Database Users

SM-G870A Failing to Update Past 4.4.2

Hey everyone!
I've got an interesting predicament here. A little back story: a while back I installed TowelRoot, and then Xposed Framework. Everything was kosher until I got an OTA update (I believe the NG3 update) and it killed the root. No problem, I'm fine without root. But now that Lollipop has come out, I want to update but can't. My buddy applied the same root, but did not do Xposed. The difference between our phones after that OTA update: mine says "Custom" with an unlocked padlock at the Samsung boot screen; his does not.
I read in another thread that someone took their phone to Best Buy and the guys at the Samsung booth were able to fix the problem because they can pull updates and apply them via USB. So we went there yesterday and they had no problem getting Lollipop on my buddy's S5 Active. Mine, however, would not take the update. The Samsung S.M.A.R.T. tool they use on the PC was saying that "my device is running an unauthorized operating system", even though I have never flashed a custom ROM.
When I go into download mode, the Knox flag does not appear to be tripped. I've also performed a clean factory reset with a data wipe and that still didn't allow me to update. Whenever I try to update, it downloads the entire 4.4.4 update (which needs to be done first, before the 5.0 update) and it starts to install, failing at 25%, without hesitation, every single time.
I've attached a couple of screenshots that I hope will help. Any ideas will be greatly appreciated.

MGArcher007 said:
Hey everyone!
I've got an interesting predicament here. A little back story: a while back I installed TowelRoot, and then Xposed Framework. Everything was kosher until I got an OTA update (I believe the NG3 update) and it killed the root. No problem, I'm fine without root. But now that Lollipop has come out, I want to update but can't. My buddy applied the same root, but did not do Xposed. The difference between our phones after that OTA update: mine says "Custom" with an unlocked padlock at the Samsung boot screen; his does not.
I read in another thread that someone took their phone to Best Buy and the guys at the Samsung booth were able to fix the problem because they can pull updates and apply them via USB. So we went there yesterday and they had no problem getting Lollipop on my buddy's S5 Active. Mine, however, would not take the update. The Samsung S.M.A.R.T. tool they use on the PC was saying that "my device is running an unauthorized operating system", even though I have never flashed a custom ROM.
When I go into download mode, the Knox flag does not appear to be tripped. I've also performed a clean factory reset with a data wipe and that still didn't allow me to update. Whenever I try to update, it downloads the entire 4.4.4 update (which needs to be done first, before the 5.0 update) and it starts to install, failing at 25%, without hesitation, every single time.
I've attached a couple of screenshots that I hope will help. Any ideas will be greatly appreciated.
Click to expand...
Click to collapse
Have you resolved this issue, if so, would you mind sharing how you did it. I've been combing the net for a few days trying to discover what is going on and your issue appears to be exactly what I am experiencing. I've read about flashing back to my stock firmware using Odin but I cannot get into download mode, when I try and get there, the phone only says "recovery reboot" in blue small font on the top of the screen and reboots.
Thanks

Ladies and gents, I apologize for abandoning this thread. I forgot exactly how I got to get the phone to update, but if I recall correctly, it had to do with me putting the phone in download mode, downloading the original firmware and using ODIN to flash it. Afterward, the "unlocked" padlock symbol disappeared and the phone was able to get the OTA update from AT&T.
I have since moved from an LG G4 to a V20 and that is what I am currently playing with. I also have a Samsung Galaxy S6 Edge (which T-Mobile replaced my G4 with when the touch screen stopped responding). I was quite stoked to find out that there is a way to root it and (seemingly) unlock the bootloader, so I'll be toying with that this weekend to see what I can do. I'd love nothing more than to just wipe that Samsung-ified Android and install a vanilla Android or CM.
Good luck to anyone who is still trying to fix this issue. Again, my apologies. I'll dig through my archives and see if I can piece together what I did to get it going again. I still have the S5 Active. Best phone by far. It's a great backup phone for when the new stuff goes kaput.

