Database Users

[Q] G2 d800 with d802 rom/firmware bad flash

I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.

iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash

bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help

same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app

x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery

ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.

I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out

kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.

iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere

kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll

well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now

kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking

Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you

Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday

[Q] Crossdl [D803] to [d800] - Help!

My phone is ATT D800. It is rooted and has CWM custom recovery. I live in Canada and use Telus as my provider.
Last night I flashed Bell Stock D803 rom. I loved the rom, the phone was nice and zippy, but every time I restarted, it forgot settings, wifi would be off, and I would have to reset the APN settings. I was able to flash my phone back to stock ATT using Custom DLL LGUP_8974.dll and and the stock ATT JB provided by hyelton. It worked with no issues. I was using the phone all day today and noticed that I had really bad signals with the ATT modem. So like a fool, I decided to try the Bell rom again - big mistake! Now my phone is in an endless loop. I can go into download and recovery mode no problem but I can't do anything else.
I have been trying to use the LG Flash Tool to restore and I am now getting Crossdl [D803] to [d800] errors. I rebooted into recovery thinking that I would be able to sideload another rom to at least get the phone working - no go. When I run adb devices - it isn't seeing my phone in recovery. If I to a factory restore, it goes in a boot loop and I get screen after screen asking me if I want to format. When I check the device manager - instead of seeing my phone, I see qhsusb_bulk.
I've also tried to flash ROM KDZ Method for bell D803 but this doesn't work for me either. When I get to - 3. select Normal web upgrade test - I get the next screen to click upgrade start but then after that, the BC2App loads and tells me that there is no updates. I never get the screen wanting me to choose a country. And yes, I've followed the steps too many times to count now.
At this point, I don't care if my phone is running D800 software or D803 - I just want it to work. Can someone please help?

If you have a d800 you shouldn't install a d803 ROM I believe there are hardware and kernel changes between both of them ... The radios are different... Try installing a d800 ROM if you can access recovery by sideload and then install a d800 modem
---------- Post added at 12:16 PM ---------- Previous post was at 12:15 PM ----------
And after that just change the APN and enable fast dormancy ... I believe telus supports it too

kmacsouris said:
My phone is ATT D800. It is rooted and has CWM custom recovery. I live in Canada and use Telus as my provider.
Last night I flashed Bell Stock D803 rom. I loved the rom, the phone was nice and zippy, but every time I restarted, it forgot settings, wifi would be off, and I would have to reset the APN settings. I was able to flash my phone back to stock ATT using Custom DLL LGUP_8974.dll and and the stock ATT JB provided by hyelton. It worked with no issues. I was using the phone all day today and noticed that I had really bad signals with the ATT modem. So like a fool, I decided to try the Bell rom again - big mistake! Now my phone is in an endless loop. I can go into download and recovery mode no problem but I can't do anything else.
I have been trying to use the LG Flash Tool to restore and I am now getting Crossdl [D803] to [d800] errors. I rebooted into recovery thinking that I would be able to sideload another rom to at least get the phone working - no go. When I run adb devices - it isn't seeing my phone in recovery. If I to a factory restore, it goes in a boot loop and I get screen after screen asking me if I want to format. When I check the device manager - instead of seeing my phone, I see qhsusb_bulk.
I've also tried to flash ROM KDZ Method for bell D803 but this doesn't work for me either. When I get to - 3. select Normal web upgrade test - I get the next screen to click upgrade start but then after that, the BC2App loads and tells me that there is no updates. I never get the screen wanting me to choose a country. And yes, I've followed the steps too many times to count now.
At this point, I don't care if my phone is running D800 software or D803 - I just want it to work. Can someone please help?
Click to expand...
Click to collapse
I can help you. I need original dll for your phone. i made some changrs and you flash your g2 with TOT method. I am from Ukraine. Sorry for my english. if you still need the help - write in private message.

