Related
i tried to sbf from gingerbread back to froyo using rsd lite and nw my phones stuck on the m logo, i dont know what to do i been readin through the forums but i cant seem to find anything that works please someone help me!!!
chip0 said:
i tried to sbf from gingerbread back to froyo using rsd lite and nw my phones stuck on the m logo, i dont know what to do i been readin through the forums but i cant seem to find anything that works please someone help me!!!
Click to expand...
Click to collapse
Did you do the full sbf?
Sent from my DROIDX using XDA App
ya i did the full sbf, SHADO_X6_2.3.34_SYSTEM-ONLY.sbf thats the file i downloaded...
chip0 said:
ya i did the full sbf, SHADO_X6_2.3.34_SYSTEM-ONLY.sbf thats the file i downloaded...
Click to expand...
Click to collapse
thats not the full one. thats the system only one. use full one here http://www.mydroidworld.com/forums/droid-x-discussion/6367-new-full-sbf-droid-x-2-3-340-a.html
dont forget to do a factory reset after doing the sbf
it said failed flashing process error sending ram download for bootloader
chip0 said:
it said failed flashing process error sending ram download for bootloader
Click to expand...
Click to collapse
Now do the system only and you should be good
Sent from my DROIDX using XDA App
it said the same thing, it faild, n it said error getting subscriber info
chip0 said:
it said the same thing, it faild, n it said error getting subscriber info
Click to expand...
Click to collapse
That's weird...I usually do the Full Sbf then the system only because the Full fails....can you get into recovery?
Sent from my DROIDX using XDA App
u mean by pressing the power button n the menu button? cuz when i do that it just shows a android guy n a exclamation mark inside a triangle. im not sure but i think it keeps failing because my battery is low so im charging it n im going to try again in a lil bit should i do the full first again then the system only? n if u have any other ideas let me know lol...looks like its gunna be a LONG night for me hahaha
chip0 said:
u mean by pressing the power button n the menu button? cuz when i do that it just shows a android guy n a exclamation mark inside a triangle. im not sure but i think it keeps failing because my battery is low so im charging it n im going to try again in a lil bit should i do the full first again then the system only? n if u have any other ideas let me know lol...looks like its gunna be a LONG night for me hahaha
Click to expand...
Click to collapse
Ya and press the search button. Wipe data/factory reset and see what happens
Sent from my DROIDX using XDA App
now i cant even do that, no matter what i press it takes me to the boot loader
Flash the full again. If it fails, pop out the battery and flash the full again. It may tell you code corrupt, but it will allow you to flash it. It may also take 2-3 tries. I had the same issue flashing back, but it will take
Sent from my DROIDX using XDA Premium App
ok, doing it again as we speak lol
dude, THANK YOU! seriously u saved my life...can i buy u a beer? lol
No worries,its happened to me a few times. Just glad I could help
Sent from my DROIDX using XDA Premium App
how do you get pass the activate screen? Im not using vzw and i need to root the phone.
undertai said:
how do you get pass the activate screen? Im not using vzw and i need to root the phone.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=L5XjF6sPef4
this seems to be the same issue I'm having.. i just updated to GB yesterday and rooted my phone.. i am super novist at this so i have had a few issues the last couple days but anyway, my bootloader say 30.04 so i grabbed the SHADO_X6_2.3.34_SYSTEM-ONLY.sbf tried to flash using RSD lite and then my phone now shows the Red "M" logo... I'm kinda worried i downloaded the "Happy Holidays".sbf hoping that would work instead but RSD lite doesn't even allow me to start with that program.. so i saw earlier on this thread there was a different file to use.. i'm downloading that now but ultimately i would really like to get the Miui Rom working.. well actually ANY rom would be cool if someone see's this before i try to flash that file let me know otherwise I'll just re post my results.
---------- Post added at 06:22 PM ---------- Previous post was at 05:58 PM ----------
so now im super confused... both the holiday sbf and the one listed earlier wont even work in RSD lite.... and i'm still stuck at the Red M logo... what am i doing wrong?
