Yesterday I tried to install the official motorola GB in Froyo but in the way my computer was not enough space to complete the download and installation, after that, he was appearing on a screen with the message "code corrupt", tried to use rsd lite to go back to 2.2 and then update again, but the screen is all black and only the light illuminates the usb. Would anyone know give me a hand?
PS: When i used the rsd lite, during the process apears on screen sw update, or something like that, but, when finishes with "Finished / Pass" it's all black =/
Thanks in advance
Sorry about my english.
download again SFB of GB...
what version of RSD are you using ?
I advise you use this:
RSD Lite 5.6
try flash again...
VooDooKill said:
download again SFB of GB...
what version of RSD are you using ?
I advise you use this:
RSD Lite 5.6
try flash again...
Click to expand...
Click to collapse
Worked fine! Thanks!!
Dear users
I have a Motorola XPRT Sprint and you know its firmware is
1FF-p3-kronos_cdma_kronos-user-2.22-.2-KRNS-X4-1.1.10-110916-release-keys-Sprint-US.sbf
froyo2.2
Iwanted to install gingerbread 2.3.5 and installed it from sd card with recovery menu
but I decided to turn back orginal firmware
I installed
1FF-p3-kronos_cdma_kronos-user-2.22-.2-KRNS-X4-1.1.10-110916-release-keys-Sprint-US.sbf
with RSD Lite
my device stuck boot menu and couldn't start,
it shows:
Bootloader
04.02
Err:A5.70.70.1F (or sometimes Err:A5.70.70.00)
Mem Map Blank
Service Req'd
Battery ok
ok to program
connect usb
Data cable
what can I do?
how can I reinstall bootmenu (bootloader)?
or firmware?
please I need your help
thank you
alican__1976 said:
Dear users
I have a Motorola XPRT Sprint and you know its firmware is
1FF-p3-kronos_cdma_kronos-user-2.22-.2-KRNS-X4-1.1.10-110916-release-keys-Sprint-US.sbf
froyo2.2
Iwanted to install gingerbread 2.3.5 and installed it from sd card with recovery menu
but I decided to turn back orginal firmware
I installed
1FF-p3-kronos_cdma_kronos-user-2.22-.2-KRNS-X4-1.1.10-110916-release-keys-Sprint-US.sbf
with RSD Lite
my device stuck boot menu and couldn't start,
it shows:
Bootloader
04.02
Err:A5.70.70.1F (or sometimes Err:A5.70.70.00)
Mem Map Blank
Service Req'd
Battery ok
ok to program
connect usb
Data cable
what can I do?
how can I reinstall bootmenu (bootloader)?
or firmware?
please I need your help
thank you
Click to expand...
Click to collapse
I am too. Please help me! Thank you very much..
cutung
cutung said:
I am too. Please help me! Thank you very much..
cutung
Click to expand...
Click to collapse
have you try using droid pro gingerbread sbf?
I am stuck too..
ozzone said:
have you try using droid pro gingerbread sbf?
Click to expand...
Click to collapse
Can you give me the link to download droid pro gingerbread sbf ? I try to reflash my XPRT with it by using RSD.
Thank you very much.
cutung
Let me know if you get any success..
Sent from my XT862 using Tapatalk 2
Flash the Boost Gingerbread SBF and you will recovery your phone.
http://forum.xda-developers.com/showthread.php?t=1858403
For use in Sprint, you might have to flash the Sprint update.zip again. Not sure about it. but GSM works out of US.
Hi kapil,
Did u flash the Boost GB sbf on ur XPRT and used in India?? Mine is stuck contacting the server...unable to open any menu...i got in US...rooted...screwed...factory reset and ended up like this.
Your inputs will be of utmost value to me now!!
Thanks,
Rao
bytebrahma said:
Hi kapil,
Did u flash the Boost GB sbf on ur XPRT and used in India?? Mine is stuck contacting the server...unable to open any menu...i got in US...rooted...screwed...factory reset and ended up like this.
Your inputs will be of utmost value to me now!!
Thanks,
Rao
Click to expand...
Click to collapse
It would be stuck on "Contacting Network" for at least 2-3 minutes and than continue further.
