Related
Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced
BurnAll said:
Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced
Click to expand...
Click to collapse
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?
agent929 said:
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?
Click to expand...
Click to collapse
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
heck at this point i'd be happy just to get it back to normal as its late and i need to sleep and work tomorrow
BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)
agent929 said:
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)
Click to expand...
Click to collapse
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen
BurnAll said:
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen
Click to expand...
Click to collapse
It says page not found...get the dots out of your link
Did you use your carriers Kernel?
Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.
agent929 said:
Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.
Click to expand...
Click to collapse
i have the m
BurnAll said:
i have the m
Click to expand...
Click to collapse
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.
agent929 said:
It says page not found...get the dots out of your link
Click to expand...
Click to collapse
sorry here it is.
another fella on bell said this one worked for him
http://forum.xda-developers.com/showthread.php?p=41675354
lgsshedden said:
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.
Click to expand...
Click to collapse
okay thanks i'll try to restore it using odin with the MG1 and then give the philz a shot. i'll update u once i've done so.
CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304
lgsshedden said:
CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304
Click to expand...
Click to collapse
okay got it back to stock, now quick question for the philz do i flash the .tar with odin? or do something else with the .zip?
Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
agent929 said:
Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.
BurnAll said:
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.
Click to expand...
Click to collapse
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
READ THIS FIRST:
MAKE SURE YOU DO NOT HAVE THE MF3 FIRMWARE ON YOUR S4. THAT IS THE MOST IMPORTANT THING TO DO RIGHT NOW. IF YOU DO, DO NOT ATTEMPT TO INSTALL A CUSTOM RECOVERY.
You don't have a custom recovery already that's why. Did casual not install TWRP for you? If not try installing Goo Manager from the app market and try installing TWRP that way. MAKE SURE THAT WHEN YOU INSTALL IT, IT SAYS YOUR MODEL NUMBER EXACTLY! I CAN NOT STRESS THIS ENOUGH! When you have TWRP installed, then flash philz with TWRP and you'll have that custom recovery instead.
BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
do not use the zip you quoted it is not for your phone
use odin flash the tar philz_touch_5.15.0-jfltecan.tar.md5
now you have stock updated MG1 firmware with the latest baseband
root by CF root
Philz Recovery
Now follow the next steps:
1. set up your google account play store etc.
2.next, go into the recovery and do a full nandroid backup -- this gives you a stable base you can restore when needed
3. go flash a custom rom, I highly recommend the latest version of Goldeneye -- updated, well maintained, great developer, clear install instructions
4. try itt then again, use recovery to make a 2nd nandroid, this one of your custom rom install -- try different kernels, every phone is different and someone's favorite kernel just may not like your phone -- doesn't make it a bad kernel just makes it the wrong one for your phone, flash a different one
5. theme if you want -- this is where your recoveries become important as themes are notorious for not always sitting well and all is ok if you have a backup you can return to
6. NEVER flash a baseband from another variant -- stick with your MG1 from your carrier until your carrier updates stock firmware
I know I am stupid, but I am trying to just get this phone to work. I did try and search for something that would come close to what I am encountering, but so far I can't find anything that would suggest a possible workaround. So, I hope this is in line with the rules, if not, please let me know and I will remove this myself pronto.
I was on 4.3 (MK2), rooted with TWRP and installed Xposed, all was fine and well, until AT&T decided to attack my phone to "remind" me to update to a newer version. After a few weeks I finally gave in, and knowing that I have somewhat heavily modified this phone, I went ahead and disable and uninstall Xposed, then head on to try and flash NC1 onto this phone via TWRP 3.72.
I was following this post, using post#3, and all was well, expect when I tried to flash AP using Odin, it was late and I failed to catch the fact Odin didn't connect my phone, so I guess the kernel didn't update. Then I went ahead and try booting it up. It got to the AT&T globe logo, only it has orange strips instead of blue. I waited maybe 15 mins for it to boot, and upon thinking it is not working, I pulled the battery and went into recovery and found I had a very early version backup, which I then restored that. It did boot! But the wifi wouldn't turn on, so I went and checked, the baseband was on NC1, but everything else is at MK2 (4.3). At that point, I give up and went to bed.
This morning, after giving it some good thoughts and research, I tried to Odin again, and this time I succeed, Odin recognizes my phone, and it flash the AP as it should. But when I try boot it up, it would only get to "safestrap disabled" and then black screen. After that, I can only get into the custom recovery, but no matter what I try, full/advance wipe, install, it would show something like "E: cannot mount system" so no matter what ROM I downloaded, it would not install, and when I try and re-boot, it would warn me that there is " No System"
So my question now is: since I can still see and access recovery, not all hope is lost, but since this is a work phone, I do need it back up and running, and I need it fast. How should I proceed from here? I tried straight flash a GPE ROM from here, but it would still run into the error of "E: cannot mount system" and trying to wipe/advance wipe would not work either.
If anyone has any idea what kind of problems I am running into, I am all ears to hear and try my best to get my work phone back up and running. Thank you all for taking you time to read, think and maybe help.
iantung329 said:
I know I am stupid, but I am trying to just get this phone to work. I did try and search for something that would come close to what I am encountering, but so far I can't find anything that would suggest a possible workaround. So, I hope this is in line with the rules, if not, please let me know and I will remove this myself pronto.
