Related
Hi. I crashed my wizard´s display. LCD works, but touchpad is broken. I want to reboot the device and controll it via remote-sw from pc. Does anyone know, how to skip the lcd-configure-process after hard-reset. This is the point where I can´t continue because of the non-working touchpad... Thanks for your help ! Buy the way: Did anyone changed touchpad succesfull ? Has to be brazed !?
hackl77 said:
Hi. I crashed my wizard´s display. LCD works, but touchpad is broken. I want to reboot the device and controll it via remote-sw from pc. Does anyone know, how to skip the lcd-configure-process after hard-reset. This is the point where I can´t continue because of the non-working touchpad... Thanks for your help ! Buy the way: Did anyone changed touchpad succesfull ? Has to be brazed !?
Click to expand...
Click to collapse
Try mymobiler http://www.mymobiler.com/ I am not sure if it will install before while asking to set up the touch pad but it is worth a try. I figured this maybe good because it does not ask to be installed on the device.
Thank you dwertz for your help. I tried, but "mymobiler" can only by installed after finishing the setup process on ppc. mhhh....
hackl77 said:
Thank you dwertz for your help. I tried, but "mymobiler" can only by installed after finishing the setup process on ppc. mhhh....
Click to expand...
Click to collapse
Try this.
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
connect the device using active sync then use windws explorer and explorer the device ,go into the windows folder on your device and delete the welcome.ink file, then soft reset and it wont bug you again till you hard reset.
you should also check this link out as you can use software to align the screen remotely
http://forum.xda-developers.com/showthread.php?t=347539&highlight=bypassing+screen+alignment
i had the same problem with my wizard. i got around pretty much everything, the only thing i can think of that i never figured out how to work with the keyboard is the alarm clocks. other than that with the arrow keys and tab button you should be set.
as far as getting it fixed, i found a replacement touch matrix and replaced it myself. i do not reccommend this as it caused a TON of headaches and still doesn't work right to this day. if i were you try getting a lcd/touch screen combo on ebay, its not too bad to open it and replace it.
Hi forum-users,
I´m new to this forum, it´s great, thanks to all posters.... I´m german, please excuse my weak english.
I searched the forum for a solution for my problem, but didn´t find it:
I´m using the built-in software "Remote Desktop", and it works fine, except that I´m not able to switch between fullscreen-mode and the mode where i have menus and can use the onscreen-keyboard.
How can I toggle between fullscreen-mode and non-fullscreen-mode.
Non of the 7 keys of the touch HD seems to have this function.....
thanks a lot for your advices.
AsterX
Hi AsterX, welcome to the forum.
I also do have a problem with RDP Mobile. I never get a connection with RDP Mobile to my local PC. I set up the wlan, connected to it, but if I try to connect to the PC it never succeds.
Does anybody know what it could be?
(DHCP is off in my LAN)
Ascenca83 said:
Hi AsterX, welcome to the forum.
I also do have a problem with RDP Mobile. I never get a connection with RDP Mobile to my local PC. I set up the wlan, connected to it, but if I try to connect to the PC it never succeds.
Does anybody know what it could be?
(DHCP is off in my LAN)
Click to expand...
Click to collapse
- Do you have remote function enabled on target-device?
- Do you have specified an account for remote?
- Firewall rule active for remote-desktop?
- Can you connect a shared folder via Mobile Explorer?
Please check these points.
D-Jay said:
- Do you have remote function enabled on target-device?
- Do you have specified an account for remote?
- Firewall rule active for remote-desktop?
- Can you connect a shared folder via Mobile Explorer?
Please check these points.
Click to expand...
Click to collapse
Hi D-Jay
Thanks for your answer.
Indeed all points you mentioned are fine cos I use my second PC (client) to get to the server trough RDP. So I dont know why it doesnt work with the mobile.
I tried to connect with the same account I am using from the client PC, so it should work, doesnt it?
