Hey everyone!
I've got an interesting predicament here. A little back story: a while back I installed TowelRoot, and then Xposed Framework. Everything was kosher until I got an OTA update (I believe the NG3 update) and it killed the root. No problem, I'm fine without root. But now that Lollipop has come out, I want to update but can't. My buddy applied the same root, but did not do Xposed. The difference between our phones after that OTA update: mine says "Custom" with an unlocked padlock at the Samsung boot screen; his does not.
I read in another thread that someone took their phone to Best Buy and the guys at the Samsung booth were able to fix the problem because they can pull updates and apply them via USB. So we went there yesterday and they had no problem getting Lollipop on my buddy's S5 Active. Mine, however, would not take the update. The Samsung S.M.A.R.T. tool they use on the PC was saying that "my device is running an unauthorized operating system", even though I have never flashed a custom ROM.
When I go into download mode, the Knox flag does not appear to be tripped. I've also performed a clean factory reset with a data wipe and that still didn't allow me to update. Whenever I try to update, it downloads the entire 4.4.4 update (which needs to be done first, before the 5.0 update) and it starts to install, failing at 25%, without hesitation, every single time.
I've attached a couple of screenshots that I hope will help. Any ideas will be greatly appreciated.
MGArcher007 said:
Hey everyone!
I've got an interesting predicament here. A little back story: a while back I installed TowelRoot, and then Xposed Framework. Everything was kosher until I got an OTA update (I believe the NG3 update) and it killed the root. No problem, I'm fine without root. But now that Lollipop has come out, I want to update but can't. My buddy applied the same root, but did not do Xposed. The difference between our phones after that OTA update: mine says "Custom" with an unlocked padlock at the Samsung boot screen; his does not.
I read in another thread that someone took their phone to Best Buy and the guys at the Samsung booth were able to fix the problem because they can pull updates and apply them via USB. So we went there yesterday and they had no problem getting Lollipop on my buddy's S5 Active. Mine, however, would not take the update. The Samsung S.M.A.R.T. tool they use on the PC was saying that "my device is running an unauthorized operating system", even though I have never flashed a custom ROM.
When I go into download mode, the Knox flag does not appear to be tripped. I've also performed a clean factory reset with a data wipe and that still didn't allow me to update. Whenever I try to update, it downloads the entire 4.4.4 update (which needs to be done first, before the 5.0 update) and it starts to install, failing at 25%, without hesitation, every single time.
I've attached a couple of screenshots that I hope will help. Any ideas will be greatly appreciated.
Click to expand...
Click to collapse
Have you resolved this issue, if so, would you mind sharing how you did it. I've been combing the net for a few days trying to discover what is going on and your issue appears to be exactly what I am experiencing. I've read about flashing back to my stock firmware using Odin but I cannot get into download mode, when I try and get there, the phone only says "recovery reboot" in blue small font on the top of the screen and reboots.
Thanks
Ladies and gents, I apologize for abandoning this thread. I forgot exactly how I got to get the phone to update, but if I recall correctly, it had to do with me putting the phone in download mode, downloading the original firmware and using ODIN to flash it. Afterward, the "unlocked" padlock symbol disappeared and the phone was able to get the OTA update from AT&T.
I have since moved from an LG G4 to a V20 and that is what I am currently playing with. I also have a Samsung Galaxy S6 Edge (which T-Mobile replaced my G4 with when the touch screen stopped responding). I was quite stoked to find out that there is a way to root it and (seemingly) unlock the bootloader, so I'll be toying with that this weekend to see what I can do. I'd love nothing more than to just wipe that Samsung-ified Android and install a vanilla Android or CM.
Good luck to anyone who is still trying to fix this issue. Again, my apologies. I'll dig through my archives and see if I can piece together what I did to get it going again. I still have the S5 Active. Best phone by far. It's a great backup phone for when the new stuff goes kaput.
Related
A few weeks ago I rooted my Verizon Galaxy S4 using a simple method found on this forum. I didn't really do much with the phone other than uninstalling some preinstalled apps that I don't use, and I added a multi window manager to add some apps to the multi window function. I unrooted the device using the full cleanup for unroot in supersu before installing a verizon update about 2 weeks ago.
I am still unrooted, however when the device boots up it no longer shows the galaxy s4 screen. It now shows "Samsung" with an image of a lock that is unlocked and it reads "custom" underneath.
I was prompted to update about 2 days ago. it is the update to 4.3. I cannot install this update. When I try it almost immediately fails. Again, I am not rooted any more. I'm assuming that the few small changes I made are the reason.