Rhill051 said:
this seems to be the same issue I'm having.. i just updated to GB yesterday and rooted my phone.. i am super novist at this so i have had a few issues the last couple days but anyway, my bootloader say 30.04 so i grabbed the SHADO_X6_2.3.34_SYSTEM-ONLY.sbf tried to flash using RSD lite and then my phone now shows the Red "M" logo... I'm kinda worried i downloaded the "Happy Holidays".sbf hoping that would work instead but RSD lite doesn't even allow me to start with that program.. so i saw earlier on this thread there was a different file to use.. i'm downloading that now but ultimately i would really like to get the Miui Rom working.. well actually ANY rom would be cool if someone see's this before i try to flash that file let me know otherwise I'll just re post my results.
---------- Post added at 06:22 PM ---------- Previous post was at 05:58 PM ----------
so now im super confused... both the holiday sbf and the one listed earlier wont even work in RSD lite.... and i'm still stuck at the Red M logo... what am i doing wrong?
Click to expand...
Click to collapse
follow this guide http://rootzwiki.com/showthread.php?399-UPDATED-GUIDE-LINKS-DX-SBF-s
I followed your advice to the website and from there i found this link http://www.droidxforums.com/forum/droid-x-sbf/23638-linux-solution-your-windows-rsd-lite-problems.html It is a walk through on how to boot using linux and flashing your phone, it worked like a charm even after a few other attempts at using RSD lite that was the only method that worked i would highly recommend someone to use this method
hi all i just flashed nightly cm9 and my tab went nuts ...it auto shutdown when i disconnect the charger ( the batetry is 68 % ) so i flashed back to stock and now it is in a bootloop , i tried going into download mode but after flashing and all that still it bootloops ..even in flashing in cwm brings no good ....so any help ??
How do you restock.
Overcome GB stock safe v5 using Odin with pit file and repartition selected?
Sent from my GT-I9300 using xda app-developers app
tohno said:
hi all i just flashed nightly cm9 and my tab went nuts ...it auto shutdown when i disconnect the charger ( the batetry is 68 % ) so i flashed back to stock and now it is in a bootloop , i tried going into download mode but after flashing and all that still it bootloops ..even in flashing in cwm brings no good ....so any help ??
Click to expand...
Click to collapse
No, your not "bricked". If you can get into download or recovery your fine, a bootloop just means you screwed something up and didnt flash correctly or correct roim maybe.
Start over, restock using overcome guide/pack, then flash the correct cm9 via recovery for your model/variant.
wifi
after installing cm10 my wifi doesn't work.
how can i fix it?
---------- Post added at 08:54 PM ---------- Previous post was at 08:42 PM ----------
and other problem i can't post on cm10 post.
king-heart said:
after installing cm10 my wifi doesn't work.
How can i fix it?
---------- post added at 08:54 pm ---------- previous post was at 08:42 pm ----------
and other problem i can't post on cm10 post.
Click to expand...
Click to collapse
the wifi is working..........got to advanced menu in wifi and uncheck the temporary avoiding wifi option...might help
No way to avoid stock when "only" CWM recovery is "gone"
Hi all,
the last CW-9 nightly update finally did it... boot loop and CWM recovery can not be selected any more (Vol UP and Power). Download mode (Vol DOWN and Power) works, but I would really hate to restock, because my only nandroid backup and Titanium backups are on the internal SD and that would get formatted in the process.
I looked around for other phones and it seems as if they can simply load an image of CWM 6.xxx via ODIN (I tried fastboot but that did not find my device at all).
I could not find any CWM V6 image as a .tar file anywhere. Anyony have a link?
Does anyone know a simple and fast way to get back my nandroid state WITHOUT restock?
Thanks
rgbigel said:
Hi all,
the last CW-9 nightly update finally did it... boot loop and CWM recovery can not be selected any more (Vol UP and Power). Download mode (Vol DOWN and Power) works, but I would really hate to restock, because my only nandroid backup and Titanium backups are on the internal SD and that would get formatted in the process.
I looked around for other phones and it seems as if they can simply load an image of CWM 6.xxx via ODIN (I tried fastboot but that did not find my device at all).
I could not find any CWM V6 image as a .tar file anywhere. Anyony have a link?
Does anyone know a simple and fast way to get back my nandroid state WITHOUT restock?
Thanks
Click to expand...
Click to collapse
Our tab has no fastboot
Anyway
Read this
http://forum.xda-developers.com/showthread.php?t=1831804
Sent from my GT-P1000 using xda app-developers app
priyana said:
Our tab has no fastboot
Anyway
Read this
http://forum.xda-developers.com/showthread.php?t=1831804
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Thanks pressed for that! At least now I know why fastboot did not work...