I was on 4.3 (MK2), rooted with TWRP and installed Xposed, all was fine and well, until AT&T decided to attack my phone to "remind" me to update to a newer version. After a few weeks I finally gave in, and knowing that I have somewhat heavily modified this phone, I went ahead and disable and uninstall Xposed, then head on to try and flash NC1 onto this phone via TWRP 3.72.
I was following this post, using post#3, and all was well, expect when I tried to flash AP using Odin, it was late and I failed to catch the fact Odin didn't connect my phone, so I guess the kernel didn't update. Then I went ahead and try booting it up. It got to the AT&T globe logo, only it has orange strips instead of blue. I waited maybe 15 mins for it to boot, and upon thinking it is not working, I pulled the battery and went into recovery and found I had a very early version backup, which I then restored that. It did boot! But the wifi wouldn't turn on, so I went and checked, the baseband was on NC1, but everything else is at MK2 (4.3). At that point, I give up and went to bed.
This morning, after giving it some good thoughts and research, I tried to Odin again, and this time I succeed, Odin recognizes my phone, and it flash the AP as it should. But when I try boot it up, it would only get to "safestrap disabled" and then black screen. After that, I can only get into the custom recovery, but no matter what I try, full/advance wipe, install, it would show something like "E: cannot mount system" so no matter what ROM I downloaded, it would not install, and when I try and re-boot, it would warn me that there is " No System"
So my question now is: since I can still see and access recovery, not all hope is lost, but since this is a work phone, I do need it back up and running, and I need it fast. How should I proceed from here? I tried straight flash a GPE ROM from here, but it would still run into the error of "E: cannot mount system" and trying to wipe/advance wipe would not work either.
If anyone has any idea what kind of problems I am running into, I am all ears to hear and try my best to get my work phone back up and running. Thank you all for taking you time to read, think and maybe help.
Click to expand...
Click to collapse
Are you sure you have Safestrap 3.72? It should be working if you do. Either way, try flashing the MK2 AP file/kernel from the downgrade thread or the KitKat Toolkit. That should guarantee it mounts and then you can try again. If that doesn't work, you might just have to ODIN NB1 and start from the downgrade.
DeadlySin9 said:
Are you sure you have Safestrap 3.72? It should be working if you do. Either way, try flashing the MK2 AP file/kernel from the downgrade thread or the KitKat Toolkit. That should guarantee it mounts and then you can try again. If that doesn't work, you might just have to ODIN NB1 and start from the downgrade.
Click to expand...
Click to collapse
I am now just trying to boot up the phone to check, and right now it is stuck at the Samsung Custom lock (white). So I guess either Odin NB1 or MK2 and start from there?
The only thing I think its odd is, it keeps telling me that it can't mount the system, and I can't for the live of me figure why that would even happen....
iantung329 said:
I am now just trying to boot up the phone to check, and right now it is stuck at the Samsung Custom lock (white). So I guess either Odin NB1 or MK2 and start from there?
The only thing I think its odd is, it keeps telling me that it can't mount the system, and I can't for the live of me figure why that would even happen....
Click to expand...
Click to collapse
If you had not taken the OTA from AT&T your phone bootloader is still on MK2.
Did you flash NC1 before or after you received OTA from AT&T.
sway8966 said:
If you had not taken the OTA from AT&T your phone bootloader is still on MK2.
Did you flash NC1 before or after you received OTA from AT&T.
Click to expand...
Click to collapse
I was not able to take the OTA from AT&T, due to that it was rooted and Xposed, so somehow the system check would backfire. When I got the phone, it was on MK2, and I only rooted it and installed custom recovery, for I only need to be able to delete some stuff at will, thus, the root access.
Actually, since I can't boot pass the Samsung custom lock, is it still possible to use Odin? I would have thought Odin would not recognize the phone since it is not on.....
iantung329 said:
I was not able to take the OTA from AT&T, due to that it was rooted and Xposed, so somehow the system check would backfire. When I got the phone, it was on MK2, and I only rooted it and installed custom recovery, for I only need to be able to delete some stuff at will, thus, the root access.
Actually, since I can't boot pass the Samsung custom lock, is it still possible to use Odin? I would have thought Odin would not recognize the phone since it is not on.....
Click to expand...
Click to collapse
It will still work, ODIN requires you to hold one of the volume buttons while powering on to go into download mode on the phone which doesn't require booting to system.
DeadlySin9 said:
It will still work, ODIN requires you to hold one of the volume buttons while powering on to go into download mode on the phone which doesn't require booting to system.
Click to expand...
Click to collapse
OK, so just tried Odin it using the files from Deadly Venom Kitkat Magic Tool. Odin caught the phone alright, but after the files are lined up (the mk2 ones), it give me the following:
Get PIT for mapping..
There is no PIT partition
All threads completed. (succeed 0/ failed 1)
And of course, the top also showed FAIL!
Any suggestions? Try going directly to NB1 and downgrade from there?
iantung329 said:
OK, so just tried Odin it using the files from Deadly Venom Kitkat Magic Tool. Odin caught the phone alright, but after the files are lined up (the mk2 ones), it give me the following:
Get PIT for mapping..
