Database Users

[Q] Grand 2 Duos SM-G7106 does not enter download mode

Hello,
A customer gave a Grand 2 (SM-G7106) for service, to have a custom rom & recovery installed.
I've been trying to use the method that's available in all the forums (put the phone to download mode, connect it to odin & etc...).
But the phone does not go into download mode in the first place for some reason.
Rather, when I keep holding Vol Down + Home + Power (or Vol Down + Power only) , a screen flashes to say 'Factory mode' for like 2 secs & then, I get these options
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, I tried, Vol Up + Power & I get these options
Please give me a solution to this.
Thanking you all in advance,

bro...
which andriod version he izz using??

haneef95 said:
Hello,
A customer gave a Grand 2 (SM-G7106) for service, to have a custom rom & recovery installed.
I've been trying to use the method that's available in all the forums (put the phone to download mode, connect it to odin & etc...).
But the phone does not go into download mode in the first place for some reason.
Rather, when I keep holding Vol Down + Home + Power (or Vol Down + Power only) , a screen flashes to say 'Factory mode' for like 2 secs & then, I get these options
So, I tried, Vol Up + Power & I get these options
Please give me a solution to this.
Thanking you all in advance,
Click to expand...
Click to collapse
I think its not the original set it must high copy so its not going to the download mode .

Andriod version
PKothavale said:
which andriod version he izz using??
Click to expand...
Click to collapse
4.4.X, can't remember what that X was!

kemesh said:
I think its not the original set it must high copy so its not going to the download mode .
Click to expand...
Click to collapse
Not sure, it only came for service.
How do I distinguish between original & duplicate?
Even then, is there any solution to this problem though?

haneef95 said:
Not sure, it only came for service.
How do I distinguish between original & duplicate?
Even then, is there any solution to this problem though?
Click to expand...
Click to collapse
If its an 4.4.X version then u can use balliboxer's new kikat superior rom u can directly insatll it from recovery mode/install a zip...but bro if it doesnt has base of version 4.4.x be aware device can be bricked...
---------- Post added at 11:56 AM ---------- Previous post was at 11:39 AM ----------
PKothavale said:
If its an 4.4.X version then u can use balliboxer's new kikat superior rom u can directly insatll it from recovery mode/install a zip...but bro if it doesnt has base of version 4.4.x be aware device can be bricked...
Click to expand...
Click to collapse
And Be aware if it gets any error dont downgrade it again to 4.3 aware !!! it will make ur device hard brick...

Hey buddies,
I got a 4.3 Samsung SM-G7106, with G7106ZNUANK1 from China Unicom (CHU). unfortunately, I can't root it properly. Tried CF-Root, TowelRoot and Framaroot but no luck.
I hope you can help me out guys, thanks!

May be it is super copy for grand 2,,try to chek with cpu identifier or cpu z,,
Sent from my SM-G7102

Nah, its not a supercopy, just found out that one of my friend was also using the same phone, same specs, same everything and he bought it on Samsung Store in China (He presented me with the copy of the receipt and box stuffs), so yeah, I think its a legit one since its running well on Kies also (unlike other copy phones which can't be detected thru Kies). Anyway, I found a root program from G7106ZNUANC1 and I forgot the other one, its thru SRS root, but didnt work for my phone unfortunately. :crying:
Hope someone could help me root my G7106ZNUANK1 soon!

chopsuey8 said:
Nah, its not a supercopy, just found out that one of my friend was also using the same phone, same specs, same everything and he bought it on Samsung Store in China (He presented me with the copy of the receipt and box stuffs), so yeah, I think its a legit one since its running well on Kies also (unlike other copy phones which can't be detected thru Kies). Anyway, I found a root program from G7106ZNUANC1 and I forgot the other one, its thru SRS root, but didnt work for my phone unfortunately. :crying:
Hope someone could help me root my G7106ZNUANK1 soon!
Click to expand...
Click to collapse
Flash CWM or TWRP through odin..den flash su binaru 2.45 from recovery. su binary 2.45 available in chainfire site.Gud Luck

prakash87 said:
Flash CWM or TWRP through odin..den flash su binaru 2.45 from recovery. su binary 2.45 available in chainfire site.Gud Luck
Click to expand...
Click to collapse
Thanks for the tutorial buddy! Is it possible you can walk me thru it? Even though I'm kinda lurking here for quite some time, still some things are alien to me. I hate to say this, but, can you spoon-feed me the instructions in doing so? Would really appreciate your help!
Thanks! :good:

