Sch -1535 problems after safestrap. - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

Ok so I have the Verizon Samsung Galaxy s 3 with 4.3 (out of warranty). I used saferoot then safestrap. After a failed attempt to install a custom Rom. I can not restore to the backup I made in safestrap. I did get the phone to reboot though download mode, but no I have no wifi terrible battery life and phone get hot no matter what I'm doing and don't think I'm rooted anymore.
My question is what should I do now? I would like to just go back to the junk stock version if possible. Or if there is another solution I'm all ears!

You are in the Verizon NOTE 3 forum.. if u want to return to stock u have to download the stock tar file and flash it in odin.. maybe u messed up with the phone, but because you put sch i535 I'm guessing that u do have an s3..you will have to go to that forum. If not here is the op with the stock files..
http://forum.xda-developers.com/showthread.php?t=2524572

Related

curious about a few things

So I'm kinda a newbie to flashing ROMs I just got a galaxy s4 back in November and the official kit kat update killed my expirence with the s4 so I got a refurbished s4 with mk2 baseband and from what I've read the bootloader was locked. I'm on sprint but I've been flashing away like no tomorrow and yes I've been making nandroid backups and everything incase something goes wrong. (I've soft bricked my phone 4 times) but I'm just curious on how to get back to my stock mk2 rom? I've tried restoring my backup from twrp and can't get it to boot it just get stuck in a bootloop. Any help would be really nice.
how to get back to my stock mk2 rom?
Click to expand...
Click to collapse
Use the MK2 tar found in these forums.
leaderbuilder said:
Use the MK2 tar found in these forums.
Click to expand...
Click to collapse
Thing is I only have access to my phone. I don't have a PC I use my phone and my gfs phone to do stuff. Is there anyway to download a flashable zip and install through twrp
poopet22 said:
Thing is I only have access to my phone. I don't have a PC I use my phone and my gfs phone to do stuff. Is there anyway to download a flashable zip and install through twrp
Click to expand...
Click to collapse
If you REALLY want a complete wiped stock phone you'll need a PC (or Mac if you use Heimdall).
If you want to try something (with NO garuantees that'll work and not brick your phone!) you can try Mobile Odin Pro. It'll flash .tars BUT it will not flash the modem. And, like I said it may not work or worse.
So...
Find a PC, download PC Odin 3.07 (or 3.09), Downlaod the tar. Run Odin as administrator and then flash phone. DONE.

[Q] may have bricked my nc1

Ok so I had a nc1.. used towel root,rf, and safe strap.made a backup and tried flashing gravitron... now I'm in a nonstop bootloop or I'm at the warning custom o's found.... can any one tell me where to start to fix? Currently downloading Odin to try and flash a stock image if it has?
cbrewington75 said:
Ok so I had a nc1.. used towel root,rf, and safe strap.made a backup and tried flashing gravitron... now I'm in a nonstop bootloop or I'm at the warning custom o's found.... can any one tell me where to start to fix? Currently downloading Odin to try and flash a stock image if it has?
Click to expand...
Click to collapse
Do you still get the Safestrap splash screen on boot? If so you can just restore or reflash. Otherwise, you'll need to use the NB1 Odin and take the NC1 OTA.
Before you flash again, make sure you wipe in Safestrap (all but external SD) and check your ROM. Make sure it doesn't need an updater-script in the All Things MK2 & NB1 thread and for gravitron specifically download the Safestrap version of it.
Sent from my SGH-I337 running GPE
DeadlySin9 said:
Do you still get the Safestrap splash screen on boot? If so you can just restore or reflash. Otherwise, you'll need to use the NB1 Odin and take the NC1 OTA.
Before you flash again, make sure you wipe in Safestrap (all but external SD) and check your ROM. Make sure it doesn't need an updater-script in the All Things MK2 & NB1 thread and for gravitron specifically download the Safestrap version of it.
Sent from my SGH-I337 running GPE
Click to expand...
Click to collapse
man this has taken all day....
1. basically i did make a intial backup with safstrap in slot 1 cause thats all i could use.
i flashed gravitron the att version but i guess there is a kernal mod i need to be flashing after.
needless to say i finally got into odin and got a tar. file for a fully rootable 4.4.2
ive flashed since my evo....this new safstrap especially anything to do with flashing, do i have a recovery or no, can i even flash right now or is it just to freeze things in TB??
so much stuff on xda.....yes i used search ...thats why im back to a normal phone....but geeze man
Thanks for the help
cbrewington75 said:
man this has taken all day....
1. basically i did make a intial backup with safstrap in slot 1 cause thats all i could use.
i flashed gravitron the att version but i guess there is a kernal mod i need to be flashing after.
needless to say i finally got into odin and got a tar. file for a fully rootable 4.4.2
ive flashed since my evo....this new safstrap especially anything to do with flashing, do i have a recovery or no, can i even flash right now or is it just to freeze things in TB??
so much stuff on xda.....yes i used search ...thats why im back to a normal phone....but geeze man
Thanks for the help
Click to expand...
Click to collapse
Man i did the same thing when i first got this phone 3 weeks ago . i read a lot a first but i was so used to a phone without a locked boot loader. if you ahev any ?'s feel free to ask away . Im willing to help out .. i learned a ton since 3 weeks ago .. especially after bricking twice . If you have to use safetstrap then after falshing a rom do not reboot . flash the approiate kernel modules and Su if it calls for it in the install instructions.. Good luck

