.st/rni
kernel-Devil_4.2.2_fassy_07-07
http://www.androidfilehost.com/?fid=23043426517778670
http://d-h.st/87j
Kernel_devil_fassy-06_20.zip
http://www.androidfilehost.com/?fid=23017610006233293
http://d-h.st/hNs
kernel-Devil_4.2.2_fassy_04-26.zip
http://d-h.st/dZd
Older Kernel versions
Devil_4.2.2_fassy_04-07.zip
http://d-h.st/rXV
kernel-Devil_4.2.2_fassy_04-05.zip
http://d-h.st/5Th
kernel-Devil_4.2.2_fassy_04-03.zip
http://d-h.st/312
kernel-Devil_4.2.2_fassy_03-11.zip
http://d-h.st/4wq
Kernel-Devil_4.2.2_fassy_03-05.zip
http://d-h.st/IYC
kernel-Devil_4.2.2_fassy_02-21.zip
http://d-h.st/HrT
kernel-Devil_4.2.2_fassy_02-17.zip
http://d-h.st/CvK
kernel-Devil-4.2.2-fassy-02-15. zip
http://d-h.st/4dM
Devil_4.2_fassy_02-11... Release - 12.02.13
http://d-h.st/1n6
Devil_4.2_fassy_02-06... Release - 09.02.13
http://d-h.st/wRk
::: PARANOID ANDROID :: AOSPA 3+ :: Original KERNELS :::
...TWRP Recovery w/ CM10.1 Kernel
kernel-pa_fassy-3.10-L13N-03-30.zip
has [TWRP] Team Win Recovery Project
http://d-h.st/WNo
kernel-pa_fassy-3.15-L13N-03-24.zip
has [TWRP] Team Win Recovery Project
http://d-h.st/9Mi
Older Kernel Versions
kernel-pa_fassy-3.10-L13N-03-19.zip
has [TWRP] Team Win Recovery Project
http://d-h.st/cDj
kernel-pa_fassy-3.10-L13N-03-15.zip
has [TWRP] Team Win Recovery Project
http://d-h.st/qNS
kernel-pa_fassy-3.10-L13N-03-12.zip
has [TWRP] Team Win Recovery Project
http://d-h.st/S7X
Kernel pa_fassy-3.10-LHYB_03-06.zip
http://d-h.st/QUW
kernel-pa_4.2.2_fassy_02-15.zip
http://d-h.st/8eU
kernel-pa-fassy-4.2.2-feb-10. zip
http://d-h.st/mpO
kernel-pa-fassy-4.2.1-feb-10. zip
http://d-h.st/7d9
kernel-pa-fassy-4.2.1-feb-10-blacked. zip
http://d-h.st/uNB
::: BAKED BLACKBEAN ::: Original KERNEL :::
... CWM Recovery w/ CM10.1 Kernel
kernel-fassy_baked_blackbean-8.zip
http://d-h.st/CYt
kernel-baked_fassy_blackbean-7.zip
http://d-h.st/Oiz
::: AOKP ::: Original KERNEL :::
... multiple combinations
kernel-bbAokp_linaro_03-13.zip
[ kernel-Devil_4.2.2_fassy_03-06 notta's PA]
http://d-h.st/zn8
kernel-aokp-fassy_PUB_Feb-3.zip
http://d-h.st/B1J
(Devil kernel w/ cwm recovery)
kernel-aokp-fassy_PUB_Jan-17-13. zip
http://d-h.st/nBu
(Devil kernel w/ cwm recovery)
::: CM 10.1 Nightly ::: Original KERNEL :::
... CWM Recovery w/ CM10.1 Kernel
kernel-cm10.1-20130327.zip
http://d-h.st/xkk
kernel-cm10.1-20130324.zip
http://d-h.st/AUB
Older Kernel Versions
kernel-cm10.1-20130316.zip
http://d-h.st/LLP
kernel-cm10.1-20130314.zip
http://d-h.st/w5z
kernel- cm-10.1-20130313.zip
http://d-h.st/rZr
Kernel-cm-10.1-20130307.zip
http://d-h.st/4Ox
kernel-cm-10.1-20130224.zip
http://d-h.st/cai
kernel-cm-10.1-20130218.zip
http://d-h.st/D68
kernel-cm-10.1-20130217.zip