Hi.
I just got also a Grand 2 G7106, and does the same thing - chinese menus instead of recovery mode. Found a video on youtube that explained which single item does, and most are only a bunch of tests, and one for factory reset, but still with this same issue.
I also would like to know how to use odin without entering in download mode.

sacp said:
Hi.
I just got also a Grand 2 G7106, and does the same thing - chinese menus instead of recovery mode. Found a video on youtube that explained which single item does, and most are only a bunch of tests, and one for factory reset, but still with this same issue.
I also would like to know how to use odin without entering in download mode.
Click to expand...
Click to collapse
Hey buddy, try using SRS root software if you wanted to root your phone. If you're lucky enough that its not the G7106znuank1 model, then it can be rooted thru it. Otherwise, you'll be stuck like me. lol.. good luck! :good:

looks like i am stuck with you guys too. Have the same Samsung SM-G7106 . I tried using ODIN to install CWM. Despite Odin saying that it is PASS and device rebooted itself, when i try to go into recovery mode (CWM) it goes into default Android recovery mode instead with (write protected) ... i tried TWRP too using ODIN and it is not working. Tried both Odin 3.09 and 3.10

If you're still looking for a way to root your SM-G7106, I managed to do it with the KingoRoot app.
super simple process. It's based on Chainfire.
I should mention this was with: G7106znuank1

I have a grand 2 g7106 hard bricked and it is totally dead how to solve this problem please help.
Thanks in advance

A Beginner's Guide To Installing A Custom ROM

In this tutorial I am just going to be covering how to install a ROM and how to install TWRP. Before we start this, you are going to need THESE files. You will be taken to MEGA to download the files. You will also need to download the Samsung USB Drivers. This guide is going to be in a Step-By-Step format so should be very easy for everyone to follow.
Step 1: Download the files that are linked above and extract them all to a location that is best for you,
-Make sure you have WinRAR or 7-Zip, just to be safe, use THIS website to download either WinRAR or 7-Zip.
-For example, I extracted the files to "I:\XDA ROM Files".
Step 2: Enter the folder by the name of "Odin3 v3.12.3" and open "Odin3.exe",
-You will need this for later on in the tutorial, so just leave it open.
Step 3: You will now need to boot your Galaxy S3 into "Odin Mode", also known as "Download Mode" by doing the following steps:
Power Off Your Device,
Power Back On Your Device Using "Power Button + Home Button + Volume Down",
Release When You See The Boot Screen,
You Will See A Disclaimer,
Press 'Volume Up'.
Step 4: Plug your phone directly into your computer / laptop,
-Make sure that you have got the drivers downloaded, if not, download them.
-The phone should appear in Odin as a Com X port.
Step 5: Return to Odin3,
-Uncheck everything except f reset time in Odin. If you leave auto reboot on when flashing twrp, the phone will reboot and it will replace twrp with stock recovery upon automatic reboot.
Unchecking auto reboot, removing battery etc. and manually booting into twrp after flashing will ensure twrp will stick and stick recovery will not return on reboot.
Step 6: Click "AP" and find the following file "TWRP 3.0.2-1.tar" and click start,
-This should start installing TWRP to your device and you should see a progress bar on Odin3 and on your phone.
-After installation, your phone should reboot.
Step 7: Allow your phone to fully boot and load,
-Make sure your phone is still plugged in.
Step 8: When you have selected a ROM, download it.
-The ROM should be a ZIP file,
-Transfer the ZIP file to your "Download" folder on your phone.
Step 9: We are now going to install the ROM, follow the next steps very carefully,
Power Off Your Device,
Use The Following Keys To Boot Your Device,
Power Button + Home Button + Volume Up,
You Will Be Prompted With TWRP Recovery,
Click "Install"
You Should Now Be Prompted With Your Internal Storage Folders,
Go Into Your Downloads And Find The ROM,
Install The ROM.
That is it. You now have a custom ROM on your phone. Please leave some support if I have done anything incorrect. If you need any help please feel free to message me! Thanks guys, I hope you enjoy my first post. I am trying to hardest to make a commitment to this community.

