Stuck in CWM - G2 Q&A, Help & Troubleshooting

When i turn my phone on it shows the lg logo then goes to cwm no error code. Can anyone help it would be greatly appreciated.

CAM stuck
When i turn my phone on it shows the lg logo then goes to cwm no error code. Can anyone help it would be greatly appreciated.
It does this error when installing a rom help?

SmurFFF said:
When i turn my phone on it shows the lg logo then goes to cwm no error code. Can anyone help it would be greatly appreciated.
It does this error when installing a rom help?
Click to expand...
Click to collapse
Could be a bad ROM download. Try wiping data,cache and dalvik cache in CWM and booting up. If that doesnt work try sideloading another ROM .zip in (http://forum.xda-developers.com/showthread.php?t=2559200
Also, please don't create multiple thread on the same topic, it won't give you a reply any faster and will just clog up the Q&A forum. XDA is not a quick helpline, it is a forum.

sideload
aliaksei said:
Could be a bad ROM download. Try wiping data,cache and dalvik cache in CWM and booting up. If that doesnt work try sideloading another ROM .zip in (http://forum.xda-developers.com/showthread.php?t=2559200
Also, please don't create multiple thread on the same topic, it won't give you a reply any faster and will just clog up the Q&A forum. XDA is not a quick helpline, it is a forum.
Click to expand...
Click to collapse
When I try to sideload it says no device and I set it up on the phone

Did you make a nandroid? If not do you have access to an OTG cable?
Sent from my VS980 4G using xda app-developers app

otg cable?
No nandroid. And what do u mean by otg cable?

SmurFFF said:
When I try to sideload it says no device and I set it up on the phone
Click to expand...
Click to collapse
ensure you have the correct drivers installed on your pc
---------- Post added at 08:14 PM ---------- Previous post was at 08:12 PM ----------
SmurFFF said:
No nandroid. And what do u mean by otg cable?
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/USB_On-The-Go

aliaksei said:
ensure you have the correct drivers installed on your pc
---------- Post added at 08:14 PM ---------- Previous post was at 08:12 PM ----------
http://en.wikipedia.org/wiki/USB_On-The-Go
Click to expand...
Click to collapse
As far as i know i have the drivers installed and im pretty sure i have a otg cable

Related

Can't boot into Clockwork Recovery

Hi guys,
So just received my Nexus 7, the device is rooted and i'm trying to flash clockworkmod to the device.
So far, i've tried both of the toolkits in the developement section, ROM Manager and also flashing the recovery through ADB with the images in the development section too...
With some of them, after selecting recovery from the bootloader, it just stays on the "Google" logo, on other, it just boots up.
The device has no issue's booting, it's just Clockwork that won't boot.
Any ideas please?
Thanks.
SWFlyerUK said:
Hi guys,
So just received my Nexus 7, the device is rooted and i'm trying to flash clockworkmod to the device.
So far, i've tried both of the toolkits in the developement section, ROM Manager and also flashing the recovery through ADB with the images in the development section too...
With some of them, after selecting recovery from the bootloader, it just stays on the "Google" logo, on other, it just boots up.
The device has no issue's booting, it's just Clockwork that won't boot.
Any ideas please?
Thanks.
Click to expand...
Click to collapse
Have you rebooted into recovery after flashing and made it perminent? Otherwise the stock recovery will get flashed back (immediately)..
http://www.androidauthority.com/nexus-7-root-unlock-bootloader-clockworkmod-recovery-cwm-100890/
Usually I temp boot CWM, but today I flashed it on both my GNex & Nexus7. Can easily go back to stock recovery if required...
Thanks for the link mate, hadn't seen that one before and indeed, CWM is now working.
Much appreciated.
SWFlyerUK said:
Thanks for the link mate, hadn't seen that one before and indeed, CWM is now working.
Much appreciated.
Click to expand...
Click to collapse
No problem. When you exit CWM it tries to fix it anyway. Not sure if it just moves the file or what, but the key is to boot into CWM straight after flashing it (I made the same mistake this morning)..
I'm having the exact same issue...so If I re flash the Recovery as Markey Said will I lose the contents of my Internal memory or not?
hope this helps
MassiveDRS said:
I'm having the exact same issue...so If I re flash the Recovery as Markey Said will I lose the contents of my Internal memory or not?
Click to expand...
Click to collapse
if your using cwm i found to boot into recovery you have to have the 7 plugged into your computer with the micro usb..i dont know why but it worked for me..are you using the side bottons to get into recovery..if so plugged the cable in first then try to enter recovery
Easiest way is grab quick boot from the play store and it will let u reboot to cwm.. As above said a pc is needed because of a bug.. U can also do it connected to a phone if u have otg cable
Sent from my GT-N7000 using Tapatalk 2
or you can use ROM manager and reboot from there in cwm
capoooro said:
or you can use ROM manager and reboot from there in cwm
Click to expand...
Click to collapse
That's what I do. Works great.
Sent from my Nexus 7 using xda premium
kuczmad said:
if your using cwm i found to boot into recovery you have to have the 7 plugged into your computer with the micro usb..i dont know why but it worked for me..are you using the side bottons to get into recovery..if so plugged the cable in first then try to enter recovery
Click to expand...
Click to collapse
Yup it is working now Thanx bro
---------- Post added at 05:47 PM ---------- Previous post was at 05:42 PM ----------
capoooro said:
or you can use ROM manager and reboot from there in cwm
Click to expand...
Click to collapse
I already Know that
but I'm asking about the button combo approach because, it is very important ; in case you brick your device and you can't boot it and obviously you cant lauche rom manger
MassiveDRS said:
Yup it is working now Thanx bro
---------- Post added at 05:47 PM ---------- Previous post was at 05:42 PM ----------
I already Know that
but I'm asking about the button combo approach because, it is very important ; in case you brick your device and you can't boot it and obviously you cant lauche rom manger
Click to expand...
Click to collapse
You can access CWM through the power, up, down method and choosing recovery mode.... the tablet MUST be plugged in though... at least for me it does. Running CWM6 Touch....

