[Q] How to stop the update? - Galaxy Note 3 Q&A, Help & Troubleshooting

My phone is presenting a popup every few minutes wanting me to install the software update. The only options are to delay it to a certain time or to install it right then. I can also just close the notice, but it will be back a few minutes later. I want to stop the intrusive notification of the update and I can not find a setting that will specifically do that. Can anyone help? Thanks!
I don't want the update because I have a Note 3 without call quality problems or any other issues at all. There are people complaining, (especially on the Verizon website), that the update has caused issues. One example: "now my phone wont hold a consistent signals with fluctuations from 1x to 3g to LTE.This happens in spots where i would be able to hold a LTE signal but now goes to 3g or 1x. This didnt happen until this update yesterday."
Because my Note 3 is perfect as is, I do not want the update for now. But, I also do not want a popup every few minutes that only gives me the choice of installing now or at a specific later time.

Will_T said:
My phone is presenting a popup every few minutes wanting me to install the software update. The only options are to delay it to a certain time or to install it right then. I can also just close the notice, but it will be back a few minutes later. I want to stop the intrusive notification of the update and I can not find a setting that will specifically do that. Can anyone help? Thanks!
I don't want the update because I have a Note 3 without call quality problems or any other issues at all. There are people complaining, (especially on the Verizon website), that the update has caused issues. One example: "now my phone wont hold a consistent signals with fluctuations from 1x to 3g to LTE.This happens in spots where i would be able to hold a LTE signal but now goes to 3g or 1x. This didnt happen until this update yesterday."
Because my Note 3 is perfect as is, I do not want the update for now. But, I also do not want a popup every few minutes that only gives me the choice of installing now or at a specific later time.
Click to expand...
Click to collapse
You can't if you're on stock unrooted. If you're rooted you can use Titanium Backup to freeze the 2 apps that check for the updates (Software-update v3_1308_2_1 and Software-update v6_1308_3_1).

OK, thanks. Frustrating since I have what I consider a perfect phone right now and would like to not take a chance on the update changing that.

Will_T said:
OK, thanks. Frustrating since I have what I consider a perfect phone right now and would like to not take a chance on the update changing that.
Click to expand...
Click to collapse
What firmware are you on right now? (dial *#1234#)

U rooted?
Sent from my SM-N900V using XDA Premium 4 mobile app

Not rooted
Baseband: N900VVRUBM19
Build: JSS15J.N900VVRUBM19

Will_T said:
Not rooted
Baseband: N900VVRUBM19
Build: JSS15J.N900VVRUBM19
Click to expand...
Click to collapse
Ow okay, that's the exynos version right? Then I can't be of help. I own the snapdragon SM-N9005 version and rooted with VEGA, but that's snapdragon only I believe...

You can disable one of the "firmware update" apps without root this might stop it
Preferences -> manage applications -> software update vX
Sent from my SM-N9005 using XDA Premium 4 mobile app

Luycks said:
Ow okay, that's the exynos version right? Then I can't be of help. I own the snapdragon SM-N9005 version and rooted with VEGA, but that's snapdragon only I believe...
Click to expand...
Click to collapse
Don't know about exynos or anything. It is what came with the phone on the pre-order shipment.

Killberty said:
You can disable one of the "firmware update" apps without root this might stop it
Preferences -> manage applications -> software update vX
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I looked at the "All" tab and I don't have that in the list. Only thing I see where the name of the app seems to be related to updating is the "SamsungHub Updater".

Will_T said:
I looked at the "All" tab and I don't have that in the list. Only thing I see where the name of the app seems to be related to updating is the "SamsungHub Updater".
Click to expand...
Click to collapse
Is weird, mine shows
Or u can root and use titanium backup
Sent from my SM-N9005 using XDA Premium 4 mobile app

Pull down notification bar and long press "Update Notification" --> Choose *App Info --> Now tap *Force Stop
Voila, notification should have gone (I did this yesterday to my phone (N9005) and it haven't come back, yet.
I believe (haven't tested as in fact I don't care) if you reboot phone after this, notification comes back. Or if you manually check for updates from settings. But so what if you can do that again to get it off
Reply to us did it work for you

Find the Software Update application in Application Manager, and Clear Data.
This removes the pending update. Be sure to disable updates afterwards.