There is no PIT partition
All threads completed. (succeed 0/ failed 1)
And of course, the top also showed FAIL!
Any suggestions? Try going directly to NB1 and downgrade from there?
Click to expand...
Click to collapse
So after an all-night, I finally got it back up and running. Here is what I did, in case someone runs into the same problem.
I grabbed the MK2 file here, un-zip it, Odin it to its respective slots, and then flash it. It took over 10 mins, but it did finish the flash, and Odin showed "PASS!"
So, now I have another question, I booted it up like when it first came in the box, so went through and did all the setup. I went into setting, and I see the following:
Android version: 4.3
Baseband: I337-MK2
Kernel: signed Sat Nov 16 14:33:13 KST 2013
Build #: JSS-MK2
So if I want to do this upgrade to 4.4.2/4.4.3 again, would I consider my phone as stock MK2 that has not been tried to upgrade to 4.4.2/4.4.3? I did try and confirmed that I don't have root (obviously), so I guess I have to treat this phone as if it never took any updates/modifications? Then I would ask which route to follow to ensure the best and most confirm result of upgrading to either 4.4.2/4.4.3.
Thanks all for your thoughts on how to de-bug this. :laugh:
iantung329 said:
So after an all-night, I finally got it back up and running. Here is what I did, in case someone runs into the same problem.
I grabbed the MK2 file here, un-zip it, Odin it to its respective slots, and then flash it. It took over 10 mins, but it did finish the flash, and Odin showed "PASS!"
So, now I have another question, I booted it up like when it first came in the box, so went through and did all the setup. I went into setting, and I see the following:
Android version: 4.3
Baseband: I337-MK2
Kernel: signed Sat Nov 16 14:33:13 KST 2013
Build #: JSS-MK2
So if I want to do this upgrade to 4.4.2/4.4.3 again, would I consider my phone as stock MK2 that has not been tried to upgrade to 4.4.2/4.4.3? I did try and confirmed that I don't have root (obviously), so I guess I have to treat this phone as if it never took any updates/modifications? Then I would ask which route to follow to ensure the best and most confirm result of upgrading to either 4.4.2/4.4.3.
Thanks all for your thoughts on how to de-bug this. :laugh:
Click to expand...
Click to collapse
Yes your phone is stock MK2.
I do not know about 4.4.3 but you can find many 4.4.2 custom rom in the developer section.
First you need to root the phone. You can get the required files and instruction from here.
Second, you need to install the custom recovery. Since you are on MK2 you need to use Safestrap version 3.71. You can get the file and instructions here.
Once you have rooted and finish installing the SS (safestrap) you can find the custom rom in the developer section. Find the roms with SS option.
sway8966 said:
Yes your phone is stock MK2.
I do not know about 4.4.3 but you can find many 4.4.2 custom rom in the developer section.
First you need to root the phone. You can get the required files and instruction from here.
Second, you need to install the custom recovery. Since you are on MK2 you need to use Safestrap version 3.71. You can get the file and instructions here.
Once you have rooted and finish installing the SS (safestrap) you can find the custom rom in the developer section. Find the roms with SS option.
Click to expand...
Click to collapse
Sway8966, thank you for saving my behind more than once.
I will be following your instruction as to rooting the phone and also install custom recovery. However, if you see my first post, it seems I need to first install SS 3.71 to root, then SS 3.72 to upgrade to NB1/NC1? I will take a safe bet that I can't just use SS 3.72 to avoid brick. Also, that GPE version ROM, I had trouble finding the kernel, would there be a place to find it? Or is it in the package? I un-zipped it, but can't find the file that looks like the kernel in it.
Thanks again. :laugh:
iantung329 said:
Sway8966, thank you for saving my behind more than once.
I will be following your instruction as to rooting the phone and also install custom recovery. However, if you see my first post, it seems I need to first install SS 3.71 to root, then SS 3.72 to upgrade to NB1/NC1? I will take a safe bet that I can't just use SS 3.72 to avoid brick. Also, that GPE version ROM, I had trouble finding the kernel, would there be a place to find it? Or is it in the package? I un-zipped it, but can't find the file that looks like the kernel in it.
Thanks again. :laugh:
Click to expand...
Click to collapse
iantung329 I am glad to help you out.
You do not need to install SS recovery first to root the phone. Rooting is done by using the adb command to push the super user in the system area.
Since you are in a MK2 firmware/bootloader Safestrap 3.71 is the only one you can use.
Also your bootloader is MK2 so I would not go to install the NB1/NC1 system file on your phone. SS 3.72 is for the NB1/NC1.
To upgrade your phone to 4.4.2 OS you can find the custom rom packages (including the kernel) in here.
Bootloader MK2 and above can not use the custom kernel since there is no exploit for the kernel out so far. So you need to choose the TOUCHWIZ rom with SS version, not AOSP (Android open-source project) rom.
We are not supposed to tell you which rom to choose because people might not have similar taste or expectation in the choice of rom. Read around and choose the rom that you want.
If you'd asked me, I use Golden Eye rom. I am on NC1. You can see that in my signature section.
I will tell you how I installed the Golden eye rom as an example.
I download the package (zip file), my NC1 stock kernel file and superSU file.