[Q] Quick Question If Someone Has a Moment, Please

I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
I'm afraid I'm not familiar with Samsung devices, and because I purchased this from ebay, I don't know how to tell the exact state that the former user put it in (I expected they would return it to stock prior to selling).
It's currently a T-Mobile branded, SM-N900T, on 4.4.2, build is KOT49H, security software MDF v1.0 release 2. Kernel is 3.4.0-660648.
It is supposedly unlocked for carriers, though I have not attempted a SIM card use yet, until I can tell that what I have is a valid device and the IMEI is checked out.
Any thoughts on how to validate the IMEI, and sort out how to get my new phone up to date would be appreciated. As I stated, I expected the vendor would have returned it to stock, but that is clearly not the case, so I don't want to accidentally boot loop it by doing something I shouldn't. I have not owned a Samsung before, so I want to be careful on how it differs from my Nexus 7, Amaze 4g, and Droid X, as they're all obviously very different in the OS area.
Thank you for the help1

Download tbe stock 4.4.2 rom and use odin to install. Then you will get the OTA updates.
Sent from my SM-N900P using Tapatalk

There is no stock 5.1.1 for note 3, only cm12.1/ aosp. Latest is 5.0 and you can use odin to flash. Maybe it's rooted that's why you can't update.

bladebarrier said:
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
...
Thank you for the help1
Click to expand...
Click to collapse
Some apps to install from Play Store...
Phone INFO Samsung - this will tell you all about your phone and the firmware etc.
Root Checker Basic - tells you if you are rooted or not.
SuperSU - this is so valuable you should buy the Pro licence. Chainfire does some great work for our phones.
TWRP - I have the zip version on my extSDCard and an Odin version on PC in case I have to rebuild from a Stock firmware. CWN works OK but most ROM builds seem to be for TWRP I think and a backup from one will not work on the other.
I don't know your previous phone so you probably need Odin v3.09 - this sits on PC and lets you flash firmware to the phone. (connected by USB)
For which you need Samsung USB drivers so the PC will recognise the phone. Install on PC before connecting phone.
Then do some browsing and find the processes to root your phone and install the ROM you want. If you just want Stock and access to all your phone, you can root it after flashing the original v5.0 download (from Sammobile or similar site - note on Sammobile you need a free account to DL) and then install Custom recovery (if wanted - it WILL trip the Knox flag but that may not matter given it's 2nd hand and might already be tripped anyway)
Read, make SURE you understand what is being said BEFORE you do anything - ask if you don't.
Good luck...

N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help

Thank you all for the info, especially the detailed info from Journyman16. I checked, and it is flagged as custom, which is fine, so I'm going to go ahead and try to return to mostly stock, update it, and root it.

Ok, everything went well. I had to do two attempts at rooting, but I think it's just one of those things where sometimes it doesn't restart into the process every time.
All seems good. I'm on 5.0, rooted, busyboxed, and smooth sailing.
Thank you all, again, for the tips. The Note 3 is running very well. Thank you to all of the devs that have made this process so refined. I've donated to you before, and did so again today. It's outstanding to have such well versed coders, on XDA, helping out the community.

mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
You have never learned not to ask in others posts? What does your problem has to do with this topic at all?
When you need help. Just click on Q&A then Create a new thread. How hard is it?

Question about 6.0.1 Update for Verizon S5 that is on Straight Talk

Hi all,
A couple quick questions here. I've done some reading up, but most of the information is more in depth than I need at the moment so I'm looking for some quick answers.
My SO has a Verizon S5, that has a locked bootloader, is not rooted, and is still on 5.0.
She swapped carriers a while back, so is no longer on the Verizon network. The IMEI is clean, and her Verizon account is fully paid, and everything on the phone works fine, aside from it being stuck on 5.0.
It will not update via the automated system, because I assume it's trying to reach out to straight talk for the update and gets a response that it's on the newest version.
I downloaded the Verizon OTA update file (approximately 1 gb) for 6.0.1. It's named update.zip to allow for automated updating.
Here are my questions:
1. Would it be ok to just slap the update file on her phone and let it auto-update using the built in software?
2. Are there any major downsides to updating to marshmallow, considering it's an official release on the correct version of that phone?
3. Will root be needed prior (I'm assuming not) for using the OTA update file?
4. Will her information stay intact; email accounts, contacts, apps, samsung account, etc?
5. While root would be nice for locking down some of the bloatware after, it isn't a deal breaker, simplicity is the key here as she is not an advanced user, but would updating via the OTA file remove all possibilities of rooting the device after (it seems to be the impression I get, as her bootloader is locked)?
Thank you very much for your assistance!