[Q] nexus 4 completely broken

I was trying to flash something onto my phone and it didnt go well. It gets stuck at the google sign but goes no further, I can still get into clockwork recovery but when I try to reset to factory image and delete cache etc it has no effect. My computer also wont recognise the phone anymore. Ive no idea what to do, any help would be much appreciated
Fungie89 said:
I was trying to flash something onto my phone and it didnt go well. It gets stuck at the google sign but goes no further, I can still get into clockwork recovery but when I try to reset to factory image and delete cache etc it has no effect. My computer also wont recognise the phone anymore. Ive no idea what to do, any help would be much appreciated
Click to expand...
Click to collapse
you cant "reset" to factory image via your recovery, that is done vua the bootloader and fastboot. you can push a good rom to your phone via your recovery and adb push, then flash it.
f
simms22 said:
you cant "reset" to factory image via your recovery, that is done vua the bootloader and fastboot. you can push a good rom to your phone via your recovery and adb push, then flash it.
Click to expand...
Click to collapse
Thanks for you reply. How can I do this when my computer wont recognize my phone?
Fungie89 said:
f
Thanks for you reply. How can I do this when my computer wont recognize my phone?
Click to expand...
Click to collapse
install the right android drivers onto your computer. itll recognize your phone then. btw, what did you flash?
simms22 said:
install the right android drivers onto your computer. itll recognize your phone then. btw, what did you flash?
Click to expand...
Click to collapse
Ill give it a go. I was trying to install the beats app to my nexus to improve the headphone sound. I've found it a bit weak.
Fungie89 said:
Ill give it a go. I was trying to install the beats app to my nexus to improve the headphone sound. I've found it a bit weak.
Click to expand...
Click to collapse
you should try viper4android, free at the play store. root is needed. it installs its own sound driver, and has controls to set it up. ever since installing it, my n4 has never sounded better.
simms22 said:
you should try viper4android, free at the play store. root is needed. it installs its own sound driver, and has controls to set it up. ever since installing it, my n4 has never sounded better.
Click to expand...
Click to collapse
Will do if I can unbrick it that is!
nitness divites
simms22 said:
you should try viper4android, free at the play store. root is needed. it installs its own sound driver, and has controls to set it up. ever since installing it, my n4 has never sounded better.
Click to expand...
Click to collapse
I tried installing the drivers but it wouldnt allow me. ive included a screenshot of my device manager screen.
Fungie89 said:
I tried installing the drivers but it wouldnt allow me. ive included a screenshot of my device manager screen.
Click to expand...
Click to collapse
wont allow you? error? theres a universal android driver by koush, try installing that one. google it, it should be easy to find.
---------- Post added at 05:49 PM ---------- Previous post was at 05:48 PM ----------
theres also this http://adbdriver.com/
simms22 said:
wont allow you? error? theres a universal android driver by koush, try installing that one. google it, it should be easy to find.
---------- Post added at 05:49 PM ---------- Previous post was at 05:48 PM ----------
theres also this http://adbdriver.com/
Click to expand...
Click to collapse
Ive done that but it doesnt find any devices since the comp doesnt recognise the phone properly. ive attached a picture
Is it detected in fastboot mode? You flash a stock image using fastboot...
And you have to be in recovery for adb to work, your phone won't be detected on Google logo :?
Sent from my Nexus 4 using Tapatalk 4
Fungie89 said:
Ive done that but it doesnt find any devices since the comp doesnt recognise the phone properly. ive attached a picture
Click to expand...
Click to collapse
are you in your bootloader when connecting? itll only see your device when in the bootloader(fastboot).
---------- Post added at 06:58 PM ---------- Previous post was at 06:45 PM ----------
http://forum.xda-developers.com/showthread.php?t=2010312
hackergnome said:
Is it detected in fastboot mode? You flash a stock image using fastboot...
And you have to be in recovery for adb to work, your phone won't be detected on Google logo :?
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
ok the device has been found when in recovery mode. what is the fastboot command needed? I have the zip file ready
Follow this tutorial http://forum.xda-developers.com/showthread.php?p=34552123
Sent from my Nexus 4 using xda app-developers app