Using the safestrap I installed the package zip file. After the installation finished I installed the NC1 kernel file and SuperSU file. Then I reboot my phone. That is. Other roms might have different instructions.
iantung329 said:
Sway8966, thank you for saving my behind more than once.
I will be following your instruction as to rooting the phone and also install custom recovery. However, if you see my first post, it seems I need to first install SS 3.71 to root, then SS 3.72 to upgrade to NB1/NC1? I will take a safe bet that I can't just use SS 3.72 to avoid brick. Also, that GPE version ROM, I had trouble finding the kernel, would there be a place to find it? Or is it in the package? I un-zipped it, but can't find the file that looks like the kernel in it.
Thanks again. :laugh:
Click to expand...
Click to collapse
sway8966 said:
iantung329 I am glad to help you out.
You do not need to install SS recovery first to root the phone. Rooting is done by using the adb command to push the super user in the system area.
Since you are in a MK2 firmware/bootloader Safestrap 3.71 is the only one you can use.
Also your bootloader is MK2 so I would not go to install the NB1/NC1 system file on your phone. SS 3.72 is for the NB1/NC1.
To upgrade your phone to 4.4.2 OS you can find the custom rom packages (including the kernel) in here.
Bootloader MK2 and above can not use the custom kernel since there is no exploit for the kernel out so far. So you need to choose the TOUCHWIZ rom with SS version, not AOSP (Android open-source project) rom.
We are not supposed to tell you which rom to choose because people might not have similar taste or expectation in the choice of rom. Read around and choose the rom that you want.
If you'd asked me, I use Golden Eye rom. I am on NC1. You can see that in my signature section.
I will tell you how I installed the Golden eye rom as an example.
I download the package (zip file), my NC1 stock kernel file and superSU file.
Using the safestrap I installed the package zip file. After the installation finished I installed the NC1 kernel file and SuperSU file. Then I reboot my phone. That is. Other roms might have different instructions.
Click to expand...
Click to collapse
As sway said, you do not need Safestrap to root, you just use Saferoot and you have root. However, you can actually use SS 3.72 and it would be better to use it since you can then mount /system even while on a 4.4.2 kernel. You can also use the single GPE located in the general section. Sway's ROM flashing instructions are correct, but also remember to flash the kernel module zip in Safestrap, and you would be using the MLD set since you have the MK2 bootloader. The kernels and everything you need are included in the KitKat Magic Toolkit.
DeadlySin9 said:
As sway said, you do not need Safestrap to root, you just use Saferoot and you have root. However, you can actually use SS 3.72 and it would be better to use it since you can then mount /system even while on a 4.4.2 kernel. You can also use the single GPE located in the general section. Sway's ROM flashing instructions are correct, but also remember to flash the kernel module zip in Safestrap, and you would be using the MLD set since you have the MK2 bootloader. The kernels and everything you need are included in the KitKat Magic Toolkit.
Click to expand...
Click to collapse
:crying::crying::crying:
Sigh, I will admit, I have done it again, so I am back to flashing the MK2 file from a few post ago.
I think I will either go with stock rooted ROM or the GPE version, I think the only thing I am missing is the kernel, which I found in one of the post I have to Loki it since I am on AT&T, but I can't find the Loki software, or would that be using Odin as well?
The only reason I am looking to root this phone is so that I can tether. Traveling roughly 2-3 weeks a month ain't fun, but not all hotels have free wifi, so having my phone rooted and able to tether is like a life line. Also, after I tried GB, its wonderful! Apart from I can't find a good quiet time option, everything is awesome being able to use GB and AdBlock. Does either Sway or DeadlySin9 have a good recommendation for quiet time app/mod?
As soon as I get the phone back on stock MK2, I will be looking into either stock root ROM or GPE version. Thanks all! :fingers-crossed:
iantung329 said:
:crying::crying::crying:
Sigh, I will admit, I have done it again, so I am back to flashing the MK2 file from a few post ago.
I think I will either go with stock rooted ROM or the GPE version, I think the only thing I am missing is the kernel, which I found in one of the post I have to Loki it since I am on AT&T, but I can't find the Loki software, or would that be using Odin as well?
The only reason I am looking to root this phone is so that I can tether. Traveling roughly 2-3 weeks a month ain't fun, but not all hotels have free wifi, so having my phone rooted and able to tether is like a life line. Also, after I tried GB, its wonderful! Apart from I can't find a good quiet time option, everything is awesome being able to use GB and AdBlock. Does either Sway or DeadlySin9 have a good recommendation for quiet time app/mod?
As soon as I get the phone back on stock MK2, I will be looking into either stock root ROM or GPE version. Thanks all! :fingers-crossed:
Click to expand...
Click to collapse
OK. @DeadlySin9, got the final question (hopefully :fingers-crossed
I am going to flash GPE version (here) and I will be following the direction on that, wipe, flash, kernel then reboot. You mentioned that I should use the MLD kernels, but which one is that in the Kitkat magic tool? AP_MLD, BL_MLD? And now I have SS 3.71 on the phone, would you recommend uninstalling that and install SS 3.72 instead, since I will be flashing GPE version anyway?
