I think that my phone is bricked. It gives 7 vibration on start up and stuck at htc logo. I can get into bootloader mode and also installed USB driver and its showing USB also. But the problem is.. I have downloaded this stock firmware - RUU_Spark_Vodafone_UK_1.20.161.00_Spark_5.54.09_RELEASE
and when i tried to install this RUU its showing me.ERROR [294] : INVALID VENDOR ID .
I searched and installed HSPL through DFT and tried RUU to install and it was working but after 8% phone restarted to Bootloader mode and its again showing ERROR [294] : INVALID VENDOR ID..
Any suggestion guys?
My bootloader display.
PC40100 SS-BC (4K)
SPL-1.20.2250.0(117833)
MicroP(LED) 0x09
TOUCH A1(v10,20)
SD SANDISK 7580mb Class0
Partition Info-v211v413
nishangrg said:
I think that my phone is bricked. It gives 7 vibration on start up and stuck at htc logo. I can get into bootloader mode and also installed USB driver and its showing USB also. But the problem is.. I have downloaded this stock firmware - RUU_Spark_Vodafone_UK_1.20.161.00_Spark_5.54.09_RELEASE
and when i tried to install this RUU its showing me.ERROR [294] : INVALID VENDOR ID .
I searched and installed HSPL through DFT and tried RUU to install and it was working but after 8% phone restarted to Bootloader mode and its again showing ERROR [294] : INVALID VENDOR ID..
Any suggestion guys?
My bootloader display.
PC40100 SS-BC (4K)
SPL-1.20.2250.0(117833)
MicroP(LED) 0x09
TOUCH A1(v10,20)
SD SANDISK 7580mb Class0
Partition Info-v211v413
Click to expand...
Click to collapse
You'll need to build/buy a GoldCard and put a rom from your vendor onto the GoldCard flash card. This should allow you to fix your bootloader and switch vendors. If you arn't sure if your phone is a Vondafone version, you may have the original Trophy GSM, and need that instead.
Related
Hi,
When I was flashing Artemis WWE 3.13 Official update, due to my PC failure rom update failed at 99%. Now i cant boot my Artemis and its stuck at bootsplash. To use USPL , I need to ActiveSync it, but I can't as its not booting up. I tried flashing back same ROM but it gave me Invalid Update error. Please advise me any other way to do CID unlock(in bootloader) and flash it again.
Thanks
Nishant
My artemis/orbit has bricked aswell i have been told to try and sd card flash it do that see if it works for u
i was trying to flash the stock rom via sd method but it says updatde failed so i guess i got the wrong one bootloader says
PB81120 HX_B3
SPL-2.10.0000 8G XE
so which tmobile stock ROM i must use to restore thanks
Hi I tried to update the rom and now i'm unable to do anything
i can get it onto the tri colour screen with the following info
PB81100 HX-BC SPL-2.08.HSPL 8G XE CotullaHSPL 0x30
once i try to load anything else it get stuck in a new screen with this
LEOPB81100 HX-DC
cLK-1.6.5.0
HSPL 8G XX
Radio -unknown
boot recovery
boot sboot
continue normal boot
boot fail ! check boot/recovery partition try again!
tried to do all of these just returns me back here
i have printed a partition table and the largest size is
user data blocks 1960 size 245 mb
is my beloved leo destine for the bin??
help please
i don't think you bricked...just something got wrong with cLK. Try again every steps from task29
hi i tried task 29 but it just sits for ages and then comes up with an error message!
hi just tried it again, this time it loaded, but it now just shows the front HTC screen, whilst turning it on held the on key to try and get into cLK but nothing
of course, because task29 cleared cLK from nand...just flash cLK or magldr as usual, and then flash the recovery, and then install a rom from zip
sorry, just flash maglar v1.13, when it booted up it said kernel was missing??
trash2 said:
sorry, just flash maglar v1.13, when it booted up it said kernel was missing??
Click to expand...
Click to collapse
its normal after flashing mgldr. now you must find a rom. then make a cwm partition according to the needs of rom. then flash the rom from sd.
sorry to be a pain.
i wanted to put clk on but every time i go into usb flasher and try i get
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
i'm running window 7 does that make a difference
Flash clk from bootloader not magldr (but of course you knew this didnt you? having thoroughly read and understood the clk thread post 1, right?)
my device says on bootloader mode as
PB81100 SS-BC
SPL-1.66.HSPL XE
0x05
CotullaHSPL 0x50
when i try to flash this rom
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
all goes well and flashing completes 100% but phone does not boot
and says your os rom isnt costomised for ur hardware plz reflash the proper rom code
are you flashing with the right ROM from HTC official ?
try to do a task29 on HD2 NAND Toolkit and install the ROM again
now the phone gets restated before it boots
try change HSPL to 2.08
Hi All,
I have this device for a long time and I have flashed many roms...
Suddenly it's not possible to enter the "AD Recovery" in Magloader ClockworkMod Recovery.
it stuck after "1234 GO GO GO!"
I have tried the following:
1) Re-flash MAGLDR1.13.
2) Repartition with HD2Toolkit (I have European device so I repartition to 200)
Any suggestions?
Flash win mobile 6.5 and then flash magldr again
Sent from my HTC HD2 using Tapatalk 2
Hi All,
I m trying to go back from android to winmobile and my device is stuck...
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship and i have tried to flash HAED SPL 4 and i received error in device id...
In bootloader it appears correctly with SPL-2.08.HSPL 8G XE, and in the white eare it write Serial in in the begining and when I try to flash it change to USB.
The main problem is that I have tried to flash Energy.Leo.21916.Sense2.5.Jul.04 above android it stuck on 4% and I can't reflash anymore, when i try to reflash it stuck on 0% no matter what I do.
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
Please advice...
sagytb said:
I have this device for a long time and I have flashed many roms...
Suddenly it's not possible to enter the "AD Recovery" in Magloader ClockworkMod Recovery.
it stuck after "1234 GO GO GO!"
Click to expand...
Click to collapse
Been having the exact same problem (http://forum.xda-developers.com/showthread.php?p=29868470#post29868470) still noone with any ideas how to fix this?