Still, does anyone know if I can fix the boot image with Odin ... or Heimdal or whatever?
Did yu read it or not?
The guy has your exact problem and solved.
But since you ask again.
extract the boot.img from good package and
heimdall flash --kernel ./boot.img --recovery ./boot.img
Sent from my GT-P1000 using xda app-developers app
priyana said:
Did yu read it or not?
The guy has your exact problem and solved.
But since you ask again.
extract the boot.img from good package and
heimdall flash --kernel ./boot.img --recovery ./boot.img
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yesss Sir, I did read. But maybe you sent the wrong link, because your "answer" (not his) points a an open question. Or how do you read his last sentence "does anybody know how I can go about doing this?" -- As to the heimdall solution, I tried that, only to find that it was unable to write to my internal SD. So, i guess the partition scheme got messed up :crying::crying::crying:
Anyway, I gave up (this time) and restocked. Back to my last accessible data backup from May...:crying:
Should somebody still find a "real" answer, please do respond. Even if the answer should be a clear "it can't be done", so be it. Or ask St. :angel: CDESAI to please please make "our" version of CW Reboot.
I sent you the right link for those who messed up their kernel .
If your partition gone bad then no wonder it won't work.
Now you have restocked, you can always start from scratch.
Sent from my GT-P1000 using xda app-developers app
Fixed
tohno said:
Fixed
Click to expand...
Click to collapse
Hi,
Not addressed to you, Sir!
Someone else who posted on your thread
Hey!
So i've just received the update, and as per instructions i rebooted to install the update. But after rebooting, clockwork recovery appeared with the options of NO, NO, NO, etc, Yes install unknown ZIP, NO, etc. Because i was doing two other things at the moment (and i'm a moron) i've clicked Cancel and rebooted.
So now i'm still on 4.2.2 and when i click on "Check for system update" in setup it says "Up to date"
Am i totally screwed with the OTA update? I'll punch myself in the face if i have to do the update manually and resetup everything on my device <.<''
Thanks!
No, you're not boned. Try this.
http://www.droid-life.com/2013/07/25/android-4-3-update/
Rirere said:
No, you're not boned. Try this.
Click to expand...
Click to collapse
With the file from my /cache folder CWM gives Status 7 - Installation aborted. (i've moved the file to my "SD card")
As far as i saw, that might pop up if the ROM is not well done, but that is the file that i got from Google
So... any ideas how shall i proceed?
Sound Anarchist said:
Hey!
So i've just received the update, and as per instructions i rebooted to install the update. But after rebooting, clockwork recovery appeared with the options of NO, NO, NO, etc, Yes install unknown ZIP, NO, etc. Because i was doing two other things at the moment (and i'm a moron) i've clicked Cancel and rebooted.
So now i'm still on 4.2.2 and when i click on "Check for system update" in setup it says "Up to date"
Am i totally screwed with the OTA update? I'll punch myself in the face if i have to do the update manually and resetup everything on my device <.<''
Thanks!
Click to expand...
Click to collapse
If you don't want to do a manual update, you can either wait it out - the OTA will come back again eventually - or, you can take a look at system/cache and see the 4.3 update.zip, move it over to your root folder, then go into CWM recovery and install that.
mlj11 said:
If you don't want to do a manual update, you can either wait it out - the OTA will come back again eventually - or, you can take a look at system/cache and see the 4.3 update.zip, move it over to your root folder, then go into CWM recovery and install that.
Click to expand...
Click to collapse
Yep, did that Now i have another issue - see post above yours.
Hi, i'm having the same problem (kinda)
i am on stock rom, twrp recovery + multirom , timur's kernel.
i got the ota, said install, went to twrp, installed, but nothing happened. Now i am on 4.2.2, system says up to date.
i cant find update.zip anywhere.
can u help me?
Sent from my Nexus 7 using XDA Premium HD app
hamid_valad said:
Hi, i'm having the same problem (kinda)
i am on stock rom, twrp recovery + multirom , timur's kernel.
i got the ota, said install, went to twrp, installed, but nothing happened. Now i am on 4.2.2, system says up to date.
i cant find update.zip anywhere.
can u help me?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I think it's because you are not using stock kernel. As far as i've gathered from reading here, there is no trouble with custom recovery in general (it seems that sometimes there are issues - mine for example), but otherwise you should be stock: Google's ROM + kernel. If i was in your situation, i would flash the original kernel (you can extract it from the 4.2.2 release image). I'm not sure about multirom, you should research that.
