Database Users

I Have problem about ad recovery in clockworkmod 1.3

i install clockworkmod 1.3 with 150mb partition when i access into AD recovery it's showing message
"Android load RAW
Error: Error can't read ramdisk image"
and i can't access AD recovery in every layout partition
Can i fix it
Plz helpp Plzzz

It probably didn't flash correctly. Just flash it again.

i install task29 and install magldr 1.13 and layout partition many time
it's just show only this error when i access in ad recovery

Try Here ..
http://forum.xda-developers.com/showthread.php?t=981811
And Look / Read / Do Everything In Post #2
DL Both : http://forum.xda-developers.com/attachment.php?attachmentid=534603&d=1299379821
And
http://forum.xda-developers.com/attachment.php?attachmentid=534591&d=1299378828
And Follow The Directions

i can access in ad recovery in the first time of installing magldr1.13 but in second time or another it´s show this error
sorry for my badly english

i tried this direction but it's same it's show error
WarlockW said:
Try Here ..
http://forum.xda-developers.com/showthread.php?t=981811
And Look / Read / Do Everything In Post #2
DL Both : http://forum.xda-developers.com/attachment.php?attachmentid=534603&d=1299379821
And
http://forum.xda-developers.com/attachment.php?attachmentid=534591&d=1299378828
And Follow The Directions
Click to expand...
Click to collapse

suddenly facing same problem, anyone has a solution other than reflashing from beginning again or trying other cwm layouts.
Also tried flashing original wm 6.5 rom, wm works without problem but again I receive same error when trying to load ad recovery from magldr.

hacker001 said:
i install clockworkmod 1.3 with 150mb partition when i access into AD recovery it's showing message
"Android load RAW
Error: Error can't read ramdisk image"
and i can't access AD recovery in every layout partition
Can i fix it
Plz helpp Plzzz
Click to expand...
Click to collapse
try to install clk instead of magldr ...and what will happend

mootmetal said:
try to install clk instead of magldr ...and what will happend
Click to expand...
Click to collapse
tried clk and no succes of booting, it stays on the green htc logo screen like the few other users who have this issue

[Q] Help i'm sure it's Bricked

Hi I tried to update the rom and now i'm unable to do anything
i can get it onto the tri colour screen with the following info
PB81100 HX-BC SPL-2.08.HSPL 8G XE CotullaHSPL 0x30
once i try to load anything else it get stuck in a new screen with this
LEOPB81100 HX-DC
cLK-1.6.5.0
HSPL 8G XX
Radio -unknown
boot recovery
boot sboot
continue normal boot
boot fail ! check boot/recovery partition try again!
tried to do all of these just returns me back here
i have printed a partition table and the largest size is
user data blocks 1960 size 245 mb
is my beloved leo destine for the bin??
help please

i don't think you bricked...just something got wrong with cLK. Try again every steps from task29

hi i tried task 29 but it just sits for ages and then comes up with an error message!

hi just tried it again, this time it loaded, but it now just shows the front HTC screen, whilst turning it on held the on key to try and get into cLK but nothing

of course, because task29 cleared cLK from nand...just flash cLK or magldr as usual, and then flash the recovery, and then install a rom from zip

sorry, just flash maglar v1.13, when it booted up it said kernel was missing??

trash2 said:
sorry, just flash maglar v1.13, when it booted up it said kernel was missing??
Click to expand...
Click to collapse
its normal after flashing mgldr. now you must find a rom. then make a cwm partition according to the needs of rom. then flash the rom from sd.

sorry to be a pain.
i wanted to put clk on but every time i go into usb flasher and try i get
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
i'm running window 7 does that make a difference

Flash clk from bootloader not magldr (but of course you knew this didnt you? having thoroughly read and understood the clk thread post 1, right?)

HTC Photon upgrade Nand Android Error

I can't not hold volum+ and Power ,Phone Error
Phone auto on Fast boot Mode
Error cannot read recover_header, Please Look in Picture
Error : cannot read the kernel image
Error : could not do normal boot,reverting fastboot mode
I can't not Previous windowmobile 6.5
Please Help Me,

Obviously you forgot to flash recovery...
As for windows, you need to enter the bootloader (volume down on boot, iirc) and flash via RUU

sp3dev said:
Obviously you forgot to flash recovery...
As for windows, you need to enter the bootloader (volume down on boot, iirc) and flash via RUU
Click to expand...
Click to collapse
Share Solution
USE Riff-Jtag Box Repair Boot- use XTC Clip S-Off CID-- Use Rom Ship Or Rom Cook Upgrade Phone is OK,
Good Luck
After Repair Boot Retry update Nand Android Phone hangOn LOGO cyannogen7mod After Auto Restart

please look video phone hand on logo

Done, Thank All
have a Good Day

[Q] a problem withe recovery "ERROR: ERROR: Cannot read ramdisk image"

Hello,
I am running android 2.3.7 [typhone v3.6.9- magldr]. I wanted to upgrade my rom, so I got into magldr and then to recovery, but when I choose "ad recovery" I get an error massage in red "ERROR: ERROR: Cannot read ramdisk image "
plese help ...
How can I solve this problem ?
thank's

Reflash recovery and then see it it's reproduces or not.

If you have do a task29,you have to reflash MAGLDR and the recovery who is needed for this ROM.Task29 delete MAGLDR and Recovery.

Maybe you need reflash your device recovery.

You really don't have to task29 your device.
Just download HD2 Toolbox, connect your HD2 to your PC and hit update in the left corner.
Thats it

Do I broke my HD Mini?

Hello,
I have serious problem with my phone. I bought HTC with windows mobile and some time ago I have installed Android from this topic http://forum.xda-developers.com/showthread.php?t=1455555 I chose nand-boot option so windows had been deleted from hard memory. Then 5days ago I decided to do an upgrade of Android. Downloaded new version of Android and tried to install it from old Android, system crashed and I can’t do anything in bootloader know. It's only this message:
nand id: 0x5500bcec maker=0xeo device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image: failed (319 errors)
ERROR: Cannot read recovery_header
flash_read_image: failed (5056 errors)
ERROR: Cannot read kernel image verting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start()
Click to expand...
Click to collapse
When I press Volume Up or Down nothing happens. So I decided back to windows but I have problem with install it. When I try to install original ROMs have this ERROR 294 -> Invalid vendor id. When try to install custom ROM with using SSPL I have other ERROR [262] -> Update error. I tried to installation from SD card but nothing happens in 3 colors bootloader.
Please help me…

http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)

tzacapaca said:
http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)
Click to expand...
Click to collapse
Hi I've the same problem, I don't know what to do, is there anyone who has got an hint?
I cannot reinstall the ROM because the damn INVALID VENDOR, I canno use SSPL_RUU.exe as suggested in this forum because it must be run from WM and not from the coloured strips screen..
is there a solution? please!

you should try your original WM ROM, or for android these aren't any problem.. it's because bad installation,

i broke my bootloader too. cant enter recovery or something else. someone an idea? :/

reinstall recovery from windows>usb>htcHDmini