http://d-h.st/PZK
::: Avatar Rom ::: Original KERNELS :::
... CWM Recovery w/ CM10.1 Kernel
kernel-AvatarRom-4.2.2-cm-2.0b_02-25.zip
http://d-h.st/99l
::: Slim Bean - Fascinate ::: Original KERNELS :::
... CWM Touch Recovery w/ CM10.1 Kernel
Kernel-Slim-Fassy.2.7_03-24.zip
http://d-h.st/r32
kernel- Slim-Fassy-4.2.2.build.2.1-03-18.zip
http://d-h.st/Wtb
kernel- Slim-Fassy-4.2.2.build.2.1-03-17.zip
Description: has cwm touch recovery
http://d-h.st/NAO
::: LiquidSmooth ::: Original KERNELS :::
...
kernel-fassy-Liquid-JB-v2.2.zip
http://d-h.st/oL2
---- Devil kernel Source w/standard cwm recovery
::: Beanstalk ::: Original KERNELS :::
... CM kernel w/ TWRP 2.5 recovery, w/adb
Kernel-fassy-BeanStalk1.200-4-23.zip
http://d-h.st/ox7
---- CM kernel, twrp 2.5 recovery
Kernel-fassy-BeanStalk1.200-4-23.zip
http://d-h.st/YYr
---- CM kernel, twrp 2.5 recovery, w/adb fixed
::: ParanoidKANGdroid ::: Original KERNELS :::
...Devil kernel w/ twrp 2.5 recovery
Kernel_ParanoidKANGdroid-2.3.3_4-26-fassy.zip
http://d-h.st/N9i
Devil kernel [4-26] w/ twrp 2.5 recovery w/adb fixed
::: Domination ::: Original KERNELS :::
Kernel_ Domination_Fassy_6_10_13.zip
Kernel_ Domination_Fassy_6_10_13.zip - 11.35 MB
... cwm recovery w/ unjust dev modded kernel
::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: :::::::::::::::::
Credits:
AOSP, Cyanogenmod, jt1134, AOKP, APSPA, Team Baked, DerTeufel1980, Stephen.k.spear, makelegs, Notta, LasVegasRomeo, Unjustified Dev, BDogg718, bbrad, the B-Team, other developers, users, supporters and anyone else that has helped out!
::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: :::::::::::::::::
Here is the 'xl mem' 396 setting to add .. in the mcTweaker ® root .. init.d settings
>>>>> >>>> >>>
Here is the 'xl mem' setting to add .. in the mcTweaker ® root .. init.d settings
Choose
Script Manager
Choose
|| System Auto run ||
choose || 98mctweaks ||
Edit
copy and paste this information below | when done | tap back button (once or twice) | it will ask to Save Changes | choose Yes...
Here is the 'xl mem' 396 setting to add
:::::::
# RAM settings
echo 1 > /sys/kernel/bigmem/enable
echo 1 > /data/local/devil/bigmem
# end RAM settings
::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: :::::::::::::::::
Here is the 'big mem' 408 setting to add .. in the mcTweaker ® root .. init.d settings
>>>>> >>>> >>>
Here is the 'big mem' setting to add .. in the mcTweaker ® root .. init.d settings
Choose
Script Manager
Choose
|| System Auto run ||
choose || 98mctweaks ||
Edit
copy and paste this information below | when done | tap back button (once or twice) | it will ask to Save Changes | choose Yes...
