Hi there,
I just got MK809 III and it worked excellent for 3 days, and then it just doesn't boot and there is no output on HDMI.
I googled and there are forums which mentions to connect it via the micro usb (next to the sd card), and then press reset and connect to PC via USB. However my pc doesn't recognise any new devices..
I can see the "red' colour led light up when i plug micro usb in USB via PC (windows 7)
Any idea on how to connect it via Windows 7?
Or its just dead? As i didn't install any custom rom or didn't even try to root it.. IT was a stock ROM
Any advise would be helpful
Thanks
routeme said:
Hi there,
I just got MK809 III and it worked excellent for 3 days, and then it just doesn't boot and there is no output on HDMI.
I googled and there are forums which mentions to connect it via the micro usb (next to the sd card), and then press reset and connect to PC via USB. However my pc doesn't recognise any new devices..
I can see the "red' colour led light up when i plug micro usb in USB via PC (windows 7)
Any idea on how to connect it via Windows 7?
Or its just dead? As i didn't install any custom rom or didn't even try to root it.. IT was a stock ROM
Any advise would be helpful
Thanks
Click to expand...
Click to collapse
Same here after 2 days....was on a custom rom...press reset and connect to PC from OTG ( next to sd card) and wait for PC to recognise...mine took about 1 min....usually take few sec. I did a restore with "RKBatchTool" and is OK now.
Related
hi guys
i am new to this so apprecaite your help.have been using my xda exec for about a firthinte brilliantly.however since yesterday ,when i plug the usb cable to pda nothing is happening,fone is not being recognized by pc.i tried different cables and diferent pc's to no avail.the pda does not even charge via usb cable.
however it charges normally via wall charger.
do you think I bust the connector,could it be fixed?
hi heres what you can do to see it your usb still works
1. have a storage card sd/mmc if you dont have one borrow one
2. download softtick 2 from http://www.megaupload.com/?d=YPH5DW4I or wm5storage you choose
3. connect your pda with softick installed
4.press the usb option and the sd card should display as a normal flash drive
5.if the computer recognizes it and picks it up as a flash drive then you definatly know it works properly
6. if it doesn't then you can hard reset your pda
7:if that still dont work then consult a techniian or a guru to help you open it
hope this helps!
hi guys
i installed a new rom today and when i mount the usb nothing shows up on the PC screen but from phone i shows that usb it is connected
I am running streakdroid 1.91 and USB only works to charge the Streak.
Nothing else happens --- I get no USB Mass storage icon and my computer does nothing when I attach either the USB cable or the home dock via USB.
Fastboot USB detect also does NOT work -- it just hangs.......
Other than charge the computer, USB does nothing!
Any ideas? Please?
gawarner said:
I am running streakdroid 1.91 and USB only works to charge the Streak.
Nothing else happens --- I get no USB Mass storage icon and my computer does nothing when I attach either the USB cable or the home dock via USB.
Fastboot USB detect also does NOT work -- it just hangs.......
Other than charge the computer, USB does nothing!
Any ideas? Please?
Click to expand...
Click to collapse
Have you checked to make sure you don't have an unrecognized device in your device manager? Most of the time the problem is simply drivers, could possibly be the cable, and hopefully it's not a hardware problem
usbdisk - enables auto mounting of usb drives using host mode - also mounts ntfs drives but breaks usb to pc mounting of streaks sd card.
last time i got that issue was when i flash a new rom with the above option.hope this helps.relook into your install.txt while flashing.
I had a similar problem and I was using one of the Dell ROM's. I was never able to fix it and spent about a frustrating hour on the phone with Dell Support (them telling me that there was a problem with three different computers and suggesting that I didn't understand how to plug in a USB cable). They eventually replaced the hardware.
I just recieved a USB adapter that I bought from eBay ( http://www.ebay.ca/itm/200864679193?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 )
I have tried connecting a few USBs but none of them are working. It just says USB Connector connected. When i connected a logitech controller it gave me an error message that it was a high powered device. Not sure if there is something wrong with the adapter or if I need to instal additional drivers/apps to help with the mounting, or maybe change a few settings.
Can anyone verify if they can mount USBs on JB?
Sent from my GT-N8010 using xda app-developers app
Nvm, I got it to work. Found a clue on a different seller's ebay page.
All you need to do is connect the cable to your device and restart it. Once it restarts, take off the cable and connect the desired USB device and connect the cable back.
Also, make sure your USB is formatted as FAT32.
This is what I found on the web:
" By default the Android device supports the FAT32 format only. If your flash drive is in NTFS
format, it will be seen as a blank drive.
For the first time to use the OTG cable, please connect the cable with your phone and restart the
phone. (Before you use USB devices to connect your phone, please firstly connect the USB
devices with the cable, then connect your phone.)
When you need to change USB devices, please unplug the OTG cable from mobile phone firstly,
then change USB devices, and plug in your phone."
Hello! I wanted to transfer a 3gb img file with adb push from my pc to my phone because i do not have an sd card. After a few moments , i heard a disconnection sound from my pc , and it said that the usb malfunctioned and i should try connect it again. In adb it said "protocol failure". After connecting it again , it wouldn't get recognized anymore. What should i do? I dont have any os installed right now and no sd card. Is my usb cable or port broken?
CozmoGM said:
Hello! I wanted to transfer a 3gb img file with adb push from my pc to my phone because i do not have an sd card. After a few moments , i heard a disconnection sound from my pc , and it said that the usb malfunctioned and i should try connect it again. In adb it said "protocol failure". After connecting it again , it wouldn't get recognized anymore. What should i do? I dont have any os installed right now and no sd card. Is my usb cable or port broken?
Click to expand...
Click to collapse
nvm fixed