[Q] Cant Boot Into Recovery Mode - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

I have been trying to get into Recovery Mode for a couple of weeks now. After reading and trying many things I finally decided to ask for help. If you have any suggestions it would be GREATLY appreciated!
Samsung Galaxy S4 AT&T Rooted (checked with Root Checker and also runs Titanium Backup completely)
Rooted using this method: http://forum.xda-developers.com/showthread.php?t=2387577
When I power off the phone and then hold power, volume up, and home. When vibrate I let loose of power and continue to hold volume up and home. Then I get the screen "Downloading...Do not turn off target!!
Also says:
"Could not do normal boot"
"ODIN MODE"
"PRODUCT NAME: SGI-1337"
"CURRENT Binary Samsung Official"
"SYSTEM STATUS: Official"
"CSB-CONFIG-LSB: 0X30"
'WRITE PROTECTION: Enable"
Rom Manager says: "RECOVERY ALREADY INSTALLED: ClockworkMod Recovery and Team Win Recovery Project (TWRP)
When I try to use Rom Manager to reboot into recovery I get the same downloading screen.
Why I am trying to do this: I would like to install Cyanogenmod 11 if possible.
Again any suggestions greatly appreciated!!

Hold power + vol down
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jd1639 said:
Hold power + vol down
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
When i do that I get: "Warning!!! A custom OS can cause critical problems in your phone and installed applications. Installing Custom OS on your device may cause it to shut down as a result. Please see manual for details. If you want to download a custom OS press the volume up key. Otherwise press the volume down key to cancel. Volume up: Continue Volume down: Cancel (restart phone)"
When I click volume up it takes me to the downloading screen same as before.
THANKS for trying, but that doesnt appear to the answer.

tinypic dot com/r/15f3f45/5 (sorry had to do it that way to post it.)
Pics from Root Checker and Rom Manager if it helps.

soonerchad said:
I have been trying to get into Recovery Mode for a couple of weeks now. After reading and trying many things I finally decided to ask for help. If you have any suggestions it would be GREATLY appreciated!
Samsung Galaxy S4 AT&T Rooted (checked with Root Checker and also runs Titanium Backup completely)
Rooted using this method: http://forum.xda-developers.com/showthread.php?t=2387577
When I power off the phone and then hold power, volume up, and home. When vibrate I let loose of power and continue to hold volume up and home. Then I get the screen "Downloading...Do not turn off target!!
Also says:
"Could not do normal boot"
"ODIN MODE"
"PRODUCT NAME: SGI-1337"
"CURRENT Binary Samsung Official"
"SYSTEM STATUS: Official"
"CSB-CONFIG-LSB: 0X30"
'WRITE PROTECTION: Enable"
Rom Manager says: "RECOVERY ALREADY INSTALLED: ClockworkMod Recovery and Team Win Recovery Project (TWRP)
When I try to use Rom Manager to reboot into recovery I get the same downloading screen.
Why I am trying to do this: I would like to install Cyanogenmod 11 if possible.
Again any suggestions greatly appreciated!!
Click to expand...
Click to collapse
You cannot run custom recovery on att mk3,only safestrap. Sounds like you toasted your recovery. Youll need to find some guides to flash back the stock recovery with odin, maybe another method. Lots of guides here for this sort of thing.
Sent from my SGH-I337M

Download goomanager from the app store. There's an option there that allows you to reboot into recovery from the app. That's the only way that works for me, maybe you should try that.
Sent from my SGH-I337M using xda app-developers app

azuziel said:
You cannot run custom recovery on att mk3,only safestrap. Sounds like you toasted your recovery. Youll need to find some guides to flash back the stock recovery with odin, maybe another method. Lots of guides here for this sort of thing.
Sent from my SGH-I337M
Click to expand...
Click to collapse
Thanks for the reply I think you might be right. At one time I used safestrap and got to Twrp but I couldnt get it to work/ do anything. Ill see what i can find. Thanks

clemmie said:
Download goomanager from the app store. There's an option there that allows you to reboot into recovery from the app. That's the only way that works for me, maybe you should try that.
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
Ok I tried that but it goes to the same downloading screen when I use goomanager option to reboot to recovery.

