I moved from my G2 to the 5s. The G2 is rooted and has been sitting unused. I turned it on today to switch back to it for a while. It began to take on a verizon update. I just sat it down due to having to leave. Have not been following this thread lately to see what version the g2 is up to. Would it be getting kitkat by chance?
Also, it if take that update, my root will be lost, correct? I'm all stock just rooted.
It's bit kitkat. It's a small update that does nothing really
Sent from my VS980 4G using Tapatalk
Ok, so no kitkat yet. Thanks for the reply.
The Ota caused my phone to bootloop to recovery. I found a terminal command to allow it to boot back, but it keeps trying to install the Ota again how can I stop phone from attempting the update?
Freeze the "Software Update" program. After this you should no longer see the submenu in the "About Phone" section.
Related
Well, I've been messing with this since yesterday. I was once rooted via Kingo, but unrooted it a few weeks back.
SUA:
Tried the Verizon SUA on my Windows 8.1 desktop and it failed multiple times in even finding the phone. It never showed up in the window.
Moved to a naked Win 7 laptop and after installing all drivers, it ran VZW SUA and again, didn't list phone in the SUA window.
After multiple attempts at each, the OTA update showed up.
Downloaded OTA without trouble, but but after displaying the installation screen, a black box showed up and automatically rebooted to the existing 4.2.2. That error message was:
ERR: 0x1117008
While attempting to do OTA again, I checked the status button on the notification window and see its current upgrade status there. Specifically:
Status
Name: LG_VS980_12B_TO_24A
Status: Update Failed
Code: 402
Date: 19 Apr, 2014 EDT
Time: 07:25:53 AM
Somewhere in another window, I did see the phone suggesting that it was still rooted. I ran RootChecker and it says otherwise, but I'm assuming that my Root/Unroot process removed something that the Verizon software package is looking for as a key to being rooted.
I'd gladly skip the OTA and just do a full package upgrade via the VZW SUA if I could in fact get that to make the phone and software upgrade appear in the window itself. Hope this detailed info helps me and others who may be having similar troubles.
Any insight on where to go next?
Bill
Did you delete anything off your phone with titanium backup or something? Any uninstalling of system apps?
Sent from my VS980 4G using Tapatalk
I'm sure I pulled some bloatware at some point, but I wasn't too worried as all of it seemed to come back in after I did a hard reset.
Assume something like that is the problem, though. Thx.
Sent from my VS980 4G using xda app-developers app
BTW, if I did remove stiff it was probably with ROM Toolbox.
Sent from my VS980 4G using xda app-developers app
It's quite possible that could be the reason.
Sent from my VS980 4G using Tapatalk
Have you tried manually doing a factory reset using kdz or tot method? I tried just choosing factory reset under settings on my phone and the OTA still did not work. I got it to work using the TOT method listed as a sticky in the LG G2 section. Once I went back to 12b stock with this method the OTA worked just fine. Try it and if you have problems give a holler. I get your frustration as I went through it too haha.
Sent from my VS980 4G using Tapatalk 2
Are you running the Xposed framework? If so, uninstall from within the app and try again.
Not sure if your problem is the same as mine but when the OTA first appeared last week I had problems upgrading over wifi. I tried 3 times to install the OTA but all attempts failed (OTA downloaded successfully, phone reboots, and then the install fails with a similar error code). Switching off wifi and installing the OTA over 4G worked on the first try.
Mattecko99 said:
It's quite possible that could be the reason.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
That's what I'll try when I have time this weekend.
Sent from my VS980 4G using xda app-developers app
goodmojo said:
Not sure if your problem is the same as mine but when the OTA first appeared last week I had problems upgrading over wifi. I tried 3 times to install the OTA but all attempts failed (OTA downloaded successfully, phone reboots, and then the install fails with a similar error code). Switching off wifi and installing the OTA over 4G worked on the first try.
Click to expand...
Click to collapse
Oh, and I got the same exact error OTA. Koz/tot is next effort.
Sent from my VS980 4G using xda app-developers app
lg g2 verizon vs980 lollipop update fail
i hade a problem on my lg g2 vs980 verison ... it was a lollipop 5.0 android version and after i unbrick it i found it in 4.4.2 kitkat .. when did the update to a new version it shows that the update FAIL .. please help me :crying:
updates downloaded but......
the updates were downloaded automatically on my lg g2 .and popup messege said restart and install the updates.when i click on okay.my mobile restarted and on downloading mode on 50% of installing updates the installing just aborted and phone restart on old software without updates..any one plz help me with problem...
Hey, I have a LG D855, and I'm rooted on A6NL D855 V10G. My phone suggested to OTA update to V10I. Now I want to know if it's safe to do so. And if that's the case, what would happen to my root? I'd actually be glad to be rid of my root since I think it's lagging my device. So, what exactly would happen if I updated? Anybody with experience?
