Database Users

HELP! stuck on HTC Smart mobility black screen

My phone is stuck on HTC SMART MOBILITY black screen, the one that appears right away when u turn ur phone on. I was trying to upgrade the new rom and it said everythin was finished and it restarted the phone by itself then it got stuck in this screen. The thing is that the USB it is not recognize either by the computer or phone so i cannot do anything with the computer in order to boot up. I tried hard resets and nothin. Any help or ideas welcome... thanks

have you tried using bootloader mode? if I'm not mistaken, you need to hold the Power and Camera buttons while resetting the phone. you could then try to flash a new ROM on the phone. hope it helps!

miguel is correct. Put it into bootloader mode like he said, then flash a ROM back onto it and you should be good to go. This happened to me last night and I freaked out a little bit, but everything was fine after I did this.

Help, I'm stuck too. My phone is now in a loop of the black HTC smart mobility screen. I entered bootloader menu and reflashed the 2.17 ROM. -Which completed to 100% and no luck. I've tried this twice. I've entered the bootloader and tried to flash the stock ROM. It finished, but has no radio? What shold I do, Please help!!!
I must also mention that I was in the middle of relocking the phone after I installed the leaked ROM when my computer got the BSOD.

Format a sd card to fat32, place the image on the sd card, name it TITAIMG.nbh and reset to BL it will auto flash the rom and works when this happens

whwaldrep said:
Format a sd card to fat32, place the image on the sd card, name it TITAIMG.nbh and reset to BL it will auto flash the rom and works when this happens
Click to expand...
Click to collapse
By "Image" do you mean the rom .exe file?

johnannie said:
By "Image" do you mean the rom .exe file?
Click to expand...
Click to collapse
not exactly, the .exe file is simple an auto extracting archive, if you extract it, you will get a bunch of files, one which is about 40-60MB in size and that ends in a .nbh extension, that's the one you need.

You guys are awesome. It worked Thank you!
So why does everyone mess around with "relocking" the device and then flashing the 2.17 ROM after trying the 3.16 version when all you have to do is flash is with an sd card? It's SO easy!!!! Thanks again!

johnannie said:
You guys are awesome. It worked Thank you!
So why does everyone mess around with "relocking" the device and then flashing the 2.17 ROM after trying the 3.16 version when all you have to do is flash is with an sd card? It's SO easy!!!! Thanks again!
Click to expand...
Click to collapse
What radio are you using? Did flashing from the SD downgrade the radio as well?

theFear13ss said:
What radio are you using? Did flashing from the SD downgrade the radio as well?
Click to expand...
Click to collapse
I'm pretty sure that it did. When I tried to downgrade to 2.17, the flash worked, but there was no Radio at all. So I tried to reflash the 3.16 and it flashed but didn't work (endless boot to the HTC Screen over and over)
So I tried the SD card method or flashing back to the 2.17 and it worked absolutely perfectly. The only issue was that there was no MSID or MDN but I wrote those down.

Same problem, but turns off
Hey.
I have the same problem, I'm stuck at the "smart mobility" screen. But my problem is that it turns down after some sek with the smart mobility screen.
What should i do??

hii
i have the same problem with smart mobility i bought the phone htc touch from e-bay (gray coulor) and i its didnt work from the begining and the problem is that i dont know what originaly rom it had.
i try to flash rom from the computer(vista) roms (blue, green, new blue,red, 1.11.707.1b_4mb ,e_1.11.707.1b_4mb _4.1.13.42, 1.1b_4.1.12.42_02.93.90_ship,) none of them work some of them update till 3% and some of them till 100% but very fast and then its reset and i get error 270
someone got an idea for me?

Hello,
I need help to!!!
I`m stuck on the same screen. I did the sd card thing but after going to BL screen it flashes for a second to a screen with "Loading" and then return to BL where it stays. Down on screen it says "Serial".
WHAT SHALL I DO? PLEASE HELP!

helo
hi where dose one get that atach file

where does one get the attach file to copy on the sd card, course my phone has also stuck on the smart mobilety black screen

miguelfp1 said:
have you tried using bootloader mode? if I'm not mistaken, you need to hold the Power and Camera buttons while resetting the phone. you could then try to flash a new ROM on the phone. hope it helps!
Click to expand...
Click to collapse
thank you so much it work well
i hardly belive the guy at sprint store have my phone for one day and shake their head

Stuck on SMART MOBILITY
guys pls help,
My Phone is p3400i
I am stuck on the smart mobility screen..My screen says
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
Pls also give the links of the files, to download, to solve the issue.

sethanuj said:
guys pls help,
My Phone is p3400i
I am stuck on the smart mobility screen..My screen says
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
Pls also give the links of the files, to download, to solve the issue.
Click to expand...
Click to collapse
turn on your device, remove and replace the batteries then go to boot loader mode ( hold the Power and Camera buttons ) you immediately install the rom upgradeshttp !!! You can download it at ://www.htc.com/www/SupportDownload.aspx?p_id=10&cat=0&dl_id=609 good luck

hi to all friend
is there a way for copy arabic font to htc smart?
it's so necessary , i need it
plz help me
as soon as u can
tnx

smart mobility
hello friend
i am having htc p3400 i tried upgrading wm6.5 on it while installing it it shows congrats........ you have updated your rom but when it restart it only shows smat mobility nothing can be done further i tried it many times same problem occurs
one of us advised me to use the memory card techn...to place the image named TITAIMG.nbh but it doesn't solve my issue can any one provide me proper way to solve it
thanks in advance

[Q] Phone locked up on boot. Did I brick it?