[Q] Might have a brick. Error is "Secure booting unsuccessful!" (VS980)

So I just flashed this ROM in TWRP: http://forum.xda-developers.com/showthread.php?t=2533018
And when I rebooted all I get is the LG logo followed by a black screen with the following:
Secure booting unsuccessful!
Cause :
When I plug it into my computer it never gets recognized. It appears to be stuck in a bootloop.
Advice?
TubbyMofo said:
So I just flashed this ROM in TWRP: http://forum.xda-developers.com/showthread.php?t=2533018
And when I rebooted all I get is the LG logo followed by a black screen with the following:
Secure booting unsuccessful!
Cause :
When I plug it into my computer it never gets recognized. It appears to be stuck in a bootloop.
Advice?
Click to expand...
Click to collapse
Put the phone in recovery mode and install backup
---------- Post added at 05:57 PM ---------- Previous post was at 05:48 PM ----------
I'd be glad to help you. Email me at [email protected] to be able to communicate more efficiently as checking these posts can be a hassle.
joewaz said:
Put the phone in recovery mode and install backup
---------- Post added at 05:57 PM ---------- Previous post was at 05:48 PM ----------
I'd be glad to help you. Email me at [email protected] to be able to communicate more efficiently as checking these posts can be a hassle.
Click to expand...
Click to collapse
Yeah, I wasn't sure how to get to recovery but I found the way using the physical buttons.
But now I've restored my backup and the phone is stuck at the LG logo on boot. Oy.
TubbyMofo said:
Yeah, I wasn't sure how to get to recovery but I found the way using the physical buttons.
But now I've restored my backup and the phone is stuck at the LG logo on boot. Oy.
Click to expand...
Click to collapse
I'm sorry I received your email but I am having your problems with my gmail. did you wipe the coach,sys,dalv,and data before restore
joewaz said:
I'm sorry I received your email but I am having your problems with my gmail. did you wipe the coach,sys,dalv,and data before restore
Click to expand...
Click to collapse
No. Crap.
TubbyMofo said:
No. Crap.
Click to expand...
Click to collapse
Search lg stock ROM .. Click on first link by xda.. There ya go.
joewaz said:
Search lg stock ROM .. Click on first link by xda.. There ya go.
Click to expand...
Click to collapse
Yeah, I've been downloading the stuff for that. But I can't get my damn phone to power off lol
TubbyMofo said:
Yeah, I've been downloading the stuff for that. But I can't get my damn phone to power off lol
Click to expand...
Click to collapse
Get it back in recovery mode and turn it off using twrp
Found a fix
soooo i was having the same security error u guys... I have the vs980 btw...so i went into recovery (twrp 2.7) and flashed a stock rom... it boots up now....but when i try to install a custom rom again DENIED back to security error so i'm not sure whats up with that i will let u guys know when i figure out how to get that figured out

