heei guys .
half a year before I bought the zte blade, and so far it worked well.
but suddenly it stops working ..
whenever I try my cell phone goes immediately to start the red "back" button on (bright red) and then there's the green robot android, then the blue zte intro and then it all over again ..
I have not changed my zte (clockwork, rom)
I know myself well not so good ..
would be really nice if someone could help me ..
I do not know what to do ..!!!
or is it maybe bricked ?!
thanks ..
Its not bricked as it still boots up.
When exactly does the phone crash - when you make a call, start an app, or just automatically reboots?
Did you install a new app just before this started happening?
Is the phone rooted?
Are you sure the battery is ok? Try starting phone with charger plugged in.
ouh ..
yes when i switch the phone on the android boot logo cames then the (blue) zte intro .. and then the zte intro comes again and again ...
noo ..
aahm ? i dont do anything with the pc and the zte ..
so i think i dont root it or something ..
one time there was "ftm" on the screen (after it had this problem).. but i didnt know what this is ..
thank you in front off !!!
but i didnt came anymore to the homescreen , or lock screen
Try booting into recovery and clear the cache? I remember my old G1 did the same thing, and after clearing the system cache it worked.
To boot into recovery i think you keep hold of volume down when turning the device on.
If that doesn't work you could wipe the device, but you'll loose everything on it then.
Sent from my ZTE BLADE using XDA App
The issue you have is this, the rom that has been flashed to the phone is for Gen 2, but the phone is still set on Gen 1.
You'll need to boot into recovery and perform a restore, or flash Ginger stir Fry Rom, then the phone will work.
sent using tapatalk
Solutions depend on
-- whether or not u have custom recovery installed ,
-- whether or not fastboot is enabled in your device. (It isn't enabled only in stock gen2 firmware)
-- whether or not u have rooted and made changes to system partition.
Possible solutions
-- If u have custom recovery installed then format (= wipe data/factory reset) the device from the recovery.
Power off the device. Then by holding volume down power on the device. This takes u into custom recovery menu if it is installed. If custom recovery isn't installed this takes you to FTM MODE.
-- If u have fastboot enabled then use this method to format ur device. Power off the device. Then hold volume up and power on the device. Here the device should stay at green android logo forever if fastboot is enabled. This is fastboot mode. Now install zte USB drivers in PC and connect phone in fastboot mode to PC. It will install the software. Now in device manager u shouldn't see any android named devices with yellow unrecognised format. Then use fastboot windows tools from command prompt. The command to format tthe device is
fastboot erase userdata
-- if the above processes didn't work then using tpt is recommended way. U can flash complete low level device firmware using tpt. U can flash either a recovery alone to hard reset. Or u can flash a complete rom. On bit searching at modaco u will get more information regarding everything.
Sent from my Blade using XDA App
THANK YOU !!
but i dont understand that things .. ?!
can you explain me your answer for people do not understand much of it ?
Download gen1 to gen2 (there is a download link in this section) http://forum.xda-developers.com/showthread.php?t=1258855
Unzip the file and place the image ( the image is called image, not gen1 to gen2) on the root of your sd card (ideally it is best to do this on a pc)
Also download and place the Rom you wish to use on the root of your SD card (cyanogenMod 7.1.0 stable release works well) http://forum.xda-developers.com/showthread.php?t=1297776
DO NOT UNZIP THE ROM at this stage.
Put the SD card back into the phone.
Power off the phone, hold menu & vol + (up) & power at the same time, you should see some green writing, wait until it is finished (well done your phone is now gen2)
You should now arrive at the clockwork recovery screen, if not power off the phone, then hold vol - (down) and power (together), clockwork will boot.
Now using clockwork recovery, clear data/factory reset, then install your rom from the zip, that is all there is to it, obviously you'll have to enter your login details to use the market and sync your contacts etc, but your phone should now be working.
Don't forget to make a nandroid backup.
Goodluck
sent using tapatalk
THANK YOU VERY VERY VERY MUUCHH !!!!
it works perfect !!!!!!!
thanks ((((
You are very welcome
sent using tapatalk
Related
Hi.
Phone is not bricked, but stuck at a moment of the boot process. Whatever I do, it gets stuck in a loop. It seems that it's a kernel issue. I've tried everything I know to fix this (kdz updater & more than 5 firmwares), unsuccessfully... It happened while flashing with a stock 2.1 firmware from a CM7 M4 ROM.
screenshot:
I think I simply ****ed the phone so it is impossible to solve that now.
Any suggest is welcome.
Fix
IT'S A KERNEL ERROR
READ ALL FIRST!!!
Have the necessary software.
- Phone Drivers
- KDZ_updater
- The Room you want to install (.kdz)
When we light up the phone and leave us this error screen:
1. Pull battery, sim, sdcard out
2. press the power key + the Volume Down key to set the phone into download mode or (Download Mode), and only then plug USB cable... (if its not recognized unplug and plug again)
3. Disable USB LG Driver Model, this will change depending on the operating system we have in the case of windows will be in Manage> Device Manager> Modems> LG USB Drive Model -> Right Click "Disable "
4. Open KDZ_FW select type 3GQCT, Phone Mode: DIAG (if not try with CS_emergency), consider the room to install (File *. kdz).