soonerchad said:
Ok I tried that but it goes to the same downloading screen when I use goomanager option to reboot to recovery.
Click to expand...
Click to collapse
You need to make a backup of what you have on your phone now.
I just seen you were on the i337 the us variant. What firmware are you on?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app[/QUOTE]
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
You need to make a backup of what you have on your phone now.
I just seen you were on the i337 the us variant. What firmware are you on?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I337 using xda app-developers app[/QUOTE]
Android Version? 4.2.2
Baseband Version? I337UCUAMF3
Build Version? jdq39.i337ucuamf3
If thats not what you wanted let me know.
Im downloading the Stock Recovery now, going to try to figure out how to do it with Odin, hope I dont screw up, lol

soonerchad said:
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Android Version? 4.2.2
Baseband Version? I337UCUAMF3
Build Version? jdq39.i337ucuamf3
If thats not what you wanted let me know.
Im downloading the Stock Recovery now, going to try to figure out how to do it with Odin, hope I dont screw up, lol[/QUOTE]
Yes download the mf3 tar files. Use this guide http://forum.xda-developers.com/showthread.php?t=1372414 and you should be back to stock than you should be able to go back into recovery. If that doesn't work than you have incomplete flashes somewhere. Look for the mj6-mj9 update and find the post on how to fix it. You'll have to download some emergency files. But I think you can just Odin with the mf3 tar files.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
Android Version? 4.2.2
Baseband Version? I337UCUAMF3
Build Version? jdq39.i337ucuamf3
If thats not what you wanted let me know.
Im downloading the Stock Recovery now, going to try to figure out how to do it with Odin, hope I dont screw up, lol
Click to expand...
Click to collapse
Yes download the mf3 tar files. Use this guide http://forum.xda-developers.com/showthread.php?t=1372414 and you should be back to stock than you should be able to go back into recovery. If that doesn't work than you have incomplete flashes somewhere. Look for the mj6-mj9 update and find the post on how to fix it. You'll have to download some emergency files. But I think you can just Odin with the mf3 tar files.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app[/QUOTE]
Ok Im back. I downloaded the stock files and used odin and now im back to complete stock. Stock recovery screen is there also. Now to go do some researching on how to do it right!
THANKS GUYS!

soonerchad said:
Yes download the mf3 tar files. Use this guide http://forum.xda-developers.com/showthread.php?t=1372414 and you should be back to stock than you should be able to go back into recovery. If that doesn't work than you have incomplete flashes somewhere. Look for the mj6-mj9 update and find the post on how to fix it. You'll have to download some emergency files. But I think you can just Odin with the mf3 tar files.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Ok Im back. I downloaded the stock files and used odin and now im back to complete stock. Stock recovery screen is there also. Now to go do some researching on how to do it right!
THANKS GUYS![/QUOTE]
Got safestrap installed. (trying to post 10 posts so I can put up links so if anyone else sees this maybe it will help.)

soonerchad said:
Ok Im back. I downloaded the stock files and used odin and now im back to complete stock. Stock recovery screen is there also. Now to go do some researching on how to do it right!
THANKS GUYS!
Click to expand...
Click to collapse
Got safestrap installed. (trying to post 10 posts so I can put up links so if anyone else sees this maybe it will help.)[/QUOTE]
Doing backup now. (one more post and ill post links)

soonerchad said:
Ok Im back. I downloaded the stock files and used odin and now im back to complete stock. Stock recovery screen is there also. Now to go do some researching on how to do it right!
THANKS GUYS!
Click to expand...
Click to collapse
Got safestrap installed. (trying to post 10 posts so I can put up links so if anyone else sees this maybe it will help.)[/QUOTE]
I know your new and a lot of people would say read before you post because all the info is on here already so no need to post any links there's already threads on how to fix it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
Got safestrap installed. (trying to post 10 posts so I can put up links so if anyone else sees this maybe it will help.)
Click to expand...
Click to collapse
I know your new and a lot of people would say read before you post because all the info is on here already so no need to post any links there's already threads on how to fix it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app[/QUOTE]
Alright, I understand. Thanks again!!

