Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
AAMIR_KH said:
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
Click to expand...
Click to collapse
What is the error?
JohnTryingToRoot said:
What is the error?
Click to expand...
Click to collapse
thanks for your reply
My phone is showing this ERROR on downloading... mode SW REV FAIL : [aboot]Fused 2 > binary 1
please tell me sir how to fix the problem
AAMIR_KH said:
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
Click to expand...
Click to collapse
Hi, so from what i understand you flash with Odin so i have Odin 3.12 you should take this one , put your phone into Download Mode and when you see your phone on odin ,click on AP and choose the xxxxxxxx.tar.md5 ,from what i know you need only AP , the rest are :
BL: your bootloader
CP: your modem
CSC: this is what features you get in some countries or carriers like Wi-Fi Calling.
Not a Pro , but that s what i can do for you
EDIT: And i don t think is a big of a problem i had some devices that were screwed by me and i gave them live again ) ,hope you make it buddy.
pantynpc said:
Hi, so from what i understand you flash with Odin so i have Odin 3.12 you should take this one , put your phone into Download Mode and when you see your phone on odin ,click on AP and choose the xxxxxxxx.tar.md5 ,from what i know you need only AP , the rest are :
BL: your bootloader
CP: your modem
CSC: this is what features you get in some countries or carriers like Wi-Fi Calling.
Not a Pro , but that s what i can do for you
EDIT: And i don t think is a big of a problem i had some devices that were screwed by me and i gave them live again ) ,hope you make it buddy.
Click to expand...
Click to collapse
As you said of the flash only AP xxxj500h.tar.m5d on I'm already tried but odin showing only one error fail Auth I'm downloaded latest firmware on sammobile website but all firmware showing same problems on my j500h
Downloading mode
SW REV FAIL : [aboot]Fused 2 > binary 1
please let me tell have any solutions to fix this problem
AAMIR_KH said:
As you said of the flash only AP xxxj500h.tar.m5d on I'm already tried but odin showing only one error fail Auth I'm downloaded latest firmware on sammobile website but all firmware showing same problems on my j500h
Downloading mode
SW REV FAIL : [aboot]Fused 2 > binary 1
please let me tell have any solutions to fix this problem
Click to expand...
Click to collapse
Make sure you just choose the CSC, PA and cache to flash thru odin dont try to flash the BL that is what will cause the revision check error.
Don't use from sammobile. Use one from the xda threads.
Maybe check ,idk if u will find something important... : https://forum.xda-developers.com/showthread.php?t=2785363
Related
Hello,
I've tried to flash my GN3 with the ITA nobrand MK2 firmware.
Odin gave an error after few minutes the fash started.
The phone is stucked now with this error:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I've tried with kies unsuccessfully.
Can you help me ?
Thank you.
flegius said:
Hello,
I've tried to flash my GN3 with the ITA nobrand MK2 firmware.
Odin gave an error after few minutes the fash started.
The phone is stucked now with this error:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I've tried with kies unsuccessfully.
Can you help me ?
Thank you.
Click to expand...
Click to collapse
Are you able to flash any other stock firmware via ODIN? Also try flashing with ODIN 3.09
flegius said:
Hello,
I've tried to flash my GN3 with the ITA nobrand MK2 firmware.
Odin gave an error after few minutes the fash started.
The phone is stucked now with this error:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I've tried with kies unsuccessfully.
Can you help me ?
Thank you.
Click to expand...
Click to collapse
Try download an MJ7 firmware and try again in download mode with odin.
aoneda Clara
Markudsc said:
Try download an MJ7 firmware and try again in download mode with odin.
Click to expand...
Click to collapse
Hello,
I haven't tried to flash any other firmware.
I bought the phone in hong kong and the old firmaware was:
Product Code: TGY
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
When I tried to flash the new firmware I got the following DOIN error:
ODIN: ext4 image file failed.
I'm downloading the BMI7 firmware as it is the old one.
I'll try to flash an MJ7 before.
Thank you.
polish_pat said:
Are you able to flash any other stock firmware via ODIN? Also try flashing with ODIN 3.09
Click to expand...
