[SOLVED] Stuck at boot logo on reboot - Droid RAZR M Q&A, Help & Troubleshooting

Ever since CM10.2 came out I've not been able to get it to work. Everytime I flashed the rom it would work on the first boot, then after a reboot it would hang at the boot logo. CM11 did exactly the same thing. No amount of wiping this or flashing that fixed the problem. I've seen many other people with the same symptoms posting on this forum and others and most of them use the same solution I did: revert to CM10.1 or similar.
Today I solved my problem. The solution that worked for me was to use the TWRP 2.6.3.0 from Dhacker29 (twrp263_xt907.img), flash that to recovery then install the zips from there. I can't post a link because of forum restrictions but put androidhosting.org/Devs/Dhacker29/msm8960/ infront of that file name and you'll be there.
It sounds really simple and I've seen people say "just use TWRP 2.6.3.0 and it will work", but not all TWRP 2.6.3.0 images are the same apparently. I was using TWRP 2.6.3.0 before and it never worked. I tried downloading it from multiple sources and it still didn't work. Dhacker29's version is slightly different and worked perfectly. I don't know why my phone was picky about it and most other people don't have a problem, but I know I'm not the only one and I just wanted to share the solution.

Here is Dhackers flashable. I did not know there was a difference but the md5 is different from my regular one : e33eac18b87c826155f383169b3a17a4
For the recovery.img inside. twrp263_xt907.img.
My other twrp 263, not sure of the source, but I think mattlgroff :
Md5 : 791c142be27a541ea36b9fc97c684a50
The 791' is the one I suspect of bad behaviour.

I am not rooted or anything
So my problem is when I turn on the device it will just hang up on the animated boot of the red eye. I can enter the stock recovery without any problems and can get to fastboot. The fastboot screen says its locked. So I have tried rsdlite and VRZ_XT907_9.8.1Q-94-1_CFC.img to flash the stock rom on it. rsdlite says that it finished but the phone just remains on the red eye boot animation. can anyone give me some help.
thanks in advance.
again not rooted or custom mod, can fully boot, fastboot locked.

cokekid76 said:
So my problem is when I turn on the device it will just hang up on the animated boot of the red eye. I can enter the stock recovery without any problems and can get to fastboot. The fastboot screen says its locked. So I have tried rsdlite and VRZ_XT907_9.8.1Q-94-1_CFC.img to flash the stock rom on it. rsdlite says that it finished but the phone just remains on the red eye boot animation. can anyone give me some help.
thanks in advance.
again not rooted or custom mod, can fully boot, fastboot locked.
Click to expand...
Click to collapse
You should wipe data before you restore.
For now boot recovery, push both vol keys for 3 sec @ the dead robot, wipe data.

Ok just did this and it is still stuck at the red eye. The screen isnt frozen it is sparking and stuff but it won't leave this and finish booting. Help!
Sent from my SAMSUNG-SGH-I317 using Tapatalk

cokekid76 said:
Ok just did this and it is still stuck at the red eye. The screen isnt frozen it is sparking and stuff but it won't leave this and finish booting. Help!
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Wipe data again, go direct to fastboot & rsd....
Be sure to verify the md5.
http://forum.xda-developers.com/showpost.php?p=48380933&postcount=2

1st why is there 2 files and what order did they need to be done.
aviwdoowks said:
Wipe data again, go direct to fastboot & rsd....
Be sure to verify the md5.
http://forum.xda-developers.com/showpost.php?p=48380933&postcount=2
Click to expand...
Click to collapse
2nd they both passed md5. then I put the vrz_xt907_9.8.1q-94_cfc.xml.zip through rsd and it failed. So I ran the other one, vrz_xt907_9.8.1q-78-1_1ff.orig.xml.zip, and rsd completed. But it still gets hung up on reboot and wont go pass the red eye. even after waiting 5min for it to boot. rsd is now telling me to manually reboot the device. So I did and waited another 5mins and still stuck at red eye. what is the other file that rsd failed on for. And what am I doing wrong here.

cokekid76 said:
2nd they both passed md5. then I put the vrz_xt907_9.8.1q-94_cfc.xml.zip through rsd and it failed. So I ran the other one, vrz_xt907_9.8.1q-78-1_1ff.orig.xml.zip, and rsd completed. But it still gets hung up on reboot and wont go pass the red eye. even after waiting 5min for it to boot. rsd is now telling me to manually reboot the device. So I did and waited another 5mins and still stuck at red eye. what is the other file that rsd failed on for. And what am I doing wrong here.
Click to expand...
Click to collapse
the xml must selected from the unzipped folder & use rsd 615
---------- Post added at 01:36 PM ---------- Previous post was at 01:34 PM ----------
Did rsd count out all it's partition writes? 1 to 23 or so?