My main question is how can I just get the phone back to stock. I just want it to be configured the way it was before I even rooted it. I'm at a point that I wish I hadn't done that. Is it possible to flash it back to factory 100% or am I pretty much screwed?
ytsejam6922 said:
A few weeks ago I rooted my Verizon Galaxy S4 using a simple method found on this forum. I didn't really do much with the phone other than uninstalling some preinstalled apps that I don't use, and I added a multi window manager to add some apps to the multi window function. I unrooted the device using the full cleanup for unroot in supersu before installing a verizon update about 2 weeks ago.
I am still unrooted, however when the device boots up it no longer shows the galaxy s4 screen. It now shows "Samsung" with an image of a lock that is unlocked and it reads "custom" underneath.
I was prompted to update about 2 days ago. it is the update to 4.3. I cannot install this update. When I try it almost immediately fails. Again, I am not rooted any more. I'm assuming that the few small changes I made are the reason.
My main question is how can I just get the phone back to stock. I just want it to be configured the way it was before I even rooted it. I'm at a point that I wish I hadn't done that. Is it possible to flash it back to factory 100% or am I pretty much screwed?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2265477
Hey Guys, I'm brand new to these forums, and to this whole community so bare with me.
Basically I bought my T-Mobile Samsung Galaxy S5 phone around the time it came out, and I also had installed root on it via towelroot when Towel Root was first released. I did not update the phone at all for a long period of time and everything was working fine, until one day I was browsing under settings and accidentally tapped the "Software Update" button, then T-mobile auto-pushed an update onto my phone.
This update has caused the root on my phone to not work at all (Deemed useless) So I clicked SU and only a black screen popped up when I tried to open the app, so I uninstalled it, reinstalled it then got a message saying "There is no SU binary installed, and SuperSU Cannot install it. If you just upgraded to Android 4.3 you need to manually re-root your device" So I tried to re-root via towelroot method again. It seems the T-mobile update made my phone "Unsupported/Uncompatible" with TowelRoot's obsolete techniques, so now I'm in dire need of help.
My phone tried to push another t-mobile update (This time to upgrade to Lollipop) but it failed after attempting to install it after a reboot. So not only will my phone not update to Lollipop, but I'm not even rooted anymore and am unsure on how to get back rooted, or what to do next since I used rooting as a primary source to store apps on my SD Card. Kind of like i'm stuck in one spot? (Can't update your phone/can't root it the old method)
I'm brand new guys, Please can you break down to me what I should do, in order to obtain root again, and possibly be able to upgrade to Lollipop As well as prevent further pushed T-mobile updates? Here's some info if you need it
S5 Model Number: SM-G900T
Android Version:4.4.2
Kernel Version:3.4.0-262.. etc. (Tell me if you need the full kernel details)
Any help would be greatly appreciated! Thank YOU!
Flash this with ODIN
http://download.chainfire.eu/407/CF-Root1/CF-Auto-Root-kltetmo-kltetmo-smg900t.zip
(Will trip KNOX and void warranty)
Or flash a pre-June 2014 KK Kernel, root with Towelroot again, then flash back your current Kernel
Is this the only solution? And also is it the right one? o.o
Can anyone else please give me some feedback on the situation? I want to make sure I do this right, please just a little helps.
Bump
bump
*Detection* said:
Or flash a pre-June 2014 KK Kernel, root with Towelroot again, then flash back your current Kernel
Click to expand...
Click to collapse
Hey I did exactly what you said and it worked I got root back, but I was wondering how to flash back to my current kernel and keep Root?
Hello all,
I recently discovered that my S5 was only running KitKat despite Marshmallow having been released for it. I checked for OTA updates and it found nothing, so I decided to flash a custom 6.0 ROM onto it (and for some reason I ended up deciding not to make a backup of the phone beforehand, the ultimate mistake).
The problem became that it didn't recognize Tracfone for my service provider and wouldn't connect to the mobile network. I then downgraded it to a 5.0 ROM, and it no longer even recognized the SIM card, saying there was none.
So I tried to flash the original stock ROM a few times, but every time either got errors from ODIN, the phone itself, or the TWRP bootloader.
Long story short, I seem to have screwed up multiple times trying to install a ROM to get around KitKat and now my phone appears to be softbricked. I can get into the TWRP menu and the "download" mode, but when trying to start the phone, it sits on the "Samsung Galaxy S5" screen with the "Set Warrenty Bit : kernel" text at the top left.
I'm just wondering if there's a way to fix it at this point, or if I've completely trashed the phone.
If anybody has suggestions or experience with this, all help is welcome!
Thanks!