soonerchad said:
I know your new and a lot of people would say read before you post because all the info is on here already so no need to post any links there's already threads on how to fix it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Alright, I understand. Thanks again!![/QUOTE]
Just remember there's only certain Roms you can flash with safestrap. Do not try to install twrp or cwm. Test out the Roms and find the ones you like goodluck
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
Alright, I understand. Thanks again!!
Click to expand...
Click to collapse
Just remember there's only certain Roms you can flash with safestrap. Do not try to install twrp or cwm. Test out the Roms and find the ones you like goodluck
Sent from my SAMSUNG-SGH-I337 using xda app-developers app[/QUOTE]
Well apparently cyanogenmod 11doesnt work with it or I did something wrong cause it didnt work for me.

http://forum.xda-developers.com/showthread.php?t=2428254
These are the only Roms you can use with safestrap. You can only use touchwiz based Roms and only 4.2.2. There is the Google edition ROM you can use. But cyangenmod will not work or any kanga Roms they can only be touchwiz based. And that link shows you what ROM you can use.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
http://forum.xda-developers.com/showthread.php?t=2428254
These are the only Roms you can use with safestrap. You can only use touchwiz based Roms and only 4.2.2. There is the Google edition ROM you can use. But cyangenmod will not work or any kanga Roms they can only be touchwiz based. And that link shows you what ROM you can use.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Ahhh I see now, will try that one out.