Here is the 'big mem' 408 setting to add
:::::::
# RAM settings
echo 2 > /sys/kernel/bigmem/enable
echo 2 > /data/local/devil/bigmem
# end RAM settings
::::::::::::::::: ::::::::::::::::: ::::::::::::::::: ::::::::::::::::: :::::::::::::::::
I'm seeing memory levels on PA (AOSPA)::
Stock -- 383
XL -- 396
BigMem -- 408 -- (does break 720 video recording)
>>>>> >>>> >>>
.
Lots of good info here man. thanks.
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
Great thread
Sent from my SCH-I500 using Tapatalk 2
Sweet thread! I really thought that we needed a standalone version.
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
Indeed worthy of note...
Sent from my SCH-I500 using xda app-developers app
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.
New updated kernels in the OP
If ya happen to see a link not matched up to the name for it please let me know so i can fix
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
More new kernels up in OP
kernel-Devil_4.2.2_fassy_02-17.zip
kernel-pa_4.2.2_fassy_02-15.zip
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
This is a great collection you've got here! So the lists you have above that say, for instance black beanmtd kernel is the stock one in case I would need to return to it if devil kernel gets wonky?
Sent from my SCH-R530U using Tapatalk 2
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
trvbone said:
This is a great collection you've got here! So the lists you have above that say, for instance black beanmtd kernel is the stock one in case I would need to return to it if devil kernel gets wonky?
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
Exactly :thumbup:
.
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
OK what do you recommend for optimal settings in bb7? I've discovered the music skipping issue came back right after I flashed devil kernel, with some trial and error I settled on interactive and cfq setup, I haven't noticed any garbled music issues since I stick with these settings. I just wish I knew what was causing this because I would like to use other governors and such.
Sent from my SCH-R530U using Tapatalk 2
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
trvbone said:
OK what do you recommend for optimal settings in bb7? I've discovered the music skipping issue came back right after I flashed devil kernel, with some trial and error I settled on interactive and cfq setup, I haven't noticed any garbled music issues since I stick with these settings. I just wish I knew what was causing this because I would like to use other governors and such.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
I use sio and smartassv2 I've never ever had problems with that setup so I'm keeping it lol
Sent from my SCH-I500 using Tapatalk 2
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
bbrad said:
I use sio and smartassv2 I've never ever had problems with that setup so I'm keeping it lol
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
It's just odd because right after I put devil kernel on my album art gets all blurred when using PowerAmp then I get garbled music. But I'll keep experimenting, are you oc'd all the way to 1400?
Sent from my SCH-R530U using Tapatalk 2
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
trvbone said:
It's just odd because right after I put devil kernel on my album art gets all blurred when using PowerAmp then I get garbled music. But I'll keep experimenting, are you oc'd all the way to 1400?
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
Yep
Sent from my SCH-I500 using Tapatalk 2
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
I'm pretty sure I have it completely figured out I use MediaMonkey on my PC and when I tag the album art sometimes it saved into the folder. When I transfer the specific folder with the music that I want on to my mesmerize that album art jpg comes with. I believe the problem is I use very high resolution album art images on my PC and my sd card is having issues reading that part in power amp. So I deleted all album art images from my PC and reset power amp to download album art and prefer downloaded album art in player. No more skipping issues as of yet!
Sent from my SCH-R530U using Tapatalk 2
trvbone said:
OK what do you recommend for optimal settings in bb7? I've discovered the music skipping issue came back right after I flashed devil kernel, with some trial and error I settled on interactive and cfq setup, I haven't noticed any garbled music issues since I stick with these settings. I just wish I knew what was causing this because I would like to use other governors and such.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
I don't really thing there is 1 overall optimal setting,,,, every phone and personal setting may and usually does need the setup different.
bbrad has made a good recommendation though
That is the fun of having all the options of the Devil Kernel,,, to try and test,,, ,,,
"I/O schedulers" and "governors" and the "SD read ahead" tweaks all effect how our phones perform,,, ,,, and with production tolerances SD speeds are all over the place no 2 are alike , just like snowflakes,
check to OP I just updated it with some new links in the :: "" Interested in more about :: schedulers and governors"" section
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
So if I have a class 6 SanDisk 64gb what should I set read ahead to? And does this use more ram or what resources does it affect?