Luycks said:
Ow okay, that's the exynos version right? Then I can't be of help. I own the snapdragon SM-N9005 version and rooted with VEGA, but that's snapdragon only I believe...
Click to expand...
Click to collapse
Trying to root my verizon note 3, when I look up specs @ phonearena it shows the verizon version's system chip as:
Qualcomm Snapdragon 800 MSM8974
I don't see anything about exynos

Suftware-update
Luycks said:
You can't if you're on stock unrooted. If you're rooted you can use Titanium Backup to freeze the 2 apps that check for the updates (Software-update v3_1308_2_1 and Software-update v6_1308_3_1).
Click to expand...
Click to collapse
I just ran TiBackup and have not found any such apps as Software update. Maybe you're thinking of a com.something line?
---------- Post added at 10:44 AM ---------- Previous post was at 09:56 AM ----------
On my rooted N900V it's called SDM and forcing stop didn't last but I froze it with Ti. We'll see...

This works. And no more updates have been sent

Related

Optus Usage Widget

The actual app from Optus works a treat, but the widget just says "There was an error displaying your usage". Anyone else having trouble with it?
Same problem here. Nfi how to fix.
No luck here either.
If it actually worked, took up less space on the screen (maybe 4 icon spots or less instead of 8!!!), and usage was updated more regularly (delayed up to 24hrs tsch...) then it would be perfect.
But alas, it fails. Still, I keep the app on my homescreen.
Not sure what issues you guys are having, im running Version 1.0(1) and it works fine!
do you know by any chance the link to download this app?
cheetah2k said:
Not sure what issues you guys are having, im running Version 1.0(1) and it works fine!
Click to expand...
Click to collapse
Have you tried the widget, not just the app? Cause it's the widget that doesnt work for us (should display the usage but errors).
Also I think theres only 1 version out atm.
yanuarsia said:
do you know by any chance the link to download this app?
Click to expand...
Click to collapse
Luckily I dumped it before firmware (CSC) update, because that removed all the optus apps.
http://www.megaupload.com/?d=O7ZROHSW
http://www.2shared.com/file/EUMsvDwv/My_Account_10.html
oswade said:
Have you tried the widget, not just the app? Cause it's the widget that doesnt work for us (should display the usage but errors).
Also I think theres only 1 version out atm.
Luckily I dumped it before firmware (CSC) update, because that removed all the optus apps.
http://www.megaupload.com/?d=O7ZROHSW
http://www.2shared.com/file/EUMsvDwv/My_Account_10.html
Click to expand...
Click to collapse
you're the man...
btw,which firmware did u dump?
EDIT: and the widget not working for me too
hihihehe said:
you're the man...
btw,which firmware did u dump?
EDIT: and the widget not working for me too
Click to expand...
Click to collapse
No worries.
Sorry I wasn't quite clear in my wording...
I meant I dumped the optus app before I upgraded firmware.
I flashed to JFB, then JFF, then JG1. I can't notice many improvements... In fact my phone is a bit more laggy at JG1 (but I have more apps installed so I presume it's that).
I would flash to JG3 but... I don't wanna have to restore all my settings and data again... (done it about 5 times).
I wouldn't mind having a copy of original AUS firmware for safety reasons... or at least the CSC (contains all the carrier specific info).
It's doing the same thing for me. Curses.
ahh common problem I see. wonder how this stuff is logged...
Sent from my Nexus One using XDA App
also, he he.. curses..
Sent from my Nexus One using XDA App
We should complain to optus... maybe?
BTW optus owner singtel, has various widgets for their customers which look way better...
Hey guys, quick 2 Optus-related questions. Switched from 3 to them when I bought my Galaxy S yesterday.
1) How can you find out your account number? I've registered a username and password for using the My Account app, but it wants an Account Number that it states will be on my bill, the first of which I obviously won't be receiving for a while...
2) Is there a backup of the stock Optus firmware (JF3) including all the pre-loaded apps just in case any of us ever need to return the phone under warranty to load it back to its factory settings and firmware?
Cheers!
1) It's annoying you don't get it when you first sign up, but it's written on your first bill (pro-rata which is only a few days).
Apparently you can also call up optus and get it off customer service, however I didn't know this so I just waited.
2) No there isn't a proper flashable dump, unfortunately. If you do decide to flash your firmware (it's worth it if you can't wait for official updates.. which are very slow).
AXIS of Reality said:
Hey guys, quick 2 Optus-related questions. Switched from 3 to them when I bought my Galaxy S yesterday.
1) How can you find out your account number? I've registered a username and password for using the My Account app, but it wants an Account Number that it states will be on my bill, the first of which I obviously won't be receiving for a while...
2) Is there a backup of the stock Optus firmware (JF3) including all the pre-loaded apps just in case any of us ever need to return the phone under warranty to load it back to its factory settings and firmware?
Cheers!
Click to expand...
Click to collapse
I noticed that Optus is chargning two mpnth's billing in the first bill. Same for you guys?
eaglesteve said:
I noticed that Optus is chargning two mpnth's billing in the first bill. Same for you guys?
Click to expand...
Click to collapse
Yep, same here.
Well, I flashed a newer firmware but now I don't have mobile internet since the APN settings need to be set. =(
Where can I find the settings to use, or is there some way to get it to find them automatically?
AXIS of Reality said:
Well, I flashed a newer firmware but now I don't have mobile internet since the APN settings need to be set. =(
Where can I find the settings to use, or is there some way to get it to find them automatically?
Click to expand...
Click to collapse
Aha, found them thanks to the awesomeness of Ausdroid!
http://ausdroid.net/apns/
^ use those to find the APNs for all aussie networks once you've flashed a new firmware. Make sure you have wifi turned off when you enter the info, and once the settings are in press menu -> save and within a few seconds the 3G icon in the notification bar appeared.