Rsd did 1-17.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

cokekid76 said:
Rsd did 1-17.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
So what does 17 say? It must have failed cause it goes to 20 something
---------- Post added at 03:19 PM ---------- Previous post was at 02:47 PM ----------
22 for stock w/ getvar & erase user data, I think.

15 was system 16 is wipe cashe 17 is wipe data or reverse the last 2
Sent from my KFOT using Tapatalk

cokekid76 said:
15 was system 16 is wipe cashe 17 is wipe data or reverse the last 2
Sent from my KFOT using Tapatalk
Click to expand...
Click to collapse
So no errors?
I am stumped. Post a SS of your rsd screen. Make sure you try a boot with the usb plug removed.
---------- Post added at 03:38 PM ---------- Previous post was at 03:36 PM ----------
You are missing some steps zip up the xml & up it right here. Just the xml ~ 1kb.
---------- Post added at 03:45 PM ---------- Previous post was at 03:38 PM ----------
Just as well to paste the text of the xml to a post.
---------- Post added at 03:48 PM ---------- Previous post was at 03:45 PM ----------
Where did you get the xml?

I'll try to get the info for you guys tomorrow
Sent from my SAMSUNG-SGH-I317 using Tapatalk

The same problem!!
My phone is stucked on the red ball and I don't urderstand anything u guys are saying. Could please in human language?
Thanks in advance!

matitor said:
My phone is stucked on the red ball and I don't urderstand anything u guys are saying. Could please in human language?
Thanks in advance!
Click to expand...
Click to collapse
Xml is the fxz, restore .zip.
That zip needs to be extracted to a "work" folder. Install the latest moto drivers from the moto site. On a mac use parallels desktop.
Run rsd lite 615 & choose the .xml file from the rsd ... button.
Use the latest fxz/xml.zip - ...94 which will lock your boot if you come from ...66 or earlier if you are not unlocked beforehand!
If on ...78 or earlier remove the getvar line from the xml commands.

aviwdoowks said:
Xml is the fxz, restore .zip.
That zip needs to be extracted to a "work" folder. Install the latest moto drivers from the moto site. On a mac use parallels desktop.
Run rsd lite 615 & choose the .xml file from the rsd ... button.
Use the latest fxz/xml.zip - ...94 which will lock your boot if you come from ...66 or earlier if you are not unlocked beforehand!
If on ...78 or earlier remove the getvar line from the xml commands.
Click to expand...
Click to collapse
I got this message...phone returned fail.. see the image attach

matitor said:
I got this message...phone returned fail.. see the image attach
Click to expand...
Click to collapse
Please do not even post with out phone sw build & boot lock status

Meow meow ...bark bark bark ... What does the fox say..... Sorry couldn't help it
Sent from my XT907 using xda app-developers app

ezknives said:
Meow meow ...bark bark bark ... What does the fox say..... Sorry couldn't help it
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
What do you mean?

Human language
Sent from my XT907 using xda app-developers app

Related

WTF is going on ?? brick or wad the hell ?