Would think although showing an ota when you download it it won't install as it will detect your root. In order to update you will have to return to unrooted state. A search will show a couple of threads instructing how to.
From what I understand, as long as you haven't made any changes within the system folder or installed a custom recovery, the OTA should install just fine. Worst case is if anything has been changed, it will tell you and it won't install. But yes, you will lose root once it is installed.
root and ota should be ok.
but be very careful if your g3 is bumped!! if you had installed bump! on your device, an ota update fails and the reboot always ended in the recovery. i tried almost erverything - no way out. i had no chance to reboot into the system!!
only flashing back to stock had fixed the problem (incl. loosing all personal data).
kd
Mendeltje1313 said:
Hey, I have a LG D855, and I'm rooted on A6NL D855 V10G. My phone suggested to OTA update to V10I. Now I want to know if it's safe to do so. And if that's the case, what would happen to my root? I'd actually be glad to be rid of my root since I think it's lagging my device. So, what exactly would happen if I updated? Anybody with experience?
Click to expand...
Click to collapse
When u are rooted, it will download the new update (ota), but it will give a error when it installs. You have to update via pc.
Sent from my LG-D855 using XDA Free mobile app
Just had this happen to me on LG G3 for AT&T
Was rooted, got prompted to install the update, I kept declining until it stopped asking.
Then my phone died, after plugging it in and restarting my phone, it instantly jumped into the update window with no other options.
It updated automatically, and it didn't stop or error because of my root. I'm on 4.2.2 now, most up-to-date version on AT&T.
To make it clear: I'm rooted with TowelRoot, NOT with Bump!
04/17/2015 Update to this posting; -24A OTA rooted 1st time using Stump after dozens of Brute Force fails on 23A-
Can anyone else confirm Stump Root working for 24A on their own devices?
Original Stump Thread; http://forum.xda-developers.com/lg-g3/orig-development/root-stump-root-lg-g3-sprint-verizon-t2850906
New OTA software update VK81024A just released this week. From what I've read and VZW's PDF, the only thing that was changed was 4G LTE coverage. In my experience with Verizon, they only release updates for this device to patch root methods and add bloat. This would have been my 3rd update to my GPad (had I accepted) without measurable positive impact. I personally cannot believe that they spent the time and money to fix LTE coverage that, in my experience, had no noticeable issue to begin with.
I would still be waiting for Lollipop on my VZ G3, if I didn't go ahead and root/ROM just last month. With the Lollipop ROM being available to the Korean G3 as early as November of LAST YEAR, my faith in Verizon getting us the updates we want and deserve (I purchased a flagship phone, and a popular tablet) is nonexistent.
Okay, I'm done ranting (for now) about the "Great Satan" that is VZW...the only carrier with good coverage here in my area of NY. Does anyone have any experience with this update? Anyone try rooting it (maybe Stumproot will start working again)? I am tempted to accept it if I could assist the community by doing so. Please tell me your thoughts.
VK810 OTA update from 23A to 24A keeps root
For both of my VK810 tablets on 23A:
Previously rooted 4.4.2 w/ Stump.
SuperSU marked w/ "survival mode". Given my history with the LG G3 keeping root w/o needing "survival mode", I doubt that setting "survival mode" was necessary. However, given the pain I went through to root one of my VK810 tablets right out of the box, I decided to keep it set.
The OTA update (still v4.4.2) to VK810-24A kept root.
The referenced Verizon web page ( http://www.vzw.com/lggpadsupport ) for update info shows very minor changes: http://www.verizonwireless.com/dam/support/pdf/system_update/benefits-lg-gpad-83-4-1-15.pdf
Just got mine this morning. Hadn't been using the tablet for a few days. Would not take OTA. Downloaded the file but kept kicking an error. Ended up hooking it up USB and using the upgrade assistant. Paranoia got the better of me and I "unrooted" first. Brute force stump (climbed to 6800 I think) did the trick just like before. Must say I was disappointed. I had not read what the "upgrade" consisted off but figured since they jumped from 23A to 24A it would be something substantial. I notice some minor cosmetic changes but that's about it. The 4gLTE "Update: or "Upgrade" isn't going to make much difference in my neck of the woods. 3G is about the best you can hope for here in this little town for the time being.
DeanGibson said:
For both of my VK810 tablets on 23A:
Previously rooted 4.4.2 w/ Stump.
SuperSU marked w/ "survival mode". Given my history with the LG G3 keeping root w/o needing "survival mode", I doubt that setting "survival mode" was necessary. However, given the pain I went through to root one of my VK810 tablets right out of the box, I decided to keep it set.