Sprint OTA update.

My tab did a OTA update this morning, 49mb SPH-P100.DJ30.
http://community.sprint.com/baw/thr...8DF.app4jive1?start=0&tstart=0&reqsorting=dec
Sent from my SPH-P100 using Tapatalk
upperkingjr said:
My tab did a OTA update this morning, 49mb SPH-P100.DJ30.
http://community.sprint.com/baw/thr...8DF.app4jive1?start=0&tstart=0&reqsorting=dec
Sent from my SPH-P100 using Tapatalk
Click to expand...
Click to collapse
Did it unroot your tab or any other bad thing? I have not seen this update on my sprint tab.
yes, if your update does succeed. It WILL unroot the Sprint Tab.
z4root WILL NOT WORK after the new update, it will just crash.
SUPERoneCLICK root software WILL work though! =]
Also make sure your LCD DPI Density Level is set to stock 240, and make sure if you replaced such files like WPA_SUPLICANT, to the one that supports AD_HOC to tether data from your cell phones to your TAB, You have to replace it Back with the STOCK WPA_SUPPLICANT in order for the Update to succeed.
Also another user had a problem with failed update due to him replacing the Gallary3d.apk with a non-stock one. So make sure you restore your stock gallary3d.apk if you ever replaced it.
Does the update fix the HID Bluetooth issue?
Sent from my SPH-P100 using Tapatalk
Ive always used my tab over WiFi and I just tried to update the profile, prl and firmware, but no luck.
Anybody have thoughts as to why it says Fail?
I am rooted with z4root btw
Sent from my SPH-P100 using XDA App
read my other comment in ur other post.
OTA updates work just fine on WIFI only. I use my tab as WiFi only.
The Update Firmware/Profile features do not work on settings app if u use wifi only, but your not missing our on anything trust me.
You will see the OTA update soon, leave your WiFi on, and eventually other the next couple days youll see it.
If you want it now, jus download the file and install it. Its much easier, no need to wait.
I shut the tab down and booted it up again, the update showed up.
The new widgets are great . Thanks for the prompt response
mmathai77 said:
read my other comment in ur other post.
OTA updates work just fine on WIFI only. I use my tab as WiFi only.
The Update Firmware/Profile features do not work on settings app if u use wifi only, but your not missing our on anything trust me.
You will see the OTA update soon, leave your WiFi on, and eventually other the next couple days youll see it.
If you want it now, jus download the file and install it. Its much easier, no need to wait.
Click to expand...
Click to collapse
Sent from my SPH-P100 using XDA App
anytime.
Noticed Changed (Myself):
- Darker Hues, The previous bright blues are now Darker dull blues
- Widgets (3 new ones)
- Ram Management App
- Task Manager
- Clearing ram seems to free up a little bit more now.
- Ram seems to be used a little less
- Boot Logos (HORRIBLE SPRINT LOGOS, YUCK, I want my samsung logo back)
- Breaks root, z4Root does not work - use SuperoneClick
- GPS locked into my location Noticably faster in the same spot INSIDE my house within 10 seconds, where it usually takes anywhere from 30-40seconds. Who knows. Maybe just a coincidence?
I like some of the changes.....subtle, but tasteful.
I uninstalled z4root since u mentioned it broke root, but superuser is still present nor can I uninstall it....
U mentioned superoneclick, where could I fund that and do you even recommend rooting again? I ask because I feel like us sprint tab owners are left behind and there aren't really many upsides to being rooted at this point.....no quality roms are anything. What are u rockin? Thanks again
mmathai77 said:
anytime.
Noticed Changed (Myself):
- Darker Hues, The previous bright blues are now Darker dull blues
- Widgets (3 new ones)
- Ram Management App
- Task Manager
- Clearing ram seems to free up a little bit more now.
- Ram seems to be used a little less
- Boot Logos (HORRIBLE SPRINT LOGOS, YUCK, I want my samsung logo back)
- Breaks root, z4Root does not work - use SuperoneClick
- GPS locked into my location Noticably faster in the same spot INSIDE my house within 10 seconds, where it usually takes anywhere from 30-40seconds. Who knows. Maybe just a coincidence?
Click to expand...
Click to collapse
Sent from my SPH-P100 using XDA App
There's a really annoying bug after this OTA update. The notification drawer pull down animation is now very choppy. Also, if there's anything animated going on when you pull down the drawer the frame rate will drop dramatically. This is a real step back; it used to be perfectly smooth.
Since I ran the update this a.m., I seem to be stuck in USB debugging limbo. It's grayed out and the green check mark is on but feint, so I can't seem to use the SuperOneClick app.
Any ideas?
I was previously rooted but that went away. Also, I forgot... how do I reset the darn thing? TIA
I had notification it was downloaded, but when i went to apply it, the upgrade failed. My Tab is very stock, though I do have Z4Root installed (though, like my Evo, Z4 never did work.)
Market issue?
Has anyone else noticed a difference in the market after the OTA update? Searches on known apps come up blank.
I have z4root and the update went though on mine just fine.
Sent from my Galaxy Tab using XDA App
it might not of installled, check your about my galaxy tab under the settings app. is it EA24?
The Update failed to complete, but it unrooted my Tab and Z4root fails to complete the operation when run.
Real nuisance I can yell you!
I see someone reckons SuperOneClick will work. I haven't got around to linking my Tab to a PC and it appears thats the only way to get the proggy to work??
cheers
Tony C
mmathai77 said:
it might not of installled, check your about my galaxy tab under the settings app. is it EA24?
Click to expand...
Click to collapse
HA!!! I just check and it looks like it didn't take!!! Well there you have it. Now Im curious if the update will show again. Hmmm.....
Also, manual install will not work....
It failed for me on the ota and manual,
It failed due to first, wpa_supplicant i switched from the stock to the one that suppoorts adhoc. So i put the stock one back. Then i tried it again and it said buildprop error.
I looked into that and it was cause i changed the lcd density of the stock from 240 to 180. So i changed it bak.
Then it worked.
Also if you changed any of the stock software it will fail as it verifys the correct files before update.
Sent from my SPH-P100 using XDA App
mmathai77 said:
it might not of installled, check your about my galaxy tab under the settings app. is it EA24?
Click to expand...
Click to collapse
So is ea24 the new version or the old one? I got the update don't know if it took. I am rooted with superclick and all root functions are still working.
bdejong11129 said:
So is ea24 the new version or the old one? I got the update don't know if it took. I am rooted with superclick and all root functions are still working.
Click to expand...
Click to collapse
Thats the new version
Sent from my EVO using XDA App

