Hello,
I've tried to flash my GN3 with the ITA nobrand MK2 firmware.
Odin gave an error after few minutes the fash started.
The phone is stucked now with this error:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I've tried with kies unsuccessfully.
Can you help me ?
Thank you.
flegius said:
Hello,
I've tried to flash my GN3 with the ITA nobrand MK2 firmware.
Odin gave an error after few minutes the fash started.
The phone is stucked now with this error:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I've tried with kies unsuccessfully.
Can you help me ?
Thank you.
Click to expand...
Click to collapse
Are you able to flash any other stock firmware via ODIN? Also try flashing with ODIN 3.09
flegius said:
Hello,
I've tried to flash my GN3 with the ITA nobrand MK2 firmware.
Odin gave an error after few minutes the fash started.
The phone is stucked now with this error:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I've tried with kies unsuccessfully.
Can you help me ?
Thank you.
Click to expand...
Click to collapse
Try download an MJ7 firmware and try again in download mode with odin.
aoneda Clara
Markudsc said:
Try download an MJ7 firmware and try again in download mode with odin.
Click to expand...
Click to collapse
Hello,
I haven't tried to flash any other firmware.
I bought the phone in hong kong and the old firmaware was:
Product Code: TGY
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
When I tried to flash the new firmware I got the following DOIN error:
ODIN: ext4 image file failed.
I'm downloading the BMI7 firmware as it is the old one.
I'll try to flash an MJ7 before.
Thank you.
polish_pat said:
Are you able to flash any other stock firmware via ODIN? Also try flashing with ODIN 3.09
Click to expand...
Click to collapse
I'm using Odin3 v 3.09
Can I use any MJ7 firmware or I have to use a specific product code like BTU ?
Thank you.
Markudsc said:
Try download an MJ7 firmware and try again in download mode with odin.
Click to expand...
Click to collapse
When I flash via Odin, I have ti specify only the AP or I have to also specify CSC and CP ?
Thank you.
Markudsc said:
Try download an MJ7 firmware and try again in download mode with odin.
Click to expand...
Click to collapse
Hello,
I've tried to download the MJ7 BTU firmware and i tried to flash it via ODIN and I always get this error:
ODIN: Invalid ext4 image
What can i do now?
Do you have any suggestions ?
Thank you.
flegius said:
When I flash via Odin, I have ti specify only the AP or I have to also specify CSC and CP ?
Thank you.
Click to expand...
Click to collapse
Every time when i flash the device with odin i just use the file firmware tar.md5 in AP
No need to specify other, but you can try if your problem persists, :-$
You have been tried a custom rom or just tried a simple update stock rom on your device?
---------- Post added 11th February 2014 at 12:05 AM ---------- Previous post was 10th February 2014 at 11:54 PM ----------
flegius said:
Hello,
I've tried to download the MJ7 BTU firmware and i tried to flash it via ODIN and I always get this error:
ODIN: Invalid ext4 image
What can i do now?
Do you have any suggestions ?
Thank you.
Click to expand...
Click to collapse
Hi again,
look, for your device TGY in sammobile have a firmware MK1 of 10 November 2013 maybe you try to download once this is the latest firmware for your country device
and try one more time, i no longer more ideas, but you can try, unzip the file and put in AP in v3.09 Odin or use the v1.85 Odin and put the file in PHONE. (Flash reset time and auto reboot ticked)
Here is the link in sammobile
http://www.sammobile.com/firmwares/2/
Markudsc said:
Every time when i flash the device with odin i just use the file firmware tar.md5 in AP
No need to specify other, but you can try if your problem persists, :-$
You have been tried a custom rom or just tried a simple update stock rom on your device?
---------- Post added 11th February 2014 at 12:05 AM ---------- Previous post was 10th February 2014 at 11:54 PM ----------
Hi again,
look, for your device TGY in sammobile have a firmware MK1 of 10 November 2013 maybe you try to download once this is the latest firmware for your country device
and try one more time, i no longer more ideas, but you can try, unzip the file and put in AP in v3.09 Odin or use the v1.85 Odin and put the file in PHONE. (Flash reset time and auto reboot ticked)
Here is the link in sammobile
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
Hi Guys,
I downloaded the latest stock rom TGY MK1
It worked fine.