As for my issue, after sleeping on it i think that i'll just wipe and flash the whole 4.3 image. After that i'll setup everything again.
Turns out, that the applications i need to backup data from are not so much, and i figured out where they keep the data i'm interested in. Also i want to see if wiping will help my memory issues (almost full device = slow as hell device).
hamid_valad said:
Hi, i'm having the same problem (kinda)
i am on stock rom, twrp recovery + multirom , timur's kernel.
i got the ota, said install, went to twrp, installed, but nothing happened. Now i am on 4.2.2, system says up to date.
i cant find update.zip anywhere.
can u help me?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Me too,but i'm using stock kernel...
Sent from my Sony Xperia™ sola using XDA Premium
I got error when flashing...
Anyone please help...
Sent from my Sony Xperia™ sola using XDA Premium
Ben Ling said:
I got error when flashing...
Anyone please help...
Sent from my Sony Xperia™ sola using XDA Premium
Click to expand...
Click to collapse
Yup, thats like mine.
mine says xt9ime.apk missing, and the numbers are different!
Sent from my Nexus 7 using XDA Premium HD app
Ben Ling said:
I got error when flashing...
Anyone please help...
Sent from my Sony Xperia™ sola using XDA Premium
Click to expand...
Click to collapse
i found a way, trying right now!!! if it works, i'll let u know!
Edit 1: Failed
Edit 2: Use it, maybe it helps u
BACK UP FIRST!!!!! I DO NOT TAKE ANY RESPONSIBILITY, my device got into X mark, nothing happened.
open the zip file, go to META-INF--> com --> google --> android, copy the updater-script to your desktop, then delete it from the zip archive
open the file on your desktop with notepad
search for "systemui" or what ever your problem is
delete the whole line. starting with "set_progress" ending with "));"
in my situation it was:
"set_progress(0.448070);
assert(apply_patch_check("/system/app/SystemUI.apk", "cca620c865fb91868a3afc70f005c93dc44beb60", "3c7b5c2e77cd9296276f9e7c372f298d1913644a"));"
then search again and you will find another like bellow:
"set_progress(0.451753);
assert(apply_patch_check("/system/app/SystemUI.odex", "7ad50dd5929e3d681f4d11199fe852c1ad620ad5", "1a424ccaa5cd08e82feec972649b42aec4b8a512"));"
then again:
"set_progress(0.481089);
apply_patch("/system/app/SystemUI.apk", "-",
cca620c865fb91868a3afc70f005c93dc44beb60, 1471663,
3c7b5c2e77cd9296276f9e7c372f298d1913644a, package_extract_file("patch/system/app/SystemUI.apk.p"));"
and the last one:
"set_progress(0.484752);
apply_patch("/system/app/SystemUI.odex", "-",
7ad50dd5929e3d681f4d11199fe852c1ad620ad5, 503088,
1a424ccaa5cd08e82feec972649b42aec4b8a512, package_extract_file("patch/system/app/SystemUI.odex.p"));"
save and copy the new file to the previous location.
then install the new file.
hope it helps.
let me know if it worked.
hamid_valad said:
i found a way, trying right now!!! if it works, i'll let u know!
Edit 1: Failed
Edit 2: Use it, maybe it helps u
BACK UP FIRST!!!!! I DO NOT TAKE ANY RESPONSIBILITY, my device got into X mark, nothing happened.
open the zip file, go to META-INF--> com --> google --> android, copy the updater-script to your desktop, then delete it from the zip archive
open the file on your desktop with notepad
search for "systemui" or what ever your problem is
delete the whole line. starting with "set_progress" ending with "));"
in my situation it was:
"set_progress(0.448070);
assert(apply_patch_check("/system/app/SystemUI.apk", "cca620c865fb91868a3afc70f005c93dc44beb60", "3c7b5c2e77cd9296276f9e7c372f298d1913644a"));"
then search again and you will find another like bellow:
"set_progress(0.451753);
assert(apply_patch_check("/system/app/SystemUI.odex", "7ad50dd5929e3d681f4d11199fe852c1ad620ad5", "1a424ccaa5cd08e82feec972649b42aec4b8a512"));"
then again:
"set_progress(0.481089);
apply_patch("/system/app/SystemUI.apk", "-",
cca620c865fb91868a3afc70f005c93dc44beb60, 1471663,
3c7b5c2e77cd9296276f9e7c372f298d1913644a, package_extract_file("patch/system/app/SystemUI.apk.p"));"
and the last one:
"set_progress(0.484752);
apply_patch("/system/app/SystemUI.odex", "-",
7ad50dd5929e3d681f4d11199fe852c1ad620ad5, 503088,
1a424ccaa5cd08e82feec972649b42aec4b8a512, package_extract_file("patch/system/app/SystemUI.odex.p"));"
save and copy the new file to the previous location.
then install the new file.
hope it helps.
let me know if it worked.