[SOLVED] Stuck at boot logo on reboot

Ever since CM10.2 came out I've not been able to get it to work. Everytime I flashed the rom it would work on the first boot, then after a reboot it would hang at the boot logo. CM11 did exactly the same thing. No amount of wiping this or flashing that fixed the problem. I've seen many other people with the same symptoms posting on this forum and others and most of them use the same solution I did: revert to CM10.1 or similar.
Today I solved my problem. The solution that worked for me was to use the TWRP 2.6.3.0 from Dhacker29 (twrp263_xt907.img), flash that to recovery then install the zips from there. I can't post a link because of forum restrictions but put androidhosting.org/Devs/Dhacker29/msm8960/ infront of that file name and you'll be there.
It sounds really simple and I've seen people say "just use TWRP 2.6.3.0 and it will work", but not all TWRP 2.6.3.0 images are the same apparently. I was using TWRP 2.6.3.0 before and it never worked. I tried downloading it from multiple sources and it still didn't work. Dhacker29's version is slightly different and worked perfectly. I don't know why my phone was picky about it and most other people don't have a problem, but I know I'm not the only one and I just wanted to share the solution.
Here is Dhackers flashable. I did not know there was a difference but the md5 is different from my regular one : e33eac18b87c826155f383169b3a17a4
For the recovery.img inside. twrp263_xt907.img.
My other twrp 263, not sure of the source, but I think mattlgroff :
Md5 : 791c142be27a541ea36b9fc97c684a50
The 791' is the one I suspect of bad behaviour.
I am not rooted or anything
So my problem is when I turn on the device it will just hang up on the animated boot of the red eye. I can enter the stock recovery without any problems and can get to fastboot. The fastboot screen says its locked. So I have tried rsdlite and VRZ_XT907_9.8.1Q-94-1_CFC.img to flash the stock rom on it. rsdlite says that it finished but the phone just remains on the red eye boot animation. can anyone give me some help.
thanks in advance.
again not rooted or custom mod, can fully boot, fastboot locked.
cokekid76 said:
So my problem is when I turn on the device it will just hang up on the animated boot of the red eye. I can enter the stock recovery without any problems and can get to fastboot. The fastboot screen says its locked. So I have tried rsdlite and VRZ_XT907_9.8.1Q-94-1_CFC.img to flash the stock rom on it. rsdlite says that it finished but the phone just remains on the red eye boot animation. can anyone give me some help.
thanks in advance.
again not rooted or custom mod, can fully boot, fastboot locked.
Click to expand...
Click to collapse
You should wipe data before you restore.
For now boot recovery, push both vol keys for 3 sec @ the dead robot, wipe data.
Ok just did this and it is still stuck at the red eye. The screen isnt frozen it is sparking and stuff but it won't leave this and finish booting. Help!
Sent from my SAMSUNG-SGH-I317 using Tapatalk
cokekid76 said:
Ok just did this and it is still stuck at the red eye. The screen isnt frozen it is sparking and stuff but it won't leave this and finish booting. Help!
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Wipe data again, go direct to fastboot & rsd....
Be sure to verify the md5.
http://forum.xda-developers.com/showpost.php?p=48380933&postcount=2
1st why is there 2 files and what order did they need to be done.
aviwdoowks said:
Wipe data again, go direct to fastboot & rsd....
Be sure to verify the md5.
http://forum.xda-developers.com/showpost.php?p=48380933&postcount=2
Click to expand...
Click to collapse
2nd they both passed md5. then I put the vrz_xt907_9.8.1q-94_cfc.xml.zip through rsd and it failed. So I ran the other one, vrz_xt907_9.8.1q-78-1_1ff.orig.xml.zip, and rsd completed. But it still gets hung up on reboot and wont go pass the red eye. even after waiting 5min for it to boot. rsd is now telling me to manually reboot the device. So I did and waited another 5mins and still stuck at red eye. what is the other file that rsd failed on for. And what am I doing wrong here.
