Database Users

Prevention Information ERROR

Hi i have the following error :
When i try to click on WI-FI button comes up the following
prevention information
the device has detected an application attempting unppermitted actions and has stopped loading.To protect your device it is recomended you reboot.
I have rooted my phone using the topic here
http://forum.xda-developers.com/showthread.php?t=2258633
i had to load the
http://k0nane.info/rom/SGH-M919-UVUAMDB-k0nane.7z
file first cos i was getting an failure when installing the superuser using odin 3.0.7
my recovery is TWRP 2.5.0.0 and i am on wicked v1
Anyone else have this issue?
please delete this thread wrong section

kaniebas said:
Hi i have the following error :
When i try to click on WI-FI button comes up the following
prevention information
the device has detected an application attempting unppermitted actions and has stopped loading.To protect your device it is recomended you reboot.
I have rooted my phone using the topic here
http://forum.xda-developers.com/showthread.php?t=2258633
i had to load the
http://k0nane.info/rom/SGH-M919-UVUAMDB-k0nane.7z
file first cos i was getting an failure when installing the superuser using odin 3.0.7
my recovery is TWRP 2.5.0.0 and i am on wicked v1
Anyone else have this issue?
please delete this thread wrong section
Click to expand...
Click to collapse
I'm having the same problem. There's a fix for t-mobile that I used but since it's a sprint phone my 3g stopped working. Does anybody have a fix for this?

kaniebas said:
Hi i have the following error :
When i try to click on WI-FI button comes up the following
prevention information
the device has detected an application attempting unppermitted actions and has stopped loading.To protect your device it is recomended you reboot.
I have rooted my phone using the topic here
http://forum.xda-developers.com/showthread.php?t=2258633
i had to load the
http://k0nane.info/rom/SGH-M919-UVUAMDB-k0nane.7z
file first cos i was getting an failure when installing the superuser using odin 3.0.7
my recovery is TWRP 2.5.0.0 and i am on wicked v1
Anyone else have this issue?
please delete this thread wrong section
Click to expand...
Click to collapse
weinerwad3000 said:
I'm having the same problem. There's a fix for t-mobile that I used but since it's a sprint phone my 3g stopped working. Does anybody have a fix for this?
Click to expand...
Click to collapse
You both are running custom kernels. You have four options:
(1) Freeze the app called SEAndroid using Titanium Backup or a similar app.
(2) Use Titanium or a similar app to uninstall the KNOX application.
(3) Use Root Explorer or a similar app to browse to /system/app and delete all files beginning with KNOX
(4) Flash the stock kernel.

rawintellect said:
You both are running custom kernels. You have four options:
(1) Freeze the app called SEAndroid using Titanium Backup or a similar app.
(2) Use Titanium or a similar app to uninstall the KNOX application.
(3) Use Root Explorer or a similar app to browse to /system/app and delete all files beginning with KNOX
(4) Flash the stock kernel.
Click to expand...
Click to collapse
Thank you so much for your reply. This has been driving me nuts. I uninstalled seandroid and knox and now the prevention information warning doesnt pop up but I still cant turn on the wifi. Ill install the stock kernel and see if that works.

weinerwad3000 said:
Thank you so much for your reply. This has been driving me nuts. I uninstalled seandroid and knox and now the prevention information warning doesnt pop up but I still cant turn on the wifi. Ill install the stock kernel and see if that works.
Click to expand...
Click to collapse
What kernel are you running? Try a different custom kernel. I can assure you that the messages have nothing to do with your inability to activate wifi. That message is a well known issue.

rawintellect said:
What kernel are you running? Try a different custom kernel. I can assure you that the messages has nothing to do with your inability to activate wifi. That message is a well known issue.
Click to expand...
Click to collapse
kernel version says 3.4.0-529760 [email protected] #1 Sat Apr 27 18:12:21 KST 2013.
my baseband ends in mdc and build number ends in mdl. Would that have any effect on it? I can't flash any other roms in rom manager because my 3g is too slow and an error occurs every time I try to flash it.

weinerwad3000 said:
kernel version says 3.4.0-529760 [email protected] #1 Sat Apr 27 18:12:21 KST 2013.
my baseband ends in mdc and build number ends in mdl. Would that have any effect on it? I can't flash any other roms in rom manager because my 3g is too slow and an error occurs every time I try to flash it.
Click to expand...
Click to collapse
Well it seems you're running an older kernel on a newer rom. without knowing the ROM I'd suggest you run a new kernel. I use this. It should work well for you.
Make sure you download the correct version. Use ASOP if you're running and ASOP ROM like CM. Use Touchwiz if you're running a Touchwiz ROM.

rawintellect said:
Well it seems you're running an older kernel on a newer rom. without knowing the ROM I'd suggest you run a new kernel. I use this. It should work well for you.
Make sure you download the correct version. Use ASOP if you're running and ASOP ROM like CM. Use Touchwiz if you're running a Touchwiz ROM.
Click to expand...
Click to collapse
Thanks. I'll try it out. I'm just running the stock rom. That's the only rom that I'm having wifi problems with.
I'm relatively new to using odin so when I try to flash the kernal i click on pda but the zip file isn't listed. What do?

weinerwad3000 said:
Thanks. I'll try it out. I'm just running the stock rom. That's the only rom that I'm having wifi problems with.
I'm relatively new to using odin so when I try to flash the kernal i click on pda but the zip file isn't listed. What do?
Click to expand...
Click to collapse
Ahhh it's not flashable in ODIN. you'll need to install a custom recovery via ODIN and then flash it. I use TWRP 2.5.0.2. It seems to be the most stable.
1) Click this and download the odin flashable version of TWRP.
2) Open ODIN. Click PDA select the file you downloaded
3) click START.
4) your phone will reboot.
Now you have TWRP installed. To flash a zip file:
1) save it to your sd card.
2) Boot into recovery. (to boot into recovery just reboot your phone. when you feel it vibrate press the volume up button until it boots into recovery)
3) click the INSTALL button.
4) find the zip file on your SDCARD. select it.
5) swipe to flash
6) press the wipe cache/dalvik button.
That's it.