Since you cant root the phone and remove the Sprint/Boost Activation files. You need the SPC and use CDMA workshop to change type to RUIM only. That would remove the Contacting Network.
kapilthio said:
It would be stuck on "Contacting Network" for at least 2-3 minutes and than continue further.
Since you cant root the phone and remove the Sprint/Boost Activation files. You need the SPC and use CDMA workshop to change type to RUIM only. That would remove the Contacting Network.
Click to expand...
Click to collapse
No. it just goes on. Actually when it says 'contacting network', I would press power button to select airplane mode and boot into. But then it says 'Communicating with the server' and this one would go on for hours! (I actually observed it).
Because the only screen it shows is of 'Communicating with Server' and I cannot open ANY application/menu. at this point I dont think I can root. Please confirm.
Also the links to download the Gingerbread sbfs are prompting to install 'Livid' before downloading....isnt there any better link?
Thanks for the quick reply...its like a ray of hope... Long back I had scoured so many forums regarding this only to see dead ends...Please cling on and help me resurrect my XPRT
WRONG SBF
alican__1976 said:
Dear users
I have a Motorola XPRT Sprint and you know its firmware is
1FF-p3-kronos_cdma_kronos-user-2.22-.2-KRNS-X4-1.1.10-110916-release-keys-Sprint-US.sbf
froyo2.2
Iwanted to install gingerbread 2.3.5 and installed it from sd card with recovery menu
but I decided to turn back orginal firmware
I installed
1FF-p3-kronos_cdma_kronos-user-2.22-.2-KRNS-X4-1.1.10-110916-release-keys-Sprint-US.sbf
with RSD Lite
my device stuck boot menu and couldn't start,
it shows:
Bootloader
04.02
Err:A5.70.70.1F (or sometimes Err:A5.70.70.00)
Mem Map Blank
Service Req'd
Battery ok
ok to program
connect usb
Data cable
what can I do?
how can I reinstall bootmenu (bootloader)?
or firmware?
please I need your help
thank you
Click to expand...
Click to collapse
You need the 2.3 sbf or it will cause a bootloader error and softbrick the phone get the right one and enter the bootloader then flash using rsdlite
i flashed my defy 1st with T-Mobile_MB525_6.19.0_1FF.sbf its camera was not working then i try another TMobile us sbf when i flashed that it gives error codt not correct and stuck on boot menu logo then i try to flash it back with the T-Mobile_MB525_6.19.0_1FF file now the flashing completed but phone didnt show any display any solution now ???my phone was korean defy red lenz i try to convert it to european but phone didnt even booting
sunshine4u said:
i flashed my defy 1st with T-Mobile_MB525_6.19.0_1FF.sbf its camera was not working then i try another TMobile us sbf when i flashed that it gives error codt not correct and stuck on boot menu logo then i try to flash it back with the T-Mobile_MB525_6.19.0_1FF file now the flashing completed but phone didnt show any display any solution now ???my phone was korean defy red lenz i try to convert it to european but phone didnt even booting
Click to expand...
Click to collapse
read the beginners guide http://forum.xda-developers.com/showthread.php?t=1216982
Then search for appropriate SBF for your Defy
Just reboot. The first boot after flashing a new SBF always takes too long.
Please ask all questions in the Q&A section. Thread moved there.
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
TheFr1tZ said:
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
Click to expand...
Click to collapse
Reflash another SBF... did you try flashing an éclair sbf by mistake?
What was your BL?
Try one of the BL5 froyo sbfs... Nordic seems to be rather popular... check the BL version before you flash, try out BL 5, but I'd suggest you think twice and ask for more help before flashing a BL6 sbf.
krushnam said:
Reflash another SBF... did you try flashing an éclair sbf by mistake?
What was your BL?
Try one of the BL5 froyo sbfs... Nordic seems to be rather popular... check the BL version before you flash, try out BL 5, but I'd suggest you think twice and ask for more help before flashing a BL6 sbf.
Click to expand...