hi all i just flashed nightly cm9 and my tab went nuts ...it auto shutdown when i disconnect the charger ( the batetry is 68 % ) so i flashed back to stock and now it is in a bootloop , i tried going into download mode but after flashing and all that still it bootloops ..even in flashing in cwm brings no good ....so any help ??
How do you restock.
Overcome GB stock safe v5 using Odin with pit file and repartition selected?
Sent from my GT-I9300 using xda app-developers app
tohno said:
hi all i just flashed nightly cm9 and my tab went nuts ...it auto shutdown when i disconnect the charger ( the batetry is 68 % ) so i flashed back to stock and now it is in a bootloop , i tried going into download mode but after flashing and all that still it bootloops ..even in flashing in cwm brings no good ....so any help ??
Click to expand...
Click to collapse
No, your not "bricked". If you can get into download or recovery your fine, a bootloop just means you screwed something up and didnt flash correctly or correct roim maybe.
Start over, restock using overcome guide/pack, then flash the correct cm9 via recovery for your model/variant.
wifi
after installing cm10 my wifi doesn't work.
how can i fix it?
---------- Post added at 08:54 PM ---------- Previous post was at 08:42 PM ----------
and other problem i can't post on cm10 post.
king-heart said:
after installing cm10 my wifi doesn't work.
How can i fix it?
---------- post added at 08:54 pm ---------- previous post was at 08:42 pm ----------
and other problem i can't post on cm10 post.
Click to expand...
Click to collapse
the wifi is working..........got to advanced menu in wifi and uncheck the temporary avoiding wifi option...might help
No way to avoid stock when "only" CWM recovery is "gone"
Hi all,
the last CW-9 nightly update finally did it... boot loop and CWM recovery can not be selected any more (Vol UP and Power). Download mode (Vol DOWN and Power) works, but I would really hate to restock, because my only nandroid backup and Titanium backups are on the internal SD and that would get formatted in the process.
I looked around for other phones and it seems as if they can simply load an image of CWM 6.xxx via ODIN (I tried fastboot but that did not find my device at all).
I could not find any CWM V6 image as a .tar file anywhere. Anyony have a link?
Does anyone know a simple and fast way to get back my nandroid state WITHOUT restock?
Thanks
rgbigel said:
Hi all,
the last CW-9 nightly update finally did it... boot loop and CWM recovery can not be selected any more (Vol UP and Power). Download mode (Vol DOWN and Power) works, but I would really hate to restock, because my only nandroid backup and Titanium backups are on the internal SD and that would get formatted in the process.
I looked around for other phones and it seems as if they can simply load an image of CWM 6.xxx via ODIN (I tried fastboot but that did not find my device at all).
I could not find any CWM V6 image as a .tar file anywhere. Anyony have a link?
Does anyone know a simple and fast way to get back my nandroid state WITHOUT restock?
Thanks
Click to expand...
Click to collapse
Our tab has no fastboot
Anyway
Read this
http://forum.xda-developers.com/showthread.php?t=1831804
Sent from my GT-P1000 using xda app-developers app
priyana said:
Our tab has no fastboot
Anyway
Read this
http://forum.xda-developers.com/showthread.php?t=1831804
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Thanks pressed for that! At least now I know why fastboot did not work...
Still, does anyone know if I can fix the boot image with Odin ... or Heimdal or whatever?
Did yu read it or not?
The guy has your exact problem and solved.
But since you ask again.
extract the boot.img from good package and
heimdall flash --kernel ./boot.img --recovery ./boot.img
Sent from my GT-P1000 using xda app-developers app
priyana said:
Did yu read it or not?
The guy has your exact problem and solved.
But since you ask again.
extract the boot.img from good package and
heimdall flash --kernel ./boot.img --recovery ./boot.img
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yesss Sir, I did read. But maybe you sent the wrong link, because your "answer" (not his) points a an open question. Or how do you read his last sentence "does anybody know how I can go about doing this?" -- As to the heimdall solution, I tried that, only to find that it was unable to write to my internal SD. So, i guess the partition scheme got messed up :crying::crying::crying:
Anyway, I gave up (this time) and restocked. Back to my last accessible data backup from May...:crying:
Should somebody still find a "real" answer, please do respond. Even if the answer should be a clear "it can't be done", so be it. Or ask St. :angel: CDESAI to please please make "our" version of CW Reboot.
I sent you the right link for those who messed up their kernel .
If your partition gone bad then no wonder it won't work.
Now you have restocked, you can always start from scratch.
Sent from my GT-P1000 using xda app-developers app
Fixed
tohno said:
Fixed
Click to expand...
Click to collapse
Hi,
Not addressed to you, Sir!
Someone else who posted on your thread

Reflasing JB...