Galaxy Note ICS update 4.0.4

So , I just received an update an hour ago and successfully installed it. I was already on ICS before that, and I'd like to know what this update is about. Are there any fixes? do know where I can get a hold of their change log?
Thanks
dotslashbin said:
........... do know where I can get a hold of their change log?
Thanks
Click to expand...
Click to collapse
There isn't one.
bigstarrynight said:
There isn't one.
Click to expand...
Click to collapse
ohh , thats odd. i"m wondering if the kernel but that causes wake locks were fixed.
By the way, I'm located in Singapore
dotslashbin said:
ohh , thats odd. i"m wondering if the kernel but that causes wake locks were fixed.
By the way, I'm located in Singapore
Click to expand...
Click to collapse
There is a topic about the update in which Dr. Ketan says the following:
UPDATE what is new
- POPup PLAY watch movies when you mailing…. (Galaxy SIII)
- Restart button is green.
- Some icons changed.
- Faster.
- Signature unlock.
dotslashbin said:
ohh , thats odd. i"m wondering if the kernel but that causes wake locks were fixed.
By the way, I'm located in Singapore
Click to expand...
Click to collapse
HiYa from Scotland!!
It's early days, but I'm sure guys will be into 4.0.4 and find out exactly what's good and what isn't. Just one thing, don't factory re-set until we see positive news about the eMMc brick bug that affects the SGN running ICS
My note is not hot after upgraded to 4.0.4 and it is faster, the pattern lock screen changed. Wake lock still testing on it. (Need to test out if this extends the battery)
Sent from my GT-N7000 using xda app-developers app
My galaxy note is running perfectly now, that means faster, and I dont' have to do all those tricks to get a deep sleep.
However, what I am about is this feature that I read somewhere. Too bad I was in a hurry that time, and didn't get a chance to save the link , but what it mentioned was that this "premium" version gave the capability where you can directly write into the s-note app, without the need to open the app. I am imagining that if you you have it on your main screen, you can directly write to it already, unlike before when it needed to open the app before you can do something.
Was these all true? or did I assume wrong?
dotslashbin said:
My galaxy note is running perfectly now, that means faster, and I dont' have to do all those tricks to get a deep sleep.
However, what I am about is this feature that I read somewhere. Too bad I was in a hurry that time, and didn't get a chance to save the link , but what it mentioned was that this "premium" version gave the capability where you can directly write into the s-note app, without the need to open the app. I am imagining that if you you have it on your main screen, you can directly write to it already, unlike before when it needed to open the app before you can do something.
Was these all true? or did I assume wrong?
Click to expand...
Click to collapse
Yes, u must be referring to the quick S Note, but this is available on 4.0.3 already.
S Memo Quick Note>>>
http://forum.xda-developers.com/showthread.php?t=1765415
S Memo doesn't open after ICS 4.0.4 Update on GT-N7000
Hi Folks,
I updated my GT-N7000 to ICS 4.0.4 update (87Mb, India) through OTA, and after that the S Memo doesn't open at all. The Application does 'open' but gives a black screen before displaying a message, 'Unfortunately, S Memo couldn't open' and gives me an option to cancel or wait.
Its been a few days since the update and i tried emptying cache, clearing application data and also wiping partition cache but none of it worked.
Please provide a solution for this issue as S Memo is like a canvas for me.
Thanks
does anyone know if its safe to root from here directly and flash from it directly? or do i still need a aosp before flashing new roms

