Related
Hello,
I downloaded the latest firmware for P6800 "P6800XXLB4 3.2 P6800XEFLC1 France February 2012"
I made a flash with odin and now I have an error message
"Encountered year after firmware upgrade, please select kies in recovery mode and try again".
With odin I always "Failed" ...
how do I do now?
Best regard
Press and hold the Volume UP+Power button until a recovery mode screen appears, and do wipe data/factory reset
biopsin said:
Press and hold the Volume UP+Power button until a recovery mode screen appears, and do wipe data/factory reset
Click to expand...
Click to collapse
Thank you for your response!
But I can not, if I do this I get the firmware upgrade encountered an issue, please select recovery mode in kies and try again or volume down mode Odin that's all.
damien92220 said:
Thank you for your response!
But I can not, if I do this I get the firmware upgrade encountered an issue, please select recovery mode in kies and try again or volume down mode Odin that's all.
Click to expand...
Click to collapse
You shouldn't have to do a factory reset when flashing with odin. Odin wipes the whole drive and flashes from scratch-- it may not wipe the partition table or individual partitions, but it at least reformats each partition as if it were new. I'd recommend rolling back to your original firmware.
Sent from my GT-P6800 using XDA Premium HD app
Hello,
I can not put the original firmware with Odin that I tested 5 firmware.
<ID:0/019> Added!!
<ID:0/019> Removed!!
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800XXLC3_P6800DRELB1_P6800XXLA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.bin
<ID:0/019> NAND Write Start!!
<ID:0/019>
<ID:0/019> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
damien92220 said:
Hello,
I can not put the original firmware with Odin that I tested 5 firmware.
<ID:0/019> Added!!
<ID:0/019> Removed!!
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800XXLC3_P6800DRELB1_P6800XXLA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.bin
<ID:0/019> NAND Write Start!!
<ID:0/019>
<ID:0/019> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
ICS IS OUT!!! See if that helps!
Sent from my GT-P6800 using XDA Premium HD app
Same here...
Hello all,
I added a screen dump. First time I tried to flash with the update in the CSC option... I downloaded the file and the G6800 Odin package from Sammobile. Before to go to sleep quickly tried to upgrade but then I messed things up.
I tried various modes. Can someone help me?
Thanks!
Please try to read the instructions for Odin...
http://forum.xda-developers.com/showthread.php?t=1469635
I'll quote the relevant part for you because you missed it somehow:
xenix96 said:
PLEASE DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Click to expand...
Click to collapse
If it's already been written and it's not the right one you'll need to find a valid pit file for your model of Tab (P6800 or P6810) to fix it. You'll have to search for it though, I don't know where to find them.
solution
I have this problem yesterday, so I work out via google search.
After a while I discovered that I had used a wrong PIT file ... So the correct downloaded flashed and ready
See attachment for the right PIT
Thanks for the solution!
Co_OL 1977 said:
I have this problem yesterday, so I work out via google search.
After a while I discovered that I had used a wrong PIT file ... So the correct downloaded flashed and ready
See attachment for the right PIT
Click to expand...
Click to collapse
Could you please attach the required PIT file? It is not in your message! En bedankt voor de oplossing!!!
PIT File
Lol not uploaded
Settings
Co_OL 1977 said:
Lol not uploaded
Click to expand...
Click to collapse
Can you tell me exactly which settings were used in Odin? This was while flashing the new ICS software right?
(before I make another stupid choice...)
woevanda said:
Can you tell me exactly which settings were used in Odin? This was while flashing the new ICS software right?
(before I make another stupid choice...)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1469635
It explains everything here, evwn how to flash a pit file, and which boxes to check and such.
same problem..help needed asap..thanks
Succeeded!
Co_OL 1977 said:
Lol not uploaded
Click to expand...
Click to collapse
My 7.7 is now running on Android 4.04. Thanks!!!
Man I hit the same issue. Got stuck in the kies recovery screen while upgrading to ICS.
Can someone please provide clear instructions getting out of that? Thank you so much!
Note: download mode and flashing through odin does not get me further than factorfs. =_=
CRAP. Now my battery died. Won't even charge or turn on.
krazykat said:
Man I hit the same issue. Got stuck in the kies recovery screen while upgrading to ICS.
