Database Users

[Q] [q] heelp mee pleaase !!

heei guys .
half a year before I bought the zte blade, and so far it worked well.
but suddenly it stops working ..
whenever I try my cell phone goes immediately to start the red "back" button on (bright red) and then there's the green robot android, then the blue zte intro and then it all over again ..
I have not changed my zte (clockwork, rom)
I know myself well not so good ..
would be really nice if someone could help me ..
I do not know what to do ..!!!
or is it maybe bricked ?!
thanks ..

Its not bricked as it still boots up.
When exactly does the phone crash - when you make a call, start an app, or just automatically reboots?
Did you install a new app just before this started happening?
Is the phone rooted?
Are you sure the battery is ok? Try starting phone with charger plugged in.

ouh ..
yes when i switch the phone on the android boot logo cames then the (blue) zte intro .. and then the zte intro comes again and again ...
noo ..
aahm ? i dont do anything with the pc and the zte ..
so i think i dont root it or something ..
one time there was "ftm" on the screen (after it had this problem).. but i didnt know what this is ..
thank you in front off !!!

but i didnt came anymore to the homescreen , or lock screen

Try booting into recovery and clear the cache? I remember my old G1 did the same thing, and after clearing the system cache it worked.
To boot into recovery i think you keep hold of volume down when turning the device on.
If that doesn't work you could wipe the device, but you'll loose everything on it then.
Sent from my ZTE BLADE using XDA App

The issue you have is this, the rom that has been flashed to the phone is for Gen 2, but the phone is still set on Gen 1.
You'll need to boot into recovery and perform a restore, or flash Ginger stir Fry Rom, then the phone will work.
sent using tapatalk

Solutions depend on
-- whether or not u have custom recovery installed ,
-- whether or not fastboot is enabled in your device. (It isn't enabled only in stock gen2 firmware)
-- whether or not u have rooted and made changes to system partition.
Possible solutions
-- If u have custom recovery installed then format (= wipe data/factory reset) the device from the recovery.
Power off the device. Then by holding volume down power on the device. This takes u into custom recovery menu if it is installed. If custom recovery isn't installed this takes you to FTM MODE.
-- If u have fastboot enabled then use this method to format ur device. Power off the device. Then hold volume up and power on the device. Here the device should stay at green android logo forever if fastboot is enabled. This is fastboot mode. Now install zte USB drivers in PC and connect phone in fastboot mode to PC. It will install the software. Now in device manager u shouldn't see any android named devices with yellow unrecognised format. Then use fastboot windows tools from command prompt. The command to format tthe device is
fastboot erase userdata
-- if the above processes didn't work then using tpt is recommended way. U can flash complete low level device firmware using tpt. U can flash either a recovery alone to hard reset. Or u can flash a complete rom. On bit searching at modaco u will get more information regarding everything.
Sent from my Blade using XDA App

THANK YOU !!
but i dont understand that things .. ?!
can you explain me your answer for people do not understand much of it ?

Download gen1 to gen2 (there is a download link in this section) http://forum.xda-developers.com/showthread.php?t=1258855
Unzip the file and place the image ( the image is called image, not gen1 to gen2) on the root of your sd card (ideally it is best to do this on a pc)
Also download and place the Rom you wish to use on the root of your SD card (cyanogenMod 7.1.0 stable release works well) http://forum.xda-developers.com/showthread.php?t=1297776
DO NOT UNZIP THE ROM at this stage.
Put the SD card back into the phone.
Power off the phone, hold menu & vol + (up) & power at the same time, you should see some green writing, wait until it is finished (well done your phone is now gen2)
You should now arrive at the clockwork recovery screen, if not power off the phone, then hold vol - (down) and power (together), clockwork will boot.
Now using clockwork recovery, clear data/factory reset, then install your rom from the zip, that is all there is to it, obviously you'll have to enter your login details to use the market and sync your contacts etc, but your phone should now be working.
Don't forget to make a nandroid backup.
Goodluck
sent using tapatalk

