Installation: HD2 stops at GSM connection - HD2 Android Q&A, Help & Troubleshooting and Genera

I have tried differents androids ROMs and all of them stucks the system at the GSM connection.
After the installation of the ROM with no problem at all, in the first boot of the installed ROM, while the initial configuration (selection of the languaje screen or Gmail Count selection screen) the system stops. Just when the icon of the GSM connection (up right) starts.
As it seems to be a radio problem I have tried differents ROM radios.
With WindowsPhone ROM, the system works without problem at all! (Just the Activation Codes... Thanks Microsoft!!!!)
May someone help me?
Thanls in advance!!!!

Don't try it with Windows Phone, try it with Windows Mobile 6.5 and make sure it's working there. Also, you could try it with the sim card out of the device. Though I'm not sure how GSM could cause the system to freeze.

I have tried with 2 differents SIMS of differents providers.
In both cases, the problem is the same: while the initial assistant of configuration the systemas starts, when the system starts with the GSM connection icon, the systems stops working.
Now I have Win 7.8 installed and everything goes fine.

Related

T-Mobile WM2003 accidentally installed onto O2 Xda

Hi everyone...I'm a newbie. Been reading all the pages but can't find answer to my q.
I installed T-Mobile ROM 4.01.16 downloaded from ROM kitchen. Unfortunately, now I cannot use the phone on my xda. It simply can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the rest works fine except it hangs sometimes.
I've tried to install new ROM, one for O2 xda but the error message below surfaced:
ERROR:Get Connection type - An existing connection was forcibly closed by the remote host
error getting connection type.
Now I'm unable to install a new ROM. Even via SD card. Please help.
PS Have also tried using xdatools to unlock. I get the same error message ie the remote host forcibly closed connection
If it's a PW10A-Model that you have try entering Wallaby Bootloader and set GSM settings manually to 900/1800. Installing the 4.01.16 ROM sets the settings to 900/1900. Maybe this is your problem...
HTH
Stefan
Same problem over here
Hello,
I also installed the t-mobile on my o2 xda accidentally,
i already put it on european band frequency 900/1800 via the wallaby editor.
But still i'm not able to put back the o2 wme 2003 on it.
any solutions for this issue ?
thanks in advance,
thomas.
Flash your ROM via SD-Card....
Thanks so much Lumpi. Now my phone works but a different problem crops up. The device once turned off, will not turn on unless I soft reset it. Also, when it is off, the phone will not ring/vibrate when there's an incoming call. The green LED flashes as usual, indicating phone is working. Any idea how to fix this? Thanks inadvance.
another Q: can I use an MMC 256MB card to flash the rom or can i only use SD card?
fadzrina said:
Thanks so much Lumpi. Now my phone works but a different problem crops up. The device once turned off, will not turn on unless I soft reset it. Also, when it is off, the phone will not ring/vibrate when there's an incoming call. The green LED flashes as usual, indicating phone is working. Any idea how to fix this? Thanks inadvance.
another Q: can I use an MMC 256MB card to flash the rom or can i only use SD card?
Click to expand...
Click to collapse
Have you used KSE Truefax? I think that is the problem with not turning on the device....
I think you can also use a MMC Card. Never tried it myself, cause i only have SD-Cards...
Stefan
I've never use Truefax eventhough I have it on the device as I cooked it in the ROM. Any other ideas? Thanks
I had the same problem with 4.1.16 and KSE. It doesn't matter if you "use" it or not. Something about KSE being cooked intothe rom stops the device from operating correctly. To date you are the 5th person I know of to have that problem. Recook the same rom less KSE, reflash, and I can almost garauntee it will work.
thank you everyone....it is indeed the KSE Truefax that was the culprit. I've since invested in a card reader/writer and a 256MB MMC card and my phone works again!
PS special thx to lumpi
tm 2003
I installed T-Mobile ROM 4.01.16 downloaded from ROM kitchen. Unfortunately, now I cannot use the phone on my XDA. It simply can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the rest works fine except it hangs sometimes.
I've tried to install new ROM, one for O2 XDA but the error message below surfaced:
ERROR: Get Connection type - An existing connection was forcibly closed by the remote host
error getting connection type.
Now I'm unable to install a new ROM. Even via SD card. ROM sets the settings to 900/1900, and I can’t get into Bootloader via SD flashing nor power, soft reset, rocker/action…Any suggestions?

