Hi, How can i downgrade from APDC firmware to APB7? Within Odin there's no way to do that beacuse it doesn't allow to replace or install firmware older than the one you have on your phone (unlocking OEM from developer menu doesn't work).
Now the only thing i was able to do is to install TWRP recovery and root the phone but i need to find a way to get back the best working APB7
thanks , bye
jantellaz said:
Hi, How can i downgrade from APDC firmware to APB7? Within Odin there's no way to do that beacuse it doesn't allow to replace or install firmware older than the one you have on your phone (unlocking OEM from developer menu doesn't work).
Now the only thing i was able to do is to install TWRP recovery and root the phone but i need to find a way to get back the best working APB7
thanks , bye
Click to expand...
Click to collapse
Here : http://www.theandroidsoul.com/download-a3-2016-stock-firmware-88226/
there is latest MM and older LP firmwares..
jantellaz said:
Hi, How can i downgrade from APDC firmware to APB7? Within Odin there's no way to do that beacuse it doesn't allow to replace or install firmware older than the one you have on your phone (unlocking OEM from developer menu doesn't work).
Now the only thing i was able to do is to install TWRP recovery and root the phone but i need to find a way to get back the best working APB7
thanks , bye
Click to expand...
Click to collapse
Download firmware linked by @XDADEVX .
I think you may need one of these, too.
Then open odin go to pit button and select the pit file and in AP select the firmware. You also need to check "Repartition" box in odin.
Now click start and wait .
Downgrading firmware is very dangerous, bla, bla, bla.
Before choosing read this
Samsung usually prevent downgrading via odin for a reason.
If the firmware has had a revision update then down grading can make bad things happen.
ashyx said:
Samsung usually prevent downgrading via odin for a reason.
If the firmware has had a revision update then down grading can make bad things happen.
Click to expand...
Click to collapse
So? Which would be the way for downgrading this phone from MM to LP? I'm still on stock LP. But I'd like to try MM only if I'm sure I'll be able to go back. Usually, in most phones I've tried, is flashing the older ROM and then do a data wipe from recovery. I haven't tried with this A3 yet.
---------- Post added at 10:28 PM ---------- Previous post was at 10:26 PM ----------
jantellaz said:
Hi, How can i downgrade from APDC firmware to APB7? Within Odin there's no way to do that beacuse it doesn't allow to replace or install firmware older than the one you have on your phone (unlocking OEM from developer menu doesn't work).
Now the only thing i was able to do is to install TWRP recovery and root the phone but i need to find a way to get back the best working APB7
thanks , bye
Click to expand...
Click to collapse
You've created a user just to ask this but didn't bother to come back and tell what happened or how did you fix it, if you did.
Please don't be selfish. Don't just ask. Help others too, leave an update.
downgrade
Hello Everyone,!
Someone help me please!
I have a telekom hungary samsung galaxy a3 2016sm-a310 phone, and i want to downgrade from android 7.0 nougat to android marshmallow 6.0.1
I downloaded the correct firmware file, but odin has stopped updating firmware.
Odyn log is here:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> A310FXXU2BQB6_A310FTMH2BQB6_A310FXXU2BQA6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)What i'm dong wrong?
Thanks, Zolee
---------- Post added at 02:59 PM ---------- Previous post was at 02:49 PM ----------
Hi everyone! I have same problem! Odin has stops the update process, the sboot.bin file complete writing failed, nothing doesn't happened.
Related
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Anybody? I need my phone back :S
chemell said:
Anybody? I need my phone back :S
Click to expand...
Click to collapse
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
spamtrash said:
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
Click to expand...
Click to collapse
But can I use another rom? I don't care if isn't a 4.2.2 rom because I need the phone again doesn't matter with which rom or android version.
If u can boot to recovery flash a custom rom then flash stock via odin
aayushkhajuria2842 said:
If u can boot to recovery flash a custom rom then flash stock via odin
Click to expand...
Click to collapse
I can't, I only got download mode...
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
aayushkhajuria2842 said:
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
Click to expand...
Click to collapse
Well it doesn't work, when I turn on the phone a black screen with a cellphone, a warning sign and a monitor appears and a text says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
With this screen I can only go into download mode but when I try recovery mode it just puts the screen black and back to the same text and pictures.