THANK YOU VERY VERY VERY MUUCHH !!!!
it works perfect !!!!!!!
thanks ((((

You are very welcome
sent using tapatalk

[Q] [HELP] Defy is bricked, PC doesn't recognize it

Hi everybody
I have Motorola Defy, but after I plug in the usb cable to defy and PC , rsd lite 4.9, 53.1. or 5.5 doesnt recognize my device..
After plug in it shows only white led and nothing more, nothing at all...
I tried every method , but unsuccessfull...
Everytime i try tu plug in, it just shows white led, nothing more, screen is black, and PC doesnt recognize it at all...
What should I do to unbrick it ???
Pls help, I'm desperate ... Thank you
PS: I tryed every method, I searched almost everywhere

When you plug it in first make sure battery full charge then load rsd lite and under settings change it to first come first serve. I had same issue and this worked.
Sent from my MB501 using Tapatalk

I'm having the same issue.hopefully it works I'll get back to you after that
Sent from my SGH-T989 using Tapatalk

Have you tried entering bootloader and then connect the phone to PC? I got RSD lite recognizing my phone this way.

yuffany said:
Have you tried entering bootloader and then connect the phone to PC? I got RSD lite recognizing my phone this way.
Click to expand...
Click to collapse
I can't power up the phone, I can't enter boot menu or even download mode, nothing, before brick: I just plug usb into phone and usb and i could flash througt rsd whatever I want to but now I plug the usb cable into a phone and PC dooesn'r recognize my defy...
Just white led and black screen...

djmajino said:
I can't power up the phone, I can't enter boot menu or even download mode, nothing, before brick: I just plug usb into phone and usb and i could flash througt rsd whatever I want to but now I plug the usb cable into a phone and PC dooesn'r recognize my defy...
Just white led and black screen...
Click to expand...
Click to collapse
??
Have you tried my suggestion.. I had same issue.. black screen with white lite.. you need to have full battery then plug the phone in and run rsd lite with settings on first come first serve..
if
your phone does load with a full charge then hold volume up and power button to get into the bootloader menu.. after than then plug into rsd lite..
to make things easy let us know what happens after you put a batter with full charge on it.. then we can go from there..

yes , I have full battery, I set the rds lite to option firt-come-first-serve, but nothing happend
I can't get into bootloader, I can't power the phone up, I can't get into mode... Nothing
Still the same probem, still not solved, Any idea what could be with it ??

Check the drivers
Sent from my GT-P1000 using xda premium

djmajino said:
yes , I have full battery, I set the rds lite to option firt-come-first-serve, but nothing happend
I can't get into bootloader, I can't power the phone up, I can't get into mode... Nothing
Still the same probem, still not solved, Any idea what could be with it ??
Click to expand...
Click to collapse
try these steps..
take phone battery out and wait few seconds..
then put batter back in and hold volume up and power button for few seconds.. let go of power button and then let go of volume up button..
your phone screen will still be black and no light will be lit up..
then connect usb cable to phone then to pc.. after that you load up RSD lite with the setting of first come first serve.. you should see a line in middle of window that says.. "connected" at this point your phone might display white light ..it sometimes doesn't but as long as rsd lite shows connected your fine.. at this point you should be able to run sbf files

The defy doesn't even power up when I push the power button

djmajino said:
The defy doesn't even power up when I push the power button
Click to expand...
Click to collapse
are you reading the steps??? clearly says that the screen might not light up or lights might not turn on..but thats ok..
before we do all this did you make sure your battery is fully charged?
please read my last steps carefully and try it out..i was in same boat and worked for me

dilfatx said:
are you reading the steps??? clearly says that the screen might not light up or lights might not turn on..but thats ok..
before we do all this did you make sure your battery is fully charged?
please read my last steps carefully and try it out..i was in same boat and worked for me
Click to expand...
Click to collapse
I tried McGyver hack, phone was connected, I did flash 2.51.1 UK version non carries, but nothing did,
On screen was:
SW update
In progrees
at RSD was Phone is being rebooted and PASS, but nothing on phone screen

