hi guys
i am new to this so apprecaite your help.have been using my xda exec for about a firthinte brilliantly.however since yesterday ,when i plug the usb cable to pda nothing is happening,fone is not being recognized by pc.i tried different cables and diferent pc's to no avail.the pda does not even charge via usb cable.
however it charges normally via wall charger.
do you think I bust the connector,could it be fixed?
hi heres what you can do to see it your usb still works
1. have a storage card sd/mmc if you dont have one borrow one
2. download softtick 2 from http://www.megaupload.com/?d=YPH5DW4I or wm5storage you choose
3. connect your pda with softick installed
4.press the usb option and the sd card should display as a normal flash drive
5.if the computer recognizes it and picks it up as a flash drive then you definatly know it works properly
6. if it doesn't then you can hard reset your pda
7:if that still dont work then consult a techniian or a guru to help you open it
hope this helps!
Related
Since from the first use of device I'm not be able to access contents of sd card from pc. I have installed the latest version of htc sync available in htc' s site.
When I check the option disk drive from USB to Pc, I can see the new removable disk in file explorer, but I cannot access to this disk.
I always get the error: insert a disk to the drive M (translated to english cause my pc have greek locale).
Have anyone else this issue?
Have you tried to read the SD with an external reader?
I'm also had this problem.
I did simply repair the HTC Sync.
Restart the pc.
And then connected worked.
Some how the problem solved. I tried a lot connect disconnect, close and open htc sync, and suddently I get access to my sd card. I didn't do something different from the other tries, but this time works. First time after a lot of tries and reboots the last couple of days.
Connecting as Disk Drive is not accepted easily. I think it is always required to activate USB debugging mode first. So, simple way is first choose HTC sync mode on the phone, after it get connected change to Disk Drive mode. It works..
Thanks for the tips.
Sometimes don't work though. Needed to connect/disconnect several times to work properly. Sometimes when I connect the cable, the popup window doesn't appear(I have checked the asking option) and sync doesn't work too. And after some tries when connect the cable the popup appears and work both sync or disk option.
faulty cable perhaps?
I'm still using the charger and USB cable from my i-Mate K-Jam - works like a charm!
hi, mates
i faced with a problem on my hero,
it doesn't connect to PC.
after cable's plugged in, sometimes I see mode selection dialog, sometimes - no, but in any case, PC writes : usb device is not recognized.
sometimes i see removable drive win explorer, but after clicking on this windows tells me - please insert disk into this drive,
and hero detaches mounted drive with notification about preparing sd card for usage.
i faced with with problem not after next flashing custom rom, but after that i tried to wipe data and flash various roms, the same result.
how do you think this is hardware issue? or recommend me to try another steps to fix this, please
Sent from my aHero using the XDA mobile application powered by Tapatalk
use usbdeview to remove anything HTC then reboit,don't let windows install anything from Windows update
Thank you,
I've tried this solution,
but it doesn't work completely.
Actually, I've tried to connect my Hero via usb with XP, Vista, Ubuntu, OSX
and got the same problem,
host loses the connection to hero,
sometimes host can't connect after plugging cable ,
sometimes host can transfer small files, but when I try to copy large file to the device and host loses connection during the copy process.
looks like a problem with usb connector/controller on device side,
like power trouble, low voltage on usb
your opinion?
I am running streakdroid 1.91 and USB only works to charge the Streak.
Nothing else happens --- I get no USB Mass storage icon and my computer does nothing when I attach either the USB cable or the home dock via USB.
Fastboot USB detect also does NOT work -- it just hangs.......
Other than charge the computer, USB does nothing!
Any ideas? Please?
gawarner said:
I am running streakdroid 1.91 and USB only works to charge the Streak.
Nothing else happens --- I get no USB Mass storage icon and my computer does nothing when I attach either the USB cable or the home dock via USB.
Fastboot USB detect also does NOT work -- it just hangs.......
Other than charge the computer, USB does nothing!
Any ideas? Please?
Click to expand...
Click to collapse
Have you checked to make sure you don't have an unrecognized device in your device manager? Most of the time the problem is simply drivers, could possibly be the cable, and hopefully it's not a hardware problem
usbdisk - enables auto mounting of usb drives using host mode - also mounts ntfs drives but breaks usb to pc mounting of streaks sd card.
last time i got that issue was when i flash a new rom with the above option.hope this helps.relook into your install.txt while flashing.
I had a similar problem and I was using one of the Dell ROM's. I was never able to fix it and spent about a frustrating hour on the phone with Dell Support (them telling me that there was a problem with three different computers and suggesting that I didn't understand how to plug in a USB cable). They eventually replaced the hardware.
I just recieved a USB adapter that I bought from eBay ( http://www.ebay.ca/itm/200864679193?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 )
I have tried connecting a few USBs but none of them are working. It just says USB Connector connected. When i connected a logitech controller it gave me an error message that it was a high powered device. Not sure if there is something wrong with the adapter or if I need to instal additional drivers/apps to help with the mounting, or maybe change a few settings.
Can anyone verify if they can mount USBs on JB?
Sent from my GT-N8010 using xda app-developers app
Nvm, I got it to work. Found a clue on a different seller's ebay page.
All you need to do is connect the cable to your device and restart it. Once it restarts, take off the cable and connect the desired USB device and connect the cable back.
Also, make sure your USB is formatted as FAT32.
This is what I found on the web:
" By default the Android device supports the FAT32 format only. If your flash drive is in NTFS
format, it will be seen as a blank drive.
For the first time to use the OTG cable, please connect the cable with your phone and restart the
phone. (Before you use USB devices to connect your phone, please firstly connect the USB
devices with the cable, then connect your phone.)
When you need to change USB devices, please unplug the OTG cable from mobile phone firstly,
then change USB devices, and plug in your phone."
Hi there,
I just got MK809 III and it worked excellent for 3 days, and then it just doesn't boot and there is no output on HDMI.
I googled and there are forums which mentions to connect it via the micro usb (next to the sd card), and then press reset and connect to PC via USB. However my pc doesn't recognise any new devices..
I can see the "red' colour led light up when i plug micro usb in USB via PC (windows 7)
Any idea on how to connect it via Windows 7?
Or its just dead? As i didn't install any custom rom or didn't even try to root it.. IT was a stock ROM
Any advise would be helpful
Thanks
routeme said:
Hi there,
I just got MK809 III and it worked excellent for 3 days, and then it just doesn't boot and there is no output on HDMI.
I googled and there are forums which mentions to connect it via the micro usb (next to the sd card), and then press reset and connect to PC via USB. However my pc doesn't recognise any new devices..
I can see the "red' colour led light up when i plug micro usb in USB via PC (windows 7)
Any idea on how to connect it via Windows 7?
Or its just dead? As i didn't install any custom rom or didn't even try to root it.. IT was a stock ROM
Any advise would be helpful
Thanks
Click to expand...
Click to collapse
Same here after 2 days....was on a custom rom...press reset and connect to PC from OTG ( next to sd card) and wait for PC to recognise...mine took about 1 min....usually take few sec. I did a restore with "RKBatchTool" and is OK now.