Also, what of this ROM (here)? I guess I can't flash this one?
iantung329 said:
OK. @DeadlySin9, got the final question (hopefully :fingers-crossed
I am going to flash GPE version (here) and I will be following the direction on that, wipe, flash, kernel then reboot. You mentioned that I should use the MLD kernels, but which one is that in the Kitkat magic tool? AP_MLD, BL_MLD? And now I have SS 3.71 on the phone, would you recommend uninstalling that and install SS 3.72 instead, since I will be flashing GPE version anyway?
Also, what of this ROM (here)? I guess I can't flash this one?
Click to expand...
Click to collapse
Actually, neither of those work. There's one in the General section, with Safestrap in the thread title. That's the one you need. I do recommend going to 3.72 on Safestrap, and you need to use both the AP and BL files in ODIN.
Sent from my SGH-I337 running GPE
DeadlySin9 said:
Actually, neither of those work. There's one in the General section, with Safestrap in the thread title. That's the one you need. I do recommend going to 3.72 on Safestrap, and you need to use both the AP and BL files in ODIN.
Sent from my SGH-I337 running GPE
Click to expand...
Click to collapse
This is the only one I can find (here)
Also, by the look of it, paid apps wouldn't work in this ROM, that might be a problem.
Here is another one that I was considering from the start (here), but I am not sure if I should follow the first post or second?
iantung329 said:
This is the only one I can find (here)
Also, by the look of it, paid apps wouldn't work in this ROM, that might be a problem.
Here is another one that I was considering from the start (here), but I am not sure if I should follow the first post or second?
Click to expand...
Click to collapse
If you're still on MK2 then you can use the second one. And yeah, you can't download paid apps from the Play Store for some reason.
DeadlySin9 said:
If you're still on MK2 then you can use the second one. And yeah, you can't download paid apps from the Play Store for some reason.
Click to expand...
Click to collapse
@DeadlySin9, thanks for pointing out the correct one to use, and yes, I am still stock on MK2, rooted and have not installed SS, pending the version discussion. I will go ahead and install SS 3.72 and the ROM from the first post and :fingers-crossed: that it will work wonders.
The reason that I am choosing this over the GPE, don't get me wrong, GPE I think is better, but no download paid apps is not going to work for me, some apps like, root explorer and a few others are a must on the phone. So that's a bummer. I wish it works, then I can just flash and be in peace.
Thank you @sway8966 also for helping out on this. I just freaked out when I found out the work phone was dead.....
Hello everyone. I was trying to get Cyanogenmod 11 on my Galaxy S4. I read a guide and followed it to a T, but I guess it must have been a bad guide, and I can't find it now.
At any rate, I have 4.2.2 with NC1, and I used Geohot's TR to get root. I installed SU, and that's working. Then (because I used to use this on my GS3) I installed Rom Toolbox pro, chose to install CWM, and I kept getting errors. So I decided to use another, ROM installer, and flash TWRP.
So now, when I reboot my phone, I just get errors that say "Odin error".
What do I need to do in order to get a custom ROM? I've read in these forums that safestrap is the only way, but I don't want to do this until I know that I can move from what I'm currently at, to safestrap. I don't want to dig my hole any deeper.
Thank you so much.
ptizzl said:
Hello everyone. I was trying to get Cyanogenmod 11 on my Galaxy S4. I read a guide and followed it to a T, but I guess it must have been a bad guide, and I can't find it now.
At any rate, I have 4.2.2 with NC1, and I used Geohot's TR to get root. I installed SU, and that's working. Then (because I used to use this on my GS3) I installed Rom Toolbox pro, chose to install CWM, and I kept getting errors. So I decided to use another, ROM installer, and flash TWRP.
So now, when I reboot my phone, I just get errors that say "Odin error".
What do I need to do in order to get a custom ROM? I've read in these forums that safestrap is the only way, but I don't want to do this until I know that I can move from what I'm currently at, to safestrap. I don't want to dig my hole any deeper.
Thank you so much.
Click to expand...
Click to collapse
You can only use Safestrap. Boot into download mode and then exit from it (I forget which button you hold) to get back in to the system. Then install Safestrap after using SELinux Mode Changer. You'll probably also want to find the recovery image for NC1 and flash that. Check the NB1-NC1 keeproot ROM thread you can find in the index for that
If you need anything else, ask here, but next time you have a new question, start it in the q&a section please.
Sent from my SGH-I337 running GPE
DeadlySin9 said:
You can only use Safestrap. Boot into download mode and then exit from it (I forget which button you hold) to get back in to the system. Then install Safestrap after using SELinux Mode Changer. You'll probably also want to find the recovery image for NC1 and flash that. Check the NB1-NC1 keeproot ROM thread you can find in the index for that
If you need anything else, ask here, but next time you have a new question, start it in the q&a section please.
Sent from my SGH-I337 running GPE
Click to expand...
Click to collapse
First, thank you for taking the time to reply, and second, I'm sorry for posting in the wrong forum.
Plus, even with SafeStrap you can't run CM/aosp roms--
rugmankc said:
Plus, even with SafeStrap you can't run CM/aosp roms--
Click to expand...
Click to collapse
I have seen that everywhere. Out of desperation, is there ANY way I can get CyanogenMod on here?