Another thing that worries me it's that I can't turn the phone off with the button, only if I pull the battery out.
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
aayushkhajuria2842 said:
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
Click to expand...
Click to collapse
I've already tried with the rom "I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5" (I believe it's stock rom) and get the odin error that appears in my first post...
Try some other firmware of you own region ......... 4.3 or 4.4 whichever u have for your region .......I think then u will nt get same error
chemell said:
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Click to expand...
Click to collapse
Hi, try to flash through kies emergency firmware recovery.
navdeepavi said:
Hi, try to flash through kies emergency firmware recovery.
Click to expand...
Click to collapse
Hi, I tried, but in Kies I can't get trough the "Connecting..." status so when I choose "Emergency firmware recovery" the list of devices appears empty.
I think u should try flashing some other stock firmware I hav had the prblm before
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
It should work I did the same thing but cant say anything
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
chemell said:
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
Click to expand...
Click to collapse
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
DELETED, procedure was for I9505 ONLY
you have to follow the procedure form this link instead.
Good luck.
spamtrash said:
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
You will need the PC with not faulty CPU, first.
Then, you have to use the PIT from here
Of course, you will need the Qualcomm drivers as well, from here or this one
Then, you have to follow the relatively simple procedure described here
That shall fix the corrupted bootloader, and I hope that you will not see the described there errors which would point to the hardware problem.
Good luck.
Click to expand...
Click to collapse
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Just an observation, you said you have no recovery right? So have you tried just flashing the tar of PhilZ recovery using Odin to get it back?
At least then you'll have a recovery again and can move forward with a custom ROM install
Sent from my GT-I9505 using XDA Premium HD app
lolo9393 said:
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Click to expand...
Click to collapse
right. the correct one provided.
hi,
i flashed cm13 from here:
http://forum.xda-developers.com/not...-cyanogenmod-13-semi-official-builds-t3259878
then i went back and tried to flash N910CXXU2COJ5_N910COXA2COJ5_XEO via Odin, which was my rom before flashing to cm13
now i am facing a bootloop at "samsung Powered By Android Screen"
i also tried N910CXXU1COI4_N910COXA1COI4_XEO, N910CXXU1COH4_N910COXA1COH4_XEO, i get Fail message from Odin
i redownloaded N910CXXU2COJ5_N910COXA2COJ5_XEO, thinking maybe the file was corrupted during my first download, but still same problem
please help, also please provide me a link to download bootloader and modem
thank you in advance
Update
i downloaded a bootloader and modem from this link:
http://forum.xda-developers.com/note...-team-t3031712 2nd post
but everytime i try to odin the bootloader using BL i get a FAIL messsage below:
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dont try to flash any bootloader below COJ5 as downgrading isn't possible.
Did you do a factory reset when you flashed COJ5 ?
Styrke said:
Dont try to flash any bootloader below COJ5 as downgrading isn't possible.
Did you do a factory reset when you flashed COJ5 ?
Click to expand...
Click to collapse
Thank you for your reply,
Yes, i did a factory rest after flashing COJ5
FYI, i also tried many roms which are based on COJ5 but no luck
The only rom i can flash now is CM13 from here
http://forum.xda-developers.com/not...-cyanogenmod-13-semi-official-builds-t3259878
Your thanks counter was 499, glad to make it 500
bobalyafeai09 said:
Thank you for your reply,
Yes, i did a factory rest after flashing COJ5
FYI, i also tried many roms which are based on COJ5 but no luck
The only rom i can flash now is CM13 from here
http://forum.xda-developers.com/not...-cyanogenmod-13-semi-official-builds-t3259878
Your thanks counter was 499, glad to make it 500
Click to expand...
Click to collapse
If you can boot cm while not stock I would suspect the kernel.
Make sure that the zipped custom rom you tried to flash by recovery has the stock kernel (boot.img) inside in some folder other than "system".And always wipe data/factory reset when coming from non stock.
If it still doesn't help then Im afraid I'll be out of solutions cause I haven't had any experience with locked bootloaders.
Styrke said:
If you can boot cm while not stock I would suspect the kernel.
Make sure that the zipped custom rom you tried to flash by recovery has the stock kernel (boot.img) inside in some folder other than "system".And always wipe data/factory reset when coming from non stock.