Click to collapse
The problem is when i conect it to the pc it doesent turn on , and the RSD Lite doesent see it ( and i dont know another way to reflash it (
And the BL is 9.10
TheFr1tZ said:
The problem is when i conect it to the pc it doesent turn on , and the RSD Lite doesent see it ( and i dont know another way to reflash it (
And the BL is 9.10
Click to expand...
Click to collapse
Ya BL is 9.10 for all, bit there's (sub) versions of it like CG4 ,CG5 CG6 & CG7. So most people just say BL6 BL7 etc. That's what I meant.
CG Version 2: SBF 2.21 / 2.34 /
Chinese (Éclair) (Defy)
CG Version 3: SBF 2.51 (Éclair) (Defy)
CG Version 4: SBF 3.4.2 (Froyo) (Defy)
CG Version 5: SBF 4.5.0 / 4.5.1
(Gingerbread) (Defy)
CG Version 6: SBF 4.5.1 (Gingerbread,
2.3.6, (Red lens Defy/Defy+) )
CG Version 7: SBF 4.5.1 (Latests
Gingerbreads, 2.3.6, (Red lens Defy/
Defy+) )
If you try to flash a lower ID version
than the one already on your phone, you
will just get a Black screen after booting
or a screen telling you to flash an
official rom.
So, with this in mind, you can now hop
between Android versions without
screwing up your phone.
This thread explains everything: http://forum.xda-developers.com/showthread.php?t=1216982
Use an external charger or another phone to fully charge your battery and then plug it in and RSDLite will detect it.
My Defy is not turnng on
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Same situation
jayanth1255 said:
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Click to expand...
Click to collapse
HI there Jayant ... i am in a situation like yours ....
my defy will not turn on ... battery is ok ... i have 2 batteries and its not turning on at all ... no led lights up .. no screen is on ...
wanted to know how did you managed to sort out your problem
please help me if you can
Hi, I am in a similar situation that my defy wont boot up (no screen activity) after I flashed the official Froyo ( Ver 4). The problem is that i bought it second hand and some miui rom (gingerbread) was installed in it with second init active with prerooted. I wanted official Froyo, dont know what was the highest version installed in it. Later tried to install the Nordic Froyo SBF, it didn't help either.
I have another defy on the same miui built (which is working normally and used for charging the dead defys battery), dont know what to do with the soft-bricked one. Which sbf to flash to make it work again.
jayanth1255 said:
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Click to expand...
Click to collapse
exactly the same situation here. Someone pls come up with a solution I don't want to believe that the phone is now useless by a software problem there must be a solution
Have you tried charging through external battery charger or the mcgyver method?
Sent from my Nexus 7 using Tapatalk
Flashing a bl6 sbf helped out. The sbf I used was dfp-125. Made my defy into defy plus though and only after that it booted. Can root and install secondinit on it for further flashing. Once you get to the red motor logo after flashing, you might have to wipe data cache from stock recovery.
Hope this helps.
Sent from my MB525 using xda app-developers app
Charging problem
TheFr1tZ said:
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
Click to expand...
Click to collapse
Make a downgrade on defy results: Brick your device!
1st attempt: Plug in the PC and wait a green led (means your battery it´s above 80% charged)... Be patient!!!
2nd attempt: You must to have/do one "factory cable"(searchable in CM´s foruns) to charge the battery. To be recognized by the RSD Lite you need to keep the "factory cable" to do a downgrade.
A link that helps: http://forum.xda-developers.com/showthread.php?t=2500789
ibtihaaz said:
HI there Jayant ... i am in a situation like yours ....
my defy will not turn on ... battery is ok ... i have 2 batteries and its not turning on at all ... no led lights up .. no screen is on ...
wanted to know how did you managed to sort out your problem
please help me if you can
Click to expand...
Click to collapse
Same situation...
No solution found?
Guys please help me with my broken firmware.
I have Defy plus mb256 bl 9.1 and tried so many different sbf, but i am stucked on bl screen with err: A5,69,35,00,27
When i use RSDlite it looks evrything is ok, and finaly typed Pass as result of flashing. But when i power the phone have Moto logo for a minute then bootloader screen with that error. I guess its from bad sbf. sbf.droid-developers works no longer and i cant find enough sbf files. So please provide a link for the right sbf files i need.
Thank you in advance.