Just a quick little thing from me, if you need any help then just give me a PM and I will help you the best I can

Which ROM is the best for you with S3?

Nikola Gataric said:
Which ROM is the best for you with S3?
Click to expand...
Click to collapse
I use Ressurection Remix on my S3 at the moment and it runs pretty smooth for me, so I would advise that

MamaROM said:
I use Ressurection Remix on my S3 at the moment and it runs pretty smooth for me, so I would advise that
Click to expand...
Click to collapse
Can't find ROM on TWRP.. I've unzipped it

Nikola Gataric said:
Can't find ROM on TWRP.. I've unzipped it
Click to expand...
Click to collapse
Private message me, will assist further

Don't unzip the ROM before flashing. If you unzip, you'll get a bunch of other folders which TWRP can't flash individually.

Now my S3 i9300 can't recognize my paid SIM card, but it can all others SIM cards., also my paid one works on others phones.. any solutions?
gapps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nikola Gataric said:
Now my S3 i9300 can't recognize my paid SIM card, but it can all others SIM cards., also my paid one works on others phones.. any solutions?
gapps
Click to expand...
Click to collapse
Hey, what provider is your SIM?

MamaROM said:
Hey, what provider is your SIM?
Click to expand...
Click to collapse
MTS Telekom, Serbia

Nikola Gataric said:
MTS Telekom, Serbia
Click to expand...
Click to collapse
Okay, I will have a look around as I have no clue why it isn't working

Is the 9300 running the latest bootloader and modem?

MamaROM said:
Okay, I will have a look around as I have no clue why it isn't working
Click to expand...
Click to collapse
Fixed problem, it was probably firmware problem, but i changed rom too. I used firware for my country from sammobile

Nikola Gataric said:
Fixed problem, it was probably firmware problem, but i changed rom too. I used firware for my country from sammobile
Click to expand...
Click to collapse
Ah fair enough, well done man, I couldn't find a fix, sorry

Ok it seems i haven't solve problem, because phone still can't recognize my paid sim card (it did for 2-3 hours, but then again problem), so one member suggested my to flash new rom but without custom kernel and now after advanced wipe in twrp (system, data, cache, dalvik cache) usb from mobile to computer doesn't work, any solutions?

Asus zenfone go zb551kl rooting (working & tested)

So lets get started already. First of all I'm not the one who discovered this method. credits to this person Angelito Cristobal.
Things needed.
MICRO SD at least 2gb
Of course Asus Zenfone Go 5.5 ZB551KL
Old Firmware of Asus
Latest Version of KingRoot
BEFORE YOU GO FURTHER. MAKE SURE YOU ALREADY BACK UP YOUR FILES.
This method is just, going back to the old firmware that has rooting vulnerability.
1) Download the old firmware to this link http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZB551KL/UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip
If the link doesnt work try looking here https://www.asus.com/support/Download/39/2/0/16/xKn9nXyUA5DhW70G/32/ The name of the firmware is something like this UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip
2)Put the old firmware or UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip to the microsd
*after that. Go to Recovery Mode. Press together Power Button + Down Volume . Hold it until the Asus Logo Shows up. (My own method, that works for me is after the Logo shows up, i spam press,not holdPower Button + Down Volume)
3)Wipe Data Reset and Cache (Just make sure you wipe the internal storage not the microsd)
*to select the update. Use Volume up or volume down to go to your file target. Then hit power button to choose your file.
4) After Wiping,Apply Update From SD Card just wait... after it finished just reboot. Then you downgraded the firmware! Go set it up
5) We'll be using kingroot. Because this is the one that works. Here is the latest link https://forum.xda-developers.com/devdb/project/dl/?id=23923
6) Then your good to go! Credits again to Angelito Cristobal.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Juanmanarmy said:
So lets get started already. First of all I'm not the one who discovered this method. credits to this person Angelito Cristobal.
Things needed.
MICRO SD at least 2gb
Of course Asus Zenfone Go 5.5 ZB551KL
Old Firmware of Asus
Latest Version of KingRoot
BEFORE YOU GO FURTHER. MAKE SURE YOU ALREADY BACK UP YOUR FILES.
This method is just, going back to the old firmware that has rooting vulnerability.
1) Download the old firmware to this link http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZB551KL/UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip
If the link doesnt work try looking here https://www.asus.com/support/Download/39/2/0/16/xKn9nXyUA5DhW70G/32/ The name of the firmware is something like this UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip
2)Put the old firmware or UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip to the microsd
3)Wipe Data Reset and Cache (Just make sure you wipe the internal storage not the microsd)
4) After Wiping,Apply Update From SD Card just wait... after it finished just reboot. Then you downgraded the firmware! Go set it up
5) We'll be using kingroot. Because this is the one that works. Here is the latest link https://forum.xda-developers.com/devdb/project/dl/?id=23923
6) Then your good to go! Credits again to Angelito Cristobal.
Click to expand...
Click to collapse
Thanks, its working! :good:

Juanmanarmy said:
So lets get started already. First of all I'm not the one who discovered this method. credits to this person Angelito Cristobal.
Things needed.
MICRO SD at least 2gb
Of course Asus Zenfone Go 5.5 ZB551KL
Old Firmware of Asus
Latest Version of KingRoot
BEFORE YOU GO FURTHER. MAKE SURE YOU ALREADY BACK UP YOUR FILES.
This method is just, going back to the old firmware that has rooting vulnerability.
1) Download the old firmware to this link http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZB551KL/UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip
If the link doesnt work try looking here https://www.asus.com/support/Download/39/2/0/16/xKn9nXyUA5DhW70G/32/ The name of the firmware is something like this UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip
2)Put the old firmware or UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip to the microsd
3)Wipe Data Reset and Cache (Just make sure you wipe the internal storage not the microsd)
4) After Wiping,Apply Update From SD Card just wait... after it finished just reboot. Then you downgraded the firmware! Go set it up
5) We'll be using kingroot. Because this is the one that works. Here is the latest link https://forum.xda-developers.com/devdb/project/dl/?id=23923
6) Then your good to go! Credits again to Angelito Cristobal.
Click to expand...
Click to collapse
Thank you ! Its working 100%

Thank you!
Juanmanarmy said:
So lets get started already. First of all I'm not the one who discovered this method. credits to this person Angelito Cristobal.
Things needed.
MICRO SD at least 2gb
Of course Asus Zenfone Go 5.5 ZB551KL
Old Firmware of Asus
Latest Version of KingRoot
BEFORE YOU GO FURTHER. MAKE SURE YOU ALREADY BACK UP YOUR FILES.
This method is just, going back to the old firmware that has rooting vulnerability.
1) Download the old firmware to this link http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZB551KL/UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip
If the link doesnt work try looking here https://www.asus.com/support/Download/39/2/0/16/xKn9nXyUA5DhW70G/32/ The name of the firmware is something like this UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip
2)Put the old firmware or UL-ASUS_ZB551KL-WW-13.2.8.13-user.zip to the microsd
*after that. Go to Recovery Mode. Press together Power Button + Down Volume . Hold it until the Asus Logo Shows up. (My own method, that works for me is after the Logo shows up, i spam press,not holdPower Button + Down Volume)
3)Wipe Data Reset and Cache (Just make sure you wipe the internal storage not the microsd)
*to select the update. Use Volume up or volume down to go to your file target. Then hit power button to choose your file.
4) After Wiping,Apply Update From SD Card just wait... after it finished just reboot. Then you downgraded the firmware! Go set it up
5) We'll be using kingroot. Because this is the one that works. Here is the latest link https://forum.xda-developers.com/devdb/project/dl/?id=23923
6) Then your good to go! Credits again to Angelito Cristobal.
Click to expand...
Click to collapse
After rooting can I upgrade to the latest version through recovery mode?

Sorry but no.
Sherlock7: said:
After rooting can I upgrade to the latest version through recovery mode?
Click to expand...
Click to collapse
I tried to upgrade mine but ididnt work.