MevNav said:
Hello all,
I recently discovered that my S5 was only running KitKat despite Marshmallow having been released for it. I checked for OTA updates and it found nothing, so I decided to flash a custom 6.0 ROM onto it (and for some reason I ended up deciding not to make a backup of the phone beforehand, the ultimate mistake).
The problem became that it didn't recognize Tracfone for my service provider and wouldn't connect to the mobile network. I then downgraded it to a 5.0 ROM, and it no longer even recognized the SIM card, saying there was none.
So I tried to flash the original stock ROM a few times, but every time either got errors from ODIN, the phone itself, or the TWRP bootloader.
Long story short, I seem to have screwed up multiple times trying to install a ROM to get around KitKat and now my phone appears to be softbricked. I can get into the TWRP menu and the "download" mode, but when trying to start the phone, it sits on the "Samsung Galaxy S5" screen with the "Set Warrenty Bit : kernel" text at the top left.
I'm just wondering if there's a way to fix it at this point, or if I've completely trashed the phone.
If anybody has suggestions or experience with this, all help is welcome!
Thanks!
Click to expand...
Click to collapse
Are you sure you have the stock firmware for the 902l and not the 903vl? The reason you didn't get the update for 6.0 is you have the 902l model. If you had the 903vl model you'd have 6.0. Straight talk never released it for the 902l model. No idea why being both models are very similar. Im not sure but if you make it back to stock on kitkat. I think you can use safestrap from the Verizon s5 to use some custom roms that run kitkat. If your bootloader is in fact unlocked and you can install a custom recovery other then safestrap. I believe you can install pretty much anything but I'm pretty sure straight talk ships the phones with the Toshiba chip so the bootloader isn't unlockable
So I've been rooting me phone for a while and have managed to never f*** up, till now, and I sincerely hope you guys can help me.
After rooting my S7 a while back, I just recently noticed SuperUser telling me that I didn't have root anymore, so I decided to follow these instructions to re-root my phone:
https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
I successfully followed all the steps to get root, but when I opened Flashfire it told me I could install a new update while maintaining root, so since my android is at 6.0.1, I did that and it bricked my phone.
On boot it says "Startup Failed - Use the Verizon Software Repair Assistant . . . " and on top it also says "Custom binary blocked by SECURE BOOT." I have tried going into recovery mode and deleting the system cache, but that doesn't do it. So is there any way to get the phone to properly boot while not deleting my data? I was rooting my phone precisely so I could use Titanium Backup again, so I don't have any backups stored anywhere. I have heard that flashing a recovery image with Odin can work, but would that delete my files? Someone please lend me your expertise.
My phone is a Verizon S7.
Fixed
I am surprised that no one responded to me, but what's important is that, miraculously, I managed to un-brick the phone myself without losing any data! What I did was, as my last hope (since Odin wasn't able to flash the stock image, a la the traditional soft-brick fix), decide to follow the on-screen instructions my phone was giving me and to download and run something called the "Verizon Software Repair Assistant," which can be found in the top google results after searching for the quoted name (xda doesn't let me post the link).
After putting my phone into download mode, I plugged it in, ran the software and let it work overnight. Checking on it in the morning, I found my phone, not only completely functional and working, but updated to Android 7.0 (it was 6.0.1 previously before the failed Flashfire OTA update) and still holding all of my data intact.
So, the interesting thing that I learned is that flashing to stock via Odin to fix a soft-bricked phone should not be the default resolution for potentially most people, as the carrier's default (in my case, Verizon's) repair utility managed to completely fix my phone without any side effects or data loss.
Is there anyone who could chime in on why the Repair Utility did not wipe my phone's memory, even though it warned it would?
**Note**
Verizon links to the Windows version of the repair assistant on their site, but to get the Mac version (which I used), the only way you can get it is by changing the end of the url they mention within the thread from "Win" to "Mac."
Pleased you managed to fix it, and thanks for posting the method for others
As for replies, if you stick around XDA you'll see replies can take days sometimes, patience is the key here
*Detection* said:
Pleased you managed to fix it, and thanks for posting the method for others
As for replies, if you stick around XDA you'll see replies can take days sometimes, patience is the key here
Click to expand...
Click to collapse
I guess I am not acquainted with this forum enough then, thanks!
Most likely the cause of the fault would be updating via FlashFire and keeping root. When the update was flashed, it most likely flashed the stock kernel and patched it for root, which is not a compatible root for our devices. Flashing the root kernel with Odin probably would have made the phone boot normally.
I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
bkenobi69 said:
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Try to dial *#0808# in the stock phone application.
You should see a menu with several options.
Select "MTP+ADB" under USB settings and press "OK".