Can someone please provide clear instructions getting out of that? Thank you so much!
Note: download mode and flashing through odin does not get me further than factorfs. =_=
CRAP. Now my battery died. Won't even charge or turn on.
Click to expand...
Click to collapse
See my post about the pit file :cyclops:
And you must have your tablet at least for 10 min on your charger before you can turn on or you can see he is charging
Quote from repair factory:
If your battery is completely discharged, the ten minutes before you see that your device is loaded.
Click to expand...
Click to collapse
Co_OL 1977 said:
See my post about the pit file :cyclops:
And you must have your tablet at least for 10 min on your charger before you can turn on or you can see he is charging
Quote from repair factory:
Click to expand...
Click to collapse
Yup I did thanks. Though - after flashing pit with re-partition, flashing ICS won't seem to go anywhere.
What firmware did u flash it with after pit?
krazykat said:
Yup I did thanks. Though - after flashing pit with re-partition, flashing ICS won't seem to go anywhere.
What firmware did u flash it with after pit?
Click to expand...
Click to collapse
i'm having the same problem with my tab 7.7, can someone guide us through this. I already followed the instructions from the guide of flashing rom but none of this work. TIA.
Thank you...
Co_OL 1977 said:
Lol not uploaded
Click to expand...
Click to collapse
I also experienced the error when doing the update to ICS recently and spent long hours trying to figure out and checking forums.
I tried the PIT file attached by "CL 1977" and it worked like a charm. :good:
Now running ICS 4.0.4. :fingers-crossed:
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Anybody? I need my phone back :S
chemell said:
Anybody? I need my phone back :S
Click to expand...
Click to collapse
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
spamtrash said:
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
Click to expand...
Click to collapse
But can I use another rom? I don't care if isn't a 4.2.2 rom because I need the phone again doesn't matter with which rom or android version.
If u can boot to recovery flash a custom rom then flash stock via odin
aayushkhajuria2842 said:
If u can boot to recovery flash a custom rom then flash stock via odin
Click to expand...
Click to collapse
I can't, I only got download mode...
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
aayushkhajuria2842 said:
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
Click to expand...
Click to collapse
Well it doesn't work, when I turn on the phone a black screen with a cellphone, a warning sign and a monitor appears and a text says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
With this screen I can only go into download mode but when I try recovery mode it just puts the screen black and back to the same text and pictures.
Another thing that worries me it's that I can't turn the phone off with the button, only if I pull the battery out.
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
aayushkhajuria2842 said:
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
Click to expand...
Click to collapse
I've already tried with the rom "I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5" (I believe it's stock rom) and get the odin error that appears in my first post...
Try some other firmware of you own region ......... 4.3 or 4.4 whichever u have for your region .......I think then u will nt get same error
chemell said:
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Click to expand...
Click to collapse
Hi, try to flash through kies emergency firmware recovery.
navdeepavi said:
Hi, try to flash through kies emergency firmware recovery.
Click to expand...
Click to collapse
Hi, I tried, but in Kies I can't get trough the "Connecting..." status so when I choose "Emergency firmware recovery" the list of devices appears empty.
I think u should try flashing some other stock firmware I hav had the prblm before
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
It should work I did the same thing but cant say anything
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
chemell said:
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
Click to expand...
Click to collapse
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
DELETED, procedure was for I9505 ONLY
you have to follow the procedure form this link instead.
Good luck.
spamtrash said:
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
You will need the PC with not faulty CPU, first.
Then, you have to use the PIT from here
Of course, you will need the Qualcomm drivers as well, from here or this one
Then, you have to follow the relatively simple procedure described here
That shall fix the corrupted bootloader, and I hope that you will not see the described there errors which would point to the hardware problem.
Good luck.
Click to expand...
Click to collapse
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Just an observation, you said you have no recovery right? So have you tried just flashing the tar of PhilZ recovery using Odin to get it back?
At least then you'll have a recovery again and can move forward with a custom ROM install
Sent from my GT-I9505 using XDA Premium HD app
lolo9393 said:
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Click to expand...
Click to collapse
right. the correct one provided.
Hi, How can i downgrade from APDC firmware to APB7? Within Odin there's no way to do that beacuse it doesn't allow to replace or install firmware older than the one you have on your phone (unlocking OEM from developer menu doesn't work).