If it still doesn't help then Im afraid I'll be out of solutions cause I haven't had any experience with locked bootloaders.
Click to expand...
Click to collapse
It didn't help
Thank you for trying bto help
bobalyafeai09 said:
It didn't help
Thank you for trying bto help
Click to expand...
Click to collapse
Any luck? I'm facing the same problem.
ticiano_arraes said:
Any luck? I'm facing the same problem.
Click to expand...
Click to collapse
So far no luck, will post here if i find anything,
Please let me know if you fine a solution.
bobalyafeai09 said:
So far no luck, will post here if i find anything,
Please let me know if you fine a solution.
Click to expand...
Click to collapse
Hey, try flashing cm13 again and see if your serial number and IMEI are still showing.
Refer to this http://forum.xda-developers.com/showpost.php?p=64327408&postcount=213
Hi guys i rly need help and i will give my best to explain what happend. 1st off i am using my phone like 3 years now and he was perfect till now! ( 3 days i am trying to fix)
He was on stock rom never rooted never anything just samsung updates from phone. Before 3 days he was alredy od 6.0.1 and i got msg for update so i did it in install proces
phone just go black and never turn on!! So i panic what to do, phone dead bla bla bla , so i read evrything on net what i can do ( bcz i was like o some1 had this problem before me,
there is no reson to juke ppl and ask them for hlp) but still i cant find solution . 1 found if i press all bootns for like 60s he will turn on.
After my phone turn one he got some msg like he broke if i go on kies he will work again, so YES i download kies i tryed Kies i tryed all turorials i can find NOTHING!!! So i decide to go
on smartswitch , yea again i watch evry single video and tutorijal and still nothing !!!! Then i decide to go odin!!!! I REED 300 thread's on this forum, so far i will try to expian what i did!
1st i put some md5 from sammobile and he fail to flsh i got some msg mmc fail to write !
Then i find that i need to put pit file, so i ask on sammobile to hlp me with pit and some admin dude found pit for rom i am trying to use,
i put that pit and tryed to flash only pit its worikng fine if i put with md5 i got error with some NAND **** wont write, so i reed all about that
then i flash recovey for samsung note 4f for 6.0.1 on tutorial how to root , so after i try to flash with md5 i got this msg :
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Added!!
<ID:0/014> Odin engine v(ID:3.1100)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Set PIT file..
<ID:0/014> DO NOT TURN OFF TARGET!!
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> SingleDownload.
<ID:0/014> aboot.mbn
<ID:0/014> NAND Write Start!!
<ID:0/014> sbl1.mbn
<ID:0/014> rpm.mbn
<ID:0/014> tz.mbn
<ID:0/014> sdi.mbn
<ID:0/014> NON-HLOS.bin
<ID:0/014> boot.img
<ID:0/014> recovery.img
<ID:0/014> system.img.ext4
<ID:0/014> FAIL! (Write)
<ID:0/014>
<ID:0/014> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/014> Removed!!
So far i tryed to change pc, change usb drivers, change slots (usb) change cabel, change everything... nothing is working ... i lost my hope i was 2 days on sammobile forum,
and then one dude came and tell me if u need real help :" PLS GO ON XDAFORUM AND ASK FOR ONE DONT WASTE TIME HERE" so i decide to came here and ask for Help.
So guys if u have any idea how to fix this pls hlp!
Additional info : / i am using Windows 10 64bit / drivers from samsung site for note 4/ and i can flash any custome rom from recovery but when i try to use i have problems like random restarts, random turn off, random freez , and very lagy lagy application use, like i turn on camera and i need 15s to w8 so i can press record/ and lots of time i need to let phone cool down so i can try to flash bcz if he is hot he wont flash!
More info:
Info :
Product Code SM-N910FZKETPD
Original CSC code TPD
Active CSC code TPD
PDA version N910FXXS1CPF1
CSC version NO INFO ON THAT APP U GAVE ME JUST BLANK
Baseband version N910FXXS1COK1
Android version 5.1.1
Mobile operator telenor SRB /22001
Yoy should install a cystom recovery to begin with. You can do it with Odin, install for example TWRP, just look for it at xda. Then you can install anything you want, and even root it.