cokekid76 said:
2nd they both passed md5. then I put the vrz_xt907_9.8.1q-94_cfc.xml.zip through rsd and it failed. So I ran the other one, vrz_xt907_9.8.1q-78-1_1ff.orig.xml.zip, and rsd completed. But it still gets hung up on reboot and wont go pass the red eye. even after waiting 5min for it to boot. rsd is now telling me to manually reboot the device. So I did and waited another 5mins and still stuck at red eye. what is the other file that rsd failed on for. And what am I doing wrong here.
Click to expand...
Click to collapse
the xml must selected from the unzipped folder & use rsd 615
---------- Post added at 01:36 PM ---------- Previous post was at 01:34 PM ----------
Did rsd count out all it's partition writes? 1 to 23 or so?
Rsd did 1-17.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
cokekid76 said:
Rsd did 1-17.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
So what does 17 say? It must have failed cause it goes to 20 something
---------- Post added at 03:19 PM ---------- Previous post was at 02:47 PM ----------
22 for stock w/ getvar & erase user data, I think.
15 was system 16 is wipe cashe 17 is wipe data or reverse the last 2
Sent from my KFOT using Tapatalk
cokekid76 said:
15 was system 16 is wipe cashe 17 is wipe data or reverse the last 2
Sent from my KFOT using Tapatalk
Click to expand...
Click to collapse
So no errors?
I am stumped. Post a SS of your rsd screen. Make sure you try a boot with the usb plug removed.
---------- Post added at 03:38 PM ---------- Previous post was at 03:36 PM ----------
You are missing some steps zip up the xml & up it right here. Just the xml ~ 1kb.
---------- Post added at 03:45 PM ---------- Previous post was at 03:38 PM ----------
Just as well to paste the text of the xml to a post.
---------- Post added at 03:48 PM ---------- Previous post was at 03:45 PM ----------
Where did you get the xml?
I'll try to get the info for you guys tomorrow
Sent from my SAMSUNG-SGH-I317 using Tapatalk
The same problem!!
My phone is stucked on the red ball and I don't urderstand anything u guys are saying. Could please in human language?
Thanks in advance!
matitor said:
My phone is stucked on the red ball and I don't urderstand anything u guys are saying. Could please in human language?
Thanks in advance!
Click to expand...
Click to collapse
Xml is the fxz, restore .zip.
That zip needs to be extracted to a "work" folder. Install the latest moto drivers from the moto site. On a mac use parallels desktop.
Run rsd lite 615 & choose the .xml file from the rsd ... button.
Use the latest fxz/xml.zip - ...94 which will lock your boot if you come from ...66 or earlier if you are not unlocked beforehand!
If on ...78 or earlier remove the getvar line from the xml commands.
aviwdoowks said:
Xml is the fxz, restore .zip.
That zip needs to be extracted to a "work" folder. Install the latest moto drivers from the moto site. On a mac use parallels desktop.
Run rsd lite 615 & choose the .xml file from the rsd ... button.
Use the latest fxz/xml.zip - ...94 which will lock your boot if you come from ...66 or earlier if you are not unlocked beforehand!
If on ...78 or earlier remove the getvar line from the xml commands.
Click to expand...
Click to collapse
I got this message...phone returned fail.. see the image attach
matitor said:
I got this message...phone returned fail.. see the image attach
Click to expand...
Click to collapse
Please do not even post with out phone sw build & boot lock status
Meow meow ...bark bark bark ... What does the fox say..... Sorry couldn't help it
Sent from my XT907 using xda app-developers app
ezknives said:
Meow meow ...bark bark bark ... What does the fox say..... Sorry couldn't help it
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
What do you mean?
Human language
Sent from my XT907 using xda app-developers app