Click to collapse
I'm using Odin3 v 3.09
Can I use any MJ7 firmware or I have to use a specific product code like BTU ?
Thank you.
Markudsc said:
Try download an MJ7 firmware and try again in download mode with odin.
Click to expand...
Click to collapse
When I flash via Odin, I have ti specify only the AP or I have to also specify CSC and CP ?
Thank you.
Markudsc said:
Try download an MJ7 firmware and try again in download mode with odin.
Click to expand...
Click to collapse
Hello,
I've tried to download the MJ7 BTU firmware and i tried to flash it via ODIN and I always get this error:
ODIN: Invalid ext4 image
What can i do now?
Do you have any suggestions ?
Thank you.
flegius said:
When I flash via Odin, I have ti specify only the AP or I have to also specify CSC and CP ?
Thank you.
Click to expand...
Click to collapse
Every time when i flash the device with odin i just use the file firmware tar.md5 in AP
No need to specify other, but you can try if your problem persists, :-$
You have been tried a custom rom or just tried a simple update stock rom on your device?
---------- Post added 11th February 2014 at 12:05 AM ---------- Previous post was 10th February 2014 at 11:54 PM ----------
flegius said:
Hello,
I've tried to download the MJ7 BTU firmware and i tried to flash it via ODIN and I always get this error:
ODIN: Invalid ext4 image
What can i do now?
Do you have any suggestions ?
Thank you.
Click to expand...
Click to collapse
Hi again,
look, for your device TGY in sammobile have a firmware MK1 of 10 November 2013 maybe you try to download once this is the latest firmware for your country device
and try one more time, i no longer more ideas, but you can try, unzip the file and put in AP in v3.09 Odin or use the v1.85 Odin and put the file in PHONE. (Flash reset time and auto reboot ticked)
Here is the link in sammobile
http://www.sammobile.com/firmwares/2/
Markudsc said:
Every time when i flash the device with odin i just use the file firmware tar.md5 in AP
No need to specify other, but you can try if your problem persists, :-$
You have been tried a custom rom or just tried a simple update stock rom on your device?
---------- Post added 11th February 2014 at 12:05 AM ---------- Previous post was 10th February 2014 at 11:54 PM ----------
Hi again,
look, for your device TGY in sammobile have a firmware MK1 of 10 November 2013 maybe you try to download once this is the latest firmware for your country device
and try one more time, i no longer more ideas, but you can try, unzip the file and put in AP in v3.09 Odin or use the v1.85 Odin and put the file in PHONE. (Flash reset time and auto reboot ticked)
Here is the link in sammobile
http://www.sammobile.com/firmwares/2/
Click to expand...
Click to collapse
Hi Guys,
I downloaded the latest stock rom TGY MK1
It worked fine.
I wonder if there is any possibility to flash some european roms.
What is important now is that I have my phone working.
Thank you very much.
flegius said:
Hi Guys,
I downloaded the latest stock rom TGY MK1
It worked fine.
I wonder if there is any possibility to flash some european roms.
What is important now is that I have my phone working.
Thank you very much.
Click to expand...
Click to collapse
I'm glad to help you to solve your problem
i have research in forum and hong kong devices and european roms just pranked
but for everything exists a solution
Maybe later you could try one european rom and will be succeeded.
Hi brother ..I just download firmware ..S5360DDMD1_S5360ODDMD1_INU.zip .. http :// samsung-updates. com/ device/?id=GT-S5360 (India)
But inside the file not include pit file boot loader csc etc ...
I just just fund 2 file 1 is S5360DDMD1_S5360ODDMD1_S5360DDMD1_HOME.tar.md5
2nd file SS_DL.dll
so my question how I update firmware through odin ...
caused don't have .. pit file boot loader csc etc ..