Click to expand...
Click to collapse
ok,i'll try...but why do i need to change to apk.p?
---------- Post added at 12:41 PM ---------- Previous post was at 12:10 PM ----------
Can anyone provide me system/bin/app_process from Nexus 7 3G?
Sound Anarchist said:
Yep, did that Now i have another issue - see post above yours.
Click to expand...
Click to collapse
Hey,
Sorry saw that you did a clean re-install already.
I had the same problem as you. What I did was to flash TWRP (unlike CWM it allows you to ignore the verification error) and tried to take the update again. That still failed however, because I apparently had an edited debuggerd file (happens if you use the Stickmount app). I downloaded a stock one from this thread, replaced it in system/bin, and re-flashed 4.3. Finally worked.
I then re-rooted by flashing the latest SuperSU in TWRP.
Are you replacing the 'debuggerd' file within the 4.3 zip update? Or the file on the Nexus 7 before the 4.3 is flashed?
I've tried updating 4.3 using the OTA 4.3 zip & TWRP & my nexus 7 is currenly stuck the the 'X' boot logo.
hamid_valad said:
i found a way, trying right now!!! if it works, i'll let u know!
Edit 1: Failed
Edit 2: Use it, maybe it helps u
BACK UP FIRST!!!!! I DO NOT TAKE ANY RESPONSIBILITY, my device got into X mark, nothing happened.
open the zip file, go to META-INF--> com --> google --> android, copy the updater-script to your desktop, then delete it from the zip archive
open the file on your desktop with notepad
search for "systemui" or what ever your problem is
delete the whole line. starting with "set_progress" ending with "));"
in my situation it was:
"set_progress(0.448070);
assert(apply_patch_check("/system/app/SystemUI.apk", "cca620c865fb91868a3afc70f005c93dc44beb60", "3c7b5c2e77cd9296276f9e7c372f298d1913644a"));"
then search again and you will find another like bellow:
"set_progress(0.451753);
assert(apply_patch_check("/system/app/SystemUI.odex", "7ad50dd5929e3d681f4d11199fe852c1ad620ad5", "1a424ccaa5cd08e82feec972649b42aec4b8a512"));"
then again:
"set_progress(0.481089);
apply_patch("/system/app/SystemUI.apk", "-",
cca620c865fb91868a3afc70f005c93dc44beb60, 1471663,
3c7b5c2e77cd9296276f9e7c372f298d1913644a, package_extract_file("patch/system/app/SystemUI.apk.p"));"
and the last one:
"set_progress(0.484752);
apply_patch("/system/app/SystemUI.odex", "-",
7ad50dd5929e3d681f4d11199fe852c1ad620ad5, 503088,
1a424ccaa5cd08e82feec972649b42aec4b8a512, package_extract_file("patch/system/app/SystemUI.odex.p"));"
save and copy the new file to the previous location.
then install the new file.
hope it helps.
let me know if it worked.
Click to expand...
Click to collapse
Hmm ... you are preventing the update of the SystemUI.apk? Even if your modification will work, you will have a 4.3 base system with a 4.2.2 SystemUI running ...
AndDiSa said:
Hmm ... you are preventing the update of the SystemUI.apk? Even if your modification will work, you will have a 4.3 base system with a 4.2.2 SystemUI running ...
Click to expand...
Click to collapse
Yup. Also u can just delete the verification part!
Sent from my Nexus 7 using XDA Premium HD app
That's clear for me, but you are not only deleting the verification part, but the update for the SystemUI.apk, too ...
Sent from my Nexus 7 using xda app-developers app
cmberry20 said:
Are you replacing the 'debuggerd' file within the 4.3 zip update? Or the file on the Nexus 7 before the 4.3 is flashed?
I've tried updating 4.3 using the OTA 4.3 zip & TWRP & my nexus 7 is currenly stuck the the 'X' boot logo.