Any twrp or cwm recovery available?

not working
ACFH said:
https://drive.google.com/open?id=0B-qHJr9eopxNU0pnSWtvakpfSVk
This twrp work with zb500kl. And I wonder if it work with zb551kl (Im not using zb551kl now). Just give it a try and tell me. Do this
Code:
fastboot boot twrp.img
It will temporary run on your phone so you dont get softbrick if it fail.
Click to expand...
Click to collapse
sorry to tell but using fastboot in zb551kl is not working because you need to unlock its oem unlock. And unlocking oem unlocking is not available in zb551kl

Not yet
donkeyman1234 said:
Any twrp or cwm recovery available?
Click to expand...
Click to collapse
Some of the developers in other groups are still running some test. I'll get back to you when they release the official twrp recovery

Thanks a lot! I'll be waiting.

recovery twrp ZB551KL
Juanmanarmy said:
Some of the developers in other groups are still running some test. I'll get back to you when they release the official twrp recovery
Click to expand...
Click to collapse
Did you find the img recovery for the ZB551KL ?? I did not ever find it on the internet

It will not work..
IT won't work coz zb551kl need to unlock bootloader..unfortunately no luck.

stryker1968 said:
IT won't work coz zb551kl need to unlock bootloader..unfortunately no luck.
Click to expand...
Click to collapse
Have they found any method to unlock the bootloader? (Excuse my english but i'm italian and use g translator: D

Why notworking

Zenfone ZB500KL
Guys, does this root works with zb500kl ? Also will rooting it enable apps to go on SD card ? My phone is using marshmallow os (6.0.1) and it doesnt support app2sd, can i downgrade it somehow to 5.x or upgrade to 7.x if rooting wont fix app2sd problem ? Thanks for replies in advance.

Work fine!!

Hi guys, my ZB551KL no start, no logo only vibrate. Only access is in fastboot, but no write beacuse is bootloader is lock!! Please help me, if possibile?

Hey
Can anyone convert zb551kl in Volte

This thread is death!

lizz said:
This thread is death!
Click to expand...
Click to collapse
what do you think about it can we convert LTE to VOLTE.
And can you tell me how to root zb551kl

[Guide] How to ROOT + TWRP + Install Nougat on Canadian LG D852

*** Important: Your Warranty Is now Void. Always take a Nandroid backup. I am not responsible if you damage your phone or lose any data***
Hello everyone. I created this guide for the Canadian D852 since I didn’t find anything that was straight forward. Credit goes to all the developers who made it possible for us to keep using our beloved LG G3.
This is my first attempt to create and share a guide. I hope it will be useful to other users. If you find any error or have suggestions, please send me a message.
Download all the files before you begin. Do not forget to copy your ROM and GAPPS to your SDCARD before you install TWRP.
Go back to Lollipop using LGUP **Always use USB 2 port. It won't work with USB3**:
Download your kdz (d85220… not d85230). I downloaded mine from:
https://lg-firmwares.com/lg-d852-firmwares/
Follow these instructions (works with D852 don’t worry):
https://forum.xda-developers.com/showpost.php?p=64624353&postcount=3
Choose the kdz from your provider. For example, I have an unlocked Fido phone but I want to use it with Bell. So I used the Bell 20k KDZ.
When selecting a file to flash, type *.* and press Enter in the filename for your .kdz to show up. If you do not, it will only show .tot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Root your phone using this method:
Enable ADB debugging.
Unplug usb cable.
Go to Settings > About Phone > Software Information and tap build number until you are presented with "You are now a developer".
Back to Settings screen.
In Developer Options, enable USB Debugging.
Connect usb cable.
Click OK when asked to allow USB debugging in android.
I use the root.bat method. If it doesn’t work go back to step 1 and try again.
https://forum.xda-developers.com/lg-g3/general/guide-root-method-lg-devices-t3129197
Install TWRP using Autorec:
Copy the rom and GAPPS to your SDCARD before you install TWRP.
Download the file from here:
https://mega.nz/#F!rtI1naZT!LJIKUVpv8fYjrvhpykA4_A!2o433RBZ
Transfer the file to you internal or external SD card.
Head in to Settings -> General -> Security, then scroll down until you see Unknown sources. Tick the checkbox, then hit OK on the next prompt.
Install APK via the file manager.
Open App.
Grant root access.
Wait a few seconds while it does some backup.
Wait for prompt to say that it is ready to flash.
Click the button to Flash TWRP.
Wait for it to be done.
Phone will reboot into TWRP
Update TWRP to the latest version if you want.
Download and install Nougat rom. Tested with CrDroid v3.6 and open_gapps-arm-7.1-nano.
https://forum.xda-developers.com/lg-g3/development/rom-crdroid-t2955012
http://opengapps.org/
**I’m not sure if it’s necessary but I did it anyway** Flash Dene Hybrid Baseband via TWRP (don’t forget to wipe cache and dalvik after) if necessary (mobile data is unstable etc…).
https://mega.nz/#F!rtI1naZT!LJIKUVpv8fYjrvhpykA4_A!2tJFBLLK
Source: https://forum.xda-developers.com/lg-g3/development/canadian-d852-stock-bumped-rooted-rom-t3056843
That’s it! Enjoy Android Nougat!
N.B. That is the only way I was able to get a stable mobile data connection. Only flashing baseband did not work for me.