Secondly, my phone is having issues and I want to restore it to factory settings. When I choose this, it reboots and I get the ODIN error. I then have to power down, then I have to hold down while restarting, then hit cancel, then it boots normally. How do I remedy this?
ptizzl said:
I have seen that everywhere. Out of desperation, is there ANY way I can get CyanogenMod on here?
Give up or get another phone-- NO CM at this time--there is a GE rom in General, I believe, for SafeStrap.
Not sure on other issue, maybe Odin back to stock--someone else may have suddestion--Read up on things in General and Q&A on SafeStrap. And a couple other threads like All Things MK2 etc--:good:
Click to expand...
Click to collapse
rugmankc said:
Plus, even with SafeStrap you can't run CM/aosp roms--
Click to expand...
Click to collapse
Has to be TouchWiz rom. To me it is not worth the effort. I just stay stock for now.
I was hoping to get some help.
I installed SafeStrap, used SELinux, and then installed GoldenEye Rom on slot 1 after taking a backup of my current rom to my external SD card. I then installed update-supersu and att_nc1_modules through safestrap.
I reboot into system and it just boots into the exact same rom as my stock rom... but the only difference is that my networks don't work. So I've booted back into safestrap and changed my boot device back to stock and all is well.
What step am I missing?
Edit: Yes, I've made sure that Rom Slot 1 is active before booting into it.
Don't use SS so not sure what you missed--
Did you follow this--
http://forum.xda-developers.com/showpost.php?p=53038182&postcount=13961
rugmankc said:
Don't use SS so not sure what you missed--
Did you follow this--
http://forum.xda-developers.com/showpost.php?p=53038182&postcount=13961
Click to expand...
Click to collapse
Yes, this is the guide I followed.
I've been looking into this a bit more, and it looks like I may need to just overwrite the stock rom slot.
ptizzl said:
I was hoping to get some help.
I installed SafeStrap, used SELinux, and then installed GoldenEye Rom on slot 1 after taking a backup of my current rom to my external SD card. I then installed update-supersu and att_nc1_modules through safestrap.
I reboot into system and it just boots into the exact same rom as my stock rom... but the only difference is that my networks don't work. So I've booted back into safestrap and changed my boot device back to stock and all is well.
What step am I missing?
Edit: Yes, I've made sure that Rom Slot 1 is active before booting into it.
Click to expand...
Click to collapse
Exact same thing it did with Me also. It was the same Stock rom with all the same programs.
tailgunner9 said:
Exact same thing it did with Me also. It was the same Stock rom with all the same programs.
Click to expand...
Click to collapse
I believe that the rom slots no longer work, I'm looking at this right now.
ptizzl said:
Yes, this is the guide I followed.
I've been looking into this a bit more, and it looks like I may need to just overwrite the stock rom slot.
Click to expand...
Click to collapse
You do. You can't use rom slots with ss on kit Kat.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You do. You can't use rom slots with ss on kit Kat.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I've done this, but now my phone is just sitting on the Samsung logo for the last 10 minutes or more.
From safestrap - did the factory reset, went through the GE install process. Went to restart the phone, hasn't come back on yet.
ptizzl said:
I've done this, but now my phone is just sitting on the Samsung logo for the last 10 minutes or more.
From safestrap - did the factory reset, went through the GE install process. Went to restart the phone, hasn't come back on yet.
Click to expand...
Click to collapse
You're probably going to have to flash the nb1 tar in Odin and start over again. After flashing in Odin ota to nc1 then towelroot, then safestrap.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You're probably going to have to flash the nb1 tar in Odin and start over again. After flashing in Odin ota to nc1 then towelroot, then safestrap.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
So my backup that I made with Satestrap won't work? I'm in the process of restoring that right now.
Do you have time to explain what all of this means?
flash the nb1 tar in Odin?
OTA to NC1?
Does this mean use Odin to get back to Nb1, then use the built in samsung updater to get to nc1, then start again with TR and SS?
I am a noob, so be detailed
Edit: I assume you mean this guide here: http://forum.xda-developers.com/showthread.php?p=49562527
another thing: restoring my phone within safestrap worked. I'm back on my stock rom. At least my phone's working again.
ptizzl said:
So my backup that I made with Satestrap won't work? I'm in the process of restoring that right now.
Do you have time to explain what all of this means?
flash the nb1 tar in Odin?
OTA to NC1?
Does this mean use Odin to get back to Nb1, then use the built in samsung updater to get to nc1, then start again with TR and SS?
I am a noob, so be detailed
Click to expand...
Click to collapse
Use this file in Odin, it's the nb1 tar file. After you download it you'll need to extract it using winrar or 7-zip. You'll get a .tar.md5 file http://forum.xda-developers.com/showthread.php?p=50912149
Use that in Odin pda/pa slot depending on what version of Odin you're using.
The either just ota, over the air, update to nc1 or there is a nb1 to nc1 zip file that can be side loaded in the stock recovery.
Once on nc1 you can use tr to root.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Use this file in Odin, it's the nb1 tar file. After you download it you'll need to extract it using winrar or 7-zip. You'll get a .tar.md5 file http://forum.xda-developers.com/showthread.php?p=50912149
Use that in Odin pda/pa slot depending on what version of Odin you're using.
The either just ota, over the air, update to nc1 or there is a nb1 to nc1 zip file that can be side loaded in the stock recovery.