[Q] Please help: Security Error

I flashed ck-1.3-g2_d802.zip on my D802 and white Lines issue occurs
Then I followed steps in the thread <<[KERNEL] Stock KitKat kernels & White Lines issue fix>>
and i flashed the kernel I downloaded here: http://forum.xda-developers.com/showpost.php?p=52414185&postcount=122
then Security Error occurs whenever I tried to reboot my g2
What can I do next
anyone help
I am in CloudyG3 1.1 Rom
Herbertcamel said:
anyone help
I am in CloudyG3 1.1 Rom
Click to expand...
Click to collapse
Have you tried reflashing the ROM?
oadam11 said:
Have you tried reflashing the ROM?
Click to expand...
Click to collapse
I have stuck in saft mode now and cannot launch any applications
I have tried factory hard reset but cannot go into recovery mode either
I cannot control my phone now
What can I do:crying:
Herbertcamel said:
I have stuck in saft mode now and cannot launch any applications
I have tried factory hard reset but cannot go into recovery mode either
I cannot control my phone now
What can I do:crying:
Click to expand...
Click to collapse
Can you get into download mode? To do this, power off the device and then hold the volume up button and connect the charger while continuing to hold the volume up Button until you see the download mode
---------- Post added at 09:35 AM ---------- Previous post was at 09:34 AM ----------
If you can, you can follow this guide to restore to stock and you should be good to go. http://forum.xda-developers.com/showthread.php?t=2432476
oadam11 said:
Can you get into download mode? To do this, power off the device and then hold the volume up button and connect the charger while continuing to hold the volume up Button until you see the download mode
---------- Post added at 09:35 AM ---------- Previous post was at 09:34 AM ----------
If you can, you can follow this guide to restore to stock and you should be good to go. http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
I can get into download mode
but i have no ideas to choose which one here :http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/
Herbertcamel said:
I can get into download mode
but i have no ideas to choose which one here :http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/
Click to expand...
Click to collapse
What variant do you have?
oadam11 said:
What variant do you have?
Click to expand...
Click to collapse
D802
---------- Post added at 09:56 AM ---------- Previous post was at 09:53 AM ----------
Herbertcamel said:
D802
Click to expand...
Click to collapse
I think this is correct. storagecow.eu/index.php?dir=Xda/LG+G2/Stock/D802+tot/ you will probably have to rename the file extension to .tot
oadam11 said:
I think this is correct. storagecow.eu/index.php?dir=Xda/LG+G2/Stock/D802+tot/ you will probably have to rename the file extension to .tot
Click to expand...
Click to collapse
There are three files there
which should I use
---------- Post added at 10:02 AM ---------- Previous post was at 10:02 AM ----------
Herbertcamel said:
There are three files there
which should I use
Click to expand...
Click to collapse
It depends on your location. For example , there is a European model, Brazil model, etc. What location is yours?
oadam11 said:
---------- Post added at 10:02 AM ---------- Previous post was at 10:02 AM ----------
It depends on your location. For example , there is a European model, Brazil model, etc. What location is yours?
Click to expand...
Click to collapse
Hong Kong
Herbertcamel said:
Hong Kong
Click to expand...
Click to collapse
OK. Last question lol. 16gb or 32gb?
oadam11 said:
OK. Last question lol. 16gb or 32gb?
Click to expand...
Click to collapse
I can only reply each 5 minutes /_\
16gb
Herbertcamel said:
I can only reply each 5 minutes /_\
16gb
Click to expand...
Click to collapse
Ok. Download this file and use the kdz method to restore to stock. http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW575795432109876543213/D80220B_00.kdz
oadam11 said:
Ok. Download this file and use the kdz method to restore to stock. http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW575795432109876543213/D80220B_00.kdz
Click to expand...
Click to collapse
SO,.....
many questions to ask lol
which, Normal or CSE flash should i choose
I want to keep my mobile storage(photos)
according to the descriptions
if I choose CSE I will lose all my data
but if I choose Normal I may have boot loop issue
Herbertcamel said:
SO,.....
many questions to ask lol
which, Normal or CSE flash should i choose
I want to keep my mobile storage(photos)
according to the descriptions
if I choose CSE I will lose all my data
but if I choose Normal I may have boot loop issue
Click to expand...
Click to collapse
CSE would probably be the way to go. Try doing a normal bootup and connect your phone to your Pc. See if the pc will recognize it and then try to backup your data.
If that fails and the data is important, I would try the Normal method and hope that it will be successful. If not then CSE.
oadam11 said:
CSE would probably be the way to go. Try doing a normal bootup and connect your phone to your Pc. See if the pc will recognize it and then try to backup your data.
If that fails and the data is important, I would try the Normal method and hope that it will be successful. If not then CSE.
Click to expand...
Click to collapse
No response from PC after normal bootup, sotrying Normal Flash
anyway , thanks so much
Herbertcamel said:
No response from PC after normal bootup, sotrying Normal Flash
anyway , thanks so much
Click to expand...
Click to collapse
NP. And after normal flash, even if it fails to boot, again try to see if the computer will recognize it to retrieve your data before you must use the CSE method
oadam11 said:
CSE would probably be the way to go. Try doing a normal bootup and connect your phone to your Pc. See if the pc will recognize it and then try to backup your data.
If that fails and the data is important, I would try the Normal method and hope that it will be successful. If not then CSE.
Click to expand...
Click to collapse
Big problem please help
after flashing completed and my phone rebooted
it said
com.android.phone has stopped
com.android.systemui has stopped
and looooooooooooooop.......

Categories

Resources