Ascenca
AsterX said:
Hi forum-users,
I´m new to this forum, it´s great, thanks to all posters.... I´m german, please excuse my weak english.
I searched the forum for a solution for my problem, but didn´t find it:
I´m using the built-in software "Remote Desktop", and it works fine, except that I´m not able to switch between fullscreen-mode and the mode where i have menus and can use the onscreen-keyboard.
How can I toggle between fullscreen-mode and non-fullscreen-mode.
Non of the 7 keys of the touch HD seems to have this function.....
thanks a lot for your advices.
AsterX
Click to expand...
Click to collapse
try double tap the screen to go to full screen, if there isn't a menu.
Hi buggybug0,
thanks for Your reply.
I already tried double tapping on the screen, also I tried long tapping/holding on then screen. Up to now I didn´t find any way to toggle from fullscreen to ´normal´ screen.
Any further ideas?
AsterX
AsterX said:
Hi buggybug0,
thanks for Your reply.
I already tried double tapping on the screen, also I tried long tapping/holding on then screen. Up to now I didn´t find any way to toggle from fullscreen to ´normal´ screen.
Any further ideas?
AsterX
Click to expand...
Click to collapse
ahh.. well my HD won't arrive till friday, and i just sold my TyTn. umm.. try putting the stylus at all four corners, and/or all four edges (middle of the edge) to see if it brings up a hidden menu. I know on win xp desktop version of the Remote Desktop has the menu auto hide at the middle top of the screen, may be the same thing?
sorry, since i don't have any device, i'm just shooting blanks, may not work
Hi buggybug0
thanks for Your efforts
I putted die stylus to all corners, middles, long, short, tapping, holding, double-tapping.... I can´t find any way to return from fullscreen to non-fullscreen.....:-(
I also know the behavior of the desktop-version of RDP, unfortunatly it is not the same way on mobile...
Maybe You will find a solution when You have Your own HD
Thanks
AsterX
buggybug0 said:
ahh.. well my HD won't arrive till friday, and i just sold my TyTn. umm.. try putting the stylus at all four corners, and/or all four edges (middle of the edge) to see if it brings up a hidden menu. I know on win xp desktop version of the Remote Desktop has the menu auto hide at the middle top of the screen, may be the same thing?
sorry, since i don't have any device, i'm just shooting blanks, may not work
Click to expand...
Click to collapse
AsterX said:
Hi buggybug0
thanks for Your efforts
I putted die stylus to all corners, middles, long, short, tapping, holding, double-tapping.... I can´t find any way to return from fullscreen to non-fullscreen.....:-(
I also know the behavior of the desktop-version of RDP, unfortunatly it is not the same way on mobile...
Maybe You will find a solution when You have Your own HD
Thanks
AsterX
Click to expand...
Click to collapse
I have the same problem, if you go full screen you're not getting out of full screen without killing the application! I think another issue with no hard soft keys.
I even dont get a connection
How did you set up your LAN? What Windows is on the PC you connect?
Did you configure something special on the PC to get it working?
Ascenca83 said:
I even dont get a connection
How did you set up your LAN? What Windows is on the PC you connect?
Did you configure something special on the PC to get it working?
Click to expand...
Click to collapse
Hi Ascenca83
the connection itself worked at once.
PC: WIN XP SP3, conntected to a LAN through cable, fixed ip-Adress, MY COMPUTER, PROPERTIES, REMOTE, [X] ALLOW USERS TO ESTABLISH A REMOTECONNECTION
Touch HD: Remote Desktop, IP-Adress, Connect..., User/Password, and it works.
But the problem, that I can´t get out of the fullscreen, and therefore can´t use the virtual keyboard, still exists....
hth
AsterX
Found the problem. Strangely the Touch HD had problem with my wpa-psk key. Had to set a new one and update the time setting of the router and then it worked.
With wpa2-psk I wasnt able to get a connection at all. Unsupported??