rawintellect said:
Ahhh it's not flashable in ODIN. you'll need to install a custom recovery via ODIN and then flash it. I use TWRP 2.5.0.2. It seems to be the most stable.
1) Click this and download the odin flashable version of TWRP.
2) Open ODIN. Click PDA select the file you downloaded
3) click START.
4) your phone will reboot.
Now you have TWRP installed. To flash a zip file:
1) save it to your sd card.
2) Boot into recovery. (to boot into recovery just reboot your phone. when you feel it vibrate press the volume up button until it boots into recovery)
3) click the INSTALL button.
4) find the zip file on your SDCARD. select it.
5) swipe to flash
6) press the wipe cache/dalvik button.
That's it.
Click to expand...
Click to collapse
okay gotcha. that makes more sense. Didn't think you could install a zip with odin but wasn't sure. When I install different recoveries in odin I can't flash my recoveries and that's why I was trying to get cwm recovery. Thank you for your help. I'll let you know how it goes.
---------- Post added at 09:07 PM ---------- Previous post was at 08:51 PM ----------
Awesome. Thank you soo much. Finally got it working. Now if I could just fix my cm10 rom I'll be set. I'm having issues with several apps in cm10. Can only access google play, facebook, etc. sometimes. They work fine on wifi but with 3g they almost never work.
---------- Post added at 09:11 PM ---------- Previous post was at 09:07 PM ----------
rawintellect said:
Ahhh it's not flashable in ODIN. you'll need to install a custom recovery via ODIN and then flash it. I use TWRP 2.5.0.2. It seems to be the most stable.
1) Click this and download the odin flashable version of TWRP.
2) Open ODIN. Click PDA select the file you downloaded
3) click START.
4) your phone will reboot.
Now you have TWRP installed. To flash a zip file:
1) save it to your sd card.
2) Boot into recovery. (to boot into recovery just reboot your phone. when you feel it vibrate press the volume up button until it boots into recovery)
3) click the INSTALL button.
4) find the zip file on your SDCARD. select it.
5) swipe to flash
6) press the wipe cache/dalvik button.
That's it.
Click to expand...
Click to collapse
Is there anyway to get my cwm recoveries to work in twrp? I don't want to keep switching back and forth to make new recoveries.
nevermind i was looking at the internal sdcard. Got it. Thanks a million

weinerwad3000 said:
okay gotcha. that makes more sense. Didn't think you could install a zip with odin but wasn't sure. When I install different recoveries in odin I can't flash my recoveries and that's why I was trying to get cwm recovery. Thank you for your help. I'll let you know how it goes.
---------- Post added at 09:07 PM ---------- Previous post was at 08:51 PM ----------
Awesome. Thank you soo much. Finally got it working. Now if I could just fix my cm10 rom I'll be set. I'm having issues with several apps in cm10. Can only access google play, facebook, etc. sometimes. They work fine on wifi but with 3g they almost never work.
---------- Post added at 09:11 PM ---------- Previous post was at 09:07 PM ----------
Is there anyway to get my cwm recoveries to work in twrp? I don't want to keep switching back and forth to make new recoveries.
nevermind i was looking at the internal sdcard. Got it. Thanks a million
Click to expand...
Click to collapse
you can take new backups with TWRP.
also CM10 is great but ASOP roms in my opinion are for more experienced users. I'd play around with the stock Touchwiz rom first.

I've been getting this error all day today. I'm on MDL ROM. I restored it from my previous CM10.1 installation. While I was on CM10.1, I flashed the MF9 firmware. Later that day I did a factory reset in recovery and restored my previous NANDROID MDL backup. I started getting this Prevention Information error.
My baseband was MF9 while my build number was MDL. I read that I had to put the MDL firmware back on the phone. I got the MDL firmware from this link here http://forum.xda-developers.com/showthread.php?t=2338919 . After using ODIN to put the firmware back on, I went into TWRP and cleared cache and dalvik and rebooted. I'm still getting the error even though baseband and build number are both MDL.
Any ideas? Thanks!

Sydius08 said:
I've been getting this error all day today. I'm on MDL ROM. I restored it from my previous CM10.1 installation. While I was on CM10.1, I flashed the MF9 firmware. Later that day I did a factory reset in recovery and restored my previous NANDROID MDL backup. I started getting this Prevention Information error.
My baseband was MF9 while my build number was MDL. I read that I had to put the MDL firmware back on the phone. I got the MDL firmware from this link here http://forum.xda-developers.com/showthread.php?t=2338919 . After using ODIN to put the firmware back on, I went into TWRP and cleared cache and dalvik and rebooted. I'm still getting the error even though baseband and build number are both MDL.
Any ideas? Thanks!
Click to expand...
Click to collapse
This has been happening alot if you install bootloader, kernel, firmware, etc seperately. to avoid this odin back to full stock mf9.
Sent from my SPH-L720

rawintellect said:
You both are running custom kernels. You have four options:
(1) Freeze the app called SEAndroid using Titanium Backup or a similar app.
(2) Use Titanium or a similar app to uninstall the KNOX application.
(3) Use Root Explorer or a similar app to browse to /system/app and delete all files beginning with KNOX
(4) Flash the stock kernel.
Click to expand...
Click to collapse
This worked for me.

Prevention Information on Stock rom - how to get rid of it?
I started receiving this error after updating to last stock Vodafone firmware. Does anybody know how to get rid of this on a stock rom? I am not rooted.

David Vlk said:
I started receiving this error after updating to last stock Vodafone firmware. Does anybody know how to get rid of this on a stock rom? I am not rooted.
Click to expand...
Click to collapse
Just odin full mf9 stock tar. This happens because of different firmware versions together or if your rooted and such just use any root file explorer and delete all apps in system that begin with knox

Downgrade
But if I go to an older stock then I receive update notifications again and that is something I see even more annoying than selecting inform me no sooner than in 30 days option offered by Prevention information popup. Correct? Or when flashing stock through Odin again (not downgrade but doing the same thing again but through Odin) the problem dissapears?