Defy is working againg, but I was at the service

so using the MacGyver hack method enabled your computer to see your phone again?
I have the same problem (flashed wrong rom, phone bricked with just a black screen, flashed the same wrong rom again hoping for a different result, still bricked, read up on what was going wrong, came back the next day and my computer (including RSD Lite) could no longer see my Moto Defy. Next step i'm either going to have to (1)borrow another Moto Defy battery that is guaranteed fully charged (i have no way to check the amount of charge in mine while my Defy is out of action) or (2)cut up a USB cable and do the MacGyver hack.

1. Make sure your battery is charged.
2. Make sure you've all the latest drivers from Motorola's Website installed.
3. Make sure your RSD Lite version is atleast 4.9. I use v5 and had no problems till now.
4. Boot into bootloader mode.
5. Flash
If it doesn't work:
Try MacGyver hack.
In case you don't know what it is, search here in xda forums. You'll find it.

Update your drivers and do the same as above
Sent from my MB525 using xda premium

Same as above worked 4 me I needed to put on the latest gb rom the non downgrade one.
defy cm7

komakaze said:
Next step i'm either going to have to (1)borrow another Moto Defy battery that is guaranteed fully charged (i have no way to check the amount of charge in mine while my Defy is out of action) or (2)cut up a USB cable and do the MacGyver hack.
Click to expand...
Click to collapse
Option 3 is to buy a cheap standalone wall charger for the Defy battery off eBay, like this one, to keep your battery charged between attempts to flash the phone. Gotta be less risky than the McGyver hack.

Not sure if the standalone wall charger will work, seems to me that the phone doesn't actually recognise the battery, however I have no means to test this and it's just a guess.
If it does actually detect your battery level but just can't charge it then what you listed is fine.

hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: Please Google defy stock rom!!! googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
---------- Post added at 05:37 AM ---------- Previous post was at 05:30 AM ----------
Sorry, Google defy stock recovery!!!

[Q] Stuck on logo

Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy

wahoby said:
Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy
Click to expand...
Click to collapse
litle bit same problem with me, my phone stuck on cyanogen 9 logo, but no bootmenu is showing.

wahoby said:
Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy
Click to expand...
Click to collapse
You post is too large(in terms of fonts) to read...it hurt my eyes!!
anyways, about the issue, I guess your phone's battery in not charged. Please make sure to charge the battery using the charger and once it done then boot your phone and when you see blue LED blinking press both volume keys together... this will make your phone to boot into boot menu....now do a data/cache wipe and reboot....
However, if this does not helps then you will be required to flash with the SBF. refer to Defy Developement section - http://forum.xda-developers.com/showthread.php?t=966537.
Hope this helps!!

Rajneeshgadge17 said:
You post is too large(in terms of fonts) to read...it hurt my eyes!!
anyways, about the issue, I guess your phone's battery in not charged. Please make sure to charge the battery using the charger and once it done then boot your phone and when you see blue LED blinking press both volume keys together... this will make your phone to boot into boot menu....now do a data/cache wipe and reboot....
However, if this does not helps then you will be required to flash with the SBF. refer to Defy Developement section - http://forum.xda-developers.com/showthread.php?t=966537.
Hope this helps!!
Click to expand...
Click to collapse
I was just about to say this myself! ^^. Perfect reply. Thread ended
CM7 + CM9 double boot

my friend the problem is that you cant make nandroid buckup of this rom

thank u all for the quick response..and i am sorry for the fonts
as for the problem,,the battery was fully charged and after the problem i left the phone on the charger for over 8 hrs...and for my friend who suggested to use the boot menu during the blue light..the problem is there is NO blue light or any light,,just as soon as i start the device it shows the Google logo and thats it..no light flashing..no options to do anything. if i can go to boot menu or the recovery menu then i can solve the problem..but i am unable to do anything..so i tried using RSDlite to install an SBF file..but the program isn't able to locate my device..
so right now my device isn't able to go into any boot menu ..nor the RSDlite is able to fix it !!!!