I wonder if there is any possibility to flash some european roms.
What is important now is that I have my phone working.
Thank you very much.
flegius said:
Hi Guys,
I downloaded the latest stock rom TGY MK1
It worked fine.
I wonder if there is any possibility to flash some european roms.
What is important now is that I have my phone working.
Thank you very much.
Click to expand...
Click to collapse
I'm glad to help you to solve your problem
i have research in forum and hong kong devices and european roms just pranked
but for everything exists a solution
Maybe later you could try one european rom and will be succeeded.
Related
After download Official Firmware 4.3 for s4, unzip it but there is only I9500XXUEMJ5_I9500OLBEMJ5_I9500DXUEMJ5_HOME.tar.md5 file. There is not 4 file AP,BL,CP, CSC. How can i flash by Odin? Please help me. Can i flash just like a custom ROM?
jaychou8899 said:
After download Official Firmware 4.3 for s4, unzip it but there is only I9500XXUEMJ5_I9500OLBEMJ5_I9500DXUEMJ5_HOME.tar.md5 file. There is not 4 file AP,BL,CP, CSC. How can i flash by Odin? Please help me. Can i flash just like a custom ROM?
Click to expand...
Click to collapse
If it ain't broken, don't fix it, I have never actually tried ODIN v3.09 but v3.04 and even 1.85 still work well. And you can flash that through PDA in those versions of ODIN.
However if you must use ODIN v3.09, use 'AP' option and place that file you mentioned there. Cheers!
Here you find the how to for flashing with Odin ( post 1 ) You only need the tar.
Pda in Odin 3.09 is AP
http://forum.xda-developers.com/showthread.php?p=41072377
GT-I9505 ~ SlimBean / Aosp 4.3.1
My Note 4, SM-N910F was delivered with Nordic software (NEE). As Samsung are lazy and has not bothered to update the Swedish software i flashed the UK (BTU) software and rooted and have using it some weeks. Today I wanna go back to NEE software.
But when trying to flash it using Odin 3.10 it fails and says FAIL (Ext4) and and on the phone the error message is "Volume Size is too big 81920 < 20 4000 ODIN : invalid ext4 image
Have after that tried flashing diffrent firmwares for the SM-N910F but all fails with the same message. The only firmware I can flash is the BTU one. Anyone got a clue how to fix this?
easycure1974 said:
My Note 4, SM-N910F was delivered with Nordic software (NEE). As Samsung are lazy and has not bothered to update the Swedish software i flashed the UK (BTU) software and rooted and have using it some weeks. Today I wanna go back to NEE software.
But when trying to flash it using Odin 3.10 it fails and says FAIL (Ext4) and and on the phone the error message is "Volume Size is too big 81920 < 20 4000 ODIN : invalid ext4 image
Have after that tried flashing diffrent firmwares for the SM-N910F but all fails with the same message. The only firmware I can flash is the BTU one. Anyone got a clue how to fix this?
Click to expand...
Click to collapse
What is the Android version of currently installed firmware (BTU)?
And what is the Android version of the firmwares your are attempting install?
And how did you flash the BTU on your device in the first time? With or without the PIT file?
vndnguyen said:
What is the Android version of currently installed firmware (BTU)?
And what is the Android version of the firmwares your are attempting install?
And how did you flash the BTU on your device in the first time? With or without the PIT file?
Click to expand...
Click to collapse
The one currently installed is ANK4 and I have tried ANK5 and ANK6 firmware as well as the ANJ4, the one the phone was delivered with. But all but the ANK4 fails with the same message. And the bin size in Odin is all bigger for the ones that fails. The ANK4 is the smallest.
And I flashed it with Odin but with no PIT file as that is normally not needed and there are no one available.
Hello,
I've experienced the same issue as you flashing the UK O2 Lollipop version. I fixed it by first flashing the ROM until it comes up with the error message then reboot into download mode again and flash (All samsung recovery tar)
Not sure if I can post a link to the file!!
This worked for me. I hope it works for you too.
Regards
thecrater said:
Hello,
I've experienced the same issue as you flashing the UK O2 Lollipop version. I fixed it by first flashing the ROM until it comes up with the error message then reboot into download mode again and flash (All samsung recovery tar)
Not sure if I can post a link to the file!!