David Vlk said:
But if I go to an older stock then I receive update notifications again and that is something I see even more annoying than selecting inform me no sooner than in 30 days option offered by Prevention information popup. Correct? Or when flashing stock through Odin again (not downgrade but doing the same thing again but through Odin) the problem dissapears?
Click to expand...
Click to collapse
If you go to mf9 thats the newest update we have really so you wouldnt get a update notification. But theres three ways to solve your problem. One odin back to stock MDL and accept then accept the update. Or second you can reflash the same firmware you have again thru odin to make sure everythin is where its suppose to be or 3rd use a root file explorer and in system/apps delete every app that begins with knox.

Also i had the same problem after i updated the S4, my problem was with K9-email client i just remove it and all things now are good.

[HOW-TO] Flash latest 4.2.2 on GT-i9082

DISCLAIMER: I am not responsible for any damage caused to your device, you solely take responsibility for any damage or bricking.
WARNING: The following firmware should only flashed in GT-I9082 and not any other devices as this might brick them.
1. Download Jelly Bean 4.2.2 I9082XXUBMF2 from https://hotfile.com/dl/233057193/bed43fc/I9082XXUBMF2_I9082OXABMF2_OXA.rar.html
2. Now extract the downloaded file I9082XXUBMF2_I9082OXABMF2_OXA.rar the package included the Odin 3.07 and firmware files.
3. Open Odin3 v3.07.exe
4. Power off Galaxy Grand Duos and boot into download mode (Press and hold Home + Power + Volume down buttons).
5. Now Connect phone and wait until you get a blue sign with port name in Odins ID:COM box.
6. Add files by clicking
PIT - baffin.pit
PDA - CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5
PHONE - MODEM_I9082XXUBMF2_REV05.tar.md5
CSC - CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5
7. Make sure Re-Partition is ticked.
Galaxy grand duos jelly bean 4.2.2 odin flash
8. Finally Click Start and wait until Odin finish flashing....After complete Phone will restart.
That's it done !
Note:
If you encounter any Force close or Boot Loop
1. Boot into recovery mode (Home+ Power + Volume Up)
2. Choose wipe/data factory reset.
(THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
3. Then choose reboot and you should be good to go!
:good: THERE YOU GO, YOU HAVE THE LATEST FIRMWARE INSTALLED IN YOUR SAMSUNG GALAXY GRAND !!! :good:
HIT LIKE IF THIS HELPED YOU
PS - Contact me for any help regarding this.

I think you should be less missleading if this is a "HOW TO" guide.
1. There is no order on the procedures.
2. You show nothing about flashing and applying CWM, as you mention it in the beginning.
3. It's GT "i"9082, not 19082.
4. I don't think you need to wipe data so often. Flashing a stock firmware through odin kind of overwrite the device. IMO one wipe after the flash is enough.

Hi, a noob here..
I'm still on a stock rom...original firmware...and I've downloaded the latest firmware (I9082XXXAMD6_I9082OLBAMD3_XTC) on the livesamsungupdate site...
Is there any clear steps on how can i update my phone without using KIES or the ODIN thing....whichever is the best...
And is there any infos or pros and cons after the updates of official firmwares?
Thanks in advance....

If the file has a .md5 or .tar it is best to flash with odin
If it is a zip file it is best to flash with CWM or other custom recovery

Suriya357 said:
If the file has a .md5 or .tar it is best to flash with odin
If it is a zip file it is best to flash with CWM or other custom recovery
Click to expand...
Click to collapse
These are the files I have from the downloaded firmware:
1. I9082XXAMD6_I9082OLBAMD3_I9082XXAMD1_HOME.tar.md5
2. SS_DL.dll
it is both tar and md5

polpan said:
These are the files I have from the downloaded firmware:
1. I9082XXAMD6_I9082OLBAMD3_I9082XXAMD1_HOME.tar.md5
2. SS_DL.dll
it is both tar and md5
Click to expand...
Click to collapse
I recommend to take a nandroid backup before proceeding
* Reboot your phone into recovery mode (vol up+home+power)
* Wipe data and cache
* Reboot your phone into download mode (vol down+home+power)
* It will show a warning press vol up to proceed
* Now open odin in your pc and connect phone via usb cable
* If odin recognizes your device th ID:COM port will turn yellow or blue(or any color)
* Now click on PDA and locate your .tar.md5 file
* Make sure only Auto reboot and F. reset time is checked
* Click on start (it will take around 10 - 15 mins)
* Once complete unplug the cable and your device will reboot
DONE YOU HAVE YOUR FIRMWARE FLASHED IN YOUR DEVICE.
if any thing goes wrong restore your backupand contact me for help.

Suriya357 said:
I recommend to take a nandroid backup before proceeding
* Reboot your phone into recovery mode (vol up+home+power)
* Wipe data and cache
* Reboot your phone into download mode (vol down+home+power)
* It will show a warning press vol up to proceed
* Now open odin in your pc and connect phone via usb cable
* If odin recognizes your device th ID:COM port will turn yellow or blue(or any color)
* Now click on PDA and locate your .tar.md5 file
* Make sure only Auto reboot and F. reset time is checked
* Click on start (it will take around 10 - 15 mins)
* Once complete unplug the cable and your device will reboot
DONE YOU HAVE YOUR FIRMWARE FLASHED IN YOUR DEVICE.
if any thing goes wrong restore your backupand contact me for help.
Click to expand...
Click to collapse
Hi, does nandroid backup works on non-rooted phones?
does upgrading to official firmware will all the installed apps, contacts, etc will be intact?

polpan said:
Hi, does nandroid backup works on non-rooted phones?
does upgrading to official firmware will all the installed apps, contacts, etc will be intact?
Click to expand...
Click to collapse
Yes it is possible to make one (if you cant then back up after rooting)
No everything will be deleted since you wiped your data before flashing but you can try titanium backup to backup all your apps and contacts before flashing and restore them after flashing.