List of Bloatware LS980 (Sprint)

Here are the list of bloatware I've removed/froze from my G2.
DISCLAIMER: I've done this by trial and error. I'll note what I believe the app is and sources to where I found the info, if applicable.
I don't believe this is a complete list, just what worked for me. Feel free to add/customize to suite your needs!
------Bloatware Froze------
Sprint Android Requirements 4.1-1
Sprint Connections Optimizer 1.4.601
Sprint ID 1.9.22
Sprint Installer
Sprint Worldwide 1.0
Sprint Zone 4.5.31
SprintExtensionProvider (Used by VVM)
Update Device 4.5.1.10 (Used in Software Updates: Update PRL, Update Profile, etc..)
------Bloatware Removed------
LGSystemSaver (Activates QuickView window if you have a QuickView case)
Voice Mate (LG "Siri")
Maluuba QVoice Interface 1.3.4q
QVoice Engine 4.1605.36624R (Required by Voice Mate)
QVoice Speech Pack 4.0100.33464
AAT 4.2.2
Answer Me 1.0 (Answers phone when put to ear) Thanks to: WhiteZero
App Updates 4.0.80
Camer test 1.0.14
CloudHub 1.20.12
ELTest 1.0
Favorite Contacts-Widget 4.1.4
GNSS-Air=Test 4.2.2..
GnssTest 1.2.3.22
Google Backup Transport 4.2.2-612687
Goolge Play Books 2.8.61
Google Play Magazines 2.0.0
Google Play Movies & TV 2.4.14
Google Play Music 5.0.1041J.689753
Google+ 3.6.0.44338848
Key Chain 4.22
LG Backup 4.0.20.2
LG GNSS-1.0
LG Intelligent Agent 0.6.1
LG MLT 2.4.7 (http://forum.xda-developers.com/showthread.php?t=2187920)
LG TTS+ 2.3.0.4-E2M1
LG VPN 2.6.1
LGATCMD-Service 4..80ZV7..
LGInstallService 4.0.70
LGSearchWidgetProivder 4.0.6
LGSetupWizard 4.3.019
Life Square 4.0.28
Life Square Log Manager 2.5.42
MirrorLink Cert Test - 80ZV7.1378543552
Mobile print 1.1.101
NextRadio1.0
Notebook 4.0.21
Pico TTS 1.0
Plug & Pop 4.2.16 (http://forum.xda-developers.com/showthread.php?t=2460568)
POLARIS Office View 5.5.0.x
Qualcomm IZat 1.0
Shutdown Monitor 80ZV7
SmartShare-Beam 1.045
SmarShareProvider 1.0.14
Task Manager 4.0.15
Text Link 4.3.13
Text Link Engine 1.6.6
TextTranslator 4.1.10
The Little Prince 3.0.18
Update Center 4.0.60
Video Editor 4.0.70
Video Trim 4.0.19
VMWare Ready 1.3.2
VPNDialogs 4.2.2.L.80ZV7.1378543552
VUTalk 4.0.33
Widevine Keybox Test 80ZV7.1378543552
Sources:
http://www.andromods.com/apps-mod/h...ve-bloatware-list-of-apps-safe-to-delete.html
that is some bloat!! they all seem to have bloat but your version and the Korean variants do seem to have a lot more,i'm sure the phones must run a little better once all that is removed, nice one for getting rid.
It has been running smoothly. Also happy not to be constantly nagged by sprint optimizer and other useless apps.
Sent from my LG-LS980 using xda app-developers app
I have the international version but most are the same. I read the above and frosen all with titanium to test. If you have the time, it would be very helpfull to write what every one is doing so, to froze only what everyone needs.. Thanks,
Edit
1. i lost vibrasion
2. when swapping finger from home softkey, it froze for a moment and dont see options serch etc.
3. Lg keyboard goes veeeeery slow in every press..
Do you know which files is for them? Thanks
Edit2 . OK It was my fault. I was frozen by accident LGSystemServer.. Ok now..
Would the bloatware you removed be safe to remove from another model? I have the d803 canadian variant and haven't seen a list of safe apps to remove yet.
ms54 said:
Would the bloatware you removed be safe to remove from another model? I have the d803 canadian variant and haven't seen a list of safe apps to remove yet.
Click to expand...
Click to collapse
99% yes. You just won't find some applications from the above list..
I must say that my phone is smoother definitelly.
Sent from my LG-D802 using XDA Premium 4 mobile app
sosimple said:
I have the international version but most are the same. I read the above and frosen all with titanium to test. If you have the time, it would be very helpfull to write what every one is doing so, to froze only what everyone needs.. Thanks,
Edit
1. i lost vibrasion
2. when swapping finger from home softkey, it froze for a moment and dont see options serch etc.
3. Lg keyboard goes veeeeery slow in every press..
Do you know which files is for them? Thanks
Edit2 . OK It was my fault. I was frozen by accident LGSystemServer.. Ok now..
Click to expand...
Click to collapse
I'm not sure how you lost vibration or why your keyboard loads slow. I am not having any those issues. I would recommend posting a screenshot or list, that outlines the differences between mine and yours.
ms54 said:
Would the bloatware you removed be safe to remove from another model? I have the d803 canadian variant and haven't seen a list of safe apps to remove yet.
Click to expand...
Click to collapse