I updated to JB and rooted the device, but accidently deleted some system file, I was trying to reflash JB by going to Recovery mode and choose the JB ZIP file again like flashing from ICS but not success. Does anyone know what's the problem? I'm noob and also was searching all around but no success yet. ..
Pls helppppp ...
simpledave said:
I updated to JB and rooted the device, but accidently deleted some system file, I was trying to reflash JB by going to Recovery mode and choose the JB ZIP file again like flashing from ICS but not success. Does anyone know what's the problem? I'm noob and also was searching all around but no success yet. ..
Pls helppppp ...
Click to expand...
Click to collapse
Maybe its not allowing it since it is already updated. You could revert to ICS then start over and that should do the trick.
Sent from my XT907 using xda app-developers app
Yeah i'm downloading the Fastboot file 4.0.4 .. does anyone know how to do after that.. I'm reading forum but still have no idea how.. What to do with RDS ?
The fastboot file i downloaded is VZW_XT907_4.0.4-7.7.1Q-144_SMQ_S1-36-10_CFC.xml.zip with size of 650 MB .. I have no idea how to flash this one to downgrade my JB to ICS in order to come back to JB again.. Does anyone knows how to?
simpledave said:
The fastboot file i downloaded is VZW_XT907_4.0.4-7.7.1Q-144_SMQ_S1-36-10_CFC.xml.zip with size of 650 MB .. I have no idea how to flash this one to downgrade my JB to ICS in order to come back to JB again.. Does anyone knows how to?
Click to expand...
Click to collapse
jntdroid said:
AP Fastboot - from powered off, hold down volume-up AND volume-down, then while holding those, press and hold the power button until you see a menu pop-up that's simply white text on a black background. Once that comes up, use volume-down to move down to AP Fastboot, and volume-up to select it. Then plug it into your computer, fire up rsdlite (6.1.4! ), open the file linked in the OP, and go!
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Note that this will wipe everything just in case you didn't know.
Sent from my XT907 using Tapatalk 2
yeah I already backup everything.. :|.. But still doesn't know how to do with RDS and this ZIP file.. is it as simple as just plugin the phone choose the file and run ?
simpledave said:
yeah I already backup everything.. :|.. But still doesn't know how to do with RDS and this ZIP file.. is it as simple as just plugin the phone choose the file and run ?
Click to expand...
Click to collapse
Use RSD to reflash. Instructions: http://www.phonearena.com/news/How-to-restore-your-Motorola-DROID-RAZR-M-back-to-stock_id35580
Sent from my XT907 using xda app-developers app
I tried the same but receive this message (getvar) i think someone also have this problem.. I'll put some research to see what's the problem.. but does anyone also know and have this problem ?
Just edited the xml to delete the getvar line... So far so good and now I'm in ICS... GREAT... Will post the full method soon..
tadgerloks said:
Remove the line with "getvar" and remove any line with OEM or var. It should be first long line and 3rd and last, if u get errors after then remove the line with "gptmain0.bin" should be line # 2
Click to expand...
Click to collapse
Sent from my XT907 using Tapatalk 2
---------- Post added at 03:22 PM ---------- Previous post was at 03:18 PM ----------
Sorry messed up the quotes but yeah everything you need to know is under the fast boot thread in android development
Sent from my XT907 using Tapatalk 2

[Q] Galaxy S5 Stuck in Infinite Recovery Boot Cycle

I have had my S5 for two days now. I haven't done any modifications to it and have kept it completing stock. I was browsing the internet in Chrome when I got a notification saying there was a security breach and that the phone needed to restart in order to undue any changes made. So I pressed the restart button and it started to restart normally until I saw in tiny blue text "RECOVERY BOOTING....", I didn't think much of it until nothing started to happen after a minute. I let it go for another 5 minutes and then 15 minutes. I came back and still it was at the same screen. I decided to turn the device off and on to see if that would do anything, nothing happened. I took the battery out and waited a few minutes to put it back in, again nothing new. I was looking into other threads about this happening to other phones because the S5 is so new there is nothing on it doing this. But I found no useful information. So my question is, how can I fix this? I don't mind having to reset it, there's only a few apps installed. I'm tech savvy, so I'll now what you mean if you give me any tips. Thank you!
If doesn't matter if you lost the installed apps, then boot to recovery and choose wipe data reset factory and then wipe data cache.then restart your mobile it should solve your problem.
Sent from my SM-N900 using Tapatalk
ra_eng said:
If doesn't matter if you lost the installed apps, then boot to recovery and choose wipe data reset factory and then wipe data cache.then restart your mobile it should solve your problem.
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
I should have mentioned this in the post but I have tried that, nothing happens. It's already trying to boot into recovery, I wonder if I can get it out of trying to do that.
Try to boot into download mode then restart normally, maybe it gets you out of the recovery booting loop.
Sent from my SM-N900 using Tapatalk
---------- Post added at 06:19 AM ---------- Previous post was at 06:17 AM ----------
And if this didn't work.
I think you should download the stock rom from sammobile or samsung-updates.com sites and reinstall it again.
Sent from my SM-N900 using Tapatalk
ra_eng said:
Try to boot into download mode then restart normally, maybe it gets you out of the recovery booting loop.
Sent from my SM-N900 using Tapatalk
---------- Post added at 06:19 AM ---------- Previous post was at 06:17 AM ----------
And if this didn't work.
I think you should download the stock rom from sammobile or samsung-updates.com sites and reinstall it again.
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
Alright so I tried putting it into download mode and restarting it from there. I got into download mode and then restarted but nothing happened. I am going to trying reinstalling the stock rom right now. Thanks for the help!
ra_eng said:
Try to boot into download mode then restart normally, maybe it gets you out of the recovery booting loop.
Sent from my SM-N900 using Tapatalk
---------- Post added at 06:19 AM ---------- Previous post was at 06:17 AM ----------
And if this didn't work.
I think you should download the stock rom from sammobile or samsung-updates.com sites and reinstall it again.
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
So I reinstalled the stock rom and now the recovery boot text is gone, but it still doesn't actually boot up into Android. Looks like I will have to take the phone back to the store and hope I can get a replacement. Thanks for your help!
Why don't u just take it for warranty.Why use a phone which has problems
Sent From HTC One Android Revolution 62.0 KitKat 4.4.2. Sixth Sense
TechxCentral said:
So I reinstalled the stock rom and now the recovery boot text is gone, but it still doesn't actually boot up into Android. Looks like I will have to take the phone back to the store and hope I can get a replacement. Thanks for your help!
Click to expand...
Click to collapse
Does you got a replacement? I'm having the exact same problem right now
flash the firmware
Flash the firmware and bootloader and pit for partition with odin look in xda for the pit for ur device modell
---------- Post added at 04:05 PM ---------- Previous post was at 03:30 PM ----------
First install the drivers for Samsung
Did you get an answer? Am having the same issue