Click to expand...
Click to collapse
I replaced the file on the Nexus 7 (in system/bin) before flashing 4.3.
Ever since CM10.2 came out I've not been able to get it to work. Everytime I flashed the rom it would work on the first boot, then after a reboot it would hang at the boot logo. CM11 did exactly the same thing. No amount of wiping this or flashing that fixed the problem. I've seen many other people with the same symptoms posting on this forum and others and most of them use the same solution I did: revert to CM10.1 or similar.
Today I solved my problem. The solution that worked for me was to use the TWRP 2.6.3.0 from Dhacker29 (twrp263_xt907.img), flash that to recovery then install the zips from there. I can't post a link because of forum restrictions but put androidhosting.org/Devs/Dhacker29/msm8960/ infront of that file name and you'll be there.
It sounds really simple and I've seen people say "just use TWRP 2.6.3.0 and it will work", but not all TWRP 2.6.3.0 images are the same apparently. I was using TWRP 2.6.3.0 before and it never worked. I tried downloading it from multiple sources and it still didn't work. Dhacker29's version is slightly different and worked perfectly. I don't know why my phone was picky about it and most other people don't have a problem, but I know I'm not the only one and I just wanted to share the solution.
Here is Dhackers flashable. I did not know there was a difference but the md5 is different from my regular one : e33eac18b87c826155f383169b3a17a4
For the recovery.img inside. twrp263_xt907.img.
My other twrp 263, not sure of the source, but I think mattlgroff :
Md5 : 791c142be27a541ea36b9fc97c684a50
The 791' is the one I suspect of bad behaviour.
I am not rooted or anything
So my problem is when I turn on the device it will just hang up on the animated boot of the red eye. I can enter the stock recovery without any problems and can get to fastboot. The fastboot screen says its locked. So I have tried rsdlite and VRZ_XT907_9.8.1Q-94-1_CFC.img to flash the stock rom on it. rsdlite says that it finished but the phone just remains on the red eye boot animation. can anyone give me some help.
thanks in advance.
again not rooted or custom mod, can fully boot, fastboot locked.
cokekid76 said:
So my problem is when I turn on the device it will just hang up on the animated boot of the red eye. I can enter the stock recovery without any problems and can get to fastboot. The fastboot screen says its locked. So I have tried rsdlite and VRZ_XT907_9.8.1Q-94-1_CFC.img to flash the stock rom on it. rsdlite says that it finished but the phone just remains on the red eye boot animation. can anyone give me some help.
thanks in advance.
again not rooted or custom mod, can fully boot, fastboot locked.
Click to expand...
Click to collapse
You should wipe data before you restore.
For now boot recovery, push both vol keys for 3 sec @ the dead robot, wipe data.
Ok just did this and it is still stuck at the red eye. The screen isnt frozen it is sparking and stuff but it won't leave this and finish booting. Help!
Sent from my SAMSUNG-SGH-I317 using Tapatalk
cokekid76 said:
Ok just did this and it is still stuck at the red eye. The screen isnt frozen it is sparking and stuff but it won't leave this and finish booting. Help!
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Wipe data again, go direct to fastboot & rsd....
Be sure to verify the md5.
http://forum.xda-developers.com/showpost.php?p=48380933&postcount=2
1st why is there 2 files and what order did they need to be done.
aviwdoowks said:
Wipe data again, go direct to fastboot & rsd....
Be sure to verify the md5.
http://forum.xda-developers.com/showpost.php?p=48380933&postcount=2
Click to expand...
Click to collapse
2nd they both passed md5. then I put the vrz_xt907_9.8.1q-94_cfc.xml.zip through rsd and it failed. So I ran the other one, vrz_xt907_9.8.1q-78-1_1ff.orig.xml.zip, and rsd completed. But it still gets hung up on reboot and wont go pass the red eye. even after waiting 5min for it to boot. rsd is now telling me to manually reboot the device. So I did and waited another 5mins and still stuck at red eye. what is the other file that rsd failed on for. And what am I doing wrong here.
cokekid76 said:
2nd they both passed md5. then I put the vrz_xt907_9.8.1q-94_cfc.xml.zip through rsd and it failed. So I ran the other one, vrz_xt907_9.8.1q-78-1_1ff.orig.xml.zip, and rsd completed. But it still gets hung up on reboot and wont go pass the red eye. even after waiting 5min for it to boot. rsd is now telling me to manually reboot the device. So I did and waited another 5mins and still stuck at red eye. what is the other file that rsd failed on for. And what am I doing wrong here.