wahoby said:
thank u all for the quick response..and i am sorry for the fonts
as for the problem,,the battery was fully charged and after the problem i left the phone on the charger for over 8 hrs...and for my friend who suggested to use the boot menu during the blue light..the problem is there is NO blue light or any light,,just as soon as i start the device it shows the Google logo and thats it..no light flashing..no options to do anything. if i can go to boot menu or the recovery menu then i can solve the problem..but i am unable to do anything..so i tried using RSDlite to install an SBF file..but the program isn't able to locate my device..
so right now my device isn't able to go into any boot menu ..nor the RSDlite is able to fix it !!!!
Click to expand...
Click to collapse
I'm sure you are are able to boot into the boot loader.
Follow below mentioned steps:
To Flash full SBFs, here is the standard procedure:
1. Open RSD Lite: Click on [ … ] Button and select your .SBF (Remember to rename to a short name and put it on root of your PC) and click Open.
2. Boot your phone into Bootloader Mode (check last section if you don’t know how to do it).
3. Now connect your Defy to your PC
4. The START button on RSD Lite should be available now, click and wait.
Click to expand...
Click to collapse
Fore more info refer to the below mentioned link:
http://forum.xda-developers.com/showthread.php?t=1216982
Use any Froyo SBF or Fixed SBF.
Good Luck!!
---------- Post added at 05:00 AM ---------- Previous post was at 04:54 AM ----------
crakeron said:
I was just about to say this myself! ^^. Perfect reply. Thread ended
CM7 + CM9 double boot
Click to expand...
Click to collapse
Thanks for the compliment lol

my dear friend...i don't know what to say..ur really trying to help me and i want to thank u for all ur efforts..but the RSD isn't able to detect my phone..i have used it b4 and i know how it works..but when i connect the phone to the pc nothing happens..not even a voice notification that a device has been connected..therefore the RSD isn't able to start to fix the phone..i've tried holding the vol up + power but nothing..also both vol +power also nothing..just as soon as i connect the device to the pc or the charger it instantly shows the Google logo and thats it! nothing else happens

Same issue, can't use RSD if you can't first get to the bootloader. Read a thread about using a stripped USB cable to hotwire the battery to get power to flash with RSD, but can't figure out how to link in mobile app.
Sent from my beastly Galaxy S 2.

Here http://forum.xda-developers.com/showthread.php?t=892026
Sent from my beastly Galaxy S 2.

Motorola Bravo HARD BRICKED

Well somehow i bricked my phone,I'm stuck on the Motorola logo,i try using sbf but it does not recognize my phone, oh yeah i had install cm7 diet rom witch really would not let me get into recovery cuz it kept saying that my phone was a htc bravo? So i try a droid bootstrap to see if that work and that's when my phone got bricked, can someone please help,and yes i tried going into recovery by pressing the volume and power button and it takes me into recovery and brings me to the Android and exclamation but that's it, even if i pressed the lower right corner nothing happens

ssfirme said:
Well somehow i bricked my phone,I'm stuck on the Motorola logo,i try using sbf but it does not recognize my phone, oh yeah i had install cm7 diet rom witch really would not let me get into recovery cuz it kept saying that my phone was a htc bravo? So i try a droid bootstrap to see if that work and that's when my phone got bricked, can someone please help,and yes i tried going into recovery by pressing the volume and power button and it takes me into recovery and brings me to the Android and exclamation but that's it, even if i pressed the lower right corner nothing happens
Click to expand...
Click to collapse
Press both volume buttons on the screen with the android and exclamation mark. That'll take you to stock recovery where you need to wipe data and factory reset.
If you have to flash the sbf again, try using sbf_flash on Linux. It'll flash in times where RSD won't recognize your phone.
Linux Live\sbf_flash tut
sbf_flash binary is in attachments
Only use Defy 2nd-init for recovery
(and once its installed, steal /system/bootmenu/* and /system/bin/bootmenu from Defy CM9 from June 5th on up -- touch bootmenu is pretty awesome; replacing the bootmenu isn’t for the feint of heart.)