Sent from my SCH-R530U using Tapatalk 2
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
trvbone said:
So if I have a class 6 SanDisk 64gb what should I set read ahead to? And does this use more ram or what resources does it affect?
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
Hold on I think I may can get you a little something that can solve your problems
Sent from my SCH-I500 using Tapatalk 2
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
Try this little modified mod here and see if it solves your problems
http://www.mediafire.com/?xmpfl7zx6wzjh3c
Sent from my SCH-I500 using Tapatalk 2
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
bbrad said:
Hold on I think I may can get you a little something that can solve your problems
Sent from my SCH-I500 using Tapatalk 2
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
Try this little modified mod here and see if it solves your problems
http://www.mediafire.com/?xmpfl7zx6wzjh3c
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Do you have a brief description
Sent from my SCH-R530U using Tapatalk 2
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
trvbone said:
Do you have a brief description
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
Yep it should fix your issues and make your device kick ass lol it Ramps up the RAM and CPU a bit when playing music to make it clear, crisp and to avoid skipping it also does a lot of other little nitty gritty things just try it and.see.if it works
Sent from my SCH-I500 using Tapatalk 2
Re: [Kernels] Flashable & [Tweaks] Jellybean 4.2.x
bbrad said:
Yep it should fix your issues and make your device kick ass lol it Ramps up the RAM and CPU a bit when playing music to make it clear, crisp and to avoid skipping it also does a lot of other little nitty gritty things just try it and.see.if it works
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Will do soon when I get a sec at work that's where I do most of my tweaking lol I'm a horrible employee
Sent from my SCH-R530U using Tapatalk 2
CyanAOSPThis is the ported version of [ROM][JB][4.2.2][04/08/13] CyanAOSP v4.0.0 [Stable | For Gaming] All the hard work was done by ts1506, Spam his thanks button! I just ported this amazing ROM to our Cappy!As with any ROM, I am not responsible for any bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
This ROM will come in two versions, one will be based on CM10.1, and the other will be based on Supernexus. Both versions will come with the Devil Kernel. I am by no means a developer and I will only update the ROM when and if ts1506 updates the i9000 thread.
Features!
Fast, stable and intended for gamers
Built from CM10.1 source with GCC 4.6 with O3 optimizations, heavily debloated , almost no 3rd party apps pre-installed
Version with SuperNexus Source is also available.
CyanCore Kernel included.
Additional tweaks ( vary from version to version )
For those people who love ROMs with lots of themes , customizations , apps etc , please leave now , you will be disappointed , this ROM is not for you.
Known Issues
For the SuperNexus version, sometimes the background of pop up dialogs are transparent. (FIX: Reboot your phone)
InstallationBack up the EFS folder.
Reboot into Recovery
Wipe data/Factory reset
Wipe cache
Advanced -> Wipe dalvik cache
Mounts and Storage -> format system
Flash Cyan-AOSP ROM
Flash Cyan-AOSP Gapps
Flash Cyancore Kernel
Reboot.
First boot may take some time, be patient.
Set up the ROM and leave it alone for 10-15 mins.
Reboot again and enjoy.
Downloads
CM Based
SuperNexus Based
Cyan-AOSP Gapps
Cyancore Kernel
Credits
ts1506 (For Original ROM
Pawitp (For CM10.1 Base)
DerTeufel1980 (For Devil Kernel)
Mortal Eternity (For testing)
fishears
Lenarox
mnazim
SlimTeam
DerTeufel1980
kasper_h
zeppellinrox
slaid480
alberto96
darkargon
atomixxx
If i'm missing anyone, PM me asap!
download galaxysmtd version and then change the kernel to captivate kernel,so everything is OK,...
