Texts in odin mode
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-J730G
CURRENT BINARY: Samsung OFFICIAL
SYSTEM STATUS: Custom
RMM STATE : Prenormal
FRP LOCK : OFF
OEM LOCK : OFF
Secure Download : Enabled
WARRANTY VOID: 1 (0XO30c)
AP SWREV: B:5 K:2 S:3
This is the phone of my friend, i had installed TWRP and was on A7 rom, It all started when the battery of the phone reached to 0% it switched off, and after charging and turning it on, It said only official binaries can be flashed (Not exact same but similar) and i tried to boot to twrp but it dosen't boot, so i treid to install twrp by odin mode, it failed saying same error. I treid to flash stock rom it shows error on odin
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in phone it shows KERNEL REV CHECK FAIL DEVICE:2, BINARY:0
and when i tried to install stock recovery it says
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and same error on phone.
Can anyone help me with that, i want to install stock rom and magisk.
Solved: I have tried different Odin and Odin v3.13 helped me out as other version doesn't support .lz4 compression format.
You can't downgrade if you flash stock firmware, try latest official rom
darkiiwi said:
You can't downgrade if you flash stock firmware, try latest official rom
Click to expand...
Click to collapse
Downloading, Hope i works
Update: I downloaded latest official firmware and it is stuck in shoot.bin.lz4
I have attached photo of it
CherryFarmer8 said:
Update: I downloaded latest official firmware and it is stuck in shoot.bin.lz4
I have attached photo of it
Click to expand...
Click to collapse
if you stuck at sboot.bin.lz4. It means you need to use higher version of odin or try to install higher version of samsung drivers, hopefully my solution can help
Tomjerryrocket said:
if you stuck at sboot.bin.lz4. It means you need to use higher version of odin or try to install higher version of samsung drivers, hopefully my solution can help
Click to expand...
Click to collapse
This issue is already fixed and i have also edited this post already, i wonder you didn't noticed.
Anyway thanks for your attention.
i cant fix my SM-J730G/DS
HOW DID YOU FIX IT CAN YOU TEACH ME? im hoping that you could help me.. keep on failing on flashing
---------- Post added at 10:01 AM ---------- Previous post was at 09:35 AM ----------
can i ask what firmware did you use, can i have the link?
when i power on, my phone says at the top of the screen " only official release binaries are allowed to be flashed" and then turning off again. Hoping for help.. God Bless...
Hi i have the same problem now, can you tell me how you fixed it? i have the exact same error as you. Thank you i hoping for your response
Related
Hey guys,
I had succesfully rooted my device. a few weeks ago. because i wanted cyanogenmod rom on it i tried to flash CWM recovery menu.
now my device gives the following message:
firmware upgrade encountered an issue. please select recovery mode in kies and try again.
Now i tried to reflash the stock rom with odin.
i downloaded the stock rom for my area (i guess)
i also downloaded a europe .pit file (someone said that on a tutorial how to remove soft brick)
Tried flashing
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I have an dutch galaxy s4. i have the provider T-mobile but the phone is not provider specified.
how can i fix this problem?
after trying with odin my downloading mode show's the following.
Odin mode
product name: GT-I9505
current binary: Custom
system status: Custom
knox kernel lock: 0x0
knox warranty void: 0x1
csb-config-lsb: 0x30
write protection: enable
emmc burst mode: enabled
start (224, 1440)
sw. rev. check fail : fused : 4 , binary : 3
what can i do to get my phone to start up normally, now i keep getting the firmware fault message.
Thanks in advance.
Edit: i cant open recovery mode. but i can open download mode.
VeryStealth said:
Hey guys,
I had succesfully rooted my device. a few weeks ago. because i wanted cyanogenmod rom on it i tried to flash CWM recovery menu.
now my device gives the following message:
firmware upgrade encountered an issue. please select recovery mode in kies and try again.
Now i tried to reflash the stock rom with odin.
i downloaded the stock rom for my area (i guess)
i also downloaded a europe .pit file (someone said that on a tutorial how to remove soft brick)
Tried flashing
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I have an dutch galaxy s4. i have the provider T-mobile but the phone is not provider specified.
how can i fix this problem?
after trying with odin my downloading mode show's the following.