Recently flashed to NSFfans 6.5 WM rom. I couldn't activate the phone on my account because it wouldn't take the ##...# codes.
Long story short I attempted flashing Bigstorage_SprintTouchRom.exe to try and get back to sprint software where I could use the ## codes.
Everything went smoothly until first boot when it stopped at the "HTC smart mobility" screen. I then hard reset it (send+end+reset button on bottom) and it is still locking up on that screen.
Did I just break my phone?

Thread moved to General.
No, you didn't brick it. It simply sounds like a bad flash.
Try flashing to another rom and see what happens. Which unlocker did you have on? 2.31 or .41?
BTW, if your ## codes don't work is probably because you are using a themed dialer. NFS' rom has a folder under Start Menu that is called "Phone Codes". In there, you will find the PST shortcut, which will allow you to program your phone.

if you can get into the bootloader (tri-color screen) then you haven't bricked it.

Sorry for posting in the wrong forum.
How can I get to the boot loader if the phone stays at the "HTC smart mobility" boot screen?
I tried using the rom update utility but it's not connected so it won't do anything.
---------------------------------------------
Edit: Okay, I have successfully re-flashed back to 6.5. The bootloader can be accessed by turning on the phone while pressing the camera button.
I am using 2.31 unlocker. When I try and activate the phone again what do I need to change in the phone codes to make it work?
Thanks guys.

Jacob_newton said:
Sorry for posting in the wrong forum.
How can I get to the boot loader if the phone stays at the "HTC smart mobility" boot screen?
I tried using the rom update utility but it's not connected so it won't do anything.
---------------------------------------------
Edit: Okay, I have successfully re-flashed back to 6.5. The bootloader can be accessed by turning on the phone while pressing the camera button.
I am using 2.31 unlocker. When I try and activate the phone again what do I need to change in the phone codes to make it work?
Thanks guys.
Click to expand...
Click to collapse
Under the PST programming, more than likely you will only need to change:
MSID
MIN
HOMESID
username and password (for internet)
You shouldn't need to mess with anything else afaik.

i cant make my phone go up normaly
i have the same problem and i tried to flash with others rom's with no succes ... my phone still locked in start screen . i dont know what to do.. i still can flash normally but i dont know wich rom will get back my phone again.. anyone help me plz!!

Osiii said:
i have the same problem and i tried to flash with others rom's with no succes ... my phone still locked in start screen . i dont know what to do.. i still can flash normally but i dont know wich rom will get back my phone again.. anyone help me plz!!
Click to expand...
Click to collapse
Details, details - how have you flashed? Have you tried flashing from bootloader? Flashing a carrier rom from bootloader should do the trick.

mrkite38 said:
Details, details - how have you flashed? Have you tried flashing from bootloader? Flashing a carrier rom from bootloader should do the trick.
Click to expand...
Click to collapse
Its ok already fix it... =) but i think i need to start over again from unlock to flash it with another rom!

[Q] MS2 Died?

Yesterday I tried to install the official motorola GB in Froyo but in the way my computer was not enough space to complete the download and installation, after that, he was appearing on a screen with the message "code corrupt", tried to use rsd lite to go back to 2.2 and then update again, but the screen is all black and only the light illuminates the usb. Would anyone know give me a hand?
PS: When i used the rsd lite, during the process apears on screen sw update, or something like that, but, when finishes with "Finished / Pass" it's all black =/
Thanks in advance
Sorry about my english.

download again SFB of GB...
what version of RSD are you using ?
I advise you use this:
RSD Lite 5.6
try flash again...

VooDooKill said:
download again SFB of GB...
what version of RSD are you using ?
I advise you use this:
RSD Lite 5.6
try flash again...
Click to expand...
Click to collapse
Worked fine! Thanks!!

[R] HTC Panache Videotron Stock

After looking everywhere on the internet and only finding dead links I'm asking here if someone still had a copy of the
RUU_Glacier_Gingerbread_S_Videotron_CA_2.10.1530.1_Radio_12.55.60.25_26.09.04.26_M_release_188466_signed.exe
in order to unroot her panache. I did find the myTouch 4H but I really need the videotron one. Can some provide me a copy if you have any.
Thanks alot guys and girls I appreciate it

Looks like it could be this file: h**p://d-h.st/36x
I'm looking for the same file, my phone is stuck in boot loop and factory reset doesn't work.