Sent from my SGH-I897 using xda premium
Does that work on every rom????
Sent from my SGH-I897 using xda premium
aliver.dun said:
download galaxysmtd version and then change the kernel to captivate kernel,so everything is OK,...
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
what?
No issues noticed with this ROM, it's like light version of CM10.1, very good. :good:
I was playing with this ROM for couple of days, running all kind of benchmarks and some games that show FPS. I don't know what "For Gaming" means, but the results I got are the same with CM 10.1.2, with very small variations. Included Devil kernel is very old (from Feb 2013), I was using extracted Devil (from Jul 2013). CyanCore kernel (modified Semaphore) from the same dev makes no difference in benchmark results.
Val D. said:
I was playing with this ROM for couple of days, running all kind of benchmarks and some games that show FPS. I don't know what "For Gaming" means, but the results I got are the same with CM 10.1.2, with very small variations. Included Devil kernel is very old (from Feb 2013), I was using extracted Devil (from Jul 2013). CyanCore kernel (modified Semaphore) from the same dev makes no difference in benchmark results.
Click to expand...
Click to collapse
this rom is based on 4.2.2...
I know. CM 10.1.2 is Android 4.2.2 too.
Val D. said:
I know. CM 10.1.2 is Android 4.2.2 too.
Click to expand...
Click to collapse
ahhh! my bad! sorrry! and to get best results use cyan core kernel as it's been optimized for it.
e1 i tried to fiddle around some benchmarks and fps but there aint any increase in them.....
let me know if you hv achieved high benchmarks n in which config
I am using the SuperNexus based ROM of CyanAOSP and it gives me number not verified error(then asks to enter my number again instead of verifying it by sending SMS or call verification) on whatsapp. I get that error only with this ROM no matter what ROM I come to this from. Tried flashing the ROM twice, clearing cache dalvik cache, uninstalling, reinstalling whatsapp, deleting data, almost everything. I haven't even installed xposed framework, no modules, nothing. No mod.
I have used this ROM in past and never had any problem.
Anyone know why this is happening?
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
kernel
abhishekr700 said:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
Click to expand...
Click to collapse
purekat is build on base as AOSP..... so u will need to flash percy or black reactor since hell's fusion supports stock base roms:laugh:
abhishekr700 said:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
Click to expand...
Click to collapse
not sure about purekat. I tried hells fusion on reincarnation (cm7). .device boots... but wifi & bluetooth won't work ... guess it's same for purekat
hells fusion #50 can boot cm7/aosp but it does not have the correct moduals for wifi/bluetooth for use on cm7/aosp therefore if you want a fully operational phone you need to use a kernel built for cm7/aosp like percys or black reactor
better to use cm kernel !!
Boot loop
NOPE ..... You can try Percy kernal but Hells fusion will Cause Boot loop
Sanjuujosephh said:
NOPE ..... You can try Percy kernal but Hells fusion will Cause Boot loop
Click to expand...
Click to collapse
hells fusion will not cause a boot loop - hells fusion can boot cm and aosp based roms but does not contain the moduals needed for wifi and bluetooth to work (it contains moduals for use on stock based only) hense why you need a cm/aosp kernel for full phone functions
I prefer u use BlackReactor . i have use it once .
[iPhone 6] or [Samsung Galaxy S5]
>>SG Y - Hyperion 8 Rom<<
>>SG S3 mini - Official Stock Rom<<
I think wifi and bluetooth dont work because oF drivers
Anyway tell me the correct procedure for flashing blackreactor kernel along with links
And yes if I just want to feel the rom not using wifi and bluetooth then can I flash rom on hells kernel
abhishekr700 said:
I think wifi and bluetooth dont work because oF drivers
Anyway tell me the correct procedure for flashing blackreactor kernel along with links
And yes if I just want to feel the rom not using wifi and bluetooth then can I flash rom on hells kernel
Click to expand...