Odin mode
product name: GT-I9505
current binary: Custom
system status: Custom
knox kernel lock: 0x0
knox warranty void: 0x1
csb-config-lsb: 0x30
write protection: enable
emmc burst mode: enabled
start (224, 1440)
sw. rev. check fail : fused : 4 , binary : 3
what can i do to get my phone to start up normally, now i keep getting the firmware fault message.
Thanks in advance.
Edit: i cant open recovery mode. but i can open download mode.
Click to expand...
Click to collapse
Try flashing a custom recovery through odin if u succeed u may have access to recovery nd if it doesnt work try flashing firmware without using pit file nd unchecking repartition option
Sent from my GT-I9500 using Tapatalk
---------- Post added at 10:56 PM ---------- Previous post was at 10:55 PM ----------
Which version is this which u r trying to flash via odin 4.3 or 4.4 2
Sent from my GT-I9500 using Tapatalk
aayushkhajuria2842 said:
Try flashing a custom recovery through odin if u succeed u may have access to recovery nd if it doesnt work try flashing firmware without using pit file nd unchecking repartition option
Sent from my GT-I9500 using Tapatalk
---------- Post added at 10:56 PM ---------- Previous post was at 10:55 PM ----------
Which version is this which u r trying to flash via odin 4.3 or 4.4 2
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
I thought it were a test version of 4.4.2 kitkat
though i now downloaded a netherlands version from this tread no idea wich version.
http://forum.xda-developers.com/showthread.php?t=2265477
and then the second one. also downloaded the .pit here. im gonna try it now.. youll hear in a few minutes
VeryStealth said:
I thought it were a test version of 4.4.2 kitkat
though i now downloaded a netherlands version from this tread no idea wich version.
http://forum.xda-developers.com/showthread.php?t=2265477
and then the second one. also downloaded the .pit here. im gonna try it now.. youll hear in a few minutes
Click to expand...
Click to collapse
I just want u 2 confirm it is 4.4.2 as u were trying to install cyanogenmod
Sent from my GT-I9500 using Tapatalk
aayushkhajuria2842 said:
I just want u 2 confirm it is 4.4.2 as u were trying to install cyanogenmod
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
leaked official version of 4.4.2
Why did i overlook that cyanogenmod recovery isnt compatible with 4.4.2 yet?
VeryStealth said:
leaked official version of 4.4.2
Why did i overlook that cyanogenmod recovery isnt compatible with 4.4.2 yet?
Click to expand...
Click to collapse
U can flash It if it is 4.4.2 ....nd I dont get your last line ???
Sent from my GT-I9500 using Tapatalk
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505PHNEMK5_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
following happend with the downloaded version of stock rom.
now trying with .pit file
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
so i guess its not the pitt file?
is anything damaged? or do i have a faulty rom combo?
so your saying basicly that i should just try to reflash cyanogenmod? do you have a link to the version i can use. just to make sure i use the right one and don't screw it up more..
thanks for your help already btw.
I downloaded the newest CM i can find? CM 11-20140327? also i have the newest gapps i can find.. though its 20130813.
but how do i flash the recovery menu?
NVM i gave you a lot of false information< i had the firmware fault while installing clockworkmod recovery menu< not cyanogen< both with C im sorry.. i needed a recovery menu to install cyanogen. thats why i had problems.. i tried flashing to get the recovery menu and that failed. that gave the issues.. not cyanogen
Need to go puppy training with my dog< back in an hour or so
VeryStealth said:
so your saying basicly that i should just try to reflash cyanogenmod? do you have a link to the version i can use. just to make sure i use the right one and don't screw it up more..
thanks for your help already btw.
I downloaded the newest CM i can find? CM 11-20140327? also i have the newest gapps i can find.. though its 20130813.
but how do i flash the recovery menu?