Related

[Q] Need help, rooted S4, wifi not working anymore

So I rooted my sprint s4, following these instructions:
http://qbking77.com/development/how-to-root-the-sprint-and-international-exynos-samsung-galaxy-s4/
Which worked great. Then, I followed these instructions for the hotspot modification:
http://qbking77.com/development/how-to-get-free-native-wifi-hotspot-on-the-sprint-samsung-galaxy-s4/
I was running the MF9 firmware, so I used that. I made a backup of the two files before copying the new ones over. I reset it, and it stopped on the sprint screen, so I followed the unrooting instructions here:
http://qbking77.com/development/how-to-unroot-and-unbrick-the-samsung-galaxy-s4/
Now, my wifi isn't turning on. It flashes for a second, then disappears, showing a "The device has detected an application attempting unpermitted actions and has stopped loading. To protect your device, it is recommended you reboot." alert.
The backups I made weren't there, so I assume it rebuilds those files. What do I do? I've tried factory resetting, but nothing has helped so far. I've read a few forum postings but they seem to all revolve around issues with new roms. I only used the stock one, so I'm not sure exactly what to do.
So, can anyone help me out? I'm not too far into these things, so easier instructions are better.
That alert is because you have Knox installed and rooted. You need a root browser and go into the system/app folder and delete the two files that begin with the name Knox.
Sent from my SPH-L720 using Tapatalk 4
daniel4653 said:
That alert is because you have Knox installed and rooted. You need a root browser and go into the system/app folder and delete the two files that begin with the name Knox.
Sent from my SPH-L720 using Tapatalk 4
Click to expand...
Click to collapse
I just did that, and the message is gone, but it still won't let me turn on wifi.
miron721 said:
I just did that, and the message is gone, but it still won't let me turn on wifi.
Click to expand...
Click to collapse
Flash diff kernel, this issue has been solved many times
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Flash diff kernel, this issue has been solved many times
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
So to do that, I'd use the odin program? And where do I get the different kernel?
To be honest you shouldn't be flashing if you don't fully read and learn before getting a rooted phone. Kernels are in the original development thread.
And you flash the kernel zips in a custom recovery.
Sent from my SPH-L720 using Tapatalk 4
daniel4653 said:
To be honest you shouldn't be flashing if you don't fully read and learn before getting a rooted phone. Kernels are in the original development thread.
And you flash the kernel zips in a custom recovery.
Sent from my SPH-L720 using Tapatalk 4
Click to expand...
Click to collapse
I had no intention of flashing a new rom, only wanting to root it to remove some useless stock software, and move some other stuff to the SD card.
I'm guessing I want the first file here, right? http://forum.xda-developers.com/showthread.php?t=2258107
I'm running MF9, so I want that to match up, right?
Yes that's the right file for u if u are on the software version mf9 like u mentioned. Good luck!
Sent from my SPH-L720 using xda app-developers app
Chevyblood561 said:
Yes that's the right file for u if u are on the software version mf9 like u mentioned. Good luck!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
So I put the new kernel on, and no change. Wifi still won't turn on.
What now? I've seen a bunch of people with this problem on the GSM one, but no real answers. No resolved ones on the CDMA version
miron721 said:
So I put the new kernel on, and no change. Wifi still won't turn on.
What now? I've seen a bunch of people with this problem on the GSM one, but no real answers. No resolved ones on the CDMA version
Click to expand...
Click to collapse
Try kt kernel
Sent from my SPH-L720 using xda app-developers app
gotablunt said:
Try kt kernel
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I can't find any instructions on how to install that kernel, since it's a zip instead of a tar so I can't use odin. Everyone just says "use recovery," which doesn't help me at all, since I don't know what that is or how to do it. I've tried a few other kernels I've found on xda, but none have fixed it.
Flash custom recovery tar thru odin, theres a couple threads in development section with different recoveries...then simple flash kt kernel zip thru your new recovery ( you can access your new recovery by booting up the phone and holding down the volume down button)...I suggest you learn how to back up and restore your rom b4 trying this
Odin this recovery http://d-h.st/O8s its agats
Here you can download kt touchwiz kernel http://forum.xda-developers.com/showthread.php?t=2288309 make sure to thank him..good luck