Suriya357 said:
Yes it is possible to make one (if you cant then back up after rooting)
No everything will be deleted since you wiped your data before flashing but you can try titanium backup to backup all your apps and contacts before flashing and restore them after flashing.
Click to expand...
Click to collapse
Carbon or Helium I think is for non-rooted phones for backup... maybe it will do...
One more thing.... before I upgrade the firmware do I need to remove the SD card and the SIM cards?

polpan said:
Carbon or Helium I think is for non-rooted phones for backup... maybe it will do...
One more thing.... before I upgrade the firmware do I need to remove the SD card and the SIM cards?
Click to expand...
Click to collapse
No there is no need to do that, you will actually need sd card to save the backup.
HIT THANKS PLEASE

Just wondering, can i root it again if my phone is currently rooted? Just wish to have the latest root firmware.

KGNTSTNY said:
Just wondering, can i root it again if my phone is currently rooted? Just wish to have the latest root firmware.
Click to expand...
Click to collapse
What you mean to say ? Dint got
GT-i9082 _ custom rom
hit thanks if i helped you ...
---------- Post added at 02:40 PM ---------- Previous post was at 02:33 PM ----------
adheeshkurekar said:
What you mean to say ? Dint got
GT-i9082 _ custom rom
hit thanks if i helped you ...
Click to expand...
Click to collapse
If ur rooted and you wan to flash latest frimware you can flash with odin3.04 and then follow same procidure which you followed to root ... to root it again ...
GT-i9082 _ custom rom
hit thanks if i helped you ...

adheeshkurekar said:
What you mean to say ? Dint got
GT-i9082 _ custom rom
hit thanks if i helped you ...
---------- Post added at 02:40 PM ---------- Previous post was at 02:33 PM ----------
If ur rooted and you wan to flash latest frimware you can flash with odin3.04 and then follow same procidure which you followed to root ... to root it again ...
GT-i9082 _ custom rom
hit thanks if i helped you ...
Click to expand...
Click to collapse
That was what i meant. Thanks!!
Another question, is flashing custom ROM like rooting my device? I did mine via Cursed4ever on Youtube and it was pretty easy... So i am wondering if i can do the same with those custom ROMs posted here?

KGNTSTNY said:
That was what i meant. Thanks!!
Another question, is flashing custom ROM like rooting my device? I did mine via Cursed4ever on Youtube and it was pretty easy... So i am wondering if i can do the same with those custom ROMs posted here?
Click to expand...
Click to collapse
All custom roms are pre rooted no need to root it
GT-i9082 _ custom rom
hit thanks if i helped you ...

KGNTSTNY said:
Just wondering, can i root it again if my phone is currently rooted? Just wish to have the latest root firmware.
Click to expand...
Click to collapse
Yes you can root it again.

Screenshots
Hey guys do some one know how to delete a post ?

Any idea what is the difference or any improvement of flashing it to the latest version of the official firmware?

I read this article on how to update to latest firmware: Updating to latest firmware
"Verify that both the device's carrier and bootloader are unlocked before proceeding. Attempting to install the firmware on a locked device may completely damage or brick the device."
What does this means? is it if the device is SIM locked?
My phone is is SIM locked on the SIM1 only but not the bootloader... is there any way to check if this is locked?
Thanks in advance...

polpan said:
I read this article on how to update to latest firmware: Updating to latest firmware
"Verify that both the device's carrier and bootloader are unlocked before proceeding. Attempting to install the firmware on a locked device may completely damage or brick the device."
What does this means? is it if the device is SIM locked?
My phone is is SIM locked on the SIM1 only but not the bootloader... is there any way to check if this is locked?
Thanks in advance...
Click to expand...
Click to collapse
No this firrmware will not harm your GT-I9082 because we have bootloader unlocked ans sim unlocked,
How ever take a nandroid backup before flashing so we can revert back the changes if anything goes wrong.

Just for additional ROM links I've found. All countries ROM include latest and previous version for your Grand Duos.
http://samsung-updates.com/device/?id=GT-I9082

[Q] GT-i9500CHN

Dear All,
I am struggling to introduce different firmware to my GT-i9500CHN.
I have got from China original Samsung retailer. (went thru several checks it is genuine GT-i9500)
I have tried to put 'European' firmware as Chinese one is 'google-less' and has only Samsung Chinese IME. (I am living in the UK)
My current baseband version is I9500ZCUCMF3 and handset is not accepting any other (getting 'soft brick' via ODIN), so I am able to go back only to I9500ZCUCMF3.
My Kernel version is: 3.4.5-868190 [email protected] #1, Mon Jul 1 20:14:37 KST 2013
Has anyone have experience with changing that firmware?
Thank you for your support.

Flash it 5 file in Odin.
I9500ZSUBMF6_www.52samsung.com.rar
pan.baidu.com/share/link?shareid=860810045&uk=2083467120
download password（提取密码）：keh6
rar password：www.52samsung.com
Change to HongKong edition.Try it.

Terazoido,
Thank you for the hint. I will try to download it tonight and flash it with ODIN 3.09.
Regards

terazoido said:
Flash it 5 file in Odin.
I9500ZSUBMF6_www.52samsung.com.rar
pan.baidu.com/share/link?shareid=860810045&uk=2083467120
download password（提取密码）：keh6
rar password：www.52samsung.com
Change to HongKong edition.Try it.
Click to expand...
Click to collapse
May I just flash main file 3.CODE_I9500ZSUBMF6_927537_REV00_user_low_ship.tar.md5 ?

terazoido said:
Flash it 5 file in Odin.
I9500ZSUBMF6_www.52samsung.com.rar
pan.baidu.com/share/link?shareid=860810045&uk=2083467120
download password（提取密码）：keh6
rar password：www.52samsung.com
Change to HongKong edition.Try it.
Click to expand...
Click to collapse
Could you please give me different link as I can't download with this one?
While downloading, after 300-400MB is stopping connection and fail.. - tried several times...
Xiexie

Andorus said:
Could you please give me different link as I can't download with this one?
While downloading, after 300-400MB is stopping connection and fail.. - tried several times...
Xiexie
Click to expand...
Click to collapse
You must flash all 5 file.Sorry I not have other link.You can try to download again.