[Q] [Bricked] Bricked Moto X. Need help!!

Hey guys,
I was going to flash a rom when I accidentally wiped my entire system and internal storage.
Now whenever I turn on the phone it just stays at the white screen with the bootloader unlocked message from motorola.
Need help to recover my device.
If it's unlocked you're ok.. Really depending on version your still ok... Hard reset it.. Power+ Vol down.. Once off his the keys again to enter fastboot... From there use the volume keys to get back into recovery... Them sideload a ROM.
Sent from my XT1049 using xda app-developers app
---------- Post added at 05:39 AM ---------- Previous post was at 05:38 AM ----------
Wow my phone autocorrect is on overdrive tonight with fails... Let us know if this helped.
Sent from my XT1049 using xda app-developers app
realdaniel1989 said:
Hey guys,
I was going to flash a rom when I accidentally wiped my entire system and internal storage.
Now whenever I turn on the phone it just stays at the white screen with the bootloader unlocked message from motorola.
Need help to recover my device.
Click to expand...
Click to collapse
You can also flash your stock firmware with fast boot....or rsdlite. If the files are out there. Just make sure if you were on 4.4.2....you stick to 4.4 2.
Good luck!!
Closing this thread as there is a duplicate in Q&A with more info in the OP.
Reply here: http://forum.xda-developers.com/moto-x/moto-x-qa/moto-x-soft-brick-help-t2734375/post52261779
-El Daddy

