usb not working on Streak 5 - help - Streak 5 General

I am running streakdroid 1.91 and USB only works to charge the Streak.
Nothing else happens --- I get no USB Mass storage icon and my computer does nothing when I attach either the USB cable or the home dock via USB.
Fastboot USB detect also does NOT work -- it just hangs.......
Other than charge the computer, USB does nothing!
Any ideas? Please?

gawarner said:
I am running streakdroid 1.91 and USB only works to charge the Streak.
Nothing else happens --- I get no USB Mass storage icon and my computer does nothing when I attach either the USB cable or the home dock via USB.
Fastboot USB detect also does NOT work -- it just hangs.......
Other than charge the computer, USB does nothing!
Any ideas? Please?
Click to expand...
Click to collapse
Have you checked to make sure you don't have an unrecognized device in your device manager? Most of the time the problem is simply drivers, could possibly be the cable, and hopefully it's not a hardware problem

usbdisk - enables auto mounting of usb drives using host mode - also mounts ntfs drives but breaks usb to pc mounting of streaks sd card.
last time i got that issue was when i flash a new rom with the above option.hope this helps.relook into your install.txt while flashing.

I had a similar problem and I was using one of the Dell ROM's. I was never able to fix it and spent about a frustrating hour on the phone with Dell Support (them telling me that there was a problem with three different computers and suggesting that I didn't understand how to plug in a USB cable). They eventually replaced the hardware.

Related

usb connector problem

hi guys
i am new to this so apprecaite your help.have been using my xda exec for about a firthinte brilliantly.however since yesterday ,when i plug the usb cable to pda nothing is happening,fone is not being recognized by pc.i tried different cables and diferent pc's to no avail.the pda does not even charge via usb cable.
however it charges normally via wall charger.
do you think I bust the connector,could it be fixed?
hi heres what you can do to see it your usb still works
1. have a storage card sd/mmc if you dont have one borrow one
2. download softtick 2 from http://www.megaupload.com/?d=YPH5DW4I or wm5storage you choose
3. connect your pda with softick installed
4.press the usb option and the sd card should display as a normal flash drive
5.if the computer recognizes it and picks it up as a flash drive then you definatly know it works properly
6. if it doesn't then you can hard reset your pda
7:if that still dont work then consult a techniian or a guru to help you open it
hope this helps!

usb mass storage

hi, mates
i faced with a problem on my hero,
it doesn't connect to PC.
after cable's plugged in, sometimes I see mode selection dialog, sometimes - no, but in any case, PC writes : usb device is not recognized.
sometimes i see removable drive win explorer, but after clicking on this windows tells me - please insert disk into this drive,
and hero detaches mounted drive with notification about preparing sd card for usage.
i faced with with problem not after next flashing custom rom, but after that i tried to wipe data and flash various roms, the same result.
how do you think this is hardware issue? or recommend me to try another steps to fix this, please
Sent from my aHero using the XDA mobile application powered by Tapatalk
use usbdeview to remove anything HTC then reboit,don't let windows install anything from Windows update
Thank you,
I've tried this solution,
but it doesn't work completely.
Actually, I've tried to connect my Hero via usb with XP, Vista, Ubuntu, OSX
and got the same problem,
host loses the connection to hero,
sometimes host can't connect after plugging cable ,
sometimes host can transfer small files, but when I try to copy large file to the device and host loses connection during the copy process.
looks like a problem with usb connector/controller on device side,
like power trouble, low voltage on usb
your opinion?