Andorus said:
Dear All,
I am struggling to introduce different firmware to my GT-i9500CHN.
I have got from China original Samsung retailer. (went thru several checks it is genuine GT-i9500)
I have tried to put 'European' firmware as Chinese one is 'google-less' and has only Samsung Chinese IME. (I am living in the UK)
My current baseband version is I9500ZCUCMF3 and handset is not accepting any other (getting 'soft brick' via ODIN), so I am able to go back only to I9500ZCUCMF3.
My Kernel version is: 3.4.5-868190 [email protected] #1, Mon Jul 1 20:14:37 KST 2013
Has anyone have experience with changing that firmware?
Thank you for your support.
Click to expand...
Click to collapse
Flash a recovery via ODIN, CWM or TWRP. Then you could flash non-stock ROM. Leave the baseband alone....

terazoido said:
You must flash all 5 file.Sorry I not have other link.You can try to download again.
Click to expand...
Click to collapse
I have finally managed to download rar. It contains:
1.adonis_3g.pit
2.BOOTLOADER_I9500ZSUBMF6_927537_REV00_user_low_sh ip.tar.md5
3.CODE_I9500ZSUBMF6_927537_REV00_user_low_ship.tar .md5
4.MODEM_I9500XXUBMF8_REV01_CL1331687_SIGNED.tar.md 5
5.CSC_OZS_I9500OZSBMF6_927537_REV00_user_low_ship.tar.md5
I have tried to flash 3.CODE_I9500ZSUBMF6_927537_REV00_user_low_ship.tar .md5 and failed & soft brick.
Fortunately I am able to go back to 3. I9500ZCUCMG1_I9500CHNCMG1_I9500ZCUCMF3_HOME.tar.md5.
I am just wondering what can happened if I fail to flash it with all 5 above files. Can I come back to 3. I9500ZCUCMG1_I9500CHNCMG1_I9500ZCUCMF3_HOME.tar.md5 ? Or I would need to flash 5 original files (which I don't have..)
Thank you
cellegg said:
Flash a recovery via ODIN, CWM or TWRP. Then you could flash non-stock ROM. Leave the baseband alone....
Click to expand...
Click to collapse
Which file contains baseband? (Is it the same what Kernel is?)
Thank you

Which file contains baseband? (Is it the same what Kernel is?)
Thank you[/QUOTE]
It is the MODEM file. As I said, leave the baseband alone... Those files you downloaded are for i9500 HK version, but you are holding China Mainland version. They might have minor difference.
Download latest twrp.tar file and flash using Odin in the PDA tab.
Press Volume UP + Home immediately after reboot, you should see TWRP UI if succeed.

cellegg said:
Which file contains baseband? (Is it the same what Kernel is?)
Thank you
Click to expand...
Click to collapse
It is the MODEM file. As I said, leave the baseband alone... Those files you downloaded are for i9500 HK version, but you are holding China Mainland version. They might have minor difference.
Download latest twrp.tar file and flash using Odin in the PDA tab.
Press Volume UP + Home immediately after reboot, you should see TWRP UI if succeed.[/QUOTE]
Dear Cellegg,
Thank you for advice. Do I need to be rooted for that operation?
Thank you

Andorus said:
It is the MODEM file. As I said, leave the baseband alone... Those files you downloaded are for i9500 HK version, but you are holding China Mainland version. They might have minor difference.
Download latest twrp.tar file and flash using Odin in the PDA tab.
Press Volume UP + Home immediately after reboot, you should see TWRP UI if succeed.
Click to expand...
Click to collapse
Dear Cellegg,
Thank you for advice. Do I need to be rooted for that operation?
Thank you[/QUOTE]
Nope.

cellegg said:
Dear Cellegg,
Thank you for advice. Do I need to be rooted for that operation?
Thank you
Click to expand...
Click to collapse
Nope.[/QUOTE]
Hi Cellegg,
I have found below instruction to install TWRP:
http://galaxys4root.com/galaxy-s4-root/how-to-root-galaxy-s4-using-twrp-method/
at the end of it, it is mentioned to root it with SuperSU zip
What do you think about it?
I am not sure if can do it with my Kernel. How to check if I don't have: SetUID restriction on the kernel ?
Thank you for your support

Andorus said:
Nope.
Click to expand...
Click to collapse
Hi Cellegg,
I have found below instruction to install TWRP:
http://galaxys4root.com/galaxy-s4-root/how-to-root-galaxy-s4-using-twrp-method/
at the end of it, it is mentioned to root it with SuperSU zip
What do you think about it?
I am not sure if can do it with my Kernel. How to check if I don't have: SetUID restriction on the kernel ?
Thank you for your support
Click to expand...
Click to collapse
Following that instruction would work. Yes, you need flash SuperSU to root your phone.
But if you want to flash other non-stock rom, just ignore that step, most of non-stock rom already includes SuperSU.
I haven't heard of any China Mainland version cellphone encountered SetUID restriction issue.

cellegg said:
Following that instruction would work. Yes, you need flash SuperSU to root your phone.
But if you want to flash other non-stock rom, just ignore that step, most of non-stock rom already includes SuperSU.
I haven't heard of any China Mainland version cellphone encountered SetUID restriction issue.
Click to expand...
Click to collapse
Dear Cellegg,
I have managed to install TWRP and installed SuperSU v1.51 (0.91 was unable to update the binaries..)
Everything seems to be running fine (I did full backup to SD). However I am not sure how to proceed now...
I would like to have google apps and English IME. Shall I flash some custom ROM? What do you advise?
Thank you,

Andorus said:
Dear Cellegg,
I have managed to install TWRP and installed SuperSU v1.51 (0.91 was unable to update the binaries..)
Everything seems to be running fine (I did full backup to SD). However I am not sure how to proceed now...
I would like to have google apps and English IME. Shall I flash some custom ROM? What do you advise?
Thank you,
Click to expand...
Click to collapse
Custom Rom would be better.
Try OMEGA rom:
http://forum.xda-developers.com/showthread.php?t=2232887
Presume you know how to use TWRP, backup all your stuff and full wipe (cache, delvik cache, rom, data)

cellegg said:
Custom Rom would be better.
Try OMEGA rom:
http://forum.xda-developers.com/showthread.php?t=2232887
Presume you know how to use TWRP, backup all your stuff and full wipe (cache, delvik cache, rom, data)
Click to expand...
Click to collapse
Dear Cellegg,
I have tried to flash OMEGA as advised, but unsuccesful. I have read on the OMEGA thread, that:
Wipe cache partition automatic before roms installation
Wipe Dalvik Cache automatic during installation
Wipe preload partition automatic before roms installation
Wipe System automatic before roms installation
is included, so I didn't proceed with wipe (I have seen it being wiped while flashing)
I have also flashed XXUBMG9 at the beginning as advised on OMEGA thread.
After reboot, I have got standard white 'Samsung logo GT-i9500' and after that nothing happened --> black screen...
I was able to restore via TWRP to start point.
Any ideas?
thank you