This worked for me. I hope it works for you too.
Regards
Click to expand...
Click to collapse
Hi, I have the same problem with O2 version. I don't quite understand how you fixed it? When the error message comes up in ODIN you unplugged the phone then put phone into download mode again and flash with "All Samsung recovery tar" Is this a separate file? Where did you get it?
Thanks
Paul
---------- Post added at 11:53 AM ---------- Previous post was at 11:12 AM ----------
pmlfrew said:
Hi, I have the same problem with O2 version. I don't quite understand how you fixed it? When the error message comes up in ODIN you unplugged the phone then put phone into download mode again and flash with "All Samsung recovery tar" Is this a separate file? Where did you get it?
Thanks
Paul
Click to expand...
Click to collapse
Never mind figured it out. Got the file and flashed with it and Im up and runnnug again... phew
i couldn't find another thread with exactly my scenario. sorry if this is a duplicate.
i have the International SM-N900 model. it's unrooted and currently on:
Bootloader: N900XXUEBNL4
Baseband: N900DXUEBNL2
PDA: N900XXUEBNL4
CSC Version: N900OLBEBNL2
Build: LRX21V.N900XXUEBNL4
CSC Code: THL
Knox Warranty Void: 0x1
i already downloaded a 4.4.2 firmware file from sammobile:
N900XXUENJ3_N900OLBENI1_THL.zip
PDA: N900XXUENJ3
CSC: N900OLBENI1
i'm not sure what to do from here.
mrhomiec said:
i couldn't find another thread with exactly my scenario. sorry if this is a duplicate.
i have the International SM-N900 model. it's unrooted and currently on:
Bootloader: N900XXUEBNL4
Baseband: N900DXUEBNL2
PDA: N900XXUEBNL4
CSC Version: N900OLBEBNL2
Build: LRX21V.N900XXUEBNL4
CSC Code: THL
Knox Warranty Void: 0x1
i already downloaded a 4.4.2 firmware file from sammobile:
N900XXUENJ3_N900OLBENI1_THL.zip
PDA: N900XXUENJ3
CSC: N900OLBENI1
i'm not sure what to do from here.
Click to expand...
Click to collapse
hello you are on lollipop and you would downgraded to 4.4.2?
Bruno saa said:
hello you are on lollipop and you would downgraded to 4.4.2?
Click to expand...
Click to collapse
yes. that is my goal.
mrhomiec said:
yes. that is my goal.
Click to expand...
Click to collapse
download Odin V3.09 or V3.10
turn your device on download mode and connect with your computer
unpack the ZIP archive
if you have 1 file
put on AP on Odin
verify check box re-repartition are not ticked (if you have PIT file for YOUR device put his on PIT and don't untick re-repartition)
if don't have PIT file , just have Auto reboot and F. Rest time ticked
Bruno saa said:
download Odin V3.09 or V3.10
turn your device on download mode and connect with your computer
unpack the ZIP archive
if you have 1 file
put on AP on Odin
verify check box re-repartition are not ticked (if you have PIT file for YOUR device put his on PIT and don't untick re-repartition)
if don't have PIT file , just have Auto reboot and F. Rest time ticked
Click to expand...
Click to collapse
ok, the N900XXUENJ3_N900OLBENI1_THL.zip file has 2 files:
N900XXUENJ3_N900OLBENI1_N900DXUENI1_HOME.tar.md5
SS_DL.dll
i unpacked it, used the MD5 file as the AP in Odin 3.09. i only had Auto Reboot and F. Rest Time checked boxed.
i got the passed notice in Odin, but now i'm stuck on the Samsung logo. i'm going on 30 minutes waiting for it to boot.
mrhomiec said:
ok, the N900XXUENJ3_N900OLBENI1_THL.zip file has 2 files:
N900XXUENJ3_N900OLBENI1_N900DXUENI1_HOME.tar.md5
SS_DL.dll
i unpacked it, used the MD5 file as the AP in Odin 3.09. i only had Auto Reboot and F. Rest Time checked boxed.
i got the passed notice in Odin, but now i'm stuck on the Samsung logo. i'm going on 30 minutes waiting for it to boot.
Click to expand...
Click to collapse
It's stuck on samsung logo or start?
if he stuck on samsung logo
return to lollipop and tell me when it's over
Just a quick question-if you are unrooted--just how did you get to the firmware that you were on when you started the thread? That is not an OTA update, surely?