I tried RDC and got 'Internal Error'
Anyone know what this means?
Hmmm weird, to access the network I have to go into IE and type \\SERVER\ but despite the fact this opens the file manager it doesn't work directly in file manager!!!
If I browse to a folder on my server, I cannot then go back to \\SERVER\ afterwards without going via IE again!
What's with that!!!! Might expain why RDC doesn't work though.
Probably we need to contact HTC support and ask?
Who is the developer of this RDP mobile? Microsoft?
Or maybe just wait couple of months for Win Mo 6.5 Probably they fixed there.
Cant wait that looooooong
Is there really no solution for it to go fullscreen on this lovely portable screen?
Any alternative programs?
Ascenca
I think, there should be another solution for this problem than waiting for WIN6.5;-)?
The Touch HD is because of its large screen a great tool for a RemoteDektopClient. But without beeing able to work in fullscreen-mode, a great part of the worth of an bis screen is gone...
Does HTC have a good working support-hotline via email?
Thanks
AsterX
gogol said:
Probably we need to contact HTC support and ask?
Who is the developer of this RDP mobile? Microsoft?
Or maybe just wait couple of months for Win Mo 6.5 Probably they fixed there.
Click to expand...
Click to collapse
@buggybug0:
Did You get Your HTC Touch HD? How do You like it?
And could You also see the problem?
Thanks
AsterX
buggybug0 said:
ahh.. well my HD won't arrive till friday, and i just sold my TyTn. umm.. try putting the stylus at all four corners, and/or all four edges (middle of the edge) to see if it brings up a hidden menu. I know on win xp desktop version of the Remote Desktop has the menu auto hide at the middle top of the screen, may be the same thing?
sorry, since i don't have any device, i'm just shooting blanks, may not work
Click to expand...
Click to collapse
AsterX said:
@buggybug0:
Did You get Your HTC Touch HD? How do You like it?
And could You also see the problem?
Thanks
AsterX
Click to expand...
Click to collapse
AsterX, don't worry, i still remember you. infact, the first thing i tried when i got my phone was RemoteDesktop. Now I see your problem, i couldn't find a solution.. yet. for the sake of other the issue is this:
in mobile remote desktop client, when you log on using non-full screen, then go to full screen with connection still being alive, you cannot get out of full screen. of course you can also choose to go into full screen as the client connects, but the problem still exists -> if you are in full screen now, you can't get out of it.
this problem never came to mind because my previous PPC had a keyboard. i still be poking around on this issue.
Hi buggybug0
yes, You exactly described the problem.
Additionally, when you are in fullscreen-mode, you cant reach the virtual keyboard
So you can't type anything, if You are in fullscreen-mode..., and you can't leave the fullscreen-mode without cutting the connection
Thanks
AsterX
buggybug0 said:
AsterX, don't worry, i still remember you. infact, the first thing i tried when i got my phone was RemoteDesktop. Now I see your problem, i couldn't find a solution.. yet. for the sake of other the issue is this:
in mobile remote desktop client, when you log on using non-full screen, then go to full screen with connection still being alive, you cannot get out of full screen. of course you can also choose to go into full screen as the client connects, but the problem still exists -> if you are in full screen now, you can't get out of it.
this problem never came to mind because my previous PPC had a keyboard. i still be poking around on this issue.
Click to expand...
Click to collapse
Since a few weeks I have the following problem. Most of the time when I'm surfing on the internet and I close the browser, my phone hangs. I can 'press' the buttons below and it will vibrate. Also the powerbutton works, but the screen itself is totally locked and won't react to any touches.
Does anyone knows what the problem could be?
I'm using the standard NL ROM.
Thnx in advance.
demo1987 said:
Since a few weeks I have the following problem. Most of the time when I'm surfing on the internet and I close the browser, my phone hangs. I can 'press' the buttons below and it will vibrate. Also the powerbutton works, but the screen itself is totally locked and won't react to any touches.