Hi bladebarrier, I actually just did the same thing a few weeks ago with a used S5 from Verizon going to Straight Talk.
1. Would it be ok to just slap the update file on her phone and let it auto-update using the built in software?
I'm unsure if that would work, someone else may be able to answer as to that method, however I used the Odin tool v3.11.1, downloaded the PD1 image from here. There are some good video tutorials on YouTube and on writeups on this forum as well regarding how to flash the Marshmallow update using Odin.
2. Are there any major downsides to updating to marshmallow, considering it's an official release on the correct version of that phone?
No downsides that I've noticed and seems to have slightly better battery life.
3. Will root be needed prior (I'm assuming not) for using the OTA update file?
You do not need root to flash it if using the Odin tool.
4. Will her information stay intact; email accounts, contacts, apps, samsung account, etc?
Yes, but it's always a good idea to make a backup of everything.
5. While root would be nice for locking down some of the bloatware after, it isn't a deal breaker, simplicity is the key here as she is not an advanced user, but would updating via the OTA file remove all possibilities of rooting the device after (it seems to be the impression I get, as her bootloader is locked)?
The only thing that the locked boot loader affects for now is the ability to flash custom ROMs. I was able to downgrade to 5.0 Lollipop which you can still root, even after upgrading, however I decided to just go back to Marshmallow and wait for an exploit to be found, if one ever is.

jesimpki89 said:
Hi bladebarrier, I actually just did the same thing a few weeks ago with a used S5 from Verizon going to Straight Talk.
1. Would it be ok to just slap the update file on her phone and let it auto-update using the built in software?
I'm unsure if that would work, someone else may be able to answer as to that method, however I used the Odin tool v3.11.1, downloaded the PD1 image from here. There are some good video tutorials on YouTube and on writeups on this forum as well regarding how to flash the Marshmallow update using Odin.
2. Are there any major downsides to updating to marshmallow, considering it's an official release on the correct version of that phone?
No downsides that I've noticed and seems to have slightly better battery life.
3. Will root be needed prior (I'm assuming not) for using the OTA update file?
You do not need root to flash it if using the Odin tool.
4. Will her information stay intact; email accounts, contacts, apps, samsung account, etc?
Yes, but it's always a good idea to make a backup of everything.
5. While root would be nice for locking down some of the bloatware after, it isn't a deal breaker, simplicity is the key here as she is not an advanced user, but would updating via the OTA file remove all possibilities of rooting the device after (it seems to be the impression I get, as her bootloader is locked)?
The only thing that the locked boot loader affects for now is the ability to flash custom ROMs. I was able to downgrade to 5.0 Lollipop which you can still root, even after upgrading, however I decided to just go back to Marshmallow and wait for an exploit to be found, if one ever is.
Click to expand...
Click to collapse
Thank you very much for your thorough response. It sounds like it will be a nice smooth flash, and I will use the full Odin version instead of the OTA file, to ensure it goes through comfortably.

Odin looked like it wanted to wipe the apps, so I ended up using the stock recovery/installer that's built in, and placing the OTA update file on the external SD card.
That worked like a charm. It took a bit, as expected, but all of the apps and info were ok after.
The only thing I can't sort out is why I can't find an option for the "Themes" setting in touch wiz. Any suggestions? I realize I could have her go to a third party launcher, like nova, but I have all of the theme options on my note 3, that's ported to MM note 5, and the theme option is still right there in the settings list, per normal. Maybe I'm just not seeing it, but I couldn't find an option on her S5 during 5.0, or now on 6.0.1. Is that something they never updated for the older phones?

(Soft?)-Bricked My S7 with a Flashfire Update, Need Help to Fix It?

So I've been rooting me phone for a while and have managed to never f*** up, till now, and I sincerely hope you guys can help me.
After rooting my S7 a while back, I just recently noticed SuperUser telling me that I didn't have root anymore, so I decided to follow these instructions to re-root my phone:
https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
I successfully followed all the steps to get root, but when I opened Flashfire it told me I could install a new update while maintaining root, so since my android is at 6.0.1, I did that and it bricked my phone.
On boot it says "Startup Failed - Use the Verizon Software Repair Assistant . . . " and on top it also says "Custom binary blocked by SECURE BOOT." I have tried going into recovery mode and deleting the system cache, but that doesn't do it. So is there any way to get the phone to properly boot while not deleting my data? I was rooting my phone precisely so I could use Titanium Backup again, so I don't have any backups stored anywhere. I have heard that flashing a recovery image with Odin can work, but would that delete my files? Someone please lend me your expertise.
My phone is a Verizon S7.

Fixed
I am surprised that no one responded to me, but what's important is that, miraculously, I managed to un-brick the phone myself without losing any data! What I did was, as my last hope (since Odin wasn't able to flash the stock image, a la the traditional soft-brick fix), decide to follow the on-screen instructions my phone was giving me and to download and run something called the "Verizon Software Repair Assistant," which can be found in the top google results after searching for the quoted name (xda doesn't let me post the link).
After putting my phone into download mode, I plugged it in, ran the software and let it work overnight. Checking on it in the morning, I found my phone, not only completely functional and working, but updated to Android 7.0 (it was 6.0.1 previously before the failed Flashfire OTA update) and still holding all of my data intact.
So, the interesting thing that I learned is that flashing to stock via Odin to fix a soft-bricked phone should not be the default resolution for potentially most people, as the carrier's default (in my case, Verizon's) repair utility managed to completely fix my phone without any side effects or data loss.
Is there anyone who could chime in on why the Repair Utility did not wipe my phone's memory, even though it warned it would?
**Note**
Verizon links to the Windows version of the repair assistant on their site, but to get the Mac version (which I used), the only way you can get it is by changing the end of the url they mention within the thread from "Win" to "Mac."