Once on nc1 you can use tr to root.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you for the detail. I was able to restore my backup - do I still need to do all of this prior to trying again in safestrap?
I suppose it would increase my chances at success.
ptizzl said:
Thank you for the detail. I was able to restore my backup - do I still need to do all of this prior to trying again in safestrap?
I suppose it would increase my chances at success.
Click to expand...
Click to collapse
If you restored your backup I would try to flash your rom in the stock slot of safestrap first. Only do the Odin if you can't restore first.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you restored your backup I would try to flash your rom in the stock slot of safestrap first. Only do the Odin if you can't restore first.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
So my first attempt, the one that left me in the boot loop, was from the stock slot. Try again?
Ok so now I have a brand new S4. Came in the mail yesterday. So I rooted it. No problem...... went to add a custom rom. (Sacs custom rom to be exact) reboots ok. Galaxy S4 screen. Then the custom rom screen and it stays there........ phone gets extremely hot. I went into recovery. Wiped data. Wiped cache. Wiped dalvik cache. Nothing. So I says ok, forget it. I'm going to Just take the root off and go back to stock firmware. Odin fails to unroot every time. I get Fail (Auth). I downloaded the right tar files to unroot. I even deleted them and re downloaded them. Same results. I'm going crazy because I just got this phone and I can't use it. Any help on what I'm doing wrong? Mind you I've been rooting for years and I've never had this problem before. Also it's a newer S4 that has the Sprint Spark screen. Anything would help. Thanks
sonny82 said:
Ok so now I have a brand new S4. Came in the mail yesterday. So I rooted it. No problem...... went to add a custom rom. (Sacs custom rom to be exact) reboots ok. Galaxy S4 screen. Then the custom rom screen and it stays there........ phone gets extremely hot. I went into recovery. Wiped data. Wiped cache. Wiped dalvik cache. Nothing. So I says ok, forget it. I'm going to Just take the root off and go back to stock firmware. Odin fails to unroot every time. I get Fail (Auth). I downloaded the right tar files to unroot. I even deleted them and re downloaded them. Same results. I'm going crazy because I just got this phone and I can't use it. Any help on what I'm doing wrong? Mind you I've been rooting for years and I've never had this problem before. Also it's a newer S4 that has the Sprint Spark screen. Anything would help. Thanks
Click to expand...
Click to collapse
sph-l720t?? I've heard conflicting reports about compatibility with custom sph-l720 ROMs and spark capable sph-l720t. Best case scenario is you get it to boot, I doubt you will have working Spark functionality, however.
With the galaxy s4 TW custom ROMs you need to reboot recovery after doing your wipes and before flashing your ROM. Also, IIRC, it is best to boot to download mode from fully powered off (maybe even recovery, but I've never needed to do so).
It is also best to be on the newest custom recoveries, like twrp 2.7.0.1 and latest philz (6.25?? not sure on this one)
The steps should look like this.
1 - boot to recovery and do all your wipes.
2 - reboot recovery
3 - flash rom
3.1 wipe dalvik and cache
4 - Boot and let it settle, if you are stuck on the splash screen for longer than 10 minutes chances are it is not going to boot.
Holler back and let us know.
sonny82 said:
Ok so now I have a brand new S4. Came in the mail yesterday. So I rooted it. No problem...... went to add a custom rom. (Sacs custom rom to be exact) reboots ok. Galaxy S4 screen. Then the custom rom screen and it stays there........ phone gets extremely hot. I went into recovery. Wiped data. Wiped cache. Wiped dalvik cache. Nothing. So I says ok, forget it. I'm going to Just take the root off and go back to stock firmware. Odin fails to unroot every time. I get Fail (Auth). I downloaded the right tar files to unroot. I even deleted them and re downloaded them. Same results. I'm going crazy because I just got this phone and I can't use it. Any help on what I'm doing wrong? Mind you I've been rooting for years and I've never had this problem before. Also it's a newer S4 that has the Sprint Spark screen. Anything would help. Thanks
Click to expand...
Click to collapse
If Odin fails then you DID download the wrong tar file. Since you said you just got your phone then you need to know what version you have, there are 2: the L720 & the L720T. If your phone was brand new when you bought it than most likely it is the L720T and none of the roms on this site are compatible with your phone. Some of them will work but you will loose features or have to take extra steps to get the rom working. Once you know which phone you have, you will need to download the correct tar file. If you do have the L720 than the only tar file that will get your phone up and working is the full NAE tar. If you have the L720T then you will need the NC6 ful tar. Any older tar files will fail.
wilzard said:
sph-l720t?? I've heard conflicting reports about compatibility with custom sph-l720 ROMs and spark capable sph-l720t. Best case scenario is you get it to boot, I doubt you will have working Spark functionality, however.
With the galaxy s4 TW custom ROMs you need to reboot recovery after doing your wipes and before flashing your ROM. Also, IIRC, it is best to boot to download mode from fully powered off (maybe even recovery, but I've never needed to do so).
It is also best to be on the newest custom recoveries, like twrp 2.7.0.1 and latest philz (6.25?? not sure on this one)
The steps should look like this.
1 - boot to recovery and do all your wipes.
2 - reboot recovery
3 - flash rom
3.1 wipe dalvik and cache
4 - Boot and let it settle, if you are stuck on the splash screen for longer than 10 minutes chances are it is not going to boot.
