Hey Guys,
I accidentally wiped my system while wiping dalvik cache etc and im stuck at the boot logo, i can still access download mode and TWRP recovery.
I'm using the Galaxy Note 3 SM-N900W8 (Canadian) Model and at the download mode screen it would say
Odin Mode
Product Name: SM-N900W8
Current Binary: Custom
System Status: Custom
Reactivation Lock: Off
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x0
Qualcomm Secureboot: enable (CSB)
RP SWREV: S2. T2. R2, A2, P2
Write Protection: Enable
Any help please?
Wait... u had twrp on your phone an it DOES say knox warranry void 0x0? 100% sure?
---
For fixing try flash lastest and your original firmware (the one u had before the system wipe)
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Simpler than flashing the rom is to just flash TWRP again via ODIN from a pc.
You will be up and running
Sent from my SM-N900 using Tapatalk
Related
I tried to root my Note 3 SM-N900W8 with Odin 3.07. When ODIN showed passed, I removed the cable but the phone was stuck at keep rebooting showing:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
It never showed Set Warranty Bit: recovery
I had to remove the battery to stop the rebooting. After I turned on the phone at the Download Mode page, it shows the following:
ODIN MODE
PRODUCT NAME: SM-N900W8
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTION: Enable
UDC START
When I tested the phone with Root Checker whether it's rooted. The app said it is not rooted.
I tried to run ODIN to root the phone again and I ran into the same rebooting problem again.
I also cannot open the Recovery Mode screen (Volume up + Menu + power). The phone would show RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING but nothing happens after.
If anyone knows how to fix and root the phone, please kindly let me know.
Weird..double check if the rooting file(the 1 u downloaded frm chainfire) is for sm-n900w8 only..
Sent from my SM-N900 using XDA Premium 4 mobile app
hey everyone.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
last but not least. does this means my warranty wont work?
hey everyone out there that can help me
i tried to root my phone but it stopped midway. then i got it working again, but my dataroaming was disabled. so i did a factory reset and now it is stuck in Odin mode.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
I would Odin flash a recovery and format everything on the phone before attempting to odin flash official firmware.
Make sure you are flashing the latest 4.4 that your carrier has released.
http://www.sammobile.com/firmwares/
Just flash a 4.4.2 stock rom true Odin that is for you device.
WHEN I TRIED USING ODIN
FOR ROOTING
ODIN MODE
PRODUCT NAME:SM-900F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEN STATUS: OFFICIAL
REACTIVATION LOCK(KK): ON
KNOX WARRENTY VOIO: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1 T1 R1 A1 P1
UDC START
SECURE CHECK FAIL : RECOVERY
WHAT DO I NEED TO DO
PLS ADVICE
MY EMAIL
([email protected]):crying:
When i rooted my g900f it wasnt so long ago , i flashed twrp on odin then flashed in twrp supersu zip which can be found on chainfires web, google both , u'll find sumting
Try turning of your reactivation lock.
Reactivation lock would be my guess. It stops a lot of people until they turn it off.
It says:
Could not do normal boot.
ODIN MODE
PRODUCT NAME:SM-N900S
CURRENT BINARY:CUSTOM
SYSTEM STATUS:CUSTOM
REACTIVATION LOCKFF
KNOW WARRANTY VOID: 0X1 4
QUALCOMM SECUREBOOT: ENABLE CSB
RP SWREV: S2,T2,A2,A4,P2
SECURE DOWNLOAD:ENABLE
UDC START
How it happened:I just rooted my phone so i can install a rom on my sm-n900s but i didnt realise that it was for an sm-n900.I flashed it on my phone with flashify and now all i can do is go to my custom recovery TWRP to wipe everything but still to no avail.I really do not know what to do.PLS HELP :crying::crying::crying::crying::crying:
Look for a stock rom on sammobile.com. If you find it, flash it via Odin.
Btw, no need to root before installing a custom rom or recovery.
OMG MY PHONE WORKED.I used a stock rom and it worked although it booted up very slow.THANK YOU SO MUCH.
Could not do normal boot.
ODIN MODE
PRODUCT NAME:SM-N900S
CURRENT BINARY:SAMSUNG OFFICIAL
SYSTEM STATUS:CUSTOM
REACTIVATION LOCKFF
KNOW WARRANTY VOID: 0X1 4
QUALCOMM SECUREBOOT: ENABLE CSB
RP SWREV: S2,T2,A2,A4,P2
SECURE DOWNLOAD:ENABLE
UDC START
Could not do normal boot.
ODIN MODE
PRODUCT NAME:SM-N900L
CURRENT BINARY:CUSTOM
SYSTEM STATUS:CUSTOM
REACTIVATION LOCKFF
KNOW WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE CSB
RP SWREV: S2,T2,A2,A4,P2
SECURE DOWNLOAD:ENABLE
UDC START.
please help
yes bro
saiful aslam said:
Could not do normal boot.
ODIN MODE
PRODUCT NAME:SM-N900L
CURRENT BINARY:CUSTOM
SYSTEM STATUS:CUSTOM
REACTIVATION LOCKFF
KNOW WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE CSB
RP SWREV: S2,T2,A2,A4,P2
SECURE DOWNLOAD:ENABLE
UDC START.
please help
Click to expand...
Click to collapse
www.samsony.com
enter this link go go go