---------- Post added at 12:40 ---------- Previous post was at 12:39 ----------
Just boot to Twrp and flash egat ya need.
pr1jker said:
Yoy should install a cystom recovery to begin with. You can do it with Odin, install for example TWRP, just look for it at xda. Then you can install anything you want, and even root it.
---------- Post added at 12:40 ---------- Previous post was at 12:39 ----------
Just boot to Twrp and flash egat ya need.
Click to expand...
Click to collapse
meaning install custom rom with twrp ?
Yes. Read carefully how to install twrp. If you're not careful, the Note4 will boot to system recovery, not to twrp. You have a thread at xda about all this. Good lucj!
---------- Post added at 09:40 ---------- Previous post was at 09:40 ----------
luck
I have the same problem
odin fail
any help
I tried rooting my phone using Odin from this tutorial:
https:// theunlockr(dot)com/2016/02/04/root-samsung-galaxy-s6-edge-plus/
It failed and now my phone reads "Kernel is not seandroid enforcing" and will not enter recovery mode.
I tried installing the proper firmware but when I try using that it fails and my phone then reads "SW REV CHECK FAIL DEVICE 3 BINARY 2"
This is what Odin says:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I don't know what to do, and any help would be greatly appreciated!
Also, the firmware I used is G928TUVU2COI5_G928TTMB2COI5_TMB and my model is SM-G928T
Can you still get into download mode? I'm thinking you rooted with the wrong version. Are you on 5.1.1 or 6.0.1?
http://forum.xda-developers.com/s6-...-root-s6-edge-plus-marshmallow-6-0-1-t3325477
kdogguk said:
Can you still get into download mode? I'm thinking you rooted with the wrong version. Are you on 5.1.1 or 6.0.1?
http://forum.xda-developers.com/s6-...-root-s6-edge-plus-marshmallow-6-0-1-t3325477
Click to expand...
Click to collapse
I'm on the most updated software, that's entirely possible. I can get on download mode, I will try to use the link you gave me and give you an update, thank you very much
kdogguk said:
Can you still get into download mode? I'm thinking you rooted with the wrong version. Are you on 5.1.1 or 6.0.1?
http://forum.xda-developers.com/s6-...-root-s6-edge-plus-marshmallow-6-0-1-t3325477
Click to expand...
Click to collapse
Okay so I tried it but since my phone doesn't turn on I cant put in the files from that link, I tried using oden and it failed again. On Odin it says Pass but my phone continues to say Kernel is Not seandroid enforcing, I've been at this for so long and I can't find a fix :'(
Where did you get your stock firmware from to flash with odin?
Is it a 3 file flash or a single large file which you place in the AP slot?
I find the 3 file ones are better as it contains the firmware, bootloader and correct files all for the same version/model.
Try sammobile, the download is slow if you don't have premium access to the download site.
You can also try the program kies or whatever the recovery program is these days, I remember with my note having exhausted all possibilities using it and it actually worked. It's slow but might bring your phone back to life.
Looks like the recovery program lies is now called smart switch...
http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176
kdogguk said:
Where did you get your stock firmware from to flash with odin?
Is it a 3 file flash or a single large file which you place in the AP slot?
I find the 3 file ones are better as it contains the firmware, bootloader and correct files all for the same version/model.
Try sammobile, the download is slow if you don't have premium access to the download site.
You can also try the program kies or whatever the recovery program is these days, I remember with my note having exhausted all possibilities using it and it actually worked. It's slow but might bring your phone back to life.
Looks like the recovery program lies is now called smart switch...
http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176
Click to expand...
Click to collapse
It's a three file flash I believe, I've just been putting one huge file in the AP, I haven't heard of the three file thing, I've tried the Sammobile firmware stock too and it hasn't worked. It fails on Odin. Do you know anything else I could try?
You could try grabbing TWRP recovery and flashing that with odin. That could give you access to a recovery to wipe and factory wipe. You could grab a custom rom and use TWRP to install that.
If you could find the 3 file flash it might help because it will have the right bootloader/firmware/csc for your phone.
Just a quick thought... Have you tried running odin with administration rights in Windows? And is it the latest version of odin?