Holler back and let us know.
Click to expand...
Click to collapse
it worked!!!!! you are the man!!!! thanks a lot!!!!!
cruise350 said:
If Odin fails then you DID download the wrong tar file. Since you said you just got your phone then you need to know what version you have, there are 2: the L720 & the L720T. If your phone was brand new when you bought it than most likely it is the L720T and none of the roms on this site are compatible with your phone. Some of them will work but you will loose features or have to take extra steps to get the rom working. Once you know which phone you have, you will need to download the correct tar file. If you do have the L720 than the only tar file that will get your phone up and working is the full NAE tar. If you have the L720T then you will need the NC6 ful tar. Any older tar files will fail.
Click to expand...
Click to collapse
cool so where would i find these new tar files?
cruise350 said:
If Odin fails then you DID download the wrong tar file. Since you said you just got your phone then you need to know what version you have, there are 2: the L720 & the L720T. If your phone was brand new when you bought it than most likely it is the L720T and none of the roms on this site are compatible with your phone. Some of them will work but you will loose features or have to take extra steps to get the rom working. Once you know which phone you have, you will need to download the correct tar file. If you do have the L720 than the only tar file that will get your phone up and working is the full NAE tar. If you have the L720T then you will need the NC6 ful tar. Any older tar files will fail.
Click to expand...
Click to collapse
im on L720. now this new NAE tar. will it put me back to stock firmware? because thats what i want to do. no rrot on this phone.
sonny82 said:
im on L720. now this new NAE tar. will it put me back to stock firmware? because thats what i want to do. no rrot on this phone.
Click to expand...
Click to collapse
You can download the NAE tar file from here: http://forum.xda-developers.com/showthread.php?t=2663619
You should use Odin 3.07 or 3.09 to install. Make sure you run Odin in administrator mode.
sonny82 said:
it worked!!!!! you are the man!!!! thanks a lot!!!!!
Click to expand...
Click to collapse
Awesome, dude. Very happy to hear that.
tar files
Where can I get the NC6 tar file. I have the SPH720T , I rooted it fine, then tried to get the native tether to work and now my phone starts up and then gets stuck on the Sprint Sparks screen, I've tried 4 different tar files and all fail. I'm using Odin 3.9
Hello
First let it be known that i have searched my butt off and tried many different things. The best i could get was a rooted phone and a non working safestrap install.
Can someone please give clear instructions here in this thread to either a) install safestrap on 4.4.2 nc4 or b) let me know if it's possible to install verizons stock lollipop firmware using odin (no recovery required).
I would love to get a working custom recovery to try different roms. Failing that, id love to know if it's possible to just flash stock lollipop firmware on this device.
I'm sorry to make such a request, as my first post.. But have been rooting and roming and xdaing since the Samsung vibrant. I'm just tired of trying to make this locked bootloader work. I must've tried a hundred different things.
As of right now ive odind back to 4.4.2 stock with nc4 kernel and said root, busybox, and supersu.
I'm familiar with odin, flashing, all the terminology, and can find the files on my own.
scottayy said:
Hello
First let it be known that i have searched my butt off and tried many different things. The best i could get was a rooted phone and a non working safestrap install.
Can someone please give clear instructions here in this thread to either a) install safestrap on 4.4.2 nc4 or b) let me know if it's possible to install verizons stock lollipop firmware using odin (no recovery required).
I would love to get a working custom recovery to try different roms. Failing that, id love to know if it's possible to just flash stock lollipop firmware on this device.
I'm sorry to make such a request, as my first post.. But have been rooting and roming and xdaing since the Samsung vibrant. I'm just tired of trying to make this locked bootloader work. I must've tried a hundred different things.
As of right now ive odind back to 4.4.2 stock with nc4 kernel and said root, busybox, and supersu.
I'm familiar with odin, flashing, all the terminology, and can find the files on my own.
Click to expand...
Click to collapse
Yes..you can flash stock firmware for 5.0 via Odin. You will lose root and as of this time....can not root 5.0
once on 5.0, you can only odin back to 4.4.4 which is also unrootable.
simplyeorange said:
Yeah you can go back to 4.4.4 I've read post of people on this forum saying they were able to get back to 4.4.4 you need to download the stock tar. Which you can find on sammobile than boot into download mode and then open Odin flash the stock tar. After its done flashing Then boot into stock recovery and do factory data reset. Wait about 5-10mins and should boot you into 4.4.4
Click to expand...
Click to collapse
Sent from my Note 3 via Tapatalk
Thanks for that. I'm sorry about the aggressive tone of my original post. I was just quite frankly mad at how much verizon locked the note 3 down. I own it, you know? Lol.
I wanted custom recovery mostly for the nandroid backups. If i flash the nc2 kernel on 4.4.2 with nc4 kernel... Supposedly this is supposed to make safestrap work with one rom slot (stock). I tried this but it soft bricked. Is there a custom nc2 kernel I'm supposed to flash?
Also if i odin the stock 5.0 files will this keep all user apps and data? I suppose i could use titanium backup for that but I'm not sure if it will be compatible from 4.4.2 to 5.0?
I guess i have to debate whether i want nandroid backup abilities or lollipop.