Does anyone knows what the problem could be?
I'm using the standard NL ROM.
Thnx in advance.
Click to expand...
Click to collapse
already report on a least other topic, please use the search function of this forum, I got the same problem
PJMDS said:
already report on a least other topic, please use the search function of this forum, I got the same problem
Click to expand...
Click to collapse
I tried the search function in here, but couldn't find the problem. Is there an solution posted already?
if you installed the ati driver for VR hologram, remove it and you will get your problem fixed.
it is written somewhere here
I started a thread about this issue (here).
And no, removing the 3D driver didn't solve anything.
did you delete htcapi.dll?
uninstaling ati driver + deleting htcapi.dll solved the freezing problem for me
noris08 said:
did you delete htcapi.dll?
uninstaling ati driver + deleting htcapi.dll solved the freezing problem for me
Click to expand...
Click to collapse
It worked! Thanks for the advice.
Hi,
I found this
http://connect-utb.com/index.php?option=com_rokdownloads&view=folder&Itemid=68&id=2:android-port
http://connect-utb.com/index.php?option=com_jdownloads&Itemid=58&task=viewcategory&catid=5
http://connect-utb.com/index.php?op...8&id=20:android-for-htc-touch-diamond-diam500
Anyone want to try?
Does this replace Windows Mobile or run along side of it? If it replaces it, anybody know of an Windows Mobile 6.1 Stock Sprint ROM?
you do know that in Rom Development there is a whole 4,000 odd posts about this and its development? have a look here.
http://forum.xda-developers.com/showthread.php?t=402002
and no it doesn't replace windows what it does it using haret it boot loads linux and effectively runs android as if it were its stock rom, but doesn't delete WinMo, and its not an emulator. see the thread above for more details.
New ?
21.06.09
http://connect-utb.com/index.php?op...=file&Itemid=68&id=29:android-for-htc-diamond
im not sure if this works for DIAM500 or not but have a go. it works for me but im on DIAM100 but it still freezes but i can actually make and receive calls.
!!! USE
I use it for 3 days, only problem sometimes it says battery is empty, wireless is not working and bluetooth is not working,, it doesnt replace windows,,. and it works perfect
HI!
I've searched without luck for month now: I've got an DIAM300 and i could not get to startup any android version (hanging on glowing android).
Does anyone know the difference between diam100,110,500 and my diam 300??
answer in diam forum was "sorry, but you've the second person i've met who owns an diam300"
My diam300 is an HTC diamond german O2 version (round corners on cover)
Thanks for help!
Good news ! It can call
but the battery lost very fast
infantilo said:
HI!
I've searched without luck for month now: I've got an DIAM300 and i could not get to startup any android version (hanging on glowing android).
Does anyone know the difference between diam100,110,500 and my diam 300??
answer in diam forum was "sorry, but you've the second person i've met who owns an diam300"
My diam300 is an HTC diamond german O2 version (round corners on cover)
Thanks for help!
Click to expand...
Click to collapse
the same for me, DIAM300, xda diamond from German o2 and the package don't work, stucks in boot process (text) earlier packages worked fine, tried to combine the the old package with the new one, but no luck :/
I have DIAM300 and it is working with this:
http://connect-utb.com/index.php?op...=file&Itemid=68&id=29:android-for-htc-diamond
matrix77 said:
I have DIAM300 and it is working with this:
http://connect-utb.com/index.php?op...=file&Itemid=68&id=29:android-for-htc-diamond
Click to expand...
Click to collapse
I used that download and it does not work for me have you changed anything or just download, unpack, copy to the phone and run haret.exe?
for me it always "hangs" at:
[ xxx.xxxxxx] msmfb_start_dma 90.yyy ms vsync request
the xxx.xxxxx is counting and the yyy is changing but "random" ..
