I Have problem about ad recovery in clockworkmod 1.3 - HD2 Android Q&A, Help & Troubleshooting and Genera

i install clockworkmod 1.3 with 150mb partition when i access into AD recovery it's showing message
"Android load RAW
Error: Error can't read ramdisk image"
and i can't access AD recovery in every layout partition
Can i fix it
Plz helpp Plzzz

It probably didn't flash correctly. Just flash it again.

i install task29 and install magldr 1.13 and layout partition many time
it's just show only this error when i access in ad recovery

Try Here ..
http://forum.xda-developers.com/showthread.php?t=981811
And Look / Read / Do Everything In Post #2
DL Both : http://forum.xda-developers.com/attachment.php?attachmentid=534603&d=1299379821
And
http://forum.xda-developers.com/attachment.php?attachmentid=534591&d=1299378828
And Follow The Directions

i can access in ad recovery in the first time of installing magldr1.13 but in second time or another it´s show this error
sorry for my badly english

i tried this direction but it's same it's show error
WarlockW said:
Try Here ..
http://forum.xda-developers.com/showthread.php?t=981811
And Look / Read / Do Everything In Post #2
DL Both : http://forum.xda-developers.com/attachment.php?attachmentid=534603&d=1299379821
And
http://forum.xda-developers.com/attachment.php?attachmentid=534591&d=1299378828
And Follow The Directions
Click to expand...
Click to collapse

suddenly facing same problem, anyone has a solution other than reflashing from beginning again or trying other cwm layouts.
Also tried flashing original wm 6.5 rom, wm works without problem but again I receive same error when trying to load ad recovery from magldr.

hacker001 said:
i install clockworkmod 1.3 with 150mb partition when i access into AD recovery it's showing message
"Android load RAW
Error: Error can't read ramdisk image"
and i can't access AD recovery in every layout partition
Can i fix it
Plz helpp Plzzz
Click to expand...
Click to collapse
try to install clk instead of magldr ...and what will happend

mootmetal said:
try to install clk instead of magldr ...and what will happend
Click to expand...
Click to collapse
tried clk and no succes of booting, it stays on the green htc logo screen like the few other users who have this issue

Related

[Q] Help i'm sure it's Bricked

Hi I tried to update the rom and now i'm unable to do anything
i can get it onto the tri colour screen with the following info
PB81100 HX-BC SPL-2.08.HSPL 8G XE CotullaHSPL 0x30
once i try to load anything else it get stuck in a new screen with this
LEOPB81100 HX-DC
cLK-1.6.5.0
HSPL 8G XX
Radio -unknown
boot recovery
boot sboot
continue normal boot
boot fail ! check boot/recovery partition try again!
tried to do all of these just returns me back here
i have printed a partition table and the largest size is
user data blocks 1960 size 245 mb
is my beloved leo destine for the bin??
help please
i don't think you bricked...just something got wrong with cLK. Try again every steps from task29
hi i tried task 29 but it just sits for ages and then comes up with an error message!
hi just tried it again, this time it loaded, but it now just shows the front HTC screen, whilst turning it on held the on key to try and get into cLK but nothing
of course, because task29 cleared cLK from nand...just flash cLK or magldr as usual, and then flash the recovery, and then install a rom from zip
sorry, just flash maglar v1.13, when it booted up it said kernel was missing??
trash2 said:
sorry, just flash maglar v1.13, when it booted up it said kernel was missing??
Click to expand...
Click to collapse
its normal after flashing mgldr. now you must find a rom. then make a cwm partition according to the needs of rom. then flash the rom from sd.
sorry to be a pain.
i wanted to put clk on but every time i go into usb flasher and try i get
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
i'm running window 7 does that make a difference
Flash clk from bootloader not magldr (but of course you knew this didnt you? having thoroughly read and understood the clk thread post 1, right?)