Click to collapse
like iv explained many times in this thread you cannot use hells fusion as it does not contain the wifi and bluetooth modual for use on cm7/aosp - that kernel is for stock roms only
hells fusion will boot it but you may find things start force closing on you and not work properly with not all phone functions working
you MUST use percys kernel or black reactor kernel if you are using cm7/aosp to get full phone functions - network wifi bluetooth etc
all kernels are in the dev section - a simple search and you will find it - in fact black reactor kernel is currently on page one of the dev thread so not really much searching required
and you just flash it in cwm with system mounted then reboot to recovery and format system data cache then mount system data cache then flash your rom zip
Go for Black Heart
marcussmith2626 said:
like iv explained many times in this thread you cannot use hells fusion as it does not contain the wifi and bluetooth modual for use on cm7/aosp - that kernel is for stock roms only
hells fusion will boot it but you may find things start force closing on you and not work properly with not all phone functions working
you MUST use percys kernel or black reactor kernel if you are using cm7/aosp to get full phone functions - network wifi bluetooth etc
all kernels are in the dev section - a simple search and you will find it - in fact black reactor kernel is currently on page one of the dev thread so not really much searching required
and you just flash it in cwm with system mounted then reboot to recovery and format system data cache then mount system data cache then flash your rom zip
Click to expand...
Click to collapse
flashed blackreactor kernel through odin and phone does not boot past kernel logo even after 20 min
gonna try through cwm recovery....will update soon
and one more thing is v5 of blackreactor kerneel stable??
abhishekr700 said:
flashed blackreactor kernel through odin and phone does not boot past kernel logo even after 20 min
gonna try through cwm recovery....will update soon
and one more thing is v5 of blackreactor kerneel stable??
Click to expand...
Click to collapse
why are you using v5 of the kernel for cm/aosp rom?
please read the thread fully!!
v5 is for stock rom (doesnt work on all basebands so use v4)
cm is for cm roms and aosp
if you are using cm7 or an aosp rom you MUST use a cm kernel!!!
marcussmith2626 said:
why are you using v5 of the kernel for cm/aosp rom?
please read the thread fully!!
v5 is for stock rom (doesnt work on all basebands so use v4)
cm is for cm roms and aosp
if you are using cm7 or an aosp rom you MUST use a cm kernel!!!
Click to expand...
Click to collapse
so i can only use cm kernel not even v4 ?
abhishekr700 said:
so i can only use cm kernel not even v4 ?
Click to expand...
Click to collapse
I will say it one last time
if you are using cm7/aosp you MUST use a kernel built for cm7/aosp
that means you cannot use a kernel built for stock (they use different mount systems hense non booting)
To make it clearer - no you cannot use v5 or v4 of black reactor kernel on cm/aosp as they are stock kernels
You MUST use the cm version of black reactor!
marcussmith2626 said:
I will say it one last time
if you are using cm7/aosp you MUST use a kernel built for cm7/aosp
that means you cannot use a kernel built for stock (they use different mount systems hense non booting)
To make it clearer - no you cannot use v5 or v4 of black reactor kernel on cm/aosp as they are stock kernels
You MUST use the cm version of black reactor!
Click to expand...
Click to collapse
Lull, thats frustrating enough...
however,
Read the op carefully guys,
ops are written very carefully.
so,
CM version == ONLY AND ONLY CM/AOSP roms.
v5 and v4 == Only for stock based roms... (However, they can booth both aosp and cm7, but ur wifi or bluetooth wont work,) pick ur poison
AH..FINALLY
Ok
i got my answer
mods please close this thread
i have a custom purekat1.0 rom ,but when i try flash blackreactor kernel it stuck at logo.i try to revert back by hell fusion but it show many error like E:can't mount/system .plz anyone help me.i really don't know wht to do now
wanyakuza said:
i have a custom purekat1.0 rom ,but when i try flash blackreactor kernel it stuck at logo.i try to revert back by hell fusion but it show many error like E:can't mount/system .plz anyone help me.i really don't know wht to do now
Click to expand...