Sent from my SPH-L720 using xda app-developers app
Installed the recovery, as well as the kt touchwiz kernel, and no change. Still no wifi.
miron721 said:
Installed the recovery, as well as the kt touchwiz kernel, and no change. Still no wifi.
Click to expand...
Click to collapse
Tell us what does it say in your settings about phone
Sent from my SPH-L720 using xda app-developers app
Software version: L720VPUAMDC
Hardware version: L720.08
Android 4.2.2
Baseband version: L720VPUAMDC
Kernel version:
3.4.6.2--KT-SGS4-JB4.2-TW-SPR-09.17.2013---ga0a3e11
[email protected] #1
Tue Sep 17 19:06:25 MST 2013
Build Number: JDQ39.L720VPUAMDP
SELinux status: permissive
miron721 said:
Software version: L720VPUAMDC
Hardware version: L720.08
Android 4.2.2
Baseband version: L720VPUAMDC
Kernel version:
3.4.6.2--KT-SGS4-JB4.2-TW-SPR-09.17.2013---ga0a3e11
[email protected] #1
Tue Sep 17 19:06:25 MST 2013
Build Number: JDQ39.L720VPUAMDP
SELinux status: permissive
Click to expand...
Click to collapse
Hmm weird, well here update to the newer update to this for here. Will be a pain in the ass but believe me this will solve all your problems.
http://forum.xda-developers.com/showthread.php?t=2375523
Flash that in Odin and make sure you just get the huge file that's the only one you need. Extract what is inside and you will get a .tar.md5 file. Next do a factory reset of your phone. Boot into download mode. Flash that file. If you get any errors just delete the .md5 extension and reboot your computer and try again. Once done, it should boot will take awhile no more than 10 mins. If it doesn't boot take off battery and boot into recovery. You should stock recovery with the little green dead android. Its OK don't freak out just do a factory reset and reboot. Once that is done.
Download either odex or deoxeded tar file which ever you want here
http://forum.xda-developers.com/showthread.php?t=2357471
Once that is done you can flash that through Odin and you should be rooted and updated to the latest version.
You can also download twrp recovery here
http://techerrata.com/browse/twrp2/jfltespr
All versions there. You can download stabled twrp 2.5.0.2 or download the newer one 2.6 0.3 as people have said it has been working for them and there you go. Its a lot but it gets the job done and all your problems go away.
ROMANTiC KiD said:
Hmm weird, well here update to the newer update to this for here. Will be a pain in the ass but believe me this will solve all your problems.
http://forum.xda-developers.com/showthread.php?t=2375523
Flash that in Odin and make sure you just get the huge file that's the only one you need. Extract what is inside and you will get a .tar.md5 file. Next do a factory reset of your phone. Boot into download mode. Flash that file. If you get any errors just delete the .md5 extension and reboot your computer and try again. Once done, it should boot will take awhile no more than 10 mins. If it doesn't boot take off battery and boot into recovery. You should stock recovery with the little green dead android. Its OK don't freak out just do a factory reset and reboot. Once that is done.
Download either odex or deoxeded tar file which ever you want here
http://forum.xda-developers.com/showthread.php?t=2357471
Once that is done you can flash that through Odin and you should be rooted and updated to the latest version.
You can also download twrp recovery here
http://techerrata.com/browse/twrp2/jfltespr
All versions there. You can download stabled twrp 2.5.0.2 or download the newer one 2.6 0.3 as people have said it has been working for them and there you go. Its a lot but it gets the job done and all your problems go away.
Click to expand...
Click to collapse
I followed all the steps, and wifi still won't turn on. Frustrating.
miron721 said:
I followed all the steps, and wifi still won't turn on. Frustrating.
Click to expand...
Click to collapse
Then it is probably the phone. Take it to sprint for them to check it out? Make sure your back to stock tho
Sent from my SPH-L720 using xda app-developers app
miron721 said:
I followed all the steps, and wifi still won't turn on. Frustrating.
Click to expand...
Click to collapse
Just to clarify, do you by any chance mean wifi hotspot?
Sent from my SPH-L720 using xda app-developers app
gotablunt said:
Just to clarify, do you by any chance mean wifi hotspot?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
No, I mean wifi at all. Also, I just noticed when I insert a microsd, it says it's safe to remove immediately. Loading from the SD card on recovery works though.
And I doubt sprint will help me, I've had the phone for a while and they wouldn't do anything for issues with my last phone, since it was the 15th day I had it. If I send it to samsung with the stock recovery, kernel and rom, will they be able to tell?