ERROR: ERROR: Cannot read ramdisk image on HyperDroid

Everything works fine but I cannot access AD Recovery from MAGLDR after I flashed clockwork recovery to 3.1.0.0 from Rom Manager, I found out that messes up the clockwork recovery from MAGLDR, how can I undo this?
Did u tried to reflash recovery ?
Ultimately you can task 29 the phone right ?
Same Problem
I Have been having the same issue, any solutions?
I don't think MAGLDR can used to flash recoveries using Rom manger. I think only cLK can do that.
Please correct me if I'm wrong.
Same problem here! i tried 3 things:
1. removing some apps as suggested here: http://rootzwiki.com/topic/4198-cant-boot-into-the-new-cwm-recovery-heres-a-quick-fix/ and then went to rom manager and "reflashed" it says succesful but when selecting "boot into recovery" the phone just reboots back into andriod.
2. after 1 and went into magldr and manually selected AD recovery: still get the red errormessage
3. I also tried reflashing by going into magldr and using usb option and then running the DAF file. It says it is connected (so does my pc) but flashing from the DAF executable gives message
---
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
--
Strange thing is: i also get this message when my phone is not at all connected and i run the DAF.exe so i presume there is a connection problem?
What to do now?
---------- Post added at 05:46 PM ---------- Previous post was at 05:30 PM ----------
Ah, hope i can be of use. I solved my own issue: i forgot to run DAF with admin rights.
I also forgot that this reflashing wipes my android installation. Especially because i just wanted to make a new backup with CWM recovery. Gosh... how ironic.
MarsHD2 said:
Everything works fine but I cannot access AD Recovery from MAGLDR after I flashed clockwork recovery to 3.1.0.0 from Rom Manager, I found out that messes up the clockwork recovery from MAGLDR, how can I undo this?
Click to expand...
Click to collapse
Hello there!
When you've got <ERROR: ERROR: Cannot read ramdisk image> there is also a solution.
You've to be sure make a back-up of your SD-card onto you're PC and after you've copied your SD-card then have you formatting this SD-card onto PC or AndroidPhone.
Then when SD-card is formatted finished you have to download magldr 1.13 again and update via datacable and you're phone onto bootloadermenu (color-screened).
Than you've to download CWM recovery 3.2.0.0 and you upload this recovery also via bootloadermenu again (volume down) and when 100% ready you're phone gonna started up and you've push your powerbutton on and let button not go after you seen magldr 1.13 menu.
Then you gonne volume <up/down> and go to AD recovery and you wil see that the message <ERROR: ERROR: Cannot read ramdisk image> disappear and your phone works again normally without these error(s). :victory:

[Q] a problem withe recovery "ERROR: ERROR: Cannot read ramdisk image"

Hello,
I am running android 2.3.7 [typhone v3.6.9- magldr]. I wanted to upgrade my rom, so I got into magldr and then to recovery, but when I choose "ad recovery" I get an error massage in red "ERROR: ERROR: Cannot read ramdisk image "
plese help ...
How can I solve this problem ?
thank's
Reflash recovery and then see it it's reproduces or not.
If you have do a task29,you have to reflash MAGLDR and the recovery who is needed for this ROM.Task29 delete MAGLDR and Recovery.
Maybe you need reflash your device recovery.
You really don't have to task29 your device.
Just download HD2 Toolbox, connect your HD2 to your PC and hit update in the left corner.
Thats it

Do I broke my HD Mini?

Hello,
I have serious problem with my phone. I bought HTC with windows mobile and some time ago I have installed Android from this topic http://forum.xda-developers.com/showthread.php?t=1455555 I chose nand-boot option so windows had been deleted from hard memory. Then 5days ago I decided to do an upgrade of Android. Downloaded new version of Android and tried to install it from old Android, system crashed and I can’t do anything in bootloader know. It's only this message:
nand id: 0x5500bcec maker=0xeo device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image: failed (319 errors)
ERROR: Cannot read recovery_header
flash_read_image: failed (5056 errors)
ERROR: Cannot read kernel image verting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start()
Click to expand...
Click to collapse
When I press Volume Up or Down nothing happens. So I decided back to windows but I have problem with install it. When I try to install original ROMs have this ERROR 294 -> Invalid vendor id. When try to install custom ROM with using SSPL I have other ERROR [262] -> Update error. I tried to installation from SD card but nothing happens in 3 colors bootloader.
Please help me…
http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)
tzacapaca said:
http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)
Click to expand...
Click to collapse
Hi I've the same problem, I don't know what to do, is there anyone who has got an hint?
I cannot reinstall the ROM because the damn INVALID VENDOR, I canno use SSPL_RUU.exe as suggested in this forum because it must be run from WM and not from the coloured strips screen..
is there a solution? please!
you should try your original WM ROM, or for android these aren't any problem.. it's because bad installation,
i broke my bootloader too. cant enter recovery or something else. someone an idea? :/
reinstall recovery from windows>usb>htcHDmini

[Q] unable to flash new roms

Hi All,
I have this device for a long time and I have flashed many roms...
Suddenly it's not possible to enter the "AD Recovery" in Magloader ClockworkMod Recovery.
it stuck after "1234 GO GO GO!"
I have tried the following:
1) Re-flash MAGLDR1.13.
2) Repartition with HD2Toolkit (I have European device so I repartition to 200)
Any suggestions?
Flash win mobile 6.5 and then flash magldr again
Sent from my HTC HD2 using Tapatalk 2
Hi All,
I m trying to go back from android to winmobile and my device is stuck...
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship and i have tried to flash HAED SPL 4 and i received error in device id...
In bootloader it appears correctly with SPL-2.08.HSPL 8G XE, and in the white eare it write Serial in in the begining and when I try to flash it change to USB.
The main problem is that I have tried to flash Energy.Leo.21916.Sense2.5.Jul.04 above android it stuck on 4% and I can't reflash anymore, when i try to reflash it stuck on 0% no matter what I do.
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
Please advice...
sagytb said:
I have this device for a long time and I have flashed many roms...
Suddenly it's not possible to enter the "AD Recovery" in Magloader ClockworkMod Recovery.
it stuck after "1234 GO GO GO!"
Click to expand...
Click to collapse
Been having the exact same problem (http://forum.xda-developers.com/showthread.php?p=29868470#post29868470) still noone with any ideas how to fix this?

Categories

Resources