the only problem is i dont have linux i have windows 7

Use rsdlite sri I don't have a link on me
Sent from my Galaxy Nexus using XDA

Had same type of problem on Friday. Followed this post http://forum.xda-developers.com/showthread.php?t=1559109 now I'm back up and running.

ssfirme said:
the only problem is i dont have linux i have windows 7
Click to expand...
Click to collapse
I dual boot between the two
If you have a blank cd and a usb drive\sdcard you can just use a Linux Live environment -- you never install Linux at all -- and you can use sbf_flash from there.
RSD Lite version that works and tutorial
And since it hasn't been mentioned yet, holding volume up + power on boot access the boot recovery to flash sbf's. Just make sure you have at least 50% battery before flashing or you might get an actual brick.
What your dealing with is nothing more than a recovery screw up. I had the same problem last night installing touch recovery -- it wiped /bootmenu/ instead of installing to it. Solution is to flash sbf, reboot, wipe data/factory reset from stock recovery, reboot, eebluroffee at first screen, root, enable non market apps, Defy 2nd init flash something that's better than stock.

ok i install the motorola usb drivers and start up rsd lite but it does not regocogize my phone

yes i have it in bootloader mode

Did you install everything before plugging phone in?

Try uninstalling everything motorola related and reinstalling just the drivers....On a previous Win7 install nothing was recognized, but on a reinstall of the entire system it worked fine and still does. I still recommend the Linux way over RSD because it will flash your phone regardless, provided you can access the loader.
I still haven't gotten native tethering to work with Windows, but then again, I quit trying sometime around December or January.

ssfirme said:
ok i install the motorola usb drivers and start up rsd lite but it does not regocogize my phone
Click to expand...
Click to collapse
This is for all those people who are having trouble flashing with RSDlite in Vista & WIndows 7.
If I am right, RSD lite does not seem to recognize the sbf file after you select it and instead the "start" button remains grayed out.
If that's the case, here the solution:
I had a similar problem and sucessfully used the command line parameters for RSDlite to force a flash. I managed to get a signed/unsigned firmware installed.
You need to copy the firmware you want to flash into the RSDlite directory in your program files folder.
Make sure you are in bootloader mode first.
Then, open command prompt and "cd" to the RSDlite directory
eg:
> cd C:\
> cd Program Files
> cd motorola
> cd RSDlite
>
now for the flashing type:
> SDL.exe -f xxxx.sbf -t 2
where xxxx.sbf is the firmware you are flashing to the phone.
flashing will begin shortly afterwards.
It worked for me, but in the end, show FAIL STATUS.

skeevy420 said:
I dual boot between the two
If you have a blank cd and a usb drive\sdcard you can just use a Linux Live environment -- you never install Linux at all -- and you can use sbf_flash from there.
RSD Lite version that works and tutorial
And since it hasn't been mentioned yet, holding volume up + power on boot access the boot recovery to flash sbf's. Just make sure you have at least 50% battery before flashing or you might get an actual brick.
What your dealing with is nothing more than a recovery screw up. I had the same problem last night installing touch recovery -- it wiped /bootmenu/ instead of installing to it. Solution is to flash sbf, reboot, wipe data/factory reset from stock recovery, reboot, eebluroffee at first screen, root, enable non market apps, Defy 2nd init flash something that's better than stock.
Click to expand...
Click to collapse
Thank you sooooooooooooooooo much!
After several hours of messing with my brothers Bravo, I finally got it working by following your instructions.
Really: I'm speechlees man.

