got my new droid X 4 days ago rooted everything was fine.. came from a rooted droid 1 flashed numerous roms on my old droid... tried to install gummy jar rom today and now phone is bricked... i could get to bootloader but thats it.. tried sbf flash with rsd but nothing...tried with the new sbf file 2.3.32.. still no go.. i need help and advice.. bootloader screen has this on it.... 30.04 ERR: A5,70,70,00,1F.... NEW_MAP Blank... Service Reqd.... Help does anyone know what i should do??? rsd lite doesnt shows the sbf file but thats it.. bootloader screen constantly shows lo batt no matter plugged in constantly... bootloader screen now goes off when plugged into usb???? im completly stumped
it won't flash the sbf until the battery is charged, the .320 is the correct sbf for the 30.04 bootloader. You need to find a way to charge it or another battery.
hotwire the droid with an old USB cable. Google-
Bootloader 30.04 Battery Low Cannot Program
That shows you how to wire it up.
What version of windows are you using?
What version of RSDlite?
Do you have the drivers for your droid installed?
Bootloader image:
"Bootloader
D2.37
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
Connect USB
Data Cable"
Things already tried:
Flashing SBF Via RSD Lite in Windows
Flashing SBF Via Linux
Starting up in Recovery which does not work
Any other suggestions?
Help is very much appreciated and thank you in advance =)
I've had this problem before.
You probably used the wrong SBF file. Thats what I did to get that error. Also, when using RSDlite, be sure you are using version 4.9 That worked for me.
Download the correct SBF file from here:
h t t p://www.mydroidworld.com/forums/droid-2-discussion/5323-tbh-mydroidworld-present-droid-2-2-3-20-triple-threat.html
im having the same problem but rsdlite 4.9 wont even show my droid
You RSD lite 4.7 with Patch. Im new to this forum stuff so not sure how to post links but google Kimete Darkonion House of Pain Holy Grail. you will find everything on how to convert and fix your DROID 2
i flashed my defy 1st with T-Mobile_MB525_6.19.0_1FF.sbf its camera was not working then i try another TMobile us sbf when i flashed that it gives error codt not correct and stuck on boot menu logo then i try to flash it back with the T-Mobile_MB525_6.19.0_1FF file now the flashing completed but phone didnt show any display any solution now ???my phone was korean defy red lenz i try to convert it to european but phone didnt even booting
sunshine4u said:
i flashed my defy 1st with T-Mobile_MB525_6.19.0_1FF.sbf its camera was not working then i try another TMobile us sbf when i flashed that it gives error codt not correct and stuck on boot menu logo then i try to flash it back with the T-Mobile_MB525_6.19.0_1FF file now the flashing completed but phone didnt show any display any solution now ???my phone was korean defy red lenz i try to convert it to european but phone didnt even booting
Click to expand...
Click to collapse
read the beginners guide http://forum.xda-developers.com/showthread.php?t=1216982
Then search for appropriate SBF for your Defy
Just reboot. The first boot after flashing a new SBF always takes too long.
Please ask all questions in the Q&A section. Thread moved there.
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
TheFr1tZ said:
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
Click to expand...
Click to collapse
Reflash another SBF... did you try flashing an éclair sbf by mistake?
What was your BL?
Try one of the BL5 froyo sbfs... Nordic seems to be rather popular... check the BL version before you flash, try out BL 5, but I'd suggest you think twice and ask for more help before flashing a BL6 sbf.
krushnam said:
Reflash another SBF... did you try flashing an éclair sbf by mistake?
What was your BL?
Try one of the BL5 froyo sbfs... Nordic seems to be rather popular... check the BL version before you flash, try out BL 5, but I'd suggest you think twice and ask for more help before flashing a BL6 sbf.
Click to expand...
Click to collapse
The problem is when i conect it to the pc it doesent turn on , and the RSD Lite doesent see it ( and i dont know another way to reflash it (
And the BL is 9.10
TheFr1tZ said:
The problem is when i conect it to the pc it doesent turn on , and the RSD Lite doesent see it ( and i dont know another way to reflash it (
And the BL is 9.10
Click to expand...
Click to collapse
Ya BL is 9.10 for all, bit there's (sub) versions of it like CG4 ,CG5 CG6 & CG7. So most people just say BL6 BL7 etc. That's what I meant.