network unavailable or no network ! sign

I have an O2 Atom with the following specs:
ROM 20080612B6WWE
EXTROM EX0503
RADIO R060822N_MN1ARC_RS00052
currently running on PDAVIET rom from Sonblack.
My problem is as follows:
1. when i boot up the pda everything goes smoothly except there is a network unavailable message in my home menu and a stupid "no network !" sign at the signal strength meter.
2. interestingly the green LED flashes every few seconds as if logged onto a network provider.
3. more interestingly the green LED flashes every few seconds as if logged onto a network provider even if i remove the SIM card and boot into the OS.
My previous configuration which used to work:
Original ROM from O2 Asia dependent on Windows Mobile 5.1
EXTROM EX0480
RADIO R060822N_MN1ARC_RS00049
Things I have tried to make her work:
1. Tested GSM module --> IMEI OK --> PASS
2. Tested Wifi module ---> PASS --> surfed internet using wifi --> OK
3. Tested Bluetooth module --> PASS --> sent files to another PDA --> OK
4. Tested FM radio module --> PASS --> FM radio working
5. Tested ROM checksum --> PASS
6. Flashed a dozen times using different roms and radio versions eg:
radio versions RADIO R060822N_MN1ARC_RS00052
RADIO R060822N_MN1ARC_RS00049
RADIO R060822N_MN1ARC_RS00048
RADIO R060822N_MN1ARC_RS00038
got these different roms from O2 atom wiki -- keep up the good job guys.
7. finally flashed from the latest O2 Asia provided rom --> USELESS
My theories:
1. There is no possible hardware issue with the internal antennae as i think even the wifi module shares the same antennae and wifi is working like a charm
2. There is no possiblity of a faulty SIM cause i have checked with a dozen different SIMS all of them give a no network error.
3. There is no possibilty of a Hardware error at the SIM contacts cause i can use SIM manager on all SIMS flawlessly and access contacts and sim info on all the dozen SIMS that i tested.
4. I have tested more than six SIMS in manual mode for different bands GSM 900, GSM 1800, GSM 1900 combination and auto mode ---> USELESS.
Extra Information:
1. GPRS is unable to connect --> gives some dailing error.
2. I cannot scan for available networks using manual mode -->
it shows me a scanning for all available networks dialog and then an
empty list is shown where i can select nothing.
3. I cannot scan for available networks using auto mode -->
it shows me a registering on network dialog and then a cannot register on
a selected network error.
4. All of the other SIMS are from different Network providers and are function
well in my other Nokia, Atom life phones.
I am at my wits end <----- to tell you the truth this is the fourth week i have been trying for a solution before posting all the details here.
Please share you theories, ideas, experiences with me on this thread so that other souls might be spared the mental torture of the O2 service centre and their bizzare claims.
Hoping for a solution <------ help me out
PS: Thank You for reading my post ..... your levels of Patience are increasing.
PS: I remember dropping my Atom off a height of 15ft due to which the side
bluetooth tranciever plastic cover came off ....... but hey the atom was
working after that. The real problem started after i flashed the O2 Asia
provided ROM with a some stupid localization update.
PS: Peace !
solved?
i have same problem now did u solved it?
this is my first post..but interesting, i've got the same problem.
i have ipaq 6828 which is similar to atom.the different is, my pda can detect networks in manual search..but always failed everytime i try to connect or register to the network .
..
same here...i'll inform u if find a solution, plz make sure u do the same