Need ur help/
ty .
never flash the boot loader or pit file through odin unless it is actually needed (most the time it isnt) - if you do it wrong your phone will be dead
all you need is phone modem and csc
firmware from sammobile must be split into phone modem and csc in order to flash it via odin as galaxy y doesnt support single file flashing
you have two choice
1 - goto my firmware thread as iv already done ddmd1
http://forum.xda-developers.com/showthread.php?t=2568853
2- split firmware yourself using my guide
http://forum.xda-developers.com/showthread.php?p=49543982
with odin 3.07 its no problem to flash single ones
marcussmith2626 said:
never flash the boot loader or pit file through odin unless it is actually needed (most the time it isnt) - if you do it wrong your phone will be dead
all you need is phone modem and csc
firmware from sammobile must be split into phone modem and csc in order to flash it via odin as galaxy y doesnt support single file flashing
you have two choice
1 - goto my firmware thread as iv already done ddmd1
http://forum.xda-developers.com/showthread.php?t=2568853
2- split firmware yourself using my guide
http://forum.xda-developers.com/showthread.php?p=49543982
Click to expand...
Click to collapse
thx my problem solved ..
Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance
Hi,
i am trying to fix software on my note3 but i have problems finding the right files.
There is Bootloader, PDA, CSC and Baseband but i don't know how to upgrade it to the correct versions.
For example i found Version OK9 here: http://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803
But there is no file to update PDA, CSC and Baseband?
I installed the KERNEL file and it changed the Kernel. Did not try RECOVERY yet because i think it could overwrite the Custom Recovery TWRP that is installed now.
In older post i also found some "CP" files for OJ6 and OK6 and they installed new version for PDA but i can not find them for OK9?
Can anybody please explain the different files and how to find the right versions?
I downloaded two files to update bootloader and PDA to OK6 but i can only update the Bootloader but PDA Version does not change.
CP_N9005_OK6.tar.md5
BL_N9005_OK6.tar.md5
The first file is supposed to update the PDA or not?
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
kuitsu said:
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
Click to expand...
Click to collapse
Ah i see, thx for your help!
Hm so maybe it could be a good idea to install a untouched Stock Rom first and then go to modified image?
I have now installed N9005XXUGBOK6_N9005DBTGBOI1_DBT Stock Image with Odin.
When i want to go back to this image: http://forum.xda-developers.com/galaxy-note-3/development/rom-lp-tw-rom-t3027148 is it enought to just install it or do i need to wipe anything before?
I don't want all the samsung adware...
Oh it even killed the philz touch recovery...
kuitsu said:
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
Click to expand...
Click to collapse
how to flash only this PDA/AP & Bootloader via odin?
BL ver : A515FXXU3BTI2
AP Ver : A515FXXU3BTI2
Neither of those are for Note 3 based upon what you have posted .
BL in bl section AP in ap section on Odin .
Hello,
Today I tried to flash KING OF NOUGAT v13 but my phone got stacked on Samsung Logo(+30min). I was forced to restart it(Power+Volume Up) and flash the recovery that made before flashing. To my surprise when the phone boot there was no connection(only Wi-FI). As far as I can see IMEI, Bluetooth and Mac address are unavailable. I tried different backup(I have two on SD card) but the problem was the same.
When I created the backup I made a full backup including EFC, but for some reason, it's not working.
I also tried this article , and put those commands in the terminal but no result.
I know there is an option to fix it if I flash the stock rom . But i would like to know if there is another options
there is sticky thread with info how to get imei back, so just read and follow
yaro666 said:
there is sticky thread with info how to get imei back, so just read and follow
Click to expand...
Click to collapse
Actually, the problem was the the Bl and Cp, After I flashed the latest everything workout
Can you please share the link to the latest BL and CP ...i am facing the same issue after flashing the leaked oreo update...and i cant flash older BL verrsions anymore,and i cant use any sim either....
download the newest rom and extract it yourself, easy as unpacking
yaro666 said:
download the newest rom and extract it yourself, easy as unpacking
Click to expand...
Click to collapse
I tried but it still shows this error
SW REV check fail device 2 binary 1
it flashed without any bl other ap cp and csc but gives error while flashing the BL file....did u flash the nougat BL file,or any other one ?
Sariful Alam Fahad said:
I tried but it still shows this error
SW REV check fail device 2 binary 1
it flashed without any bl other ap cp and csc but gives error while flashing the BL file....did u flash the nougat BL file,or any other one ?
Click to expand...
Click to collapse
same here i downloaded the latest version i could find and i cant flash the bootloader and flashing CP doesnt fix anything