[Q] Been a while, at a complete loss

I gave my X to my son last year and it became extremely slow since then. It was running a version of Liquid Smooth. I was attempting to install CM11 on it following the instructions to the T, and then it became stuck, I'm stuck. I thought it already had CWM installed on it, but when it rebooted to recovery, the factory recovery came up. I formatted the system and the cache and then tried to install TWRP, it failed. I tried 2 different date factory roms and both gave me a sideload error. I even tried to flash 2.3.4.4.5.621.no.radio.sbf.zip but it also gave me a sideload error. I guess my question is where do I go from here? There's nothing on the phone at all, all I can do is boot to recovery. The usb port is dead, we use a wall charger to charge the battery.
Strizay said:
I even tried to flash 2.3.4.4.5.621.no.radio.sbf.zip but it also gave me a sideload error. .
Click to expand...
Click to collapse
Must use RSD lite with sbf files
Sent from my XT862 using Tapatalk
---------- Post added at 12:44 PM ---------- Previous post was at 12:35 PM ----------
Strizay said:
I gave my X to my son last year and it became extremely slow since then. It was running a version of Liquid Smooth. I was attempting to install CM11 on it following the instructions to the T, and then it became stuck, I'm stuck. I thought it already had CWM installed on it, but when it rebooted to recovery, the factory recovery came up.
Click to expand...
Click to collapse
It did have cwm installed, you needed to select recovery when in rom, by long pressing power button>reboot>recovery
I formatted the system and the cache and then tried to install TWRP, it failed.
Click to expand...
Click to collapse
doesn't matter if it was stock recovery, nothing will work
I tried 2 different date factory roms and both gave me a sideload error. I even tried to flash 2.3.4.4.5.621.no.radio.sbf.zip but it also gave me a sideload error. I guess my question is where do I go from here? There's nothing on the phone at all, all I can do is boot to recovery. The usb port is dead, we use a wall charger to charge the battery.
Click to expand...
Click to collapse
if usb port is dead, phone is toast, there are no more options
---------- Post added at 12:48 PM ---------- Previous post was at 12:44 PM ----------
of course, if you haven't install moto drivers correctly, you may have misdiagnosed usb port
---------- Post added at 12:49 PM ---------- Previous post was at 12:48 PM ----------
or a bad usb cable...
so there's no way to install a recovery from inside the factory recovery?
No, there is not
Sent from my XT862 using Tapatalk
and I can't even install a stock rom either? This is so stupid.
No u
You must use RSD lite to flash stock firmware, because of locked bootloader
Sent from my XT862 using Tapatalk
---------- Post added at 01:06 PM ---------- Previous post was at 01:03 PM ----------
If installing a custom anything was possible with stock recovery, that would be the preferred way
Sent from my XT862 using Tapatalk
OK, I managed to get it connected by USB and RSD Lite sees the phone, what do I do next? LOL, sorry
Using RSD Lite to flash a .SBF to restore (Stock Rom)
on Droid X (Shadow-MB810)
Sent from my XT862 using Tapatalk
is it an sbf or a stock rom I'm trying to flash with rsd lite? How do I know which sbf is the right one? I tried to flash 3 so far 1 passed but it still said blank, the next one failed and the 3rd one says file path too long.
Strizay said:
is it an sbf or a stock rom I'm trying to flash with rsd lite?
Click to expand...
Click to collapse
an ..sbf is stock firmware
How do I know which sbf is the right one? I tried to flash 3 so far 1 passed but it still said blank,
Click to expand...
Click to collapse
if you see mem blank error try
2.3.4.4.5.621.no.radio.sbf.zip or FF-p3a_shadow_cdma_shadow-user-2.3.4-4.5.1_57_DX8-51-120111-test-keys-signed-Verizon-US.sbf.zip
the next one failed and the 3rd one says file path too long.
Click to expand...
Click to collapse
usually that means rsd lite and/sbf is buried in too many folders, try placing sbf on desktop
if it ends in .sbf.zip or .sbf it's ok if any thing else needs to be uncompressed manually
and verify md5 checksums
I flashed the 605 sbf and it went through all of it and then at the end it said passed. the screen was blank but the led in the top left corner was green. I unplugged the phone and it went back to bootloader with the blank message. I'm flashing the one you mentioned above right now.
sweet, that one worked. Now to see if I can get the OTA update.
Strizay said:
I flashed the 605 sbf and it went through all of it and then at the end it said passed. the screen was blank but the led in the top left corner was green. I unplugged the phone and it went back to bootloader with the blank message. I'm flashing the one you mentioned above right now.
sweet, that one worked. Now to see if I can get the OTA update.
Click to expand...
Click to collapse
Why would you want the update?
Sent from my XT862 using Tapatalk
---------- Post added at 02:56 PM ---------- Previous post was at 02:51 PM ----------
Though you wanted a custom rom?
You are just adding extra steps
you're right, I just wanted to install a custom rom. I've managed to get it rooted and cwm installed now, it's just that once I'm in cwm, there's no way to select the command I want. the volume buttons move the selection, but none of the buttons make it respond. it just takes away the text and shows the back ground image.
Strizay said:
you're right, I just wanted to install a custom rom. I've managed to get it rooted and cwm installed now, it's just that once I'm in cwm, there's no way to select the command I want. the volume buttons move the selection, but none of the buttons make it respond. it just takes away the text and shows the back ground image.
Click to expand...
Click to collapse
[HOW TO] Install/Use Droid 2/X/3 Bootstrap
---------- Post added at 03:05 PM ---------- Previous post was at 03:04 PM ----------
in CWM scroll with volume buttons, select with camera button
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
I'm sure I covered this in my
[Video] Installing CM11 on the Motorola Droid X (MB810)
thank you so much man, I totally forgot that it was the camera button. Everything is running great now, and I now have Kit Kat on my X. Your help is Extremely appreciated, thank you for all your help and time.

Categories

Resources