Click to expand...
Click to collapse
the xml must selected from the unzipped folder & use rsd 615
---------- Post added at 01:36 PM ---------- Previous post was at 01:34 PM ----------
Did rsd count out all it's partition writes? 1 to 23 or so?
Rsd did 1-17.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
cokekid76 said:
Rsd did 1-17.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
So what does 17 say? It must have failed cause it goes to 20 something
---------- Post added at 03:19 PM ---------- Previous post was at 02:47 PM ----------
22 for stock w/ getvar & erase user data, I think.
15 was system 16 is wipe cashe 17 is wipe data or reverse the last 2
Sent from my KFOT using Tapatalk
cokekid76 said:
15 was system 16 is wipe cashe 17 is wipe data or reverse the last 2
Sent from my KFOT using Tapatalk
Click to expand...
Click to collapse
So no errors?
I am stumped. Post a SS of your rsd screen. Make sure you try a boot with the usb plug removed.
---------- Post added at 03:38 PM ---------- Previous post was at 03:36 PM ----------
You are missing some steps zip up the xml & up it right here. Just the xml ~ 1kb.
---------- Post added at 03:45 PM ---------- Previous post was at 03:38 PM ----------
Just as well to paste the text of the xml to a post.
---------- Post added at 03:48 PM ---------- Previous post was at 03:45 PM ----------
Where did you get the xml?
I'll try to get the info for you guys tomorrow
Sent from my SAMSUNG-SGH-I317 using Tapatalk
The same problem!!
My phone is stucked on the red ball and I don't urderstand anything u guys are saying. Could please in human language?
Thanks in advance!
matitor said:
My phone is stucked on the red ball and I don't urderstand anything u guys are saying. Could please in human language?
Thanks in advance!
Click to expand...
Click to collapse
Xml is the fxz, restore .zip.
That zip needs to be extracted to a "work" folder. Install the latest moto drivers from the moto site. On a mac use parallels desktop.
Run rsd lite 615 & choose the .xml file from the rsd ... button.
Use the latest fxz/xml.zip - ...94 which will lock your boot if you come from ...66 or earlier if you are not unlocked beforehand!
If on ...78 or earlier remove the getvar line from the xml commands.
aviwdoowks said:
Xml is the fxz, restore .zip.
That zip needs to be extracted to a "work" folder. Install the latest moto drivers from the moto site. On a mac use parallels desktop.
Run rsd lite 615 & choose the .xml file from the rsd ... button.
Use the latest fxz/xml.zip - ...94 which will lock your boot if you come from ...66 or earlier if you are not unlocked beforehand!
If on ...78 or earlier remove the getvar line from the xml commands.
Click to expand...
Click to collapse
I got this message...phone returned fail.. see the image attach
matitor said:
I got this message...phone returned fail.. see the image attach
Click to expand...
Click to collapse
Please do not even post with out phone sw build & boot lock status
Meow meow ...bark bark bark ... What does the fox say..... Sorry couldn't help it
Sent from my XT907 using xda app-developers app
ezknives said:
Meow meow ...bark bark bark ... What does the fox say..... Sorry couldn't help it
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
What do you mean?
Human language
Sent from my XT907 using xda app-developers app
i cant unbrick my droid razr m its in a bootloop and ive tried installing different roms to be sure it isnt the rom and i tried wiping the cache dalvik and data but no matter what i do it wont get ot of the loop please help im using twrp and version 4.4.2
Dr3loc said:
i cant unbrick my droid razr m its in a bootloop and ive tried installing different roms to be sure it isnt the rom and i tried wiping the cache dalvik and data but no matter what i do it wont get ot of the loop please help im using twrp and version 4.4.2
Click to expand...
Click to collapse
Well for starters, if you're on 4.4.2, are you sure you've been flashing the correct ROMs for the new bootloader? Right now only a very few ROMs support it, namely the cm11 test builds, gummy ROM, and...maybe the really long named one that's basically stock but pared down. If you have in fact tried all of those, have you tried restoring your stock backup, which I'm assuming you made because rule 1 is always make a backup?
You flashed a ROM which is not compatible with the new bootloader. A new thread won't help you. Take RSD Lite and flash the stock KitKat. Then the phone should boot again.