Thanks, barguin, for a very informative thread.
How is the battery life on this Nougat ROM? I will be switching from Fulmics MM, and my provider is Fido.

Battery is very good. I can do a full day easyly.
Regards!

@barguin: thanks for the quick response. Did you try Exposed for Nougat? I know that Exposed is frowned upon in the CrDroid thread, but there are a couple of modules I would like to try. Thanks.

I do not use exposed...sorry.

Thx
You saved my pitiful unrooted D852! Thxsm

Officeryanki said:
You saved my pitiful unrooted D852! Thxsm
Click to expand...
Click to collapse
Happy to hear that

Btw
Can i flash with lg flash tool? And also if im flashing with lgup do i go into download mode

Officeryanki said:
Can i flash with lg flash tool? And also if im flashing with lgup do i go into download mode
Click to expand...
Click to collapse
Personally I had some problems with lg flash tool.
There is no need to enter download mode! LGUP will do it for you.

I read the heading in this thread and it said something about not downloading the D85230 file .. and my phone is D8530g as shown in the screenshot .. so is the D85220 file gonna damage my phone .... Sorry for the newbie question !
Sent from my LG-D852 using XDA Free mobile app

The D85220 file will not damage your phone. Instead, that file will install an older Android version on your phone, namely Lollipop (this step is required to gain root). You are currently on Android Marshmallow, and you will end up with Android Nougat if you complete all steps correctly. The procedure is meant to work like this, one step back, two steps forward.
The "20" or "30" in the file names (on that website hosting KDZs) have the following meaning:
"20" = it's a Lollipop file
"30" = it's a Marshmallow file
"40" = it's a Nougat file (I can only wish, there is no such Nougat file).
But seriously, the procedure requires more than a modicum of familiarity with flashing and with using various pieces of software. There is potential for bricking your phone.
No offense, but, judging from your question, I would suggest that you should enlist the help of a friend who is a bit more knowledgeable on this topic.

Guys .. Can I use the ROM on D855?! If not, so how to flash the ROM without getting any issues?!!
Thanks.

Do not flash the rom on the D855 it's only for the canadian variant.

Did this on my d852 and it's stuck booting on Oreo, Nougat, and stock Lollipop. Happened after I installed TWRP, any fixes?
edit: i think it was the roms.. got 3 bad ones i guess lol. fulmics worked.

Just an FYI, I followed the LGUP instruction for my Bell D852 but it was soft bricked, doing the flash using "refurbish" instead of "upgrade" did it for me and I was able to finish rooting my device!

How to root symphony i60.... please reply me

my phone no sound
I do not hear sound from my phone after installing CRDroid. the programs are working. YouTube is opening but I can not hear the sound of the media being played.
I do not hear the sound of the media played when I plug in the phone.
please help me.

Thanks alot man, this was super handy!
Edit: Seems I've got that problem where shutting the phone off bugs it and it won't turn back on unless you remove the battery and put it back in. It also resets the time. Kind of annoying. Seems to happen to some D852s after installing TWRP.

