This is a great forum hopefully someone can help a newbie out. Apologies in advance for long post (but better too much info than too less).
I've had a search through the forums and basically can't find a definitive answer. All I want to do is debrand my Galaxy S4 I9505 (info below) and upgrade STOCK firmware without rooting (if possible).
Just like here: http://forum.xda-developers.com/showthread.php?t=2262607 Tried to follow thread but get ODIN fail.
Phone info:
Galaxy S4 I9505
Original O2 supplied (and branded) UK
Unlocked and now on three network.
AP: I905XXUBMF8
CP:I9505XXUAMDC
CSC: I9505O2UBMGI
Android Ver: 4.2.2
Baseband version: I9505XXUAMDC
Kernel version: 3.4.0 -917495
Any more info needed just ask.
Tried to follow steps in above thread.
Backed up using Kies
Restarted computer ensuring no KIES services running
connect phone in download mode to ODIN 3.07
Using this FW from Sammobile: I9505XXUFNB8_I9505BTUFNB3_I9505XXUFNB8_HOME.tar.md5
Got ODIN failure:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB8_I9505BTUFNB3_I9505XXUFNB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Removed!!
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
NO PIT so got CSB_signed_Fusion3_EUR_0325_V2.pit file
and reran ODIN.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB8_I9505BTUFNB3_I9505XXUFNB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!
Tried on 2 different PC using different (official) cables still same issue.
Phone works fine (download and recovery accessible).
Any help appreciated.
Try other ODIN version... Im using this one -> HERE
Related
Hi guys,
I've tried the search and google multiple times, but the chainfire (http://forum.xda-developers.com/showthread.php?t=2219803) method for rooting phones doesn't seem to work. I've used it successfully with my galaxy s2 in the past, but the s4 doesn't seem to work. Not sure if it's an issue with the Australian version of the device. If someone could point me in the right direction, I would be eternally grateful.
Model - GT-I9505
Android Version - 4.2.2
Baseband version I9505DVUBMG1
Kernel version
3.4.0-1029328
[email protected] #1
Build number - JDQ39.I9505XXUBMG4
SELinux status - Permissive
Secure boot status - Samsung
Thanks all..
Where's the problem? What appears when u root it? or dont appears nothing? Sometimes u have to do the process 2 times for see the SuperSu app there, u will have to update your binaries then and reboot. Good luck :highfive:
thanks for the reply, Joku1981.
The odin program says that I was unable to flash ...
Log:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello,
I have a GT-I9505 which was under 4.3
I did the update OTA 4.4.2 and redemarage bootloop
impossible to get to recovery I left a red message at the top: moviNAND Checksum Confirmation Fail
I try to flash via odin with the latest firmware 4.4.2 XEF and here the result:
Enter CS for MD5 ..
Check MD5 .. Do not unplug the cable ..
Please wait ..
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully ..
Leave CS ..
Added!
Odin v.3 engine (ID: 5) ..
File analysis ..
SetupConnection ..
Initialzation ..
Get PIT for mapping ..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
Do you have any ideas?
Download and unzip this file: HERE and flash it like in the pic attached (+ the stock firmware u downloaded). Reboot manually then.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
chtiti said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
Click to expand...
Click to collapse
if you use single tar file do not check re-partition option
open odin use default auto-reboot and F.reset time only
OTA update samsung missed
Hello,
same result.
Run as administrator (Right click on the icon)
Use Odin 3.07
If that doesn't work then download a 4.3 file and flash that onto the device.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
OTA update samsung missed
Do you think the JTAG can solve my problem?
Did you try basic stuff like:
A different usb cable
A different usb port
A different pc?
You are not running Odin on a virtual machine are you?
Did you try redownloading the firmware? Did you try other firmwares?
OTA update samsung missed
I tried everything! Nothing works!
Did you try flashing a custom recovery and then try to flash a custom rom from there?
OTA update samsung missed
re,
How do I flash a custom rom without access to recovery?
OTA update samsung missed
The S4 has gone on a JTAG date.
Told you please uncheck re-partition option...you use single file
Sent from my GT-I9500
chtiti said:
re,
How do I flash a custom rom without access to recovery?
Click to expand...
Click to collapse
Can't you reflash the recovery?
Hy.
So I want to flash my Galaxy S4 (GT-I9505) with Odin 3.07 and NE8 Non-rooted ROM. Before I used pre-rooted ROM (NC9). Before the Odin mode I did a factory reset with PhilZ Touch with the option that said choose it if I want to flash a new ROM. So I did that.
Then I tried to flash and get this from odin:
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNE8_I9505VFGGNE2_I9505XXUGNE8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Complete(Write) operation failed.
<ID:0/017> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Then nothing just a FAIL text. What is the problem? I tried to add a PIT file (CSB_signed_Fusion3_EUR_0325_V2.pit) but I got the same results. Recovery is still working.
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Altorn91 said:
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Click to expand...
Click to collapse
Install Kies start it and connect the phone to the pc by the stock USB cable, it should detect the phone and offer you to repair it.
Altorn91 said:
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Click to expand...
Click to collapse
Hi mate,
Easiest way out is to reflash stock rom again ( i can see your knox bit is set already) follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
There you can find PIT files for your phone , flash same type of rom you had or newer , older stock roms will fail
MAX 404 said:
Hi mate,
Easiest way out is to reflash stock rom again ( i can see your knox bit is set already) follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
There you can find PIT files for your phone , flash same type of rom you had or newer , older stock roms will fail
Click to expand...
Click to collapse
I solved using a different cable.
Altorn91 said:
I solved using a different cable.
Click to expand...
Click to collapse
Great news mate
Hello,
I have SCL22 KDDI AU From Japan. Status of my phone is rooted and DarkLord V2.2 Rom installed noe.
My SIM Card not detected because when I install the ROM there is no XSE CSC. I try CSC Changer, Region Lock Away,
and others apk but none of it working.
Yesterday I try to flash SCL22KDUBND3_SCL22KDIBND3_KDI from odin 3.07 & 3.09, but FAIL.
<ID:0/024> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCL22KDUBND3_SCL22KDIBND3_SCL22KDUBND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/024> Odin v.3 engine (ID:24)..
<ID:0/024> File analysis..
<ID:0/024> SetupConnection..
<ID:0/024> Initialzation..
<ID:0/024> Get PIT for mapping..
<ID:0/024> Firmware update start..
<ID:0/024> sbl1.mbn
<ID:0/024> NAND Write Start!!
<ID:0/024> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Any idea friends? please help me...