[Q] safestrap recovery

i am having a problem with my att galaxy s5 I can get into safestrap recovery but on start up if I choose continue it will freeze on the att logo screen and I fear it has possibily wiped my internal sd , im not sure ihave rooted it with towelroot and thought safestrap was the recovery to use ..how do I get back to stock firmware I cant find where my backup stock firmware is ,guess its been deleted too ? can I still put a stock recovery on with my ss recovery or possibily flash another rom on it ? plz help:crying:
chrislatham08 said:
i am having a problem with my att galaxy s5 I can get into safestrap recovery but on start up if I choose continue it will freeze on the att logo screen and I fear it has possibily wiped my internal sd , im not sure ihave rooted it with towelroot and thought safestrap was the recovery to use ..how do I get back to stock firmware I cant find where my backup stock firmware is ,guess its been deleted too ?
Click to expand...
Click to collapse
I have to wonder why you are posting here, rather than in the Safestrap support thread where you would undoubtly get the benefit of more experience. You also haven't provided enough detail to make it clear what has happened.
Where is your backup stock firmware? Where ever you put it. It sounds like you didn't make one though, in which case the answer is that there isn't one. You can download the stock firmware from numerous sources.
Guides to return to stock ATT, if that is what you want to do -
http://forum.xda-developers.com/showthread.php?t=2785185
http://forum.xda-developers.com/showpost.php?p=53459006
.

bootlooping sucks.....