Click to collapse
i think purekat is aosp based rom .and for that u need to use the cm version of blackreactor kernel...hope it helps
abhishekr700 said:
i think purekat is aosp based rom .and for that u need to use the cm version of blackreactor kernel...hope it helps
Click to expand...
Click to collapse
i have flash blackreactor kernel but it stuck at logo ,now i try revert back to stock but it does not work.plz help me
wanyakuza said:
i have flash blackreactor kernel but it stuck at logo ,now i try revert back to stock but it does not work.plz help me
Click to expand...
Click to collapse
read again did u flash the cm version of kernel??
abhishekr700 said:
read again did u flash the cm version of kernel??
Click to expand...
Click to collapse
the black reactor kernel based on purekat1.0
first tell me whether u used the purekat based on aosp or based on stock.this information can be found in the thread from where u downloaded the purekat rom.then there are 2 types of kernel==
1.for stock based rom-->this kernel can boot stock based roms.like hells fusion
2.cm/aosp->this kernel can boot cyanogenmoad or aosp based rom.
download the required version of the kernel and flash it.
thats all
press thanks if i helped
abhishekr700 said:
first tell me whether u used the purekat based on aosp or based on stock.this information can be found in the thread from where u downloaded the purekat rom.then there are 2 types of kernel==
1.for stock based rom-->this kernel can boot stock based roms.like hells fusion
2.cm/aosp->this kernel can boot cyanogenmoad or aosp based rom.
download the required version of the kernel and flash it.
thats all
press thanks if i helped
Click to expand...
Click to collapse
I use purekat base stock n before I flash it I was on stock kernel.I want to update to purekat1.5 n I read the thread that must flash black reactor or Percy kernel first.so I flash the black reactor n I get stuck on boot.I don't know what the problem.when try revert back to stock it still show black reactor kernel on boot.plz help me,BTW just now I try wipe data n cache then reboot but still not work
plz guy help me
plz anyone know how to revert to stock kernel ,I have try hell fusion but it does not work.I don't have PC at home.
wanyakuza said:
plz anyone know how to revert to stock kernel ,I have try hell fusion but it does not work.I don't have PC at home.
Click to expand...
Click to collapse
if you flash hells fusion kernel it has the option to flash stock kernel
however if you have flashed black reactor cm and formatted system data cache you will now be on an ext system partition which stock kernel does not support so your phone will not boot
you will need to either use a rom and kernel that supports ext system partions like cm7 or flash stock rom via odin to convert back to rfs
if you are still on rfs you can use any stock based rom/kernel
First make sure which rom have you installed.
PureKat (AOSP)
Purekat Extreme (Stock)
Flash stock based kernels for stock based roms and cm based kernels for aosp or cm based roms.
I have try wipe data n cache ,I can mount data n SD card but not on mount system.I try format system it show skipping n done.now I don't what can I do bcoz I don't have PC at home,so guy can anyone help me to go stock kernel without use Odin.BTW I have try restore system but it give error
san122 said:
First make sure which rom have you installed.
PureKat (AOSP)
Purekat Extreme (Stock)
Click to expand...
Click to collapse
purekat1.0 , I have wrong step bcoz I thought if want go for update must flash black reactor or Percy.now get stuck on boot.plz help me
marcussmith2626 said:
if you flash hells fusion kernel it has the option to flash stock kernel
however if you have flashed black reactor cm and formatted system data cache you will now be on an ext system partition which stock kernel does not support so your phone will not boot
you will need to either use a rom and kernel that supports ext system partions like cm7 or flash stock rom via odin to convert back to rfs
if you are still on rfs you can use any stock based rom/kernel
Click to expand...