Nope, that's not it.
I got mine working by pressing volume down button when Videotron logo shows up and now it boots in safe mode.

tt33333 said:
Nope, that's not it.
I got mine working by pressing volume down button when Videotron logo shows up and now it boot
my mb also stuck on mytouch 4g logo..
i try to wipe data via recovery its giving me error as fail pu..
might be only riff box or polar box can solve or problem..
hw this file will work for us plz tell me since from last 4 day i m daily searching stuff how to wake my mb from dead state..
plz reply:crying:
Click to expand...
Click to collapse

ok first of all....if u r getting stuck on logo or for that matter any screen...u r NOT hard bricked...so put the jtag away...unless u really wanna make sure u carry around a dead phone = brick!!!
I put in a link for you on ur other thread but will put it here as well to help rener.....rener I have a mobilicity panache n I was able to successfully root using this guide http://forum.xda-developers.com/showthread.php?t=1178912 just use that n u will be good to go
nilesh.wankhede said:
tt33333 said:
Nope, that's not it.
I got mine working by pressing volume down button when Videotron logo shows up and now it boot
my mb also stuck on mytouch 4g logo..
i try to wipe data via recovery its giving me error as fail pu..
might be only riff box or polar box can solve or problem..
hw this file will work for us plz tell me since from last 4 day i m daily searching stuff how to wake my mb from dead state..
plz reply:crying:
Click to expand...
Click to collapse
Click to expand...
Click to collapse

IndianKarmas said:
ok first of all....if u r getting stuck on logo or for that matter any screen...u r NOT hard bricked...so put the jtag away...unless u really wanna make sure u carry around a dead phone = brick!!!
I put in a link for you on ur other thread but will put it here as well to help rener.....rener I have a mobilicity panache n I was able to successfully root using this guide http://forum.xda-developers.com/showthread.php?t=1178912 just use that n u will be good to go
thnx 4 ur attention i will try now
Click to expand...
Click to collapse

P8 - bootloader issue

Hi Gents, Ladies
I have the GRA-L09 P8, single SIM south Africa. I installed B200 via SD card no issue, then tried to install I think B313 Romanian.? Not sure..
Device is now stuck in a boot loop - I see the boot animation, over an over....!!!!
I thought, and still think, I need a Huawei Bootloader unlock code, as the device doesnt seem to listen to Fastboot to flash another ROM.
Huawei site to obtain bootloader unlock codes seems to be having issues, and Huawei support will not assist. Right now I just wanna go back to the stock ROM and get my device back.
Any help would be appreciated - thanks gents, and ladies!

MontanaZA said:
Hi Gents, Ladies
I have the GRA-L09 P8, single SIM south Africa. I installed B200 via SD card no issue, then tried to install I think B313 Romanian.? Not sure..
Device is now stuck in a boot loop - I see the boot animation, over an over....!!!!
I thought, and still think, I need a Huawei Bootloader unlock code, as the device doesnt seem to listen to Fastboot to flash another ROM.
Huawei site to obtain bootloader unlock codes seems to be having issues, and Huawei support will not assist. Right now I just wanna go back to the stock ROM and get my device back.
Any help would be appreciated - thanks gents, and ladies!
Click to expand...
Click to collapse
Did you try to do a factory reset, when the phone is rebooting and the screen is black before you see the huawei logo you need to be fast here hold volume up + power button together at the same time to enter stock recovery you should be able to do a factory reset from there.
If this doesn't work try to install B200 rom put the dload folder in the sd card. Hold the 3 keys( volume up, volum down and power) to flash the rom make sure to hold the buttons when the screen is black and before you see the huawei logo.

Great I'm try these thanks - neither will format the SD card right? Can I use B200 from any region?

MontanaZA said:
Great I'm try these thanks - neither will format the SD card right? Can I use B200 from any region?
Click to expand...
Click to collapse
No, but use the B200 you installed before on your phone. If you want from another region make sure the rom you download CxxxB200 , the xxx part matches the one that came with your phone.

Unlock bootloader @P8
Hi, i borrow this same thread if OP wont get mad.
I got new P8 with newest firmware and emui. How can i unlock bootloader these days? That [email protected] or what was it, wont answer if you send an email and ask a code for unlocking.
BR. 0lta

0lta said:
Hi, i borrow this same thread if OP wont get mad.
I got new P8 with newest firmware and emui. How can i unlock bootloader these days? That [email protected] or what was it, wont answer if you send an email and ask a code for unlocking.
BR. 0lta
Click to expand...
Click to collapse
http://forum.xda-developers.com/huawei-p8/how-to/guide-install-twrp-root-systemless-t3325161 First step.

Rashad83 said:
http://forum.xda-developers.com/huawei-p8/how-to/guide-install-twrp-root-systemless-t3325161 First step.
Click to expand...
Click to collapse
Hmmh, i only get "server is busy" after trying to log in, and chinese text... hope it works some day..

0lta said:
Hmmh, i only get "server is busy" after trying to log in, and chinese text... hope it works some day..
Click to expand...
Click to collapse
It's working i just checked. make sure to select english in the select langauge.

It worked for us when we signed in with Facebook rather than registering on VMALL or whatever it is with email password..
Wierd I know..