For the most part yes. If you are not a risk taker, I would recommend you use Titanium Backup Pro and freeze the app before removing it (and of course create a full TB backup).
Sent from my LG-LS980 using xda app-developers app
IcemanF-22 said:
I'm not sure how you lost vibration or why your keyboard loads slow. I am not having any those issues. I would recommend posting a screenshot or list, that outlines the differences between mine and yours.
For the most part yes. If you are not a risk taker, I would recommend you use Titanium Backup Pro and freeze the app before removing it (and of course create a full TB backup).
Sent from my LG-LS980 using xda app-developers app
Click to expand...
Click to collapse
yea I have titanium backup, learning how to use it right now. I'm only rooted though I dont have twrp or cwm installed. Is it a big risk for me to be doing this or do I need them installed because I only plan to root no flash or roms for me.
I can't say with 100% certainty as we have different models. I can tell you from my experience that I was fine with TB backup.
Sent from my LG-LS980 using xda app-developers app
If you like the feature where it answers a call when you put the phone to your ear, don't uninstall Answer Me.
Bookmarking this.
Anyone know if G2 has that "Carrier IQ" people have been referring to. How can we remove it If so?
Thanks for the post!!!
Awesome post! We should keep this populated with adverse effects so we can understand what some of the apps do or don't do.
I froze most of the apps you have listed without any real noted problems.
Thanks!
I'll do my best to update the original posts as others let me know what they find or if I discover any adverse effects. I'll note, having to work with sprint programming has been a bit dicey with what I've frozen. No permanent damage thus far.
IcemanF-22 said:
I'll do my best to update the original posts as others let me know what they find or if I discover any adverse effects. I'll note, having to work with sprint programming has been a bit dicey with what I've frozen. No permanent damage thus far.
Click to expand...
Click to collapse
Thanks!!! Can you put anything you are adding separate from the current list so we don't have to go through the entire list again to see what's new?
I did everything in the first post and now when I reboot, I get an error at bootup. The error is...
Sorry! Unfortunately, Update Device has stopped.
Is there a way to stop this from popping up every time I power on the cell?
ChrisFSU said:
Thanks!!! Can you put anything you are adding separate from the current list so we don't have to go through the entire list again to see what's new?
Click to expand...
Click to collapse
I'll try to do something such that it is clear what the updates are.
ChrisFSU said:
I did everything in the first post and now when I reboot, I get an error at bootup. The error is...
Sorry! Unfortunately, Update Device has stopped.
Is there a way to stop this from popping up every time I power on the cell?
Click to expand...
Click to collapse
Is Update Device frozen? I recall getting that when update-device is frozen and/or not all of the sprint stuff are frozen.
IcemanF-22 said:
I'll try to do something such that it is clear what the updates are.
Is Update Device frozen? I recall getting that when update-device is frozen and/or not all of the sprint stuff are frozen.
Click to expand...
Click to collapse
Thanks for the reply. Yes, it is. I've frozen everything here...
Sprint Android Requirements 4.1-1
Sprint Connections Optimizer 1.4.601
Sprint ID 1.9.22
Sprint Installer
Sprint Worldwide 1.0
Sprint Zone 4.5.31
SprintExtensionProvider (Used by VVM)
Update Device 4.5.1.10 (Used in Software Updates: Update PRL, Update Profile, etc..)
ChrisFSU said:
Thanks for the reply. Yes, it is. I've frozen everything here...
Sprint Android Requirements 4.1-1
Sprint Connections Optimizer 1.4.601
Sprint ID 1.9.22
Sprint Installer
Sprint Worldwide 1.0
Sprint Zone 4.5.31
SprintExtensionProvider (Used by VVM)
Update Device 4.5.1.10 (Used in Software Updates: Update PRL, Update Profile, etc..)
Click to expand...
Click to collapse
I would try re-enabling the sprint services again and then freeze them all leaving update-device the last one to freeze.
I took a closer look and we match. Another option is to give apply frozen filters in TB and post them so we can compare.
What I think is happening is it is still trying to do a firmware check and update (assumption).
Update Device Stopped
ChrisFSU,
I've reverted my phone to stock and went through the list again. I only get the error when update-device is not frozen. If it's already frozen and you have a NAND backup feel free to uninstall. Just keep in mind that you will not be able to use any of the update functions of the phone like PRL, profile, unlock etc..