The OTA update (still v4.4.2) to VK810-24A kept root.
The referenced Verizon web page ( http://www.vzw.com/lggpadsupport ) for update info shows very minor changes: http://www.verizonwireless.com/dam/support/pdf/system_update/benefits-lg-gpad-83-4-1-15.pdf
Click to expand...
Click to collapse
Did the same thing as you, OTA installed and still rooted
This did not happen to me, I am using this same tablet and rooted with TWRP installed. When I tried to let the OTA install I got stuck in a boot loop and had to use some terminal commands inside of TWRP to fix the issue. I keep getting bothered with this upgrade notice and I don't know how to stop it. I am pretty sure if I try to let it update I will be stuck in a boot loop again. I don't want the damn update.
Anthony-m said:
This did not happen to me, I am using this same tablet and rooted with TWRP installed. When I tried to let the OTA install I got stuck in a boot loop and had to use some terminal commands inside of TWRP to fix the issue. I keep getting bothered with this upgrade notice and I don't know how to stop it. I am pretty sure if I try to let it update I will be stuck in a boot loop again. I don't want the damn update.
Click to expand...
Click to collapse
On every Android device, if you want to take an OTA, you have to either be 100% stock, or at least have stock recovery, kernel, bootloader, and other partitions, and only have done minor things with the system partition - not have debloated at all.
Sent from my VK810 4G
Anthony-m said:
This did not happen to me, I am using this same tablet and rooted with TWRP installed. When I tried to let the OTA install I got stuck in a boot loop and had to use some terminal commands inside of TWRP to fix the issue. I keep getting bothered with this upgrade notice and I don't know how to stop it. I am pretty sure if I try to let it update I will be stuck in a boot loop again. I don't want the damn update.
Click to expand...
Click to collapse
If the LG Mobile Support Tool factory restores the whole phone (recovery included) then this may be the best option till someone posts the KDZ with rooted 24A. This was my root method and it may work for you.
After searching through forums for weeks looking for viable root options (rollback and Purplerake or Towelroot, ADB scripting, and all others) and running Stump as often as I remembered (probably 30 times on 23A) I finally have it! I didn't see any up to date threads on rooting the VK810 and all the old threads had too many broken links to actually perform the steps.
Here's how it went down;
1.) Installed the latest LG USB drivers from LG's site ( http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00520120427 ).
2.) Download LG Mobile support tool ( https://docs.google.com/file/d/0B687...p2NlhhalU/edit ).
3.) Run the LG Mobile Support Tool program.
4.) Switched tablet USB mode to "Internet Connection / Ethernet" and after a few moments the LG Tool recognized my VK810.
5.) In LG Tool, click on "Options -> Upgrade Recovery" on the upright corner.
6.) It should start downloading stock firmware right away, if it says "Downloading" but there is no file size or progress, then you need to disable firewall.
7.) After the download, it will start "Upgrading".
8.) When the tablet rebooted I was on the latest VZW VK81024A which shocked me because I thought it was going to put the factory image (JB 4.2), but not to give up hope, I retried Stump...1st time rooted the thing!
9.) Followed Stump Root's directions (Reboot after app tells you to, Install SuperSU APK from market, Uninstall StumpRoot) and poof!
10.) Enjoy rooted 24A KitKat
It is very possible that 24A broke the fix VZW had for 23A (even though many people had success with 23A) and one need only take 24A OTA to Stumproot if they were not able to prior, but this is how my experience went down.
MANY thanks to @roirraW "edor" ehT, @jcase, & @jim380 for producing the threads and software that led to my rooting.
Hey everyone!
I've got an interesting predicament here. A little back story: a while back I installed TowelRoot, and then Xposed Framework. Everything was kosher until I got an OTA update (I believe the NG3 update) and it killed the root. No problem, I'm fine without root. But now that Lollipop has come out, I want to update but can't. My buddy applied the same root, but did not do Xposed. The difference between our phones after that OTA update: mine says "Custom" with an unlocked padlock at the Samsung boot screen; his does not.
I read in another thread that someone took their phone to Best Buy and the guys at the Samsung booth were able to fix the problem because they can pull updates and apply them via USB. So we went there yesterday and they had no problem getting Lollipop on my buddy's S5 Active. Mine, however, would not take the update. The Samsung S.M.A.R.T. tool they use on the PC was saying that "my device is running an unauthorized operating system", even though I have never flashed a custom ROM.
When I go into download mode, the Knox flag does not appear to be tripped. I've also performed a clean factory reset with a data wipe and that still didn't allow me to update. Whenever I try to update, it downloads the entire 4.4.4 update (which needs to be done first, before the 5.0 update) and it starts to install, failing at 25%, without hesitation, every single time.