Pleased you managed to fix it, and thanks for posting the method for others
As for replies, if you stick around XDA you'll see replies can take days sometimes, patience is the key here

*Detection* said:
Pleased you managed to fix it, and thanks for posting the method for others
As for replies, if you stick around XDA you'll see replies can take days sometimes, patience is the key here
Click to expand...
Click to collapse
I guess I am not acquainted with this forum enough then, thanks!

Most likely the cause of the fault would be updating via FlashFire and keeping root. When the update was flashed, it most likely flashed the stock kernel and patched it for root, which is not a compatible root for our devices. Flashing the root kernel with Odin probably would have made the phone boot normally.

Help! I just pulled an all nighter

My wife's camera stopped working on her phone. I read flashing back to a previous firmware might fix the issue. I thought it was worth a try (and easier) before physically cracking the phone open and examining the hardware. But boy was I sure wrong about that!
I've read so much crap about this within the past few hours my head could explode. But I think the problem is trying to source the correct firmware.
This is a SM-G935V with a snapdragon processor in it according to spec websites.
The baseband version is: G935VVRSBCTC1
I haven't figured out how to find the current PDA version on the phone yet, but when I was trying to flash it with random firmware with Odin, the phone screen gave me error message: Fused 11 > Binary 4
From what I read, I understand that to mean I'm trying to flash binary 4 over 11 and that won't work. The flash only works if the number is greater....or I'm hoping maybe it will work if the number is the same. I would be happy just to flash Android 8.0 at this point in any form just to see if the camera starts working again. I've already tried a factory reset, clearing camera app data and cache, booting into safe mode, and resetting phone settings to fix the camera - nothing worked.
Could anybody please help me figure out my current PDA version on the phone? Or help me source the correct firmware? I'm starting to think it might be easier just to root the phone and install that ONE UI with android 9 or the Lineage OS with Android 10. But I've never rooted a phone before, this is my first attempt at any of this and to be honest this phone is not giving me the confidence I need to attempt the root and new OS. I can't even get the current firmware to reinstall.
Any help would be very appreciated. Like I said, I've stayed up all night and I'm so freaking tired at this point. But I feel like I'm soooooo close.
I have an SD card with Magisk, no-verity-opt-encrypt, and twrp ready to go. I have Odin ready and installed Samsung USB. Do you guys think I should just try another firmware and root the phone? Any links to firmware that don't take 12 hours to download would be appreciated.

UPDATE!
I found the PDA version with that handy "Phone Info *Samsung*" app in the play store.
The PDA version is G935VVRSBCTC1 5TH DIGIT FROM THE RIGHT GIVES US THE FUSED BINARY "B". I guess when they got past the number 9 the switched to Alpha characters. I found some "A" firmwares on Updato.com. But I didn't see any with a "B". So there's a good chance the one's I'm trying to download over 12 hours right now won't work.
I also scrolled over to the "Hardware" section in the phone and it asked for access to the Camera. I gave it access. But now the field is blank/empty. I didn't populate any info on the Camera. I don't know if that means anything just wanted to point that out. Could still be firmware or hardware as far as I know.
Thanks, Derek
MajinMight said:
My wife's camera stopped working on her phone. I read flashing back to a previous firmware might fix the issue. I thought it was worth a try (and easier) before physically cracking the phone open and examining the hardware. But boy was I sure wrong about that!
I've read so much crap about this within the past few hours my head could explode. But I think the problem is trying to source the correct firmware.
This is a SM-G935V with a snapdragon processor in it according to spec websites.
The baseband version is: G935VVRSBCTC1
I haven't figured out how to find the current PDA version on the phone yet, but when I was trying to flash it with random firmware with Odin, the phone screen gave me error message: Fused 11 > Binary 4
From what I read, I understand that to mean I'm trying to flash binary 4 over 11 and that won't work. The flash only works if the number is greater....or I'm hoping maybe it will work if the number is the same. I would be happy just to flash Android 8.0 at this point in any form just to see if the camera starts working again. I've already tried a factory reset, clearing camera app data and cache, booting into safe mode, and resetting phone settings to fix the camera - nothing worked.
Could anybody please help me figure out my current PDA version on the phone? Or help me source the correct firmware? I'm starting to think it might be easier just to root the phone and install that ONE UI with android 9 or the Lineage OS with Android 10. But I've never rooted a phone before, this is my first attempt at any of this and to be honest this phone is not giving me the confidence I need to attempt the root and new OS. I can't even get the current firmware to reinstall.
Any help would be very appreciated. Like I said, I've stayed up all night and I'm so freaking tired at this point. But I feel like I'm soooooo close.
I have an SD card with Magisk, no-verity-opt-encrypt, and twrp ready to go. I have Odin ready and installed Samsung USB. Do you guys think I should just try another firmware and root the phone? Any links to firmware that don't take 12 hours to download would be appreciated.
Click to expand...
Click to collapse