S8/S8+ Oreo Beta is live!!!

There's 10,000 slots available instead of the Sammobile reported 7500 slots available. Once you click a few agreements, you get in automatically but then nothing happens. You have to force the update by going into Settings\Software update. The update happens normally then. The settings menu has changed quite a bit, Oreo is MUCH snappier (especially reboots), and some icons have changed. The warning in the last screenshot comes up automatically about 20 seconds after each reboot. Good luck getting in!!! :highfive:
I'm in feelsgood.jpg
Can someone post the OTA? OR Odin flashable files if there is any way to get them?
I don't see it. Any way to force it?
najoor said:
Can someone post the OTA? OR Odin flashable files if there is any way to get them?
Click to expand...
Click to collapse
The OTA downloads to the /cache folder which non-rooted users don't have access to. I wasn't rooted and I don't think you can be in order to join the Beta. Trust me, Sammobile would have posted it already if this was possible.
bogdi1988 said:
I don't see it. Any way to force it?
Click to expand...
Click to collapse
You have to be either a T-Mobile or Sprint customer or have the unlocked model. It won't appear for anyone else. It will ONLY show up in the Samsung+ app. If you don't see it on the main screen, use the 3 dot menu on the left to see if it shows up there like the screenshot I posted.
I would love to get my hands on the radio and at least flash the modem. Would that work?
Here's the official press release: https://news.samsung.com/global/sam...ta-now-available?CID=AFL-hq-mul-0813-11000279
milan03 said:
I would love to get my hands on the radio and at least flash the modem. Would that work?
Click to expand...
Click to collapse
Sure, you could flash the modem if anyone could get the OTA but I'm pretty sure it'd be quite difficult. Since we're not rooted, you'd literally have to catch the OTA transmitting over your WiFi network onto your PC and then extract it. Which reminds me....
@bogdi1988 - Perhaps it's not showing up for you because you're not connected to a WiFi network. Make sure you're logged in to your Samsung account in Galaxy Apps and that all your Samsung Apps are up to date (the only way they update is when on WiFi.) Then check the Samsung+ app to see if it shows up for you. Hope this helps.
docnok63 said:
Here's the official press release: https://news.samsung.com/global/sam...ta-now-available?CID=AFL-hq-mul-0813-11000279
Sure, you could flash the modem if anyone could get the OTA but I'm pretty sure it'd be quite difficult. Since we're not rooted, you'd literally have to catch the OTA transmitting over your WiFi network onto your PC and then extract it. Which reminds me....
Click to expand...
Click to collapse
What about the basic stuff like: adb logcat > file.txt
Then check for updates, extract the url and manually download the OTA?
docnok63 said:
Here's the official press release: https://news.samsung.com/global/sam...ta-now-available?CID=AFL-hq-mul-0813-11000279
@bogdi1988 - Perhaps it's not showing up for you because you're not connected to a WiFi network. Make sure you're logged in to your Samsung account in Galaxy Apps and that all your Samsung Apps are up to date (the only way they update is when on WiFi.) Then check the Samsung+ app to see if it shows up for you. Hope this helps.
Click to expand...
Click to collapse
Samsung account signed in. All apps are updated. Tried wireless and cell signal and no prompt. Reinstalled the app a few times. Still nothing.
milan03 said:
What about the basic stuff like: adb logcat > file.txt
Then check for updates, extract the url and manually download the OTA?
Click to expand...
Click to collapse
I updated hours ago and have rebooted several times since updating. I don't think I'd have a chance of finding the file name at this point. It would've been best to start a logcat right before initializing the OTA.
bogdi1988 said:
Samsung account signed in. All apps are updated. Tried wireless and cell signal and no prompt. Reinstalled the app a few times. Still nothing.
Click to expand...
Click to collapse
Damn dude
Yea! Super bummed about it!
---------- Post added at 10:27 PM ---------- Previous post was at 09:31 PM ----------
docnok63 said:
The OTA downloads to the /cache folder which non-rooted users don't have access to. I wasn't rooted and I don't think you can be in order to join the Beta. Trust me, Sammobile would have posted it already if this was possible.
You have to be either a T-Mobile or Sprint customer or have the unlocked model. It won't appear for anyone else. It will ONLY show up in the Samsung+ app. If you don't see it on the main screen, use the 3 dot menu on the left to see if it shows up there like the screenshot I posted.
Click to expand...
Click to collapse
On T-Mobile. Been looking in both places each time...
attached is proof it works. im running stock Oreo no root.
Sent from my SM-G955U using XDA-Developers Legacy app
My "upgrade" did not go well. Turns out that package disabler pro is not playing nice with this update. I kept getting Android system has stopped and couldn't even load the main home screen. I gave up finally and hard reset and resintalled all my apps. I also had a pretty bad problem with the battery draining faster than it was charging on a wall plug. Factory reset was a pain to reinstall everything (still ongoing as I need apps, I reinstall them) but the battery issue has disappeared. Can't tell if WiFi is any better. Opinions on this release would be most welcome.
sanjsrik said:
My "upgrade" did not go well. Turns out that package disabler pro is not playing nice with this update. I kept getting Android system has stopped and couldn't even load the main home screen. I gave up finally and hard reset and resintalled all my apps. I also had a pretty bad problem with the battery draining faster than it was charging on a wall plug. Factory reset was a pain to reinstall everything (still ongoing as I need apps, I reinstall them) but the battery issue has disappeared. Can't tell if WiFi is any better. Opinions on this release would be most welcome.
Click to expand...
Click to collapse
You're complaining about a third party app that disables stock apps that is NOT updated to support Oreo yet not playing nice with a Beta build??? Absurd. I'm quite sure the upgrade went as smoothly for everyone else as it did me.
As for my feedback, I haven't noticed a single hiccup with the build. It doesn't feel like a Beta. It seems like it could've been a final/official build.
Samsung+ never showed the update to me. Oh well. :crying:
Yes, I'm on T-Mobile S8+ in US.
FiddleGoose said:
Samsung+ never showed the update to me. Oh well. :crying:
Yes, I'm on T-Mobile S8+ in US.
Click to expand...
Click to collapse
It's not about "showing" it to you. They're pushing it to almost everyone. I spoke with 3 other guys who signed up and registered through the Samsung app and it pushed it on the next update.
sanjsrik said:
It's not about "showing" it to you. They're pushing it to almost everyone. I spoke with 3 other guys who signed up and registered through the Samsung app and it pushed it on the next update.
Click to expand...
Click to collapse
So you see, I don't think my Samsung account is registered to their Beta program. I have never seen links to do so.
I guess as a small consolation, Samsung/TMo pushed a Nougat update out: https://www.sammobile.com/firmwares/galaxy-s8/SM-G955U/TMB/download/G955USQU1AQJ8/193749/
docnok63 said:
You're complaining about a third party app that disables stock apps that is NOT updated to support Oreo yet not playing nice with a Beta build??? Absurd. I'm quite sure the upgrade went as smoothly for everyone else as it did me.
As for my feedback, I haven't noticed a single hiccup with the build. It doesn't feel like a Beta. It seems like it could've been a final/official build.
Click to expand...
Click to collapse
LOL, that wasn't a "complaint" that was an observation. As noted by the no complaint and an observation comment. As far as not noticing it's a beta, would that be between the 15 or so times per minute that the software pops up a warning that this is beta software and may not work as well as expected and may cause problems? That not obvious it's a beta message? Also, the bad battery drain was an issue. That shouldn't happen no matter what.
docnok63 said:
I guess as a small consolation, Samsung/TMo pushed a Nougat update out: https://www.sammobile.com/firmwares/galaxy-s8/SM-G955U/TMB/download/G955USQU1AQJ8/193749/
Click to expand...
Click to collapse
Is there a mirror with speeds faster than 15kB/sec ?
The Image is 3.6GB this will take half a day.
Thanks again!

Categories

Resources