Click to collapse
what is rfs?BTW in hell fusion it has ext format right?I always get error when try mount system.
wanyakuza said:
what is rfs?BTW in hell fusion it has ext format right?I always get error when try mount system.
Click to expand...
Click to collapse
rfs - recursive file system
Hells fusion supports ext4 partitions....
Sent from my Xperia E1 dual using Tapatalk
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
---------- Post added at 06:33 PM ---------- Previous post was at 06:32 PM ----------
wanyakuza said:
purekat1.0 , I have wrong step bcoz I thought if want go for update must flash black reactor or Percy.now get stuck on boot.plz help me
Click to expand...
Click to collapse
Did you flash CM-only kernels?
Sent from my Xperia E1 dual using Tapatalk
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
luqman98 said:
rfs - recursive file system
Hells fusion supports ext4 partitions....
Sent from my Xperia E1 dual using Tapatalk
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
---------- Post added at 06:33 PM ---------- Previous post was at 06:32 PM ----------
Did you flash CM-only kernels?
Sent from my Xperia E1 dual using Tapatalk
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
Click to expand...
Click to collapse
I flash CMblk-ext on purekat ROM thread,now don't boot up n only show black reactor kernel on my screen
wanyakuza said:
I flash CMblk-ext on purekat ROM thread,now don't boot up n only show black reactor kernel on my screen
Click to expand...
Click to collapse
go into cwm
format system data cache
mount system data cache
flash cm7 rom zip
restart
note if using a rom that is based on bieltv.3 cm7 you need to use bieltv.3 kernel else wifi and bluetooth will not work
marcussmith2626 said:
go into cwm
format system data cache
mount system data cache
flash cm7 rom zip
restart
note if using a rom that is based on bieltv.3 cm7 you need to use bieltv.3 kernel else wifi and bluetooth will not work
Click to expand...
Click to collapse
but I don't have cm7 ROM ,n cannot format system.can u guide me how to flash DXMJ1 by odin?
wanyakuza said:
but I don't have cm7 ROM ,n cannot format system.can u guide me how to flash DXMJ1 by odin?
Click to expand...
Click to collapse
you said you had purekats - if its the version based on aosp or cm7 then you do have a rom that is bootable on a cm7 kernel on ext
anyway
guide for odin is on my firmware thread at top of dev section - you just have to read it
marcussmith2626 said:
you said you had purekats - if its the version based on aosp or cm7 then you do have a rom that is bootable on a cm7 kernel on ext
anyway
guide for odin is on my firmware thread at top of dev section - you just have to read it
Click to expand...
Click to collapse
I only have purekat1.5 n I have delete purekat1.0 bcoz I have make nandroid backup,can I flash it by purekat1.5?BTW if I use Odin to flash the new baseband are my phone lost root or something else?
hello all xda members
I need little advice on my mobile phone
I buy a new galaxy note 2 n7100 firmware N7100XXUENC3 on android 4.3
now I want to swap my internal 2 external SD I read that I need a custom kernel or rom with Init.D support
but I cant a kernel to work on my mobile device what I have try
Perseus Kernel (only black screen after Samsung logo)
speedwizz kernel N2 (works but I get kernel panic random reboots)
kernel Asylum (not work black screen)
roms I have try to swap sd bot non its working
miui v5
omega roms
cayanogenmod 11
Hurricane v12
but witch kernel or rom need I to use that work and swap my sd i need some extra memory
Devil Kernel has init D support, try it
McLaren__F1 said:
Devil Kernel has init D support, try it
Click to expand...
Click to collapse
I have it running now only I cant see my storage using pc with this kernel
and no swap support I cant swap my external to internal SD
I have try over 10 guides but not 1 its working
did you know a way to swap my SD card
Perseus is only for 4.1.2 not 4.3. Agni kernel has the memory swap built in so that is your best bet. Have a look at foldermount as well, that is good for moving files to ext so card
Sent from my GT-N7105 using Tapatalk