Then you'll be able to connect your phone via MTP or ADB to your PC.
If there's no menu, then (assuming you're rooted) open a good file browser (ES, Root Explorer or something) and open the file /efs/carrier/HiddenMenu (it's a simple text file) and replace OFF with ON there.
Save the changes and reboot the phone.
Now the menu should be operational.
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
bkenobi69 said:
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
Click to expand...
Click to collapse
Currently root is impossible for MM on G900V CID11.
Impossible means you cannot gain it now, most likely it's forever.
There's no internet site which can help.
You must choose: root on LP or unrooted MM.
You must decide if you want a stock ROM or something (TW-based) else too.
It's a good idea to flash and use a stock firmware for the time while you're thinking.
Interesting... I guess I must have been reading things wrong because I thought I could go to MM with root. I'll try going to Lollipop then but first I'm going to just flash back to JB 4.4.4.
I downloaded 4.4.4 from Samsung and was going to write it with Odin, but it says FAIL when I try to flash. I suspect I just tripped Knox...
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I'll look around to find a guide, but if you have a suggestion, I'd certainly listen!
bkenobi69 said:
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
Click to expand...
Click to collapse
This means that you've upgraded your phone's firmware while experimenting.
Now you cannot directly flash 4.4.4 with Odin, you're limited to 5.0 (BOK3) and above.
Ok. I'll read the guides on the head of this list and see if I can find the right information.
FWIW, I was following the same how-to that most of the stickies point to and say is safe. I wonder how I got to a position that I'm in now when I did the same as recommended. Painiac's thread points to the same thing I did:
https://forum.xda-developers.com/ve...al/guide-painiacs-essential-guide-to-t3319848
I think I may have tried to flash a MM stock rom though when it got into a boot loop. I suspect that would be the issue.
Bootloop is not a problem in this case.
Just reboot to the recovery and perform a factory reset from there.
The phone will boot but the first boot will take 10-15 min.
bkenobi69 said:
I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Marshmallow can not be rooted on CID 11 devices. The Samsung drivers are found here: https://www.samsung.com/us/support/owners/product/galaxy-s5-verizon You can follow the 5.0 root guide here: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529 to downgrade to 5.0. If you want to downgrade past that to a version lower than 5.0, you will still have to follow that guide then follow the instructions here (I recommend you to follow the root guide for 5.0 above then skip steps 1 and 2 on this page): https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858 . You can find stock firmwares here: https://forum.xda-developers.com/showthread.php?t=2784880 (stock firmware, kernel, and modem files) and if you get bootlooped or bricked, just reflash the combination file from the root guide. If you want to root 4.4.4, follow the downgrade method using all of the NK2 files but the flash the NGC kernel, run through the setup, then use towelroot and flash the NK2 kernel after that. If you ever get stuck on the red Verizon screen, just pop the battery out and reboot.
That's about all anyone can do and a run down of everything.
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
bkenobi69 said:
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
Click to expand...
Click to collapse
Understandable, I can't believe it is 2018 and we still haven't invented a way to compress 1.7GB into 1.7MB archives to make life easy on low connections. How is battery life on 4.4.4 and which update of 4.4.4 are you on? I've been having an issue with my phone dropping a percent every 2 minutes on 5.0/6.0. It would be nice find a version to root along with excellent battery life.
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Ok, I tethered to my wife's phone and am burning her data (shhhh, don't tell her).
I grabbed all of the OC4 files, the PB1 rom, and lolliroot. I think I have everything I need so long as OC4 is a good place to end up.
bkenobi69 said:
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Click to expand...
Click to collapse
Here are some files (that I been hunting for about an hour for). Just gonna reference this for future use and anyone who comes across this thread. http://rootjunkysdl.com/files/?dir=Galaxy S5
Nice find!
I have the phone up and running on stock PB1 currently. I'm going to let it sit to see what the battery is like prior to rooting. While I haven't gotten it hooked back up to my account yet nor do I have it rooted, I feel pretty confident now that I'm on the right track. Thanks!
Just to finish out this topic, I have not successfully completed attaining root on 5.0. I flashed PB1 to the phone and then followed this guide for installing KingRoot:
https://androidforums.com/threads/root-question.1120150/
I got the lolliroot files from here:
https://www.androidfilehost.com/?fid=312968873555011514
Thanks to all who offered help!
Qyuck question... I've got my phone working well bow, but there's one issue with apps I'm not sure how to address. I want to use Verizon Visual Voicemail but I can't find it on the Play store. I disabled updates so I wouldn't get the marshmallow update and break root. but, with updates turned off, VVM won't get pushed. Any suggestions?