Unable to update ROM on HTC TouchHD

Hi all,
I have an HTC Touch HD (1.56). It was tied to Orange Poland, but I have SIM unlocked it with a web service. Now I wanted to try some different ROM (my main language is italian, but english would be fine as well -> as of now I've only been able to partially set language to italian changing registry code, but most of WM6.1 is still in polish). I have tried the HSPLWrapper_Blackstone_156OliNex.exe with no success.
If I just plug the HTC to PC USB cable, ActiveSync wakes up and connects.
I can browse inside, move files, install apps.
When I start the wrapper this is what happens:
1) with advanced USB settings ON (on HTC) the tricolour screen does NOT appear and the wrapper says Connection Error [202]. ActiveSync is ON and ready. -> if I start SSPL-Manual-TouchHD on HTC, the tricolour screen appears, the USB text appears, and on both wrapper and HTC I can see the progress bar at 0%. After a minute or so, the wrapper says there was a problem and shows the recovery procedure (I was never locked on tricolour screen, I just had to remove battery and everything was back to normal). If I try again the wrapper while the tricolour/USB screen is still there, nothing happens, and I get connection error.
2) with advanced USB settings OFF (on HTC) the tricolour screen DOES appear automatically when I start the wrapper, but no matter how fast I am pressing YES on HTC, the USB connection gets killed and ActiveSync disappears.
I have tried 2 different USB cables on different ports (no hub), rebooted PC several times. I have read the 3 wiki pages (HTC_Blackstone_Flash) and the OliNex procedure. What can I do? Can somebody please help me?
EDIT: I am trying this from Windows XP Pro up to par with WinUpdate (.NET 3.5 and everything else is there)
Thanks
You can always try USPL.
But first make sure you follow this exactly:
http://forum.xda-developers.com/showthread.php?t=505377
Hope it helps
A thread already exists for flashing difficulties. Please post your query within this thread
Ta
Rick

Phone keeps saying searching...

My Orange SPV M700 keeps saying Searching... whenever I switch the phone on and after about 5 minutes it says no signal even though the signal is actually there. The current ROM I have installed is [ROM] nAr & icke WM6.5 P3600/i [21895.5.0.90][WWE][FRA][DEU][ONLINE] the English version, and the Radio Version is 1.56.70.11. The GPS works fine and so does the Bluetooth as well as the WiFi and WLAN it also synchronising to Activesync ok. I also have the Manila Version 1.2.1913.1350 if this helps, I seriously need the phone working otherwise I'm kind of stuck. I also used the Free HTC Trinity SIM & CID Unlocker from Pof located here http://forum.xda-developers.com/showthread.php?t=293957&highlight=CID/SIM which unlocked the SIM card as well as loading any ROM which successfully worked after 6 tries.

[Q] No service in all WP7 roms

Hi!
I have problem with cellular connection.
I've tried few roms:
http://forum.xda-developers.com/showthread.php?t=1356833
http://forum.xda-developers.com/showthread.php?t=953078
I can't connect to gsm network.
Connection Setup says that my carrier doesn't exist in database (Play, Poland).
I did input my apn settings manually, but it didn't work eather.
On Android and WM6.5 everything is working fine. Few months ago I've had BackToTheFuture 7720 rom - without problems as well.
I'm running out of options...
Check if there is an update to Connection Setup, otherwise you could try flashing an original WM 6.5 Rom and see if the problem persists.
I've installed WM6.5 - everything is working fine.
Connection Setup from marketplace - same story as before.
Any ideas?
gregory90 said:
I've installed WM6.5 - everything is working fine.
Connection Setup from marketplace - same story as before.
Any ideas?
Click to expand...
Click to collapse
There is a new connections database cab for connection setup at yuki/xbmod tweaks thread, but Play is not in the database. Must be a niche carrier. Find out if Play is a reseller of a larger carrier.
Actually there is Play in that database. It seems like Connection Setup can't detect proper network (I'm using Turbosim to remove simlock - could this be causing problem?).
Is there a way to tell Connection Setup what settings should it use? Or set this manually?

Categories

Resources