UPDATE #2
As you can tell I haven't given up yet. I found my current firmware version for download on a different website:
https://samfrew.com/download/Galaxy__S7__edge__/b3kj/VZW/G935VVRSBCTC1/G935VVZWBCTC1/"]https://samfrew.com/download/Galaxy__S7__edge__/b3kj/VZW/G935VVRSBCTC1/G935VVZWBCTC1/
It's another slow download option which really sucks. But I'll be able to test If I can flash the same firmware to the phone (not technically a downgrade and carries the same fused binary). So we shall see. If this doesn't work I'll be looking into the other android 9 or 10 roms and rooting the phone.
Thanks, Derek
MajinMight said:
I found the PDA version with that handy "Phone Info *Samsung*" app in the play store.
The PDA version is G935VVRSBCTC1 5TH DIGIT FROM THE RIGHT GIVES US THE FUSED BINARY "B". I guess when they got past the number 9 the switched to Alpha characters. I found some "A" firmwares on Updato.com. But I didn't see any with a "B". So there's a good chance the one's I'm trying to download over 12 hours right now won't work.
I also scrolled over to the "Hardware" section in the phone and it asked for access to the Camera. I gave it access. But now the field is blank/empty. I didn't populate any info on the Camera. I don't know if that means anything just wanted to point that out. Could still be firmware or hardware as far as I know.
Thanks, Derek
Click to expand...
Click to collapse

TL/DR your full posts but I will cut to the chase on some points. If your phone is SM-G935V (US-Verizon) then you:
1) can NOT root binary B firmware. Binary A (10) yes, B (11) no, at least not until the ENG file becomes available- IF it ever comes. Official S7 support is next to dead.
2) even if you were lucky flashing binary A firmware and successfully rooted, you still would NOT be able to flash ANY custom ROM's such as Lineage. Also, Magisk is useless and will not work on our phones either.
US-spec Snapdragon phones are bootloader locked. There is no workaround. Locked bootloaders prevent flashing custom ROM's, kernels, etc. We are lucky we have root access and it took years just to get that. Bootloader unlocking will never happen for US-spec S7. Much as I love my S7e, if I ever have to replace it I will never get another US "Crapdragon" that you can't do anything with.
I do not know what the issue is with your camera. Maybe other forum members will have ideas. I do wish you luck getting everything back to normal.

Dang! Well thanks for the info! I guess all the videos I've seen with S7's and custom roms have not been done on the US-Verizon phone. What a bummer. Well this was a major learning experience at least.
My only idea now is to crack her open and make sure the camera didn't come unplugged from a drop. I also seen camera replacements were really cheap online. I don't know if it's worth my time....we are due for a phone upgrade anyway.
SkylineDriver said:
TL/DR your full posts but I will cut to the chase on some points. If your phone is SM-G935V (US-Verizon) then you:
1) can NOT root binary B firmware. Binary A (10) yes, B (11) no, at least not until the ENG file becomes available- IF it ever comes. Official S7 support is next to dead.
2) even if you were lucky flashing binary A firmware and successfully rooted, you still would NOT be able to flash ANY custom ROM's such as Lineage. Also, Magisk is useless and will not work on our phones either.
US-spec Snapdragon phones are bootloader locked. There is no workaround. Locked bootloaders prevent flashing custom ROM's, kernels, etc. We are lucky we have root access and it took years just to get that. Bootloader unlocking will never happen for US-spec S7. Much as I love my S7e, if I ever have to replace it I will never get another US "Crapdragon" that you can't do anything with.
I do not know what the issue is with your camera. Maybe other forum members will have ideas. I do wish you luck getting everything back to normal.
Click to expand...
Click to collapse