Galaxy S4 Recovery mode not working

So, first, I'm running the stock 4.2.2 rooted on the ATT SGH-I337.
I installed ROM manager shortly after the root, and recently downloaded CM 10.1.3 for the att model of my phone. However, I couldn't find it in the recovery system to flash it. So, I install goomanager and flash over to TWRP, thinking maybe TWRP's easier interface will help me to find it. I reboot into recovery, and if I attempt to enter recovery mode, it gets stuck on the "Downlaoding, do not turn off target" screen. So, I re-flash CWM back on it, and reboot to recovery, and get stuck on that same screen again. If I just boot it, it's fine, jumps right back into 4.2.2 TouchWiz rooted. However, as you probably know, I can't install a ROM without recovery mode, and stock TouchWiz is poo.
I'd like to get CM running asap, although I'm just glad my phone still RUNS for now (my experience installing CM on my S3 was a NIGHTMARE).
So yea, any reason I would be getting stuck on that screen and unable to enter recovery? Like I said, I'd like to have CM as soon as I can.
Also, if someone can link me to a guide to install through CWM w\o needing a computer, that'd be wonderful. Thanks!
I'm assuming you're running on the MF3 build version. Read up before you brick your device. Your only option for a custom recovery is safestrap. Come on people.
Cheers.
Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium
Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ryno9100 said:
Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
What firmware version do you have. Look at the last three characters of your build number
jd1639 said:
What firmware version do you have. Look at the last three characters of your build number
Click to expand...
Click to collapse
It's MF3
ryno9100 said:
It's MF3
Click to expand...
Click to collapse
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.
jball said:
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
And also, I did, in fact, read past rooting, and found several people running CWM and TWRP fine, so I figured it would work. Now maybe they didn't have MF3,and I wasn't paying extremely close attention, but I'm pretty sure there were some on the same model and firmware as I am.
jd1639 said:
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.
Click to expand...
Click to collapse
So, at this point, it's a waiting game for someone to find out how to put a recovery mode on an MF3 firmware, is what you're telling me?
Also, I may have been in stock. I don't remember EXACTLY what clockwork looked like. I just know it wouldn't let me select the gapps and CM files,which is why I tried TWRP. Though I did have CWM recovery flashed when I booted it into recovery those several times.
Dude you never booted CWM. That was MF3s stock recovery. MF3 does not allow any custom recovery but Safestrap.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Trying to install TWRP recovery...help please.

So I rooted the s4 with kingo root and everything went great. I then installed goo manager and installed twrp recovery...or so I thought. I then tried to reboot into recovery to flash the pac rom but my ohone rebooted into download mode stating that it couldnt boot into normal mode. Now ive officially rebooted into normal mode but how do I boot into recovery mode and not have that error again? I know this has prolly been asked before but im on my phone and its hard to navigate through thousands ofnpost to find the right answer.
Thanks in advance!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I recommend reading
"General Section" and then search "Safestrap"
Sent from my Nexus 5 using Tapatalk
jball said:
I recommend reading
"General Section" and then search "Safestrap"
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
+1 and make sure you know what firmware you're on
what happened is you upgraded your bootloader to one that is "locked" and you can't go back. now you have to use safestrap recovery instead of TWRP. i did the same thing it sucks because now we can't use custom kernels.
khakiman said:
what happened is you upgraded your bootloader to one that is "locked" and you can't go back. now you have to use safestrap recovery instead of TWRP. i did the same thing it sucks because now we can't use custom kernels.
Click to expand...
Click to collapse
Can we not install custom roms? It keeps rebooting or taking me to download mode.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
jrodbrown58 said:
Can we not install custom roms? It keeps rebooting or taking me to download mode.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Not if you're on mf3 firmware or newer. Do you know what firmware you're on?
im going to help you out because i went through this the other night:
first you need to do this to get out of download mode.
get odin3 for your pc and connect your phone while in download mode. if you haven't already get the http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows and install them.
next download this
http://www.androidfilehost.com/?fid=23321874045862958
this is 4 files you will put into odin to get you back to stock everything. this is 4.3 not 4.4.2 because i assume you want to have a rooted phone with a custom recovery and there is no way to root 4.4.2 yet or put a custom recovery on.
so when you unrar the file add the 4 files to ODIN and flash
NEXT: you should be in stock mode now. enable developer mode by going into settings about device and clicking build 7 times. enable usb debugging in developer mode.
now you can root. download http://forum.xda-developers.com/attachment.php?attachmentid=2559636&d=1391563147 , extract to a folder. connect your phone to your pc with usb and run install.bat. go through the process. now you are rooted.
next you can install safestrap recovery mode (looks just like TWRP just you cant install custom kernels.... and only some custom roms, sucks i know)
http://goo.im/devs/Hashcode/jflteatt/safestrap/Safestrap-JFLTEATT-3.71.apk just run that and install recovery from the app.
so now you have your 4.3 phone with stock rom rooted and a custom recovery. IF YOU DARE try and flash a rom. go here for more info on that. scroll down to the part that says ROMS OVERVIEW
forum.xda-developers.com/showthread.php?t=2616221
i tried and ended up stuck in download mode again so i gave up and am chilling in stock 4.3 with root and custom recovery at least for now until i have some free time to try another rom.
THE END. hope i help some people with this
jd1639 said:
Not if you're on mf3 firmware or newer. Do you know what firmware you're on?
Click to expand...
Click to collapse
Mf3. Fml I got this phone bc I thought I can put pacrom on it
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I may just trade my phone back to get the note 2
Sent from my SAMSUNG-SGH-I337 using Tapatalk
jrodbrown58 said:
Mf3. Fml I got this phone bc I thought I can put pacrom on it
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Sorry no Pacman, only tw based roms.
---------- Post added at 09:06 PM ---------- Previous post was at 09:00 PM ----------
kahkiman, Would have been easier to link him to the all in one tar
jd1639 said:
Sorry no Pacman, only tw based roms.
---------- Post added at 09:06 PM ---------- Previous post was at 09:00 PM ----------
kahkiman, Would have been easier to link him to the all in one tar
Click to expand...
Click to collapse
i wasnt sure how the all in one tar works.... you just put it on pda?
khakiman said:
i wasnt sure how the all in one tar works.... you just put it on pda?
Click to expand...
Click to collapse
Yep