---------- Post added at 09:42 AM ---------- Previous post was at 09:35 AM ----------
Found these links for you to have a look at...
http://forum.xda-developers.com/tmo...sources-tmobile-g928t-galaxy-s6-edge-t3204478
http://forum.xda-developers.com/tmo...rmware-g928t-complete-untouched-boh6-t3198387
kdogguk said:
You could try grabbing TWRP recovery and flashing that with odin. That could give you access to a recovery to wipe and factory wipe. You could grab a custom rom and use TWRP to install that.
If you could find the 3 file flash it might help because it will have the right bootloader/firmware/csc for your phone.
Just a quick thought... Have you tried running odin with administration rights in Windows? And is it the latest version of odin?
---------- Post added at 09:42 AM ---------- Previous post was at 09:35 AM ----------
Found these links for you to have a look at...
http://forum.xda-developers.com/tmo...sources-tmobile-g928t-galaxy-s6-edge-t3204478
http://forum.xda-developers.com/tmo...rmware-g928t-complete-untouched-boh6-t3198387
Click to expand...
Click to collapse
Sorry this is really late, apparently nothing worked, I took it to the uBreakiFix and they apparently had to install the firmware by it's build number which took like a week cause I had to go through every single build number. But thank you very much for your help
Hello everyone,
I have a customer that managed to forget his account. He came to me to bypass the frp. He said he has the latest update of Nougat so I knew the only bypass I could posssibly use was probably the bluetooth headset one (if lucky). So I tried to revert the phone to an earlier Nougat version so I can use an easy bypass (hence I don't have any bluetooth headset). I've used Odin to flash one of the earliest Marshmallow versions for G935F (a vodafone, Uk one as the user said he bought the phone from there). Problem is Odin failed to flash the BL file and I've read somewhere on this forum a user said just uncheck that and I'll be fine. Well I've done that and the phone remained soft bricked (probably because the BL the phone still had was made for Nougat). Then I've downloaded a Nougat rom for the phone and the same problem (SW_RW verification for the BL file) so I bypassed the BL again and I've flashed the other files via Odin. All good, now the phone boots, installs the apps but it doesn't see the Sim anymore (I know that because the customer had a sim pin lock, wich the phone doesn't ask for anymore). Well, also the phone of course is still FRP locked but now I have two problems: It doesn't detect the Sim card anymore and it's still FRP locked. I am planning to flash the latest Oreo Rom as I am thinking that the bootloader will accept it and this way the phone will detect the sim again and at least I will be able to return it to my cutsomer in the same state as it was before.. but I am afraid I will not be able to bypass the FRP at all afterwards if I flash to the latest security patch. What should I do, is there any possiblity to fix both of my problems ? If yes can anyone here help me ?
EDIT:
First of all, the title is wrong - the phone ain't soft bricked anymore., it just doesn't detect the sim anymore and it's frp locked. And regarding to what I've wrote, I've also tried to flash like 3 Nougat versions for the G935F and same result everytime: BL check failed. Two of the roms were taken from threads from here, one of them had "untouched in its name" so I thought the bootloader will accept it but it didn't. Maybe the client thought he had Nougat on the phone when he had Oreo and maybe that's why the Bootloader won't accept to be flashed with any bootloader from Nougat roms. I must specify at least, I didn't try flashing the latest Nougat version yet. I can access download mode and recovery mode and I can turn on the phone but it won't let me pass the frp of course. I am waiting for some answers in here before trying to flash latest Nougat version and latest Oreo versionl.
Any help would be greatly apreciated, thank you very much!
Edit 2: Managed to flash the latest Nougat patch with succes (the Bootloader passed the verification, the Rom I flashed it's called: "G935FXXS2DRDI_Germany.zip".
Now the problem with the sim is solved, but I still have the FRP lock activated. If anyone knows how can I bypass it please help! Maybe I can dowgrade the phone somehow or anything else.
Edit 3: Planning to use a combination method shown in this video: youtube.com/watch?v=5v1oN4WFuqA
Edit 4: The combination ROM used in that tutorial won't get past the verification in Odin, wich results in a SW_RW flash fail. Trying a newer one from May, 2018 (COMBINATION_FA60_G935FXXU2ARA1).
Edit 5: This one failed as well..