Now the only thing i was able to do is to install TWRP recovery and root the phone but i need to find a way to get back the best working APB7
thanks , bye
jantellaz said:
Hi, How can i downgrade from APDC firmware to APB7? Within Odin there's no way to do that beacuse it doesn't allow to replace or install firmware older than the one you have on your phone (unlocking OEM from developer menu doesn't work).
Now the only thing i was able to do is to install TWRP recovery and root the phone but i need to find a way to get back the best working APB7
thanks , bye
Click to expand...
Click to collapse
Here : http://www.theandroidsoul.com/download-a3-2016-stock-firmware-88226/
there is latest MM and older LP firmwares..
jantellaz said:
Hi, How can i downgrade from APDC firmware to APB7? Within Odin there's no way to do that beacuse it doesn't allow to replace or install firmware older than the one you have on your phone (unlocking OEM from developer menu doesn't work).
Now the only thing i was able to do is to install TWRP recovery and root the phone but i need to find a way to get back the best working APB7
thanks , bye
Click to expand...
Click to collapse
Download firmware linked by @XDADEVX .
I think you may need one of these, too.
Then open odin go to pit button and select the pit file and in AP select the firmware. You also need to check "Repartition" box in odin.
Now click start and wait .
Downgrading firmware is very dangerous, bla, bla, bla.
Before choosing read this
Samsung usually prevent downgrading via odin for a reason.
If the firmware has had a revision update then down grading can make bad things happen.
ashyx said:
Samsung usually prevent downgrading via odin for a reason.
If the firmware has had a revision update then down grading can make bad things happen.
Click to expand...
Click to collapse
So? Which would be the way for downgrading this phone from MM to LP? I'm still on stock LP. But I'd like to try MM only if I'm sure I'll be able to go back. Usually, in most phones I've tried, is flashing the older ROM and then do a data wipe from recovery. I haven't tried with this A3 yet.
---------- Post added at 10:28 PM ---------- Previous post was at 10:26 PM ----------
jantellaz said:
Hi, How can i downgrade from APDC firmware to APB7? Within Odin there's no way to do that beacuse it doesn't allow to replace or install firmware older than the one you have on your phone (unlocking OEM from developer menu doesn't work).
Now the only thing i was able to do is to install TWRP recovery and root the phone but i need to find a way to get back the best working APB7
thanks , bye
Click to expand...
Click to collapse
You've created a user just to ask this but didn't bother to come back and tell what happened or how did you fix it, if you did.
Please don't be selfish. Don't just ask. Help others too, leave an update.
downgrade
Hello Everyone,!
Someone help me please!
I have a telekom hungary samsung galaxy a3 2016sm-a310 phone, and i want to downgrade from android 7.0 nougat to android marshmallow 6.0.1
I downloaded the correct firmware file, but odin has stopped updating firmware.
Odyn log is here:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> A310FXXU2BQB6_A310FTMH2BQB6_A310FXXU2BQA6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)What i'm dong wrong?
Thanks, Zolee
---------- Post added at 02:59 PM ---------- Previous post was at 02:49 PM ----------
Hi everyone! I have same problem! Odin has stops the update process, the sboot.bin file complete writing failed, nothing doesn't happened.
I tried rooting my phone using Odin from this tutorial:
https:// theunlockr(dot)com/2016/02/04/root-samsung-galaxy-s6-edge-plus/
It failed and now my phone reads "Kernel is not seandroid enforcing" and will not enter recovery mode.
I tried installing the proper firmware but when I try using that it fails and my phone then reads "SW REV CHECK FAIL DEVICE 3 BINARY 2"
This is what Odin says:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I don't know what to do, and any help would be greatly appreciated!
Also, the firmware I used is G928TUVU2COI5_G928TTMB2COI5_TMB and my model is SM-G928T
Can you still get into download mode? I'm thinking you rooted with the wrong version. Are you on 5.1.1 or 6.0.1?
http://forum.xda-developers.com/s6-...-root-s6-edge-plus-marshmallow-6-0-1-t3325477
kdogguk said:
Can you still get into download mode? I'm thinking you rooted with the wrong version. Are you on 5.1.1 or 6.0.1?
http://forum.xda-developers.com/s6-...-root-s6-edge-plus-marshmallow-6-0-1-t3325477
Click to expand...