[SOLVED, APN] No mobile network connection on LG V20 H990DS

I SOLVED IT JUST BY CONFIGURING AN APN. IT WAS TRIVIAL ALL ALONG, I'M A ****ING DUMBASS
Hi ya'll,
Yesterday I got me a V20 H990DS and proceeded to unlock it with dirtysanta.
I soon noticed I can't connect to the mobile network at all (network status is disconnected, always). Everything else works ok, SMS, Wifi, calls.
I flashed back to stock using a kdz and the problem remains the same. I have a couple of ideas as for what to do next:
Flash the modem: I remember having the same problem with my LG G4, all I had to do was to flash the appropriate modem. I don't know how to flash modems or where to get them though.
Flash the correct kdz: the packaging and an IMEI checker both state the phone is AUS and I might have flashed a wrong version of it. Another IMEI checker claims it belongs to the ABC region (?). Frankly, I don't think it even matters.
Use the secret menu to fix some network configurations: I know absolutely nothing about it so you'd have to guide me.
The bottom line is, I need help, please.

Flash this using LGUP and use only Partition Download option.
https://lg-firmwares.com/downloads-file/4345/H990ds10b_00_OPEN_ESA_DS_OP_1102.kdz
You will get Blue screen saying phone reset status 2.
Then go to download mode again and flash Indian version v10j available on the same website.
Use same Partition Download option this time also.
Once successfully flashed... Phone gets its signals.
Try this and update
Cheers
https://lg-firmwares.com/downloads-file/4345/H990ds10b_00_OPEN_ESA_DS_OP_1102.kdz
https://lg-firmwares.com/downloads-file/10637/H990ds10j_00_OPEN_ESA_DS_OP_0923.kdz

DroneJC said:
Flash this using LGUP and use only Partition Download option.
You will get Blue screen saying phone reset status 2.
Then go to download mode again and flash Indian version v10j available on the same website.
Use same Partition Download option this time also.
Once successfully flashed... Phone gets its signals.
Try this and update
Cheers
Click to expand...
Click to collapse
Hi, Thanks for the reply.
I'm using LGUP 1.14 with uppercut and I can't find any "only Partition Download option", The options I have available are: Refurbish, Upgrade, Phonesetting and FOTA Upgrade.
Which of these options should I use? Should I get a different version or LGUP?
I'd like to be 100% sure before I flash my phone again.
Thanks again.

revolverg said:
Hi, Thanks for the reply.
I'm using LGUP 1.14 with uppercut and I can't find any "only Partition Download option", The options I have available are: Refurbish, Upgrade, Phonesetting and FOTA Upgrade.
Which of these options should I use? Should I get a different version or LGUP?
I'd like to be 100% sure before I flash my phone again.
Thanks again.
Click to expand...
Click to collapse
Try installing this...LGUP.zip file contents and try again. Uninstall your old version before proceeding. If your phone is detected in download mode as H990DS, then you should be able to see the options.
If your phone is not detected, then unzip V20 dll and paste in root folder of LGUP in the C/programfiles path.
Cheers

DroneJC said:
Try installing this...LGUP.zip file contents and try again. Uninstall your old version before proceeding. If your phone is detected in download mode as H990DS, then you should be able to see the options.
If your phone is not detected, then unzip V20 dll and paste in root folder of LGUP in the C/programfiles path.
Cheers
Click to expand...
Click to collapse
Hi, Thanks for the reply again.
I get this dialog and I don't know which partitions to choose:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for questioning every step of the process, Flashing partitions is a serious business and I don't want to brick my phone, it's brand new.
Thanks in advance

revolverg said:
Hi, Thanks for the reply again.
I get this dialog and I don't know which partitions to choose:
Sorry for questioning every step of the process, Flashing partitions is a serious business and I don't want to brick my phone, it's brand new.
Thanks in advance
Click to expand...
Click to collapse
Important... download only indian version as given in link for H990DS and when you get dialog, select all and press start...in 3 min your phone will reboot and thats it, your phone is back to life

I flashed to the first kdz and then the second one, just like you told me, There's 0 difference. No mobile network, the rest is unchanged.
I think it might have something to do with regional settings of frequencies and bands, I'm in Israel so maybe I need to change some settings on the secret menu.
I'll ask around and update you if I find a working solution.

Great news you guys!
Apparently all I needed to do was to configure an APN with my provider's details, that's it.
I'm ecstatic!