Andorus said:
Dear Cellegg,
I have tried to flash OMEGA as advised, but unsuccesful. I have read on the OMEGA thread, that:
Wipe cache partition automatic before roms installation
Wipe Dalvik Cache automatic during installation
Wipe preload partition automatic before roms installation
Wipe System automatic before roms installation
is included, so I didn't proceed with wipe (I have seen it being wiped while flashing)
I have also flashed XXUBMG9 at the beginning as advised on OMEGA thread.
After reboot, I have got standard white 'Samsung logo GT-i9500' and after that nothing happened --> black screen...
I was able to restore via TWRP to start point.
Any ideas?
thank you
Click to expand...
Click to collapse
Wipe procedure during OMEGA installation somehow would not fully remove stock files...you have to use TWRP's wipe to do that.
1) Advanced Wipe in TWRP (data, system, cache, delivk cache.)
2) flash OMEGA rom
One more thing, if you encounter WIFI or Bluetooth issue, try to flash different kernel, Adam kernel.

cellegg said:
Wipe procedure during OMEGA installation somehow would not fully remove stock files...you have to use TWRP's wipe to do that.
1) Advanced Wipe in TWRP (data, system, cache, delivk cache.)
2) flash OMEGA rom
One more thing, if you encounter WIFI or Bluetooth issue, try to flash different kernel, Adam kernel.
Click to expand...
Click to collapse
Hi Cellegg,
Thank you for hints.
I have followed OMEGA's instruction about modem:
'Flash the new modem XXUBMG9 before flashing Omega v12, get it from here or from Omega Files free and Pro. If you did not flash the new modem first then you may loose your modem. If this happens flash XXUBMG9 modem to restore it'
What do you think about it?
I will try with Advance WIpe in TWRP as next.
[edit] Unfortunately same result after flashing modem XXUBMG9 and Omega v12 rom - black screen... no idea why?!
Any ideas?
[edit2] I have checked information about baseband/modem in 'About device' and it is showing: I9500XXUBMG9
Thanks

Andorus said:
Dear Cellegg,
I have tried to flash OMEGA as advised, but unsuccesful. I have read on the OMEGA thread, that:
Wipe cache partition automatic before roms installation
Wipe Dalvik Cache automatic during installation
Wipe preload partition automatic before roms installation
Wipe System automatic before roms installation
is included, so I didn't proceed with wipe (I have seen it being wiped while flashing)
I have also flashed XXUBMG9 at the beginning as advised on OMEGA thread.
After reboot, I have got standard white 'Samsung logo GT-i9500' and after that nothing happened --> black screen...
I was able to restore via TWRP to start point.
Any ideas?
thank you
Click to expand...
Click to collapse
Andorus said:
Hi Cellegg,
Thank you for hints.
I have followed OMEGA's instruction about modem:
'Flash the new modem XXUBMG9 before flashing Omega v12, get it from here or from Omega Files free and Pro. If you did not flash the new modem first then you may loose your modem. If this happens flash XXUBMG9 modem to restore it'
What do you think about it?
I will try with Advance WIpe in TWRP as next.
[edit] Unfortunately same result after flashing modem XXUBMG9 and Omega v12 rom - black screen... no idea why?!
Any ideas?
[edit2] I have checked information about baseband/modem in 'About device' and it is showing: I9500XXUBMG9
Thanks
Click to expand...
Click to collapse
It seems you had successfully flashed the MODEM/baseband, if I9500XXUBMG9 showed in 'About Device'
I would say try again...or try other Recovery and Roms...
Anyway, if all above failed..here it is the Google apps package: http://www.vdisk.cn/down/index/13790672 (hit "智能线路下载" to download)
You must root your phone before flashing it.

cellegg said:
It seems you had successfully flashed the MODEM/baseband, if I9500XXUBMG9 showed in 'About Device'
I would say try again...or try other Recovery and Roms...
Anyway, if all above failed..here it is the Google apps package: http://www.vdisk.cn/down/index/13790672 (hit "智能线路下载" to download)
You must root your phone before flashing it.
Click to expand...
Click to collapse
Hi Cellegg,
Thank you for your advices.
Finally I have managed to make it works with Arrow 6.0 Custom ROM.
Everything seems to be running fine and it is a huge release after so many days...
Once again thanks for your comments and ideas.
To all members: if you have similar phone (GT-i9500CHN) or other and I would be able to help somehow, please ask the question - I am happy to support as much as I can.

My phone won't boot!

Dear xda users,
I have a big problem with my Samsung S7 Edge G935F!
Yesterday my phone restarts continuously so I used Odin to flash Firmware Stock. First, I used this Firmware: http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065 .
Odin doesn't show any errors and my phone restarts; but after Samsung S7 Edge Boot Splash Screen, the phone shows a screen with yellow triangle and Android dead and then, phone restarts in Stock Recovery Mode.
In the Recovery mode when I press Reboot System Now or PowerOff, appears "Verifying DMVerity Hash Tree..." and then "Failed" and my phone restarts again in Recovery.
I tried Wipe data and cache but Nothing!
Then I tried to repair firmware with Kies 3: No errors but my phone won't boot!!
And then I tried another firmware file with Odin but nothing!
The phone is Completely Stock! Recovery Mode and Download Mode work and the phone is recognised by PC.
Please help me!
Thanks in advance
Sorry for my english