[Q] Bricked i337 -- URGENT

Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Suprr said:
Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Click to expand...
Click to collapse
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
jmjoyas said:
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
Click to expand...
Click to collapse
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Suprr said:
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Click to expand...
Click to collapse
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Jmjoyas told me to flash the full tar version and No I do not.
Suprr said:
Jmjoyas told me to flash the full tar version and No I do not.
Click to expand...
Click to collapse
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
To be frank, I have not a clue of what any of those are.
Suprr said:
To be frank, I have not a clue of what any of those are.
Click to expand...
Click to collapse
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am flashing it right now. Let's hope it works.
EDIT:
Flashed the full tar version for mk2 to no avail via Odin
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
I flashed from this thread and this line:
http://forum.xda-developers.com/showthread.php?t=2700726
To return to factory stock MK2 flash the I337_MK2_Full_Odin tar
Click to expand...
Click to collapse
Suprr said:
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
Click to expand...
Click to collapse
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I love you. thank you so much.
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Suprr said:
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Click to expand...
Click to collapse
You're on mk2 firmware now. You'll need to root it using safe root and then put safestrap on in order to flash that rom. Look in the general forum for index, all thing mk2 and nb1. There's a lot of info there so read it carefully
Sent from my Nexus 5 using XDA Free mobile app

[Q] can't flash recovery

OK. I'm trying to install cyanogen mod on my at&t gs4. I am new to root, obviously. I've been watching wwjoshdew do a 30 minute install video that seems to go really in depth but my problem lies with the custom recovery I installed, PhilZ. I installed extracted it and tried doing a manual recovery. I got the message software found on your system has not been authorized by at&t or something similar to that. I took out my battery and booted up into download mode and hit start device normally or whatever it says exactly. Then I tried using a flasher from the play store and same thing. I would like a fix to this (without Odin if possible). I am afraid to continue without help to avoid bricking my phone.
Thank you.
Hopefully I don't sound too stupid
Do you know what firmware version you're on? Most likely it's a newer version which does not support a custom recovery other than safestrap. And m most likely you will need Odin
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
Do you know what firmware version you're on? Most likely it's a newer version which does not support a custom recovery other than safestrap. And m most likely you will need Odin
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I'm on 4.4.2
Mojo-jojo25 said:
I'm on 4.4.2
Click to expand...
Click to collapse
I thought so. And you've learned, you can not flash a custom recovery on your phone. You'll need to flash this in Odin to get your phone running again
http://forum.xda-developers.com/showthread.php?p=50912149
Then look in the general forum for all things att..... (edit http://forum.xda-developers.com/showthread.php?p=53758227) read that. Safestrap is the only recovery you can use on that firmware version
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app

Categories

Resources