Ok so now I have a brand new S4. Came in the mail yesterday. So I rooted it. No problem...... went to add a custom rom. (Sacs custom rom to be exact) reboots ok. Galaxy S4 screen. Then the custom rom screen and it stays there........ phone gets extremely hot. I went into recovery. Wiped data. Wiped cache. Wiped dalvik cache. Nothing. So I says ok, forget it. I'm going to Just take the root off and go back to stock firmware. Odin fails to unroot every time. I get Fail (Auth). I downloaded the right tar files to unroot. I even deleted them and re downloaded them. Same results. I'm going crazy because I just got this phone and I can't use it. Any help on what I'm doing wrong? Mind you I've been rooting for years and I've never had this problem before. Also it's a newer S4 that has the Sprint Spark screen. Anything would help. Thanks
sonny82 said:
Ok so now I have a brand new S4. Came in the mail yesterday. So I rooted it. No problem...... went to add a custom rom. (Sacs custom rom to be exact) reboots ok. Galaxy S4 screen. Then the custom rom screen and it stays there........ phone gets extremely hot. I went into recovery. Wiped data. Wiped cache. Wiped dalvik cache. Nothing. So I says ok, forget it. I'm going to Just take the root off and go back to stock firmware. Odin fails to unroot every time. I get Fail (Auth). I downloaded the right tar files to unroot. I even deleted them and re downloaded them. Same results. I'm going crazy because I just got this phone and I can't use it. Any help on what I'm doing wrong? Mind you I've been rooting for years and I've never had this problem before. Also it's a newer S4 that has the Sprint Spark screen. Anything would help. Thanks
Click to expand...
Click to collapse
sph-l720t?? I've heard conflicting reports about compatibility with custom sph-l720 ROMs and spark capable sph-l720t. Best case scenario is you get it to boot, I doubt you will have working Spark functionality, however.
With the galaxy s4 TW custom ROMs you need to reboot recovery after doing your wipes and before flashing your ROM. Also, IIRC, it is best to boot to download mode from fully powered off (maybe even recovery, but I've never needed to do so).
It is also best to be on the newest custom recoveries, like twrp 2.7.0.1 and latest philz (6.25?? not sure on this one)
The steps should look like this.
1 - boot to recovery and do all your wipes.
2 - reboot recovery
3 - flash rom
3.1 wipe dalvik and cache
4 - Boot and let it settle, if you are stuck on the splash screen for longer than 10 minutes chances are it is not going to boot.
Holler back and let us know.
sonny82 said:
Ok so now I have a brand new S4. Came in the mail yesterday. So I rooted it. No problem...... went to add a custom rom. (Sacs custom rom to be exact) reboots ok. Galaxy S4 screen. Then the custom rom screen and it stays there........ phone gets extremely hot. I went into recovery. Wiped data. Wiped cache. Wiped dalvik cache. Nothing. So I says ok, forget it. I'm going to Just take the root off and go back to stock firmware. Odin fails to unroot every time. I get Fail (Auth). I downloaded the right tar files to unroot. I even deleted them and re downloaded them. Same results. I'm going crazy because I just got this phone and I can't use it. Any help on what I'm doing wrong? Mind you I've been rooting for years and I've never had this problem before. Also it's a newer S4 that has the Sprint Spark screen. Anything would help. Thanks
Click to expand...
Click to collapse
If Odin fails then you DID download the wrong tar file. Since you said you just got your phone then you need to know what version you have, there are 2: the L720 & the L720T. If your phone was brand new when you bought it than most likely it is the L720T and none of the roms on this site are compatible with your phone. Some of them will work but you will loose features or have to take extra steps to get the rom working. Once you know which phone you have, you will need to download the correct tar file. If you do have the L720 than the only tar file that will get your phone up and working is the full NAE tar. If you have the L720T then you will need the NC6 ful tar. Any older tar files will fail.
wilzard said:
sph-l720t?? I've heard conflicting reports about compatibility with custom sph-l720 ROMs and spark capable sph-l720t. Best case scenario is you get it to boot, I doubt you will have working Spark functionality, however.
With the galaxy s4 TW custom ROMs you need to reboot recovery after doing your wipes and before flashing your ROM. Also, IIRC, it is best to boot to download mode from fully powered off (maybe even recovery, but I've never needed to do so).
It is also best to be on the newest custom recoveries, like twrp 2.7.0.1 and latest philz (6.25?? not sure on this one)
The steps should look like this.
1 - boot to recovery and do all your wipes.
2 - reboot recovery
3 - flash rom
3.1 wipe dalvik and cache
4 - Boot and let it settle, if you are stuck on the splash screen for longer than 10 minutes chances are it is not going to boot.
Holler back and let us know.
Click to expand...
Click to collapse
it worked!!!!! you are the man!!!! thanks a lot!!!!!
cruise350 said:
If Odin fails then you DID download the wrong tar file. Since you said you just got your phone then you need to know what version you have, there are 2: the L720 & the L720T. If your phone was brand new when you bought it than most likely it is the L720T and none of the roms on this site are compatible with your phone. Some of them will work but you will loose features or have to take extra steps to get the rom working. Once you know which phone you have, you will need to download the correct tar file. If you do have the L720 than the only tar file that will get your phone up and working is the full NAE tar. If you have the L720T then you will need the NC6 ful tar. Any older tar files will fail.
Click to expand...
Click to collapse
cool so where would i find these new tar files?
cruise350 said:
If Odin fails then you DID download the wrong tar file. Since you said you just got your phone then you need to know what version you have, there are 2: the L720 & the L720T. If your phone was brand new when you bought it than most likely it is the L720T and none of the roms on this site are compatible with your phone. Some of them will work but you will loose features or have to take extra steps to get the rom working. Once you know which phone you have, you will need to download the correct tar file. If you do have the L720 than the only tar file that will get your phone up and working is the full NAE tar. If you have the L720T then you will need the NC6 ful tar. Any older tar files will fail.
Click to expand...
Click to collapse
im on L720. now this new NAE tar. will it put me back to stock firmware? because thats what i want to do. no rrot on this phone.
sonny82 said:
im on L720. now this new NAE tar. will it put me back to stock firmware? because thats what i want to do. no rrot on this phone.
Click to expand...
Click to collapse
You can download the NAE tar file from here: http://forum.xda-developers.com/showthread.php?t=2663619
You should use Odin 3.07 or 3.09 to install. Make sure you run Odin in administrator mode.
sonny82 said:
it worked!!!!! you are the man!!!! thanks a lot!!!!!
Click to expand...
Click to collapse
Awesome, dude. Very happy to hear that.
tar files
Where can I get the NC6 tar file. I have the SPH720T , I rooted it fine, then tried to get the native tether to work and now my phone starts up and then gets stuck on the Sprint Sparks screen, I've tried 4 different tar files and all fail. I'm using Odin 3.9

