Database Users

[Q] stock rom flash fail

Hello,
-sorry for my english I dont speak well but...
phone: I9505
I was testing cyanogemod 10.1.3 for a while but then I decided get back to stock rom, did full wipe and put this ROM I9505XXUBMF8 into Odin and start flashing but he said this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-then I couldnt go to system, recovery just to download mode so I flashed TWRP.
(I tried another stock rom, odin, PC but always same problem.)
-then i tried get back CM 10.1.3 via TWRP and it flashed and work without problem.
-then I tried flash omega rom via TWRP and it flashed without problem but booting is very slow and during the logo Samsung it takes about 10mins to boot into system and device is very hot.
-Everything about Kies and antivirus is off.
-Using just original USB cable.
-what says download mode:
ODIN MODE
PRODUCT NAME: gt-i9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: ENABLED
START [224, 1440]
SW REV, CHECK FAIL : FUSED : 2 , BINARY : 1
Any ideas how to resolve this?
Thank you

you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue

samersh72 said:
you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue
Click to expand...
Click to collapse
Thank you so much, I was looking for something all day but i didnt sure what Im really looking for

I bricked my SM-N9005 PLS HELP nothing works

Hi guys i bricked my galaxy note 3 - n9005 and nothing help i ve been trying flash it with odin ,in recovery mode by zip roms - by zip rooms it got stuck on samsung galaxy note 3 title and nothing happen , i want to get my phone back to the stock 4.4.2 rom pls help me nothing works in odin , i ve been trying with those pit files and nothing works :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)

Do you know what firmware you had before flashing this one?
Did you try another firmware?
Also, is reactivation lock off?

Does the firmware u flash need a pit?

to be honest with you guys im quite amateur in phone things i just wanted get my phone back to stock rom , before i had this rom N9005_JACKYAWAY_NB7.1 even now when i m trying to instal this one from sd card it gets stuck on the screen " SMASUNG GALASY NOTE 3 ". i m not sure this rom requires pit file or not i have been trying flash rom without this pit file and with this pit file - effect is the same :
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
Also, is reactivation lock off?
Click to expand...
Click to collapse
what does it mean ?
odin window :
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK (KK): OFF
KNOX KERNEL LOCK: OXO
KNOX WARRANTY VOID: 0X1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTIONl: ENABLE
UDC START

jacek88zs said:
to be honest with you guys im quite amateur in phone things i just wanted get my phone back to stock rom , before i had this rom N9005_JACKYAWAY_NB7.1 even now when i m trying to instal this one from sd card it gets stuck on the screen " SMASUNG GALASY NOTE 3 ". i m not sure this rom requires pit file or not i have been trying flash rom without this pit file and with this pit file - effect is the same :
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
what does it mean ?
odin window :
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK (KK): OFF
KNOX KERNEL LOCK: OXO
KNOX WARRANTY VOID: 0X1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTIONl: ENABLE
UDC START
Click to expand...
Click to collapse
ok.
try this. Go to : http://forum.xda-developers.com/showthread.php?t=2643109
download the latest czech NC2. This one no need pit file.
Just put it under PDA/AP, no need to tick repartition. Then after your phone connected, click start.
Your reactivation lock is OFF already, so no need to worry about this.

Ok thank you, i will try do as you said mate and i will let you know about results as soon as its possible ! hopefuly it will works because i started be worried about i spent lot of money and lost the phone hehe

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
STILL same problem with this czech rom ;///

Weird. Tat error is because the partition which need pit file.
Pardon me, if u don't mind, go to that thread again and download the firmware latest which need pit, download together with the pit, and flash again with repartition being ticked.
Sent from N7105, DN3 with AGNi kernel.

When Odin throws up that error, what does the download mode say?

It always appears when the odin is trying to flash the "system"

jacek88zs said:
It always appears when the odin is trying to flash the "system"
Click to expand...
Click to collapse
I meant, what error appears on the phone screen?

jacek88zs said:
Hi guys i bricked my galaxy note 3 - n9005 and nothing help i ve been trying flash it with odin ,in recovery mode by zip roms - by zip rooms it got stuck on samsung galaxy note 3 title and nothing happen , i want to get my phone back to the stock 4.4.2 rom pls help me nothing works in odin , i ve been trying with those pit files and nothing works :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Your phone is failing on flashing the hidden partition which usually contains the CSC info etc etc
Try downloading this rom or simply to go http://forum.xda-developers.com/showthread.php?t=2643572 or http://forum.xda-developers.com/showthread.php?t=2643109

And which one should i download now and try to flash ? before i have been trying to flash czech ... but still wasgot stuck on " system "
system.img.ext
FAIL! (Ext4)
Guys which one is with pit file and which one propably should get over this bug ?

jacek88zs said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
STILL same problem with this czech rom ;///
Click to expand...
Click to collapse
Also this isnt the stock C2 Rom if you check above it Says AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid. try downloading a stock C2 rom from Sammobile or a mirror but make sure that you reset your phone through recovery once u successfly flash the rom.

i just pastet wrong text from expired window of odin sorry ,the correct was with like screen shows without this " AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5 is valid. " i ve been trying to instal this czech one

jacek88zs said:
i just pastet wrong text from expired window of odin sorry ,the correct was with like screen shows without this " AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5 is valid. " i ve been trying to instal this czech one
Click to expand...
Click to collapse
Try Odin 3.09 . Sometimes older version is the issue.

guys i have been tryin with different versions of odin ...same problem on every of them . Can someone tell me step by step what to do just apart of what to do in odin ,i know this ,which rom ,and what css files or whatever ? pls tell me in details how to do this , i propably have some korean version of phone ;/ its 16 gb note 3

jacek88zs said:
guys i have been tryin with different versions of odin ...same problem on every of them . Can someone tell me step by step what to do just apart of what to do in odin ,i know this ,which rom ,and what css files or whatever ? pls tell me in details how to do this , i propably have some korean version of phone ;/ its 16 gb note 3
Click to expand...
Click to collapse
What model does it show ??? remove the battery and look .

