Hi guys,
I've tried the search and google multiple times, but the chainfire (http://forum.xda-developers.com/showthread.php?t=2219803) method for rooting phones doesn't seem to work. I've used it successfully with my galaxy s2 in the past, but the s4 doesn't seem to work. Not sure if it's an issue with the Australian version of the device. If someone could point me in the right direction, I would be eternally grateful.
Model - GT-I9505
Android Version - 4.2.2
Baseband version I9505DVUBMG1
Kernel version
3.4.0-1029328
[email protected] #1
Build number - JDQ39.I9505XXUBMG4
SELinux status - Permissive
Secure boot status - Samsung
Thanks all..
Where's the problem? What appears when u root it? or dont appears nothing? Sometimes u have to do the process 2 times for see the SuperSu app there, u will have to update your binaries then and reboot. Good luck :highfive:
thanks for the reply, Joku1981.
The odin program says that I was unable to flash ...
Log:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
So I've been itching to get the new KitKat update that ATT released the other day for the GS4's but since I'm rooted, I of course cannot achieve that until I roll back to 4.2 with the Odin method. The only problem is..I cant seem to figure out why my phone won't accept the flash process.
This is the info from Odin..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone also has some red text during the process (while its in Download mode) which says..
SW REV. CHECK FAIL : fused : 4 , Binary : 1
Not sure if that's important but the more information the better I suppose.
Anyway, if anyone has any leads or information that might be able to help me, please and thank you very much.
Cheers everyone!
-Fordo
Pretty sure you're on mk2 firmware and need these files http://forum.xda-developers.com/showthread.php?p=49687770
Thanks a bunch!
One more question, which file specifically should I be downloading from that thread?
Just making sure so I don't make any mistakes. Heh, cheers mate.
FordoGreenman said:
Thanks a bunch!
One more question, which file specifically should I be downloading from that thread?
Just making sure so I don't make any mistakes. Heh, cheers mate.
Click to expand...
Click to collapse
Just the all-in-one for simplicity. Instruction on how to use the file is in bottom of the post of that thread.
This is a great forum hopefully someone can help a newbie out. Apologies in advance for long post (but better too much info than too less).
I've had a search through the forums and basically can't find a definitive answer. All I want to do is debrand my Galaxy S4 I9505 (info below) and upgrade STOCK firmware without rooting (if possible).
Just like here: http://forum.xda-developers.com/showthread.php?t=2262607 Tried to follow thread but get ODIN fail.
Phone info:
Galaxy S4 I9505
Original O2 supplied (and branded) UK
Unlocked and now on three network.
AP: I905XXUBMF8
CP:I9505XXUAMDC
CSC: I9505O2UBMGI
Android Ver: 4.2.2
Baseband version: I9505XXUAMDC
Kernel version: 3.4.0 -917495
Any more info needed just ask.
Tried to follow steps in above thread.
Backed up using Kies
Restarted computer ensuring no KIES services running
connect phone in download mode to ODIN 3.07
Using this FW from Sammobile: I9505XXUFNB8_I9505BTUFNB3_I9505XXUFNB8_HOME.tar.md5
Got ODIN failure:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB8_I9505BTUFNB3_I9505XXUFNB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Removed!!
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
NO PIT so got CSB_signed_Fusion3_EUR_0325_V2.pit file
and reran ODIN.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB8_I9505BTUFNB3_I9505XXUFNB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!
Tried on 2 different PC using different (official) cables still same issue.
Phone works fine (download and recovery accessible).
Any help appreciated.
Try other ODIN version... Im using this one -> HERE
Hello,
I have a GT-I9505 which was under 4.3
I did the update OTA 4.4.2 and redemarage bootloop
impossible to get to recovery I left a red message at the top: moviNAND Checksum Confirmation Fail
I try to flash via odin with the latest firmware 4.4.2 XEF and here the result:
Enter CS for MD5 ..
Check MD5 .. Do not unplug the cable ..
Please wait ..
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully ..
Leave CS ..
Added!
Odin v.3 engine (ID: 5) ..
File analysis ..
SetupConnection ..
Initialzation ..
Get PIT for mapping ..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
Do you have any ideas?
Download and unzip this file: HERE and flash it like in the pic attached (+ the stock firmware u downloaded). Reboot manually then.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
chtiti said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
Click to expand...
Click to collapse
if you use single tar file do not check re-partition option
open odin use default auto-reboot and F.reset time only
OTA update samsung missed
Hello,
same result.
Run as administrator (Right click on the icon)
Use Odin 3.07
If that doesn't work then download a 4.3 file and flash that onto the device.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
OTA update samsung missed
Do you think the JTAG can solve my problem?
Did you try basic stuff like:
A different usb cable
A different usb port
A different pc?
You are not running Odin on a virtual machine are you?
Did you try redownloading the firmware? Did you try other firmwares?
OTA update samsung missed
I tried everything! Nothing works!
Did you try flashing a custom recovery and then try to flash a custom rom from there?
OTA update samsung missed
re,
How do I flash a custom rom without access to recovery?
OTA update samsung missed
The S4 has gone on a JTAG date.
Told you please uncheck re-partition option...you use single file
Sent from my GT-I9500
chtiti said:
re,
How do I flash a custom rom without access to recovery?
Click to expand...
Click to collapse
Can't you reflash the recovery?
Alright so I bricked my s4 while rooting it, It says something happened when updating the firmware, I did what people said use odin and flash to stock but i keep getting the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970CVVUFNC6_R970CCRIFNC6_R970CVVUFNC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
If anyone could help that would be great!
arkk431 said:
Alright so I bricked my s4 while rooting it, It says something happened when updating the firmware, I did what people said use odin and flash to stock but i keep getting the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970CVVUFNC6_R970CCRIFNC6_R970CVVUFNC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
If anyone could help that would be great!
Click to expand...
Click to collapse
Hi,
What stock you had and what stock rom are you trying to flash?
also check this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Its the stock file for the cricket schr970c and that threads for model specific only.
arkk431 said:
Its the stock file for the cricket schr970c and that threads for model specific only.
Click to expand...
Click to collapse
Sorry mate
i did not realice you had an S4 cricket , the thread i gave you is not for your device..
Hey Guys,
please help me, i just bricked my phone i cant boot in Rom/Recovery, only in Download Modus i can boot, but when i want to reflash a recovery (Like TWRP) it says:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM>I9505XXUHOF2_I9505OXAHOF2_DBT.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
So i downloaded an older i9505 PIT File and tried it again, but then this comes:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOF2_I9505OXAHOF2_DBT.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Samsung Galaxy S4 GT-i9505 - Android 5.01
Im using Odin v 3.09
Firmware: Germany
So i think i need a PIT File for my Version of Firmware: (Newest)I9505XXUHOF2_I9505OXAHOF2_DBT
I dont know if Im right...
Thanks for Help!
lolmann101 said:
Thanks for Help!
Click to expand...
Click to collapse
Use other USB cable or the original of Samsung.
Joku1981 said:
Use other USB cable or the original of Samsung.
Click to expand...
Click to collapse
Hello,
I tried it with the original S4 cable & with some others (HTC, NoName, etc.). It doesnt work!
lolmann101 said:
Hello,
I tried it with the original S4 cable & with some others (HTC, NoName, etc.). It doesnt work!
Click to expand...
Click to collapse
Then other USB port.
Zipped and attached PIT file for I9505XXUHOF2_I9505OXAHOF2_DBT
Downloaded directly from Samsung Kies.