Click to collapse
I'm on the most updated software, that's entirely possible. I can get on download mode, I will try to use the link you gave me and give you an update, thank you very much
kdogguk said:
Can you still get into download mode? I'm thinking you rooted with the wrong version. Are you on 5.1.1 or 6.0.1?
http://forum.xda-developers.com/s6-...-root-s6-edge-plus-marshmallow-6-0-1-t3325477
Click to expand...
Click to collapse
Okay so I tried it but since my phone doesn't turn on I cant put in the files from that link, I tried using oden and it failed again. On Odin it says Pass but my phone continues to say Kernel is Not seandroid enforcing, I've been at this for so long and I can't find a fix :'(
Where did you get your stock firmware from to flash with odin?
Is it a 3 file flash or a single large file which you place in the AP slot?
I find the 3 file ones are better as it contains the firmware, bootloader and correct files all for the same version/model.
Try sammobile, the download is slow if you don't have premium access to the download site.
You can also try the program kies or whatever the recovery program is these days, I remember with my note having exhausted all possibilities using it and it actually worked. It's slow but might bring your phone back to life.
Looks like the recovery program lies is now called smart switch...
http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176
kdogguk said:
Where did you get your stock firmware from to flash with odin?
Is it a 3 file flash or a single large file which you place in the AP slot?
I find the 3 file ones are better as it contains the firmware, bootloader and correct files all for the same version/model.
Try sammobile, the download is slow if you don't have premium access to the download site.
You can also try the program kies or whatever the recovery program is these days, I remember with my note having exhausted all possibilities using it and it actually worked. It's slow but might bring your phone back to life.
Looks like the recovery program lies is now called smart switch...
http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176
Click to expand...
Click to collapse
It's a three file flash I believe, I've just been putting one huge file in the AP, I haven't heard of the three file thing, I've tried the Sammobile firmware stock too and it hasn't worked. It fails on Odin. Do you know anything else I could try?
You could try grabbing TWRP recovery and flashing that with odin. That could give you access to a recovery to wipe and factory wipe. You could grab a custom rom and use TWRP to install that.
If you could find the 3 file flash it might help because it will have the right bootloader/firmware/csc for your phone.
Just a quick thought... Have you tried running odin with administration rights in Windows? And is it the latest version of odin?
---------- Post added at 09:42 AM ---------- Previous post was at 09:35 AM ----------
Found these links for you to have a look at...
http://forum.xda-developers.com/tmo...sources-tmobile-g928t-galaxy-s6-edge-t3204478
http://forum.xda-developers.com/tmo...rmware-g928t-complete-untouched-boh6-t3198387
kdogguk said:
You could try grabbing TWRP recovery and flashing that with odin. That could give you access to a recovery to wipe and factory wipe. You could grab a custom rom and use TWRP to install that.
If you could find the 3 file flash it might help because it will have the right bootloader/firmware/csc for your phone.
Just a quick thought... Have you tried running odin with administration rights in Windows? And is it the latest version of odin?
---------- Post added at 09:42 AM ---------- Previous post was at 09:35 AM ----------
Found these links for you to have a look at...
http://forum.xda-developers.com/tmo...sources-tmobile-g928t-galaxy-s6-edge-t3204478
http://forum.xda-developers.com/tmo...rmware-g928t-complete-untouched-boh6-t3198387
Click to expand...
Click to collapse
Sorry this is really late, apparently nothing worked, I took it to the uBreakiFix and they apparently had to install the firmware by it's build number which took like a week cause I had to go through every single build number. But thank you very much for your help
This Saturday my phone shut off, wouldn't come back on, got it into download mode to reset using ODIN like Youtube suggested, now it's stuck on a boot loop of trying to restart into recovery, but failing to do so and just restarting every time on the same boot loop trying to launch recovery, I tried Kies to reset it, but I no longer have the box it came in, and Verizon doesn't have the serial number on the sticker under the battery, and Kies was asking for the serial number. Any advice anyone who has experienced this issue can give me? It was on Android 6.0.1 at the time.