re: firmware issues
adc.droid said:
Dear xda users,
I have a big problem with my Samsung S7 Edge G935F!
Yesterday my phone restarts continuously so I used Odin to flash Firmware Stock. First, I used this Firmware: http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065 .
Odin doesn't show any errors and my phone restarts; but after Samsung S7 Edge Boot Splash Screen, the phone shows a screen with yellow triangle and Android dead and then, phone restarts in Stock Recovery Mode.
In the Recovery mode when I press Reboot System Now or PowerOff, appears "Verifying DMVerity Hash Tree..." and then "Failed" and my phone restarts again in Recovery.
I tried Wipe data and cache but Nothing!
Then I tried to repair firmware with Kies 3: No errors but my phone won't boot!!
And then I tried another firmware file with Odin but nothing!
The phone is Completely Stock! Recovery Mode and Download Mode work and the phone is recognised by PC.
Please help me!
Thanks in advance
Sorry for my english
Click to expand...
Click to collapse
Have you tried doing a "Factory Data Reset" in stock recovery yet?
If not, do that before doing anything else.
The Factory Data Reset in stock recovery will WIPE your internal
sdcard but it will not wipe your external SD if you have one.
Also it would be very helpful to know the exact filename(s) of the
stock firmware(s) which you have tried to odin flash and what the
model of your phone is. (G938F) or other variant?)
Good luck and have a great day!

Misterjunky said:
Have you tried doing a "Factory Data Reset" in stock recovery yet?
If not, do that before doing anything else.
The Factory Data Reset in stock recovery will WIPE your internal
sdcard but it will not wipe your external SD if you have one.
Also it would be very helpful to know the exact filename(s) of the
stock firmware(s) which you have tried to odin flash and what the
model of your phone is. (G938F) or other variant?)
Good luck and have a great day!
Click to expand...
Click to collapse
Thanks for your reply!
Yes I tried Wiped data/Factory Reset and Wipe cache partition in Stock Recovery..
Device: Samsung Galaxy S7 Edge
Model: SM-G935F
Firmwares tha I tried to flash with Odin:
Netherlands (Android 6.0.1) G935FXXU1APF2_G935FPHN1APE2_G935FXXU1APEQ_PHN
Italy (Android 6.0.1) G935FXXU1APF2_G935FITV1APE2_ITV

If flashing succeeds, and you still have the same problem:
go back with your device where you bought it
You can't solve it yourself, and probably something is wrong/defect with the main-board
When you 1st discovered the continuous reboot:
1. why did you not go to the store where you bought your phone?
2. why trying to flash "other firmware" on your phone instead of your "original firmware"?
What's your original CSC? Flash your phone with your original phone's CSC and bring your phone back for repair and/or replacement!

re: Odin flashing
adc.droid said:
Thanks for your reply!
Yes I tried Wiped data/Factory Reset and Wipe cache partition in Stock Recovery..
Device: Samsung Galaxy S7 Edge
Model: SM-G935F
Firmwares tha I tried to flash with Odin:
Netherlands (Android 6.0.1) G935FXXU1APF2_G935FPHN1APE2_G935FXXU1APEQ_PHN
Italy (Android 6.0.1) G935FXXU1APF2_G935FITV1APE2_ITV
Click to expand...
Click to collapse
Are you using the latest version of Odin3?
The latest version is "3.11.1" if not here
is the download link for it, give it a try:
https://www.androidfilehost.com/?fid=24572369242686812
Good luck,
Have a great day!

henklbr said:
If flashing succeeds, and you still have the same problem:
go back with your device where you bought it
You can't solve it yourself, and probably something is wrong/defect with the main-board
When you 1st discovered the continuous reboot:
1. why did you not go to the store where you bought your phone?
2. why trying to flash "other firmware" on your phone instead of your "original firmware"?
What's your original CSC? Flash your phone with your original phone's CSC and bring your phone back for repair and/or replacement!
Click to expand...
Click to collapse
In attacchments there are images of Recovery Mode.
I don't know CSC because phone won't boot to see the code.. Kies says that CSC code is PE2
I can not do anything.. right?

Misterjunky said:
Are you using the latest version of Odin3?
The latest version is "3.11.1" if not here
is the download link for it, give it a try:
https://www.androidfilehost.com/?fid=24572369242686812
Good luck,
Have a great day!
Click to expand...
Click to collapse
Yes, I did. I tried Odin v3.10.7 and v3.11.1

adc.droid said:
Yes, I did. I tried Odin v3.10.7 and v3.11.1
Click to expand...
Click to collapse
you could try samsung smartswitch for pc.If it works cool but if that does not work i suggest taking it back.

jdoggawesomex900 said:
you could try samsung smartswitch for pc.If it works cool but if that does not work i suggest taking it back.
Click to expand...
Click to collapse
I tried with Kies3 but the problem remains.. I think with Smartswitch is the same thing because the file and the installation procedure is identical.. I don't know

adc.droid said:
I tried with Kies3 but the problem remains.. I think with Smartswitch is the same thing because the file and the installation procedure is identical.. I don't know
Click to expand...
Click to collapse
But smartswitch is newer and supports most samsung devices 5.0 and up.Kies is not meant for anything higher than kitkat.

jdoggawesomex900 said:
But smartswitch is newer and supports most samsung devices 5.0 and up.Kies is not meant for anything higher than kitkat.
Click to expand...
Click to collapse
So I'll try with SmartSwitch..

SM-N910F

Hello guys!
my note 4 software is damaged
it shows android is dead (no command)
i tried with odin to fix it but it didnt went well
now i can only access to recover booting or download mode
and it shows errors all over the screen
what can i do ?
anyone can help? :highfive:
Regards
Rida

hahohaa said:
Hello guys!
my note 4 software is damaged
it shows android is dead (no command)
i tried with odin to fix it but it didnt went well
now i can only access to recover booting or download mode
and it shows errors all over the screen
what can i do ?
anyone can help? :highfive:
Regards
Rida
Click to expand...
Click to collapse
Flash twrp recovery by odin for your model
Once boot into twrp flash any rom for your model.