=====================================================
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
===================================
EDIT 6: The second combination ROM actually worked! I forgot to switch to my other folder in odin so I thought it's not working. Now I am in the rom, on developer settings but I only see the usb debugging option. I can't see anything about OEM unlock. Could I directly flash the 6.0.1 Marshmallow now ? Hmm I will try exacly that!
Edit 7: Looks like the verification in Odin still fails if I try flashing the 6.0.1. I'm out of ideas.
EDIT 8: FInal Edit - I managed to unlock it by making an update and a downgrade from a specific x version to a specific y version. But.. I am afraid it is forbidden to give the exact details here so I guess that's it. SOLVED!
We don't allow discussion of FRP bypassing here because it could be used by thieves. The main purpose of FRP locks is to prevent that.
BrainwashedUser said:
Hello everyone,
I have a customer that managed to forget his account. He came to me to bypass the frp. He said he has the latest update of Nougat so I knew the only bypass I could posssibly use was probably the bluetooth headset one (if lucky). So I tried to revert the phone to an earlier Nougat version so I can use an easy bypass (hence I don't have any bluetooth headset). I've used Odin to flash one of the earliest Marshmallow versions for G935F (a vodafone, Uk one as the user said he bought the phone from there). Problem is Odin failed to flash the BL file and I've read somewhere on this forum a user said just uncheck that and I'll be fine. Well I've done that and the phone remained soft bricked (probably because the BL the phone still had was made for Nougat). Then I've downloaded a Nougat rom for the phone and the same problem (SW_RW verification for the BL file) so I bypassed the BL again and I've flashed the other files via Odin. All good, now the phone boots, installs the apps but it doesn't see the Sim anymore (I know that because the customer had a sim pin lock, wich the phone doesn't ask for anymore). Well, also the phone of course is still FRP locked but now I have two problems: It doesn't detect the Sim card anymore and it's still FRP locked. I am planning to flash the latest Oreo Rom as I am thinking that the bootloader will accept it and this way the phone will detect the sim again and at least I will be able to return it to my cutsomer in the same state as it was before.. but I am afraid I will not be able to bypass the FRP at all afterwards if I flash to the latest security patch. What should I do, is there any possiblity to fix both of my problems ? If yes can anyone here help me ?
EDIT:
First of all, the title is wrong - the phone ain't soft bricked anymore., it just doesn't detect the sim anymore and it's frp locked. And regarding to what I've wrote, I've also tried to flash like 3 Nougat versions for the G935F and same result everytime: BL check failed. Two of the roms were taken from threads from here, one of them had "untouched in its name" so I thought the bootloader will accept it but it didn't. Maybe the client thought he had Nougat on the phone when he had Oreo and maybe that's why the Bootloader won't accept to be flashed with any bootloader from Nougat roms. I must specify at least, I didn't try flashing the latest Nougat version yet. I can access download mode and recovery mode and I can turn on the phone but it won't let me pass the frp of course. I am waiting for some answers in here before trying to flash latest Nougat version and latest Oreo versionl.
Any help would be greatly apreciated, thank you very much!
Edit 2: Managed to flash the latest Nougat patch with succes (the Bootloader passed the verification, the Rom I flashed it's called: "G935FXXS2DRDI_Germany.zip".
Now the problem with the sim is solved, but I still have the FRP lock activated. If anyone knows how can I bypass it please help! Maybe I can dowgrade the phone somehow or anything else.
Edit 3: Planning to use a combination method shown in this video: youtube.com/watch?v=5v1oN4WFuqA
Edit 4: The combination ROM used in that tutorial won't get past the verification in Odin, wich results in a SW_RW flash fail. Trying a newer one from May, 2018 (COMBINATION_FA60_G935FXXU2ARA1).
Edit 5: This one failed as well..
=====================================================
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
===================================
EDIT 6: The second combination ROM actually worked! I forgot to switch to my other folder in odin so I thought it's not working. Now I am in the rom, on developer settings but I only see the usb debugging option. I can't see anything about OEM unlock. Could I directly flash the 6.0.1 Marshmallow now ? Hmm I will try exacly that!
Edit 7: Looks like the verification in Odin still fails if I try flashing the 6.0.1. I'm out of ideas.
Click to expand...
Click to collapse
Sent from my GT-I9300 using Tapatalk