Flash the firmware in odin but check nand erase and repartition and make sure auto reboot is checked and f reset time is checked get the pit file and place it in the repartition slot then click start it will boot loop reboot to download mode and flash firmware again with only auto reboot checked and f reset time checked and nothing in repartition slot
it should boot now if not tell me I will try to help out
Sent from my Nexus 4 using Tapatalk
---------- Post added at 04:39 AM ---------- Previous post was at 04:33 AM ----------
Be warned Nand erase will wipe all data off the phone
Sent from my Nexus 4 using Tapatalk
How do I get the "pit file"?
http://www.sammobile.com/forum/showthread.php?t=30119
Sent from my Nexus 4 using Tapatalk
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 1831)
<OSM> All threads completed. (succeed 0 / failed 1)
Here is what ODIN said
Make sure you used the verizon pit file g900v
Sent from my Nexus 4 using Tapatalk
Just downloaded the PIT file, where do I select it on ODIN?
Put it in the pit tab
Sent from my Nexus 4 using Tapatalk
Still on the recovery loading boot loop, I had nand erase, & re-partition selected first time, and selected the pit, restarted it put it back in download this time just did the firmware.
Hmm here is something else try this download 7 zip file manager and open it extract the firmware file twice you will see at boot img file click the add button and make it a tar file
Then flash boot tar file in odin by itself
Sent from my Nexus 4 using Tapatalk
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Here is the ODIN log, it quits trying to boot into recovery but still keeps restarting lol, it goes to the first samsung galaxy s5 powered by android screen stays their for about 20 seconds and restarts
Try this again Boot to recovery mode and wipe data and cache
And also flash the modem fil using add and make it a tar file
Then flash the modem tar
Sent from my Nexus 4 using Tapatalk
---------- Post added at 06:04 AM ---------- Previous post was at 06:03 AM ----------
And try flashing firmware file again sorry I'm getting to the end of my ideas
Sent from my Nexus 4 using Tapatalk
Trying that now, and honestly thanks for the help wouldn't let me into recovery; I had something pop up with a yellow exclamation symbol on the screen, but I couldn't see what it said as I dropped phone and battery fell out
First check under battery what is your phone model just want to double check
http://firmware.gem-flash.com/index.php?a=browse&b=category&id=1122
Flash this firmware the combination firmware in odin
It should boot then flash a g900v firmware for 4.4.2 kitkat it will give you a scary warning ignore it and flash a boot tar file made from the combination firmware use same method as for previous firmwares of this thread to make odin flashable boot tar file and it should boot into 4.4.2 kitkat firmware from there flash any g900v official firmware using Odin
Sent from my Nexus 4 using Tapatalk
---------- Post added at 07:15 AM ---------- Previous post was at 07:15 AM ----------
This is my last resort if this doesn't work I have no idea how to fix your phone
Sent from my Nexus 4 using Tapatalk
---------- Post added at 07:25 AM ---------- Previous post was at 07:15 AM ----------
You can download 4.4.2 kitkat firmware from sammobile. Com I would recommend the first officially released firmware for g900v
Sent from my Nexus 4 using Tapatalk
SM-G900V; downloading the files now, I have slow internet so it will take a while, I can respond back to this post if this doesn't work, once more thanks for your help.
The combination file got me back up and running but it has a bunch of weird information on the screen, how do I get back to marshmallow though? and once again, thanks so much for your help:good::good:
@ldyal09
SM-G900V PG2 factory (low ship) firmware:
https://mega.nz/#!KoNmgJiC!tpFeIDGXNmc1diC6_NmqAeqClVHhTpPQ76WLPiCx6Z8
Flash via Odin (AP field only, no extra settings needed).
It will wipe all your data.
Don't suppose you might know what could have caused this issue? Tried flashing back to marshmallow 6.0.1 using ODIN and it's back in the recovery booting boot loop lol
@bbsc tried that file, keeps on giving me recovery loading boot loop
I re-flashed the combination one, and my phone is stuck in like a service mode, has like SEMI, Waterproof, MIC2 Echo, CPUStress, Factory IME icons on screen with logos of the android robot. Also has a black screen in the middle says
PDA:
Phone:
H/W:
RF Cal Date:
SMD:
UN:
Memory:
Rear CAM:
Front CAM:
TSP:
TSK:
Sensor Hub:
CH:
BATT_LEVEL