I've attached a couple of screenshots that I hope will help. Any ideas will be greatly appreciated.
MGArcher007 said:
Hey everyone!
I've got an interesting predicament here. A little back story: a while back I installed TowelRoot, and then Xposed Framework. Everything was kosher until I got an OTA update (I believe the NG3 update) and it killed the root. No problem, I'm fine without root. But now that Lollipop has come out, I want to update but can't. My buddy applied the same root, but did not do Xposed. The difference between our phones after that OTA update: mine says "Custom" with an unlocked padlock at the Samsung boot screen; his does not.
I read in another thread that someone took their phone to Best Buy and the guys at the Samsung booth were able to fix the problem because they can pull updates and apply them via USB. So we went there yesterday and they had no problem getting Lollipop on my buddy's S5 Active. Mine, however, would not take the update. The Samsung S.M.A.R.T. tool they use on the PC was saying that "my device is running an unauthorized operating system", even though I have never flashed a custom ROM.
When I go into download mode, the Knox flag does not appear to be tripped. I've also performed a clean factory reset with a data wipe and that still didn't allow me to update. Whenever I try to update, it downloads the entire 4.4.4 update (which needs to be done first, before the 5.0 update) and it starts to install, failing at 25%, without hesitation, every single time.
I've attached a couple of screenshots that I hope will help. Any ideas will be greatly appreciated.
Click to expand...
Click to collapse
Have you resolved this issue, if so, would you mind sharing how you did it. I've been combing the net for a few days trying to discover what is going on and your issue appears to be exactly what I am experiencing. I've read about flashing back to my stock firmware using Odin but I cannot get into download mode, when I try and get there, the phone only says "recovery reboot" in blue small font on the top of the screen and reboots.
Thanks
Ladies and gents, I apologize for abandoning this thread. I forgot exactly how I got to get the phone to update, but if I recall correctly, it had to do with me putting the phone in download mode, downloading the original firmware and using ODIN to flash it. Afterward, the "unlocked" padlock symbol disappeared and the phone was able to get the OTA update from AT&T.
I have since moved from an LG G4 to a V20 and that is what I am currently playing with. I also have a Samsung Galaxy S6 Edge (which T-Mobile replaced my G4 with when the touch screen stopped responding). I was quite stoked to find out that there is a way to root it and (seemingly) unlock the bootloader, so I'll be toying with that this weekend to see what I can do. I'd love nothing more than to just wipe that Samsung-ified Android and install a vanilla Android or CM.
Good luck to anyone who is still trying to fix this issue. Again, my apologies. I'll dig through my archives and see if I can piece together what I did to get it going again. I still have the S5 Active. Best phone by far. It's a great backup phone for when the new stuff goes kaput.
Ok so my Verizon S5 is running on Kitkat using the NI2 firmware and rooted using the towelroot method - flashing the NCG, rooting and reflashing the NI2.
The phone keeps wanting to take the OTA and my son keeps hitting accept forcing me to reflash about once a month.
Haven't really researched this too much as she's happy with the phone, but I would like for the sake of my sanity and wifi tethering to update this phone to the most recent firmware possible and keep root. Also getting tired of the annoying update notifications.
Would like to keep a stock ROM as I have had some issues with custom ROMS.
I'm sure someone can point me in the direction of an already established thread.
Thanks.
You could disable the system update app and that will stop you from getting the update notification. I used titanium backup to freeze it
Sent from my SM-G900V using Tapatalk
I would recommend updating to marshmallow (PF4) if you have the 15xxxx eMMC and can unlock your bootloader.
I just upgraded from KitKat over the weekend and a bunch of my issues with my phone (lots of Force Closes) were resolved.
Follow this excellent guide: http://forum.xda-developers.com/ver...ewbies-guide-to-install-pb1-rom-root-t3481826
Either way, whether you choose to update or not, you should use Titanium Backup to freeze SDM 1.0 (according to guides. But showed up as "System Updates 1.0" (the one with the icon) on my phone with Marshmallow). That will block the OTA installer/notifier.
Royal2000H said:
I would recommend updating to marshmallow (PF4) if you have the 15xxxx eMMC and can unlock your bootloader.
I just upgraded from KitKat over the weekend and a bunch of my issues with my phone (lots of Force Closes) were resolved.
Follow this excellent guide:
Either way, whether you choose to update or not, you should use Titanium Backup to freeze SDM 1.0 (according to guides. But showed up as "System Updates 1.0" (the one with the icon) on my phone with Marshmallow). That will block the OTA installer/notifier.
Click to expand...
Click to collapse
Seconded. I followed this guide step by step and was able to update my phone as well.