NVM i gave you a lot of false information< i had the firmware fault while installing clockworkmod recovery menu< not cyanogen< both with C im sorry.. i needed a recovery menu to install cyanogen. thats why i had problems.. i tried flashing to get the recovery menu and that failed. that gave the issues.. not cyanogen
Need to go puppy training with my dog< back in an hour or so
Click to expand...
Click to collapse
Problem solved.. downloaded a new stock rom.. and used a 2.0 usb. I only have 3.0 stock an i could flash without problems on 3.0.. 2.0 were a first time hit.
Thanks again
VeryStealth said:
Problem solved.. downloaded a new stock rom.. and used a 2.0 usb. I only have 3.0 stock an i could flash without problems on 3.0.. 2.0 were a first time hit.
Thanks again
Click to expand...
Click to collapse
Glad u sovlved ur prblm bt from nxt tym read before flashing any custom rom u may hav flashed some wrong one
Sent from my GT-I9500 using Tapatalk
Evening all ,
Hopefully someone here can help , Im somewhat of a newbie to this but was currently running Xnote Rom on 4.3 , I tried to upgrade to N9005XXUGNG1 following steps read on a well known website.
I received a "invalid ext4 image" error from odin and now stuck in a soft brick state where i can only access download mode. I am currently trying to get out of this back to a stock phone. I live in the UK and am on EE 4G.
Thanks in advance
UPDATE: Tried flashing N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 with the following results:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
Could you tell me which one , as the latest i can see is the GNG1 and i am not getting on well with that at present
xinfinityoO said:
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
Click to expand...
Click to collapse
Same problem..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005H3GGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just to let you whats on my download screen too :
the little android man
ODIN MODE
PRODUCT NAME - SM-N9005
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK(KK): OFF
KNOX KERNAL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2 T2 R2 A3 P1
WRITE PROTECTION: ENABLE
UDC START
ODIN : INVALID EXT4 IMAGE
Hope this helps ... And thanks for trying to help :cyclops:
Sometimes I get the android man and others I get a phone with a warning symbol and a pc saying " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
It worked , Thank you !!! :good:
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM
Thanks
Just fixed my baby s6
I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Reflash with stock 5.1.1 via odin.
ROMs for G920F:
http://www.sammobile.com/firmwares/database/SM-G920F/
Is there a 920T version of this?
Here you go:
http://www.sammobile.com/firmwares/database/SM-G920T/
G920I version?
Is there a 920I version as well?
Found it.
http://www.sammobile.com/firmwares/database/SM-G920I/
Criticalstriker said:
I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:
gamekill said:
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:
Click to expand...
Click to collapse
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade
andifds said:
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade
Click to expand...
Click to collapse
It's not possible to downgrade to 5.0.1 if your bootloader is on 5.1.1.
Downloading now. So like all the other Odin roms it passed but does it pass in download mode on the phone that then blocks the download ?
hello!
This works on any 5.1.1?
i mean can i download any 5.1.1. for 920F and it will be fixed or i have to use exactly the rom that is posted on OP?
Once in download mode flash the latest TWRP 2.8.7.1
[url said:
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570[/url]
After flashed you'll be able to boot into recovery and flash your custom ROM [/COLOR][/SIZE]
[/CENTER]
Click to expand...
Click to collapse
hi! can someone help me to flash this recovery.img ?
thanxx in advance.
Thank you so much for this topic, Rossyyy! :good::good::good::good::good::good::good:!!!!!!!!!
Edit; The only thing is that i still get a message (top left) in really small red letters every time i boot. For a few seconds and than boot proceeds by itself....
Rossyyy said:
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM
Click to expand...
Click to collapse
Hey, once I am facing the "system rev. check fail device: 2 binary 1 error", I don't think I can power off the phone completely. I can just reboot the phone into the download mode. If I try to reboot into recovery it will say "recovery is not seandroid enforcing"...
How do I power off the phone completely or how do I reboot into recovery?
aeroxy said:
How do I power off the phone completely or how do I reboot into recovery?
Click to expand...
Click to collapse
Volume up, home and power button.
richajax said:
Volume up, home and power button.
Click to expand...