I need help D802
maloma99 said:
I can help you. I need original dll for your phone. i made some changrs and you flash your g2 with TOT method. I am from Ukraine. Sorry for my english. if you still need the help - write in private message.
Click to expand...
Click to collapse
hi maloma99
I need your help my lg g2 is bricked please,
i am trying to install D802 .tot file, my phone is already D802, but
the error is crossDL [] to [D802]

[Q] Bricked LG G2?? D-801 ( WIND ) HELPPP

Ok, hey guys, got myself in a really deep hole here i believe..
So i tried to install a recovery threw KK Rec file, must have installed the wrong one...
After the app rebooted the phone it went to the exact screen shown in the pic ...
now how can i get this phone working???, fastboot commands all work...
ive flashed a recovery but cant boot into it as the phone wont power off...
if anyone has any ideas , im open to all...
i do have the LG Flash tool available and a Custom ROM on hand
I do not have a stock file ..
Phone is rooted
Thanks for help , anything is great
Update ..
tried to flash a ROM as an Update.zip, get error back
also now get that screen when i hold all buttons down , not sure, never got that before

Shotgun4 said:
So i tried to install a recovery threw KK Rec file, must have installed the wrong one...
Click to expand...
Click to collapse
I did the exact same thing because the ****ing jokers at LG / Wind labeled the phone wrong.
It's actually a D803. Yeah, despite what it says on the case.
You can find my solution in my post history here.. You need to flash a .laf file with fastboot to get your download mode re-enabled, then you can apply a stock .kdz file to bring your phone back to stock.
Then use the D803 files and no worries! You can fix this.
If you're scared, I can also recommend a respectable shop in Toronto that can fix it easy.

Flashed Wrong TOT file in LG Flash Tools...HELP!

Hey guys, Need a little help. Have an LG G2 D800 ATT, I accidentally flashed the Tmobile D801 into the phone, now LG Flash Tools wont recognize my phone as a ATT when I try to flash the TOT file for it..I am still able to get into Download Mode, no recovery, phone starts up as T-Mobile, but no data works and every 5 mins it restarts... Any help will be gladly appreciate any help on this! Been trying to figure this out all night =(

Jstlouis1993 said:
Hey guys, Need a little help. Have an LG G2 D800 ATT, I accidentally flashed the Tmobile D801 into the phone, now LG Flash Tools wont recognize my phone as a ATT when I try to flash the TOT file for it..I am still able to get into Download Mode, no recovery, phone starts up as T-Mobile, but no data works and every 5 mins it restarts... Any help will be gladly appreciate any help on this! Been trying to figure this out all night =(
Click to expand...
Click to collapse
Hi did you fix your phone .
I have exactly the same problem.

safetaga said:
Hi did you fix your phone .
I have exactly the same problem.
Click to expand...
Click to collapse
I did fix the issue by changing the ATT TOT file using a HEX Editior to Verizon tags, So when using LG Flash Tools, It'll flash it. Then Root it, install ATT recovery, and flash an ATT rom using Cloudy Rom. Then back to LG Flash Tools to flash a completly stock ATT.
Only issue I'm still having is I lost my IMEI and didn't have one back up. There is a Tut on how to get it back using QSPT, but I'm currently looking for a professional to that job for me...Phone is normal everything work except for my Mobile data and cell service.
If anything I can show you the right direction where to edit the TOT file and etc..

http://forum.xda-developers.com/showpost.php?p=56961336&postcount=251

My LG G2 can only enter download mode

So, I was trying to install a custom ROM on my G2 and screwed up. Now I have no recovery to boot into and can't access fastboot to flash a recovery (not even sure if its possible). I have tried to flash the stock android .kdz files using the LG Flash Tool, but haven't had any success in that area either. I'm not really sure to go from here.
If anyone has any ideas that I might go about fixing this mess, they would be most welcome.

Shlinky12193 said:
I have tried to flash the stock android .kdz files using the LG Flash Tool, but haven't had any success in that area either.
Click to expand...
Click to collapse
Elaborate please. Why haven't you had any success? What have you tried? What problem(s) are you encountering?

Thus far I've been trying to load the stock ROM back onto the phone but haven't had any luck as the process keeps stopping at the software update stage. It either says the server can't connect or it fails at 2%. I have the phone driver and I'm pretty sure I have the right .kdz file.
Throughout all this the phone doesn't actually begin the 'update'. The phone is on the Firmware Update Screen and stays at 0%.

So I actually did manage to fix this in the end. Just screwed around with the files and flash tools till it eventually worked.