Trex888 said:
Flash twrp recovery by odin for your model
Once boot into twrp flash any rom for your model.
Click to expand...
Click to collapse
i'm trying to flash twrp but its not working
,from where can i get twrp copy for my sm-n910f?
thanks for help

hahohaa said:
i'm trying to flash twrp but its not working
,from where can i get twrp copy for my sm-n910f?
thanks for help
Click to expand...
Click to collapse
Download twrp.tar file n910f
https://dl.twrp.me/trltexx/twrp-3.0.2-0-trltexx.img.tar.html
Flash using odin and uncheck auto reboot in odin options
Once twrp flash complete in odin remove battery and insert again then press volume up+home+power together to boot into twrp.
You can flash any rom for n910f from twrp.
this is very good rom for n910f below.
https://www.androidfilehost.com/?fid=673368273298915478
This rom need marshmallow bootloader if you are on lollipop this rom will not work.

Trex888 said:
Download twrp.tar file n910f
https://dl.twrp.me/trltexx/twrp-3.0.2-0-trltexx.img.tar.html
Flash using odin and uncheck auto reboot in odin options
Once twrp flash complete in odin remove battery and insert again then press volume up+home+power together to boot into twrp.
You can flash any rom for n910f from twrp.
this is very good rom for n910f below.
https://www.androidfilehost.com/?fid=673368273298915478
This rom need marshmallow bootloader if you are on lollipop this rom will not work.
Click to expand...
Click to collapse
i have twrp now.
thanks man!
but still the rom pls !

hahohaa said:
i have twrp now.
thanks man!
but still the rom pls !
Click to expand...
Click to collapse
after i download it
i need to put it on SD then install it ?
is that right?

hahohaa said:
after i download it
i need to put it on SD then install it ?
is that right?
Click to expand...
Click to collapse
Yes download and put in microsd card then go to twrp and wipe (system/data/cache/dalvik cache) after wipe flash rom and wait 15 minutes to boot.this rom will take time only first time to boot so be patient.
Download this rom
Make sure you are on marshmallow otherwise it will not work.
https://www.androidfilehost.com/?fid=673368273298915478

Trex888 said:
Yes download and put in microsd card then go to twrp and wipe (system/data/cache/dalvik cache) after wipe flash rom and wait 15 minutes to boot.this rom will take time only first time to boot so be patient.
Download this rom
Make sure you are on marshmallow otherwise it will not work.
https://www.androidfilehost.com/?fid=673368273298915478
Click to expand...
Click to collapse
i tried to do so but it shows me "zip verification failed" ...
do i need to change kernel or firmware ?
since two days i'm sitting and trying :|

hahohaa said:
i tried to do so but it shows me "zip verification failed" ...
do i need to change kernel or firmware ?
since two days i'm sitting and trying :|
Click to expand...
Click to collapse
Uncheck zip verification on twrp before flashing rom

Trex888 said:
Uncheck zip verification on twrp before flashing rom
Click to expand...
Click to collapse
i did,
but it shows "checking current CSC failed installer will use btu"
is that ok ?

hahohaa said:
i did,
but it shows "checking current CSC failed installer will use btu"
is that ok ?
Click to expand...
Click to collapse
Yes thats fine go for it.
Actually this rom comes with multi csc codes thats why it confirm which csc you want to use.
Choose whatever csc dosent matter.

hahohaa said:
i did,
but it shows "checking current CSC failed installer will use btu"
is that ok ?
Click to expand...
Click to collapse
i'm waiting almost 45 minutes and it still showing installing system please wait!
to wait more a bit or to reboot it?

hahohaa said:
i'm waiting almost 45 minutes and it still showing installing system please wait!
to wait more a bit or to reboot it?
Click to expand...
Click to collapse
its just keep black out
even twrp not working now!
i have bad luck
maybe firmware would help?

hahohaa said:
its just keep black out
even twrp not working now!
i have bad luck
maybe firmware would help?
Click to expand...
Click to collapse
Wipe everything in twrp including internal storage and flash stock firmware.
After flash firmware make wipe data factory reset from recovery.
Try any other rom if twrp still wotking.

Trex888 said:
Wipe everything in twrp including internal storage and flash stock firmware.
After flash firmware make wipe data factory reset from recovery.
Try any other rom if twrp still wotking.
Click to expand...
Click to collapse
i tried another roms but it shows system failed , and after that i need to take off battery 2 or 3 times till it works.
originally i had android 6.0.1 on it and suddenly while useing F.B app the phone gone crazy then shut down.
since that time i tried many different ways
yesterday i tried to put full firmware 4.4 and 5.1 but both didnt work, then i tried latest firmware from sammobile
but nothing helped !
what i can do more >?

hahohaa said:
i tried another roms but it shows system failed , and after that i need to take off battery 2 or 3 times till it works.
originally i had android 6.0.1 on it and suddenly while useing F.B app the phone gone crazy then shut down.
since that time i tried many different ways
yesterday i tried to put full firmware 4.4 and 5.1 but both didnt work, then i tried latest firmware from sammobile
but nothing helped !
what i can do more >?
Click to expand...
Click to collapse
In download mode what is your model number says ?
Is it shows SM-N910F or something else ?

Trex888 said:
In download mode what is your model number says ?
Is it shows SM-N910F or something else ?
Click to expand...
Click to collapse
yes, the product name : sm-n910f
system status official
knox: 0x1 (4)
reactication lock: off

hahohaa said:
yes, the product name : sm-n910f
system status official
knox: 0x1 (4)
reactication lock: off
Click to expand...
Click to collapse
Try this rom
Make full wipe and Flash in twrp.
https://www.androidfilehost.com/?fid=24659325368664568
Once the rom works flash official 6.0.1 marsh.allow firmware in odin.

Trex888 said:
Try this rom
Make full wipe and Flash in twrp.
https://www.androidfilehost.com/?fid=24659325368664568
Once the rom works flash official 6.0.1 marsh.allow firmware in odin.
Click to expand...
Click to collapse
when i did wiping it shows "faild to mount cache (invalid argument)"
is that ok ?

hahohaa said:
when i did wiping it shows "faild to mount cache (invalid argument)"
is that ok ?
Click to expand...
Click to collapse
Oh dear ! Thats not a good sign.your motherboard is acting crazy.try flash twrp again in odin and try to flash rom without wipe cache or dalvik cache (just wipe system) and flash rom.
If same error ( invalid argument) shows again then in twrp advance wipe there is repair tab at bottom in twrp try to repair cache partition and try again.