hard bricked my phone
hello. i'm looking for any help to this issue: i believe i hard bricked my bravo somehow. it was running one of the first MIUI rom for two or more years. but became slow and laggy thru last months. and the other day it just freezed while i was browsing the call log. no reaction to the pover button at all, had to take out the battery. now it gives no reaction to any combination of button presses ( power; vol up + power ; vol down + power), the only signal what see is white LED light when į connect the phone to the PC. When phone is connected to the pc freshly, and when i press Vol down + Power, Windows 7 releases "clink" sound and device manager tries to show that "Motorola USB Device" is connected, but quickly disapears with another Windows sound. RDS lite 5,0 doesnt recognize phone too.
Is there any chance to bring this phone alive? any advise will be appreciated.
p.s. english isn't my native. sorry for the mistakes

dzdonce said:
hello. i'm looking for any help to this issue: i believe i hard bricked my bravo somehow. it was running one of the first MIUI rom for two or more years. but became slow and laggy thru last months. and the other day it just freezed while i was browsing the call log. no reaction to the pover button at all, had to take out the battery. now it gives no reaction to any combination of button presses ( power; vol up + power ; vol down + power), the only signal what see is white LED light when į connect the phone to the PC. When phone is connected to the pc freshly, and when i press Vol down + Power, Windows 7 releases "clink" sound and device manager tries to show that "Motorola USB Device" is connected, but quickly disapears with another Windows sound. RDS lite 5,0 doesnt recognize phone too.
Is there any chance to bring this phone alive? any advise will be appreciated.
p.s. english isn't my native. sorry for the mistakes
Click to expand...
Click to collapse
Not sure if this will help since I did not watch the video myself, but a quick Google search gave me a video describing how to take a Motorola USB cable and modify it to unbrick a phone. I did not watch the video yet so I don't know how relevant it is to your problem. But just by looking at the video preview it looks like the difficulty level may be pretty high... Here is the link:
http://m.youtube.com/watch?v=XwwI_6doBWk
Sent from my LG-D415 using XDA Free mobile app

I can not boot system or go to bootloader. BRICK?

hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...

sterver1 said:
hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...
Click to expand...
Click to collapse
see this http://forum.xda-developers.com/showthread.php?t=1150155 try to charge your battery fully. hope it works..

you tried in another PC o USB cable ?

I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.

sterver1 said:
I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.
Click to expand...
Click to collapse
Try to enter stock recovery ab do a factory reset
If your battery is really empty you can use ab old Nokia wallcharger out else ....... just figure out what is plus and what is minus....
Sent from my MB526 using xda app-developers app

Do you have the appropriate drivers installed on your pc for rsd? You have to be able to flash an sbf, a failed Cm update flash won't brick your Defy, it's much harder to brick it...
Sent from my MB525 using xda app-developers app

lexer98: Yes I tried it... It is same.
bone101: I can not enter to any recovery.
sa3e1: Yes, I have all drivers.
I try the other.

Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app

sa3e1 said:
Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
When I do that, on screen show: Battery Low - Cannot program.
But all is OK because I bought universal charger and now I'm charing battery..:cyclops:
Next I flash correct SBF file via RSD Lite. Is it ok?

And the phone isn't charging when it's off?? I hope it will be ok after charging battery with external charger! Then go to stock bootloader and flash a stock sbf, or if you want to go straight to CM10 try Easy Recovery sbf:
http://forum.xda-developers.com/showthread.php?t=1787541
Sent from my MB525 using xda app-developers app

Done
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)

sterver1 said:
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)
Click to expand...
Click to collapse
Why 2?
Only 1 is enough
Also AICS that is older version of CM7…
Flash froyo and root it...
Install 2ndInit and using cwm install CM10
If you screw up...I am not responsible!
Sent from my MB525 using xda app-developers app

All is ok.... Now I'm using CM10.