I didn't change anything, it works fine but when I lock the screen I must reset the phone because I can't unlock it in Android.
matrix77 said:
I didn't change anything, it works fine but when I lock the screen I must reset the phone because I can't unlock it in Android.
Click to expand...
Click to collapse
hm.. okay, thank you
My DIAM 300 hangs at msmfb_start_dma 90.yyy ms vsync request :-(
Any solution? PLZ!!!!!!!!!!
Hi all,
I installed android package, few minutes ago, and it works fine.
Unfortunately, usage is little bit difficult beacuse of the missing application, or not manageable. Using the media player or during a phone call, it is not possible to listen audio with the headphones?
It is possible to install usefull application as TomTom?
divxmaniak said:
Hi all,
I installed android package, few minutes ago, and it works fine.
Unfortunately, usage is little bit difficult beacuse of the missing application, or not manageable. Using the media player or during a phone call, it is not possible to listen audio with the headphones?
It is possible to install usefull application as TomTom?
Click to expand...
Click to collapse
audio support is not complete on most devices. Not managed to boot properly into diamond version yet because of same issue as mentioned above. suggest trying the other zImage, it might work better.
your usual apps are written for windows mobile....you are no longer using windows mobile, you are using android. If TomTom write an android version then maybe you can run it....until then, no.
Just downloaded and installed Android for HTC Touch Pro and my Touch Pro boot succesfully. I managed to get to the "SIM card is locked" screen, however when i enter my PIN code i get "Incorrect PIN code. I know i have entered the correct PIN code.
Anybode else experienced this or have a suggestion what i could do.
Thanks
Nevermind, i found the solution at Connect-UTB's forum:
Q: When launching Android, it asks for my PIN-code, but it doesnt accept the one i type in!
A: You have to disable the PIN-Code authentication in Windows Mobile before booting up Android.
Got a Solution in the extracted folder there is the kernel _old rename it
hi guys new to this site. i have seen lots of your threads, looks great.
now i have a problem with my htc hd2...
story:
i have used a site allot too download som pretty cool stuff its called mobile9.
but today i downloaded a new screen lock its called HD2 Mini lock screen, from mobile9. this is a newly develoed software. i download all software by using the phone.
sow when i install the program it asks me if i want to ree-boot the phone for proper install. i do sow and the phone starts up. but the screen lock is the first thing i see. now i haven't given it any password. but to get past it i need some sort of password. i have no idea what to do... help me please
mr.nik89 said:
hi guys new to this site. i have seen lots of your threads, looks great.
now i have a problem with my htc hd2...
story:
i have used a site allot too download som pretty cool stuff its called mobile9.
but today i downloaded a new screen lock its called HD2 Mini lock screen, from mobile9. this is a newly develoed software. i download all software by using the phone.
sow when i install the program it asks me if i want to ree-boot the phone for proper install. i do sow and the phone starts up. but the screen lock is the first thing i see. now i haven't given it any password. but to get past it i need some sort of password. i have no idea what to do... help me please
Click to expand...
Click to collapse
Try this brilliant workaround:
http://forum.xda-developers.com/showpost.php?p=5820300&postcount=162
this is a good way to get around the sceen lock, but i have not
established a partnership between your phone and a Windows PC via active sync
mr.nik89 said:
this is a good way to get around the sceen lock, but i have not
established a partnership between your phone and a Windows PC via active sync
Click to expand...
Click to collapse
sorry to hear that. Can you establish a guest connection with your pc? If so, maybe you can install the original HD2 lockscreen again.
(or do a hard reset.)
how do i establish a guest connection with mi pc?
mr.nik89 said:
how do i establish a guest connection with mi pc?
Click to expand...
Click to collapse
connect to your pc and answer "no" if activesync of mobiledevices thingy ask if you want to establish a partnership
when i connect to my pc it only seys that the device is locked. so i have no opsions.
any new suggestions?
i realy need help with this one
i just hard reset my htc hd2 and now everything is running smooth... thanks for the help