[Q] Trouble connecting samsung epic to pc

I have my Samsung epic installed to my computer.
-SAMSUNG Android Composite ADB Interface: installed with Samsung drivers.
-SAMSUNG Android USB Composite Device: Installed with Samsung drivers.
-Android UMS DISK USB Device: installed with two Microsoft drivers.
No matter if usb debugging is on or off, when i click to mount/transfer sdcard files nothing happens. When usb debugging is off it says autoplay, but no folder opens after that. Should their be a google or android driver signed with the ums disk usb device.
Im running 32 bit windows xp. Please help me, i cannot transfer any files, and ive been wanting to learn how to root but i cant do anything If i cant even mount my sd card properly
I have Xp too and idk when but i used to have 0 problems using USB Mass Storage Mode and all of a sudden, idk , what i did but it doesn't work anymore. I know it's my PC /setup because I take my phone over to my friends Vista PC and it goes into USB Mass Storage Mode just fine. Everything is already installed on their PC cause they have an Epic as well. A tmp solution that has become a permanent one for me is to download the Dropbox app and create an account and well there you go. Mass storage mode in the "cloud" for ya.
Ignorance1 said:
I have my Samsung epic installed to my computer.
-SAMSUNG Android Composite ADB Interface: installed with Samsung drivers.
-SAMSUNG Android USB Composite Device: Installed with Samsung drivers.
-Android UMS DISK USB Device: installed with two Microsoft drivers.
No matter if usb debugging is on or off, when i click to mount/transfer sdcard files nothing happens. When usb debugging is off it says autoplay, but no folder opens after that. Should their be a google or android driver signed with the ums disk usb device.
Im running 32 bit windows xp. Please help me, i cannot transfer any files, and ive been wanting to learn how to root but i cant do anything If i cant even mount my sd card properly
Click to expand...
Click to collapse
I had the same problem with my desktop. Only connects with USB ports from back of computer. Try some other ports maybe.
I had the same problem for about 2 months, best solution is to buy a different cord, I use the Evo's and it works fine
Assuming you aren't using the ghetto cheap cable that came with the epic, i would use another port. I had the same problem with one of my pc's.
i just got my epic fri and am experiencing this problem. i also went and bought a new usb cable and nothing i seem to do works.
it also interferes with my usb wireless adapter. when i plug it in my internet just comes to a halt and then comes right back to life as soon as i unplug it...
Ignorance1 said:
I have my Samsung epic installed to my computer.
-SAMSUNG Android Composite ADB Interface: installed with Samsung drivers.
-SAMSUNG Android USB Composite Device: Installed with Samsung drivers.
-Android UMS DISK USB Device: installed with two Microsoft drivers.
No matter if usb debugging is on or off, when i click to mount/transfer sdcard files nothing happens. When usb debugging is off it says autoplay, but no folder opens after that. Should their be a google or android driver signed with the ums disk usb device.
Im running 32 bit windows xp. Please help me, i cannot transfer any files, and ive been wanting to learn how to root but i cant do anything If i cant even mount my sd card properly
Click to expand...
Click to collapse
what kind of usb u have Cuz the samsung USB Brakes Real easy U should Try HTC USB Or Just Buy another like I did
When using the stock samsung cable, i have to plug it into a usb port in the back of my computer, when using the htc evo usb cord I can plug it into any port but still am faced with the dilemma. Is there a special driver associated with android ums disk drive besides the ones microsoft provides?

[Q] acer a500 usb host problem

hi, i recently bought this tablet. the usb (full size port) used to mount usb drives, sd cards in cameras etc and the files could be seen on the device. of late, it seems the port does not mount any device, but provides power to it(thumb drive light flashes, phone charges). the file manager( file manager hd) shows "directory empty" when i connect a usb drive and choose it. please provide me with a solution. i tried rooting and un rooting the device but the problem presists. i tried enabling and disabling usb debugging but got no results. please help.
Try grabbing USB Mount All from the market. That should fix your issues.
Chlballi
Try using "USB Mount All v.1.3" available on the Marketplace. However your device will lneed to be rooted to use it.
may i know as to what is a usb mount? the iconia a500 already has a full size usb port.
got it, trying it out now.
thanks a lot. working like a charm
sorry double post.
seems I have the same problem.
My acer wont recognise any of my drives but it will power them.
I've tried usb mount all but it doesn't help.
I'm running the virtuous 1.4rom
Any help appreciated.

USB doesnt mount

I just recieved a USB adapter that I bought from eBay ( http://www.ebay.ca/itm/200864679193?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 )
I have tried connecting a few USBs but none of them are working. It just says USB Connector connected. When i connected a logitech controller it gave me an error message that it was a high powered device. Not sure if there is something wrong with the adapter or if I need to instal additional drivers/apps to help with the mounting, or maybe change a few settings.
Can anyone verify if they can mount USBs on JB?
Sent from my GT-N8010 using xda app-developers app
Nvm, I got it to work. Found a clue on a different seller's ebay page.
All you need to do is connect the cable to your device and restart it. Once it restarts, take off the cable and connect the desired USB device and connect the cable back.
Also, make sure your USB is formatted as FAT32.
This is what I found on the web:
" By default the Android device supports the FAT32 format only. If your flash drive is in NTFS
format, it will be seen as a blank drive.
For the first time to use the OTG cable, please connect the cable with your phone and restart the
phone. (Before you use USB devices to connect your phone, please firstly connect the USB
devices with the cable, then connect your phone.)
When you need to change USB devices, please unplug the OTG cable from mobile phone firstly,
then change USB devices, and plug in your phone."

Categories

Resources