---------- Post added at 06:35 PM ---------- Previous post was at 06:33 PM ----------
mrhomiec said:
ok, the N900XXUENJ3_N900OLBENI1_THL.zip file has 2 files:
N900XXUENJ3_N900OLBENI1_N900DXUENI1_HOME.tar.md5
SS_DL.dll
i unpacked it, used the MD5 file as the AP in Odin 3.09. i only had Auto Reboot and F. Rest Time checked boxed.
i got the passed notice in Odin, but now i'm stuck on the Samsung logo. i'm going on 30 minutes waiting for it to boot.
Click to expand...
Click to collapse
Have you tried to pull the battery, reboot into Recovery, wipe user data and reboot?
haybill said:
Just a quick question-if you are unrooted--just how did you get to the firmware that you were on when you started the thread? That is not an OTA update, surely?
Have you tried to pull the battery, reboot into Recovery, wipe user data and reboot?
Click to expand...
Click to collapse
when i followed the Thailand Lollipop leak thread, it unrooted my phone. i could never get it to flash SuperSU correctly (to then fix the bluetooth issue).
i ended up just flashing the Russian official Lollipop in Odin, to get my phone working again. and it seems like this official release fixed everything i hated about Lollipop.
I'm glad to hear that.
mrhomiec said:
when i followed the Thailand Lollipop leak thread, it unrooted my phone. i could never get it to flash SuperSU correctly (to then fix the bluetooth issue).
i ended up just flashing the Russian official Lollipop in Odin, to get my phone working again. and it seems like this official release fixed everything i hated about Lollipop.
Click to expand...
Click to collapse
your problem is then resolved ?
Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
AAMIR_KH said:
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
Click to expand...
Click to collapse
What is the error?
JohnTryingToRoot said:
What is the error?
Click to expand...
Click to collapse
thanks for your reply
My phone is showing this ERROR on downloading... mode SW REV FAIL : [aboot]Fused 2 > binary 1
please tell me sir how to fix the problem
AAMIR_KH said:
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
Click to expand...
Click to collapse
Hi, so from what i understand you flash with Odin so i have Odin 3.12 you should take this one , put your phone into Download Mode and when you see your phone on odin ,click on AP and choose the xxxxxxxx.tar.md5 ,from what i know you need only AP , the rest are :
BL: your bootloader
CP: your modem
CSC: this is what features you get in some countries or carriers like Wi-Fi Calling.
Not a Pro , but that s what i can do for you
EDIT: And i don t think is a big of a problem i had some devices that were screwed by me and i gave them live again ) ,hope you make it buddy.
pantynpc said:
Hi, so from what i understand you flash with Odin so i have Odin 3.12 you should take this one , put your phone into Download Mode and when you see your phone on odin ,click on AP and choose the xxxxxxxx.tar.md5 ,from what i know you need only AP , the rest are :
BL: your bootloader
CP: your modem
CSC: this is what features you get in some countries or carriers like Wi-Fi Calling.
Not a Pro , but that s what i can do for you
EDIT: And i don t think is a big of a problem i had some devices that were screwed by me and i gave them live again ) ,hope you make it buddy.
Click to expand...
Click to collapse
As you said of the flash only AP xxxj500h.tar.m5d on I'm already tried but odin showing only one error fail Auth I'm downloaded latest firmware on sammobile website but all firmware showing same problems on my j500h
Downloading mode
SW REV FAIL : [aboot]Fused 2 > binary 1
please let me tell have any solutions to fix this problem
AAMIR_KH said:
As you said of the flash only AP xxxj500h.tar.m5d on I'm already tried but odin showing only one error fail Auth I'm downloaded latest firmware on sammobile website but all firmware showing same problems on my j500h
Downloading mode
SW REV FAIL : [aboot]Fused 2 > binary 1
please let me tell have any solutions to fix this problem
Click to expand...
Click to collapse
Make sure you just choose the CSC, PA and cache to flash thru odin dont try to flash the BL that is what will cause the revision check error.
Don't use from sammobile. Use one from the xda threads.
Maybe check ,idk if u will find something important... : https://forum.xda-developers.com/showthread.php?t=2785363