Click to collapse
Oh yes, I have tried this. It will reboot and says "recovery is not seandroid enforcing"...
I think you will find your answer in one of these topics?
http://forum.xda-developers.com/search.php?searchid=379334690
Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE
brettule said:
Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE
Click to expand...
Click to collapse
Thanks for the link. I panicked when this happened, glad i was able to find this topic through google
---------- Post added at 02:46 PM ---------- Previous post was at 02:39 PM ----------
Okay, so it failed. Now what?
I'm starting to panic lol.
<OSM> Please wait..
<OSM> G920IDVU2COF8_G920IODD2COF8_G920IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
**EDIT**
for anyone else that may ever encounter this.. .make sure your "re-partition" option is unchecked in odin.
hi please help me
i have a big problem in my Note 4 Samsung SM-N910C
i was rooting my phone by twrp... after some time i wanna delete root so i enter mY twrp then suddenly
wipe all
1-cach
2- Dalvik cach
3- System
4- Data
5-Internal storgae
6-Micro Sdcard
so i delete the phone system so it is not work again stuck only on twrp and when i try to install N910CXXU1COH4_N910COXA1COH4_N910CXXU1COH4_HOME.zip from sdcard it failed
and when i tried to install from Odin 10 N910CXXU1COH4_N910COXA1COH4_N910CXXU1COH4_HOME.tar.MD5
give me failed
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so please how to fix it
My phone stuck only on Samsung note 4
Not sure if this will solve the issue, but read what I put here: http://forum.xda-developers.com/note-4/help/soft-bricked-note-4-n910f-t3306402
Thought I bricked my n910f, and all is good now!
But i do not have any stock frimaware on my phone i already delete the system
webby93
my odin log data
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910CXXU1COH4_N910COXA1COH4_N910CXXU1COH4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I didn't either, I completely wiped it.
What i think happened with me is that odin did put the stock firmware on even when it said it failed after like 5 mins. Then the allsamsungrecovery fixed the rest to let it boot up.
The only issue could be that your odin doesn't seem to have got quite as far as mine did. Can you only enter download mode and that's it?
i can enter download mod
but when i select the frimeware stock
The odin data appear log failed
and on the phone appeared : “SW REV CHECK FAIL DEVICE 2 BINARY 1”.
I'm really sorry, I don't think I'll be able to help any further. My knowledge is just from problem solving the few cases I've had to solve my self. Hopefully someone else can help you here.
Just Flash Lollipop 5.1.1 via odin which have coj5 or upgrade bootloader
you can't downgrade from coj5 bootloader you flash coh4 rom therefore you get error
http://forum.xda-developers.com/note-4/development/rom-note-4-mod-t3244665
flash this rom through odin complete stock and debloted firmware
download from here
https://docs.google.com/uc?id=0B8-hfA9ycQNoazRkV2xjNThWNWc&export=download
Best Regards,
Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!
If you can access download mode, your phone is not bricked.
Simply download last firmware for your model from sammobile, and flash it with odin...
ok thanks, will do.
But how do I safely root the note 4 5.1.1? CF-Autoroot isnt compatible
Ok, I just finished download a stock rom for my phone (.tar.zip) but when I click start in Odin it always fails for some reason...<ID:0/003> Can't open the serial(COM) port.
Edit: tried a different port now it fails at:
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
What can I do?
Does upgrading via Kies will result in losing all data?
I'm working on this issue for hours now but I'm stuck
Using Odin it will fail at sboot.bin
And kies doesnt recognize my note 4
Here's the log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone: SW REV. CHECK FAIL, DEVICE 2, BINARY 1
Nixdax said:
Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!
Click to expand...
Click to collapse
Restore your backup in recovery
What is your exact model, G or F, what? You download the ROM from sammobile with your exact model no., and then flash.
It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........
Never heard about the H version before! Anyway, make sure you are flashing the correct Xposed, that is Wanam's, but Arter's, and read the installation instructions closely.
Nixdax said:
It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........
Click to expand...
Click to collapse
Please, search before flash.
H model is with Exynos processor.
http://www.sammobile.com/firmwares/database/SM-N910H/