CG Version 2: SBF 2.21 / 2.34 /
Chinese (Éclair) (Defy)
CG Version 3: SBF 2.51 (Éclair) (Defy)
CG Version 4: SBF 3.4.2 (Froyo) (Defy)
CG Version 5: SBF 4.5.0 / 4.5.1
(Gingerbread) (Defy)
CG Version 6: SBF 4.5.1 (Gingerbread,
2.3.6, (Red lens Defy/Defy+) )
CG Version 7: SBF 4.5.1 (Latests
Gingerbreads, 2.3.6, (Red lens Defy/
Defy+) )
If you try to flash a lower ID version
than the one already on your phone, you
will just get a Black screen after booting
or a screen telling you to flash an
official rom.
So, with this in mind, you can now hop
between Android versions without
screwing up your phone.
This thread explains everything: http://forum.xda-developers.com/showthread.php?t=1216982
Use an external charger or another phone to fully charge your battery and then plug it in and RSDLite will detect it.
My Defy is not turnng on
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Same situation
jayanth1255 said:
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Click to expand...
Click to collapse
HI there Jayant ... i am in a situation like yours ....
my defy will not turn on ... battery is ok ... i have 2 batteries and its not turning on at all ... no led lights up .. no screen is on ...
wanted to know how did you managed to sort out your problem
please help me if you can
Hi, I am in a similar situation that my defy wont boot up (no screen activity) after I flashed the official Froyo ( Ver 4). The problem is that i bought it second hand and some miui rom (gingerbread) was installed in it with second init active with prerooted. I wanted official Froyo, dont know what was the highest version installed in it. Later tried to install the Nordic Froyo SBF, it didn't help either.
I have another defy on the same miui built (which is working normally and used for charging the dead defys battery), dont know what to do with the soft-bricked one. Which sbf to flash to make it work again.
jayanth1255 said:
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Click to expand...
Click to collapse
exactly the same situation here. Someone pls come up with a solution I don't want to believe that the phone is now useless by a software problem there must be a solution
Have you tried charging through external battery charger or the mcgyver method?
Sent from my Nexus 7 using Tapatalk
Flashing a bl6 sbf helped out. The sbf I used was dfp-125. Made my defy into defy plus though and only after that it booted. Can root and install secondinit on it for further flashing. Once you get to the red motor logo after flashing, you might have to wipe data cache from stock recovery.
Hope this helps.
Sent from my MB525 using xda app-developers app
Charging problem
TheFr1tZ said:
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
Click to expand...
Click to collapse
Make a downgrade on defy results: Brick your device!
1st attempt: Plug in the PC and wait a green led (means your battery it´s above 80% charged)... Be patient!!!
2nd attempt: You must to have/do one "factory cable"(searchable in CM´s foruns) to charge the battery. To be recognized by the RSD Lite you need to keep the "factory cable" to do a downgrade.
A link that helps: http://forum.xda-developers.com/showthread.php?t=2500789
ibtihaaz said:
HI there Jayant ... i am in a situation like yours ....
my defy will not turn on ... battery is ok ... i have 2 batteries and its not turning on at all ... no led lights up .. no screen is on ...
wanted to know how did you managed to sort out your problem
please help me if you can
Click to expand...
Click to collapse
Same situation...
No solution found?
My mobile got Bricked, i tried to unbrick it by using RSD Lite, when the RSD Lite finishes it says PASS and my phone should restart but it doesn't. It remains dead and I can't make it work. Now even if I want to start it with VOL UP and POWER button, nothing happens. I have a spanish Vodafone version, which ROM should I download? Although nothing appears on the screen, my PC still recognises it and it shows as connected on port 1 in RSD Lite. I've tried with various versions of ROMs but every time the same thing happens. Please help!
Have you tried the BL7 SBF?
yzeroy said:
Have you tried the BL7 SBF?
Click to expand...
Click to collapse
No, i did'nt try the "BL7 SBF", can you pls send me the link....
gbkanju said:
No, i did'nt try the "BL7 SBF", can you pls send me the link....
Click to expand...
Click to collapse
BL7 is a Defy+ SBF, which means camera won't work if you have a green lens defy. If you don't know what BL7 is, you should have read Zephyrot's guide. The link is available in the SBF thread in the android development section of the forum.
Link
http://forum.xda-developers.com/showthread.php?t=966537
The list with all the SBF-Files.