Sm-n9005 rf8f10pd75j

@jacek88zs : If urs is 16gb, I think u need a pit file. Urs is hongkong version I guess.
Take a look at this thread :
http://forum.xda-developers.com/showthread.php?t=2631628
Sent from N7105, DN3 with AGNi kernel.

[Q] Newbie Helping : Note 3 soft bricked

Evening all ,
Hopefully someone here can help , Im somewhat of a newbie to this but was currently running Xnote Rom on 4.3 , I tried to upgrade to N9005XXUGNG1 following steps read on a well known website.
I received a "invalid ext4 image" error from odin and now stuck in a soft brick state where i can only access download mode. I am currently trying to get out of this back to a stock phone. I live in the UK and am on EE 4G.
Thanks in advance

UPDATE: Tried flashing N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 with the following results:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin

take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )

Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
Could you tell me which one , as the latest i can see is the GNG1 and i am not getting on well with that at present

xinfinityoO said:
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
Click to expand...
Click to collapse
Same problem..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005H3GGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just to let you whats on my download screen too :
the little android man
ODIN MODE
PRODUCT NAME - SM-N9005
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK(KK): OFF
KNOX KERNAL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2 T2 R2 A3 P1
WRITE PROTECTION: ENABLE
UDC START
ODIN : INVALID EXT4 IMAGE
Hope this helps ... And thanks for trying to help :cyclops:

Sometimes I get the android man and others I get a phone with a warning symbol and a pc saying " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".

Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
It worked , Thank you !!! :good:

I bricked my Note because i didnt flash the kernel :(

Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!

If you can access download mode, your phone is not bricked.
Simply download last firmware for your model from sammobile, and flash it with odin...

ok thanks, will do.
But how do I safely root the note 4 5.1.1? CF-Autoroot isnt compatible

Ok, I just finished download a stock rom for my phone (.tar.zip) but when I click start in Odin it always fails for some reason...<ID:0/003> Can't open the serial(COM) port.
Edit: tried a different port now it fails at:
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
What can I do?
Does upgrading via Kies will result in losing all data?

I'm working on this issue for hours now but I'm stuck
Using Odin it will fail at sboot.bin
And kies doesnt recognize my note 4

Here's the log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone: SW REV. CHECK FAIL, DEVICE 2, BINARY 1

Nixdax said:
Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!
Click to expand...
Click to collapse
Restore your backup in recovery

What is your exact model, G or F, what? You download the ROM from sammobile with your exact model no., and then flash.

It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........

Never heard about the H version before! Anyway, make sure you are flashing the correct Xposed, that is Wanam's, but Arter's, and read the installation instructions closely.

Nixdax said:
It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........
Click to expand...
Click to collapse
Please, search before flash.

H model is with Exynos processor.
http://www.sammobile.com/firmwares/database/SM-N910H/

[FIXED] J7 pro J730G/DS not booting

Texts in odin mode
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-J730G
CURRENT BINARY: Samsung OFFICIAL
SYSTEM STATUS: Custom
RMM STATE : Prenormal
FRP LOCK : OFF
OEM LOCK : OFF
Secure Download : Enabled
WARRANTY VOID: 1 (0XO30c)
AP SWREV: B:5 K:2 S:3
This is the phone of my friend, i had installed TWRP and was on A7 rom, It all started when the battery of the phone reached to 0% it switched off, and after charging and turning it on, It said only official binaries can be flashed (Not exact same but similar) and i tried to boot to twrp but it dosen't boot, so i treid to install twrp by odin mode, it failed saying same error. I treid to flash stock rom it shows error on odin
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in phone it shows KERNEL REV CHECK FAIL DEVICE:2, BINARY:0
and when i tried to install stock recovery it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and same error on phone.
Can anyone help me with that, i want to install stock rom and magisk.
Solved: I have tried different Odin and Odin v3.13 helped me out as other version doesn't support .lz4 compression format.

You can't downgrade if you flash stock firmware, try latest official rom

darkiiwi said:
You can't downgrade if you flash stock firmware, try latest official rom
Click to expand...
Click to collapse
Downloading, Hope i works

Update: I downloaded latest official firmware and it is stuck in shoot.bin.lz4
I have attached photo of it

CherryFarmer8 said:
Update: I downloaded latest official firmware and it is stuck in shoot.bin.lz4
I have attached photo of it
Click to expand...
Click to collapse
if you stuck at sboot.bin.lz4. It means you need to use higher version of odin or try to install higher version of samsung drivers, hopefully my solution can help

Tomjerryrocket said:
if you stuck at sboot.bin.lz4. It means you need to use higher version of odin or try to install higher version of samsung drivers, hopefully my solution can help
Click to expand...
Click to collapse
This issue is already fixed and i have also edited this post already, i wonder you didn't noticed.
Anyway thanks for your attention.

i cant fix my SM-J730G/DS
HOW DID YOU FIX IT CAN YOU TEACH ME? im hoping that you could help me.. keep on failing on flashing
---------- Post added at 10:01 AM ---------- Previous post was at 09:35 AM ----------
can i ask what firmware did you use, can i have the link?
when i power on, my phone says at the top of the screen " only official release binaries are allowed to be flashed" and then turning off again. Hoping for help.. God Bless...

Hi i have the same problem now, can you tell me how you fixed it? i have the exact same error as you. Thank you i hoping for your response