Acquiring lollipop from 4.4.2 nc4

Hello
First let it be known that i have searched my butt off and tried many different things. The best i could get was a rooted phone and a non working safestrap install.
Can someone please give clear instructions here in this thread to either a) install safestrap on 4.4.2 nc4 or b) let me know if it's possible to install verizons stock lollipop firmware using odin (no recovery required).
I would love to get a working custom recovery to try different roms. Failing that, id love to know if it's possible to just flash stock lollipop firmware on this device.
I'm sorry to make such a request, as my first post.. But have been rooting and roming and xdaing since the Samsung vibrant. I'm just tired of trying to make this locked bootloader work. I must've tried a hundred different things.
As of right now ive odind back to 4.4.2 stock with nc4 kernel and said root, busybox, and supersu.
I'm familiar with odin, flashing, all the terminology, and can find the files on my own.
scottayy said:
Hello
First let it be known that i have searched my butt off and tried many different things. The best i could get was a rooted phone and a non working safestrap install.
Can someone please give clear instructions here in this thread to either a) install safestrap on 4.4.2 nc4 or b) let me know if it's possible to install verizons stock lollipop firmware using odin (no recovery required).
I would love to get a working custom recovery to try different roms. Failing that, id love to know if it's possible to just flash stock lollipop firmware on this device.
I'm sorry to make such a request, as my first post.. But have been rooting and roming and xdaing since the Samsung vibrant. I'm just tired of trying to make this locked bootloader work. I must've tried a hundred different things.
As of right now ive odind back to 4.4.2 stock with nc4 kernel and said root, busybox, and supersu.
I'm familiar with odin, flashing, all the terminology, and can find the files on my own.
Click to expand...
Click to collapse
Yes..you can flash stock firmware for 5.0 via Odin. You will lose root and as of this time....can not root 5.0
once on 5.0, you can only odin back to 4.4.4 which is also unrootable.
simplyeorange said:
Yeah you can go back to 4.4.4 I've read post of people on this forum saying they were able to get back to 4.4.4 you need to download the stock tar. Which you can find on sammobile than boot into download mode and then open Odin flash the stock tar. After its done flashing Then boot into stock recovery and do factory data reset. Wait about 5-10mins and should boot you into 4.4.4
Click to expand...
Click to collapse
Sent from my Note 3 via Tapatalk
Thanks for that. I'm sorry about the aggressive tone of my original post. I was just quite frankly mad at how much verizon locked the note 3 down. I own it, you know? Lol.
I wanted custom recovery mostly for the nandroid backups. If i flash the nc2 kernel on 4.4.2 with nc4 kernel... Supposedly this is supposed to make safestrap work with one rom slot (stock). I tried this but it soft bricked. Is there a custom nc2 kernel I'm supposed to flash?
Also if i odin the stock 5.0 files will this keep all user apps and data? I suppose i could use titanium backup for that but I'm not sure if it will be compatible from 4.4.2 to 5.0?
I guess i have to debate whether i want nandroid backup abilities or lollipop.

Categories

Resources