I am having the same problem with my xt907. It will boot and loop on the bootloader. I also can not get to the recovery. Rsd isn't working. Matt's utility isn't working. It sounds like a soft brick but I could be wrong.
H0LT3R said:
I am having the same problem with my xt907. It will boot and loop on the bootloader. I also can not get to the recovery. Rsd isn't working. Matt's utility isn't working. It sounds like a soft brick but I could be wrong.
Click to expand...
Click to collapse
What system version were you on? What did you do to cause it? What did you flash in rsd? Is your boot loader unlocked?
Sent from my XT907 using XDA Premium 4 mobile app
ezknives said:
What system version were you on? What did you do to cause it? What did you flash in rsd? Is your boot loader unlocked?
Sent from my XT907 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Bootloader is unlocked.
I believe it was 4.1.2, but i was on cm11 to long to remember what firmware I was on exactly.
I tried to flash stock back in rsd and thats when all hell broke loose.
Did you try the 4.4.2 or a different one? What is it saying in rsd where does it fail? You say it isn't working can you elaborate?
Sent from my XT907 using XDA Premium 4 mobile app
I tried both, 4.1.2 and 4.4.2. Error was the get var code. I even deleted the lines and tried again. At one point I did get to system.img and then failed. All it does is boot and is stuck on the warning unlocked bootloader label.
Still didn't provide much detail... But try removing this line
Code:
<step operation="getvar" var="max-download-size" />
and try the basics OEM USB cable a different cable use a USB 2.0. port try a different port ensure there is enough free space for the program to run...
Sent from my XT907 using XDA Premium 4 mobile app
ezknives said:
Still didn't provide much detail... But try removing this line
Code:
<step operation="getvar" var="max-download-size" />
and try the basics OEM USB cable a different cable use a USB 2.0. port try a different port ensure there is enough free space for the program to run...
Sent from my XT907 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There is plenty of hard drive space, is there specific it should be ran. I'm not really sure how the program functions behind the curtain. I will also use a new cord.
Just want to thank you for the patience and help so far. This the first time I haven't ever been able to bring a phone back to life. Lol
---------- Post added at 04:13 PM ---------- Previous post was at 03:20 PM ----------
ezknives said:
Still didn't provide much detail... But try removing this line
Code:
<step operation="getvar" var="max-download-size" />
and try the basics OEM USB cable a different cable use a USB 2.0. port try a different port ensure there is enough free space for the program to run...
Sent from my XT907 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Also do I need to zip the file back after editing the lines in the XML file? I've done it both ways before but just wanting some clarity.
No, you don't have to. Just select your edited XML file in RSD Lite.
lem22 said:
No, you don't have to. Just select your edited XML file in RSD Lite.
Click to expand...
Click to collapse
I've given up, just went and bought the prepaid moto g on Verizon, waiting for the boot loader to be unlocked.
Just want to thank for the help anyways.
Try Droid razr m utility if your on 4.1.2
Or house of moto.
House of moto works but is tricky to work.
I can email you a copy [email protected]
Sent from my XT907 using XDA Free mobile app
S_transform said:
Well for starters, if you're on 4.4.2, are you sure you've been flashing the correct ROMs for the new bootloader? Right now only a very few ROMs support it, namely the cm11 test builds, gummy ROM, and...maybe the really long named one that's basically stock but pared down. If you have in fact tried all of those, have you tried restoring your stock backup, which I'm assuming you made because rule 1 is always make a backup?
Click to expand...
Click to collapse
i tried to flash cm11 rom but it gives me error status 7 installation aborted
i also perform a backup but now its giving me MD5 mismatch sum
what should i do?
Coolbilal said:
i tried to flash cm11 rom but it gives me error status 7 installation aborted
i also perform a backup but now its giving me MD5 mismatch sum
what should i do?
Click to expand...
Click to collapse
Turn off the MD5 verification option in your recovery.
Sent from your Mom's M8
RikRong said:
Turn off the MD5 verification option in your recovery.
Sent from your Mom's M8
Click to expand...
Click to collapse
how can i turn off MD5 verification
---------- Post added at 09:51 AM ---------- Previous post was at 09:47 AM ----------
Coolbilal said:
how can i turn off MD5 verification
Click to expand...
Click to collapse
thanks for your help guyz now phone is working well
special thanks to matts utility i modify it and install kitkat in it again