Veronica
Hey Veronica.
thanks for you attention, but I already tried every possible things at playing with kdz updater. When KDZU send the IParam 215, the phone reboots, and the error keeps happening, whatever the mode used or the firmware version.
just for saying, there is no need to hold the power buton when the battery is out. Just hold V- before pluging the usb cable.
is there a way to "format" all the datas of the phone ?
first off you do no that the only way you could have went back to 2.1 is with clockwork.
have you tried to see if fastboot works if it does flash a custom rom onto it.
Sent from my GT540 using XDA Premium App
Hey eoghan2t7
I have new events. I've just successfully flashed it with the 2.1 open + fb firmware. Now, it is stuck on the android logo (seems to load but keeps looping).
Fb seems to work (performed a reboot with cmd), What should I do now ?
ok go in to fb and run
fastboot -w then try and boot the phone normally.
Sent from my GT540 using XDA Premium App
thank you very much eoghan2t7
Phone started normally. I didn't know that to downgrade the firm it needs to do it by recovery. However, I rightly tried to flash preciesely by recovery (so wihout knowing), then I got an error and it said something like "update aborted, reboting". The kernel error appeared after that, but before I even try a normal boot. Then I directly flashed using KDZU.
So, it is solved. Thanks again.
glad you got it sorted.
Sent from my GT540 using XDA Premium App
always do a full wipe data/factory reset BEFORE and AFTER flash any rom!
Veronica
okay Ill' remember it
phone is stop on idea logo i flash after flash phone is ok but no service problem
i unlock with dc unlocker after unlock same problem any body help
From zte.com.cn I have downloaded the original image.bin file for Idea. But its in home and I am away.
Unfortunately its not available now on zte site.
But yes will try to upload if possible.
Sent from my Idea Blade
Check ur imei no. n verify whether it is as same as given at backside of battery.....
u
Sent from my Desire HD using xda app-developers app
Bumping this thread instead of making a new one.
Just rooted my brothers Blade, and installed CWM 5.0.2.0. Made a NAND backup before starting to flash. I downloaded CyanogenMod 7.1 along with GAPPS as found on this forum, put it on the SD and booted inte CWM. Wiped data, cache and dalvik and flashed CM 7, when i start the phone, I get no service, i can't find any network or anything, I even tried several SIM card.
Then i wiped everything and restored the backup and the service works fine.
Anyone have any idea?
Hassizle said:
Bumping this thread instead of making a new one.
Just rooted my brothers Blade, and installed CWM 5.0.2.0. Made a NAND backup before starting to flash. I downloaded CyanogenMod 7.1 along with GAPPS as found on this forum, put it on the SD and booted inte CWM. Wiped data, cache and dalvik and flashed CM 7, when i start the phone, I get no service, i can't find any network or anything, I even tried several SIM card.
Then i wiped everything and restored the backup and the service works fine.
Anyone have any idea?
Click to expand...
Click to collapse
Swedish phone, eh? Is it the comviq/tele2 version? That's a GEN3 phone, same as mine.
1. Get a fresher version of the ROM, CM-7.2.0 is stable and can be found in the stable download section of Cyanogenmod, here: http://download.cyanogenmod.com/?type=stable&device=blade
2. Download this: http://www.mediafire.com/?f3yukhcn7woh3de (i know it says CM-9 but trust me on this, it works on CM-7 just fine)
3. Flash the ROM and whatever packages you want to include in it, like gapps (pretty much a must have).
4. Flash the file you downloaded in step 2.
5. Reboot.
I've got a GEN3 phone and this is how i make it work.
Jinxxed said:
Swedish phone, eh? Is it the comviq/tele2 version? That's a GEN3 phone, same as mine.
1. Get a fresher version of the ROM, CM-7.2.0 is stable and can be found in the stable download section of Cyanogenmod, here: http://download.cyanogenmod.com/?type=stable&device=blade
2. Download this: http://www.mediafire.com/?f3yukhcn7woh3de (i know it says CM-9 but trust me on this, it works on CM-7 just fine)
3. Flash the ROM and whatever packages you want to include in it, like gapps (pretty much a must have).
4. Flash the file you downloaded in step 2.
5. Reboot.
I've got a GEN3 phone and this is how i make it work.
Click to expand...
Click to collapse
after flash phone blink andriod logo i try to enter downlodeing mode but not enter dm mode
itry to vol+ +power
vol- + power also try to press home + nand power but not enter dowm loding mode plz help any body i realy need help
gauravrajput said:
after flash phone blink andriod logo i try to enter downlodeing mode but not enter dm mode
itry to vol+ +power
vol- + power also try to press home + nand power but not enter dowm loding mode plz help any body i realy need help
Click to expand...
Click to collapse
i think i flash bad flash file so phone brick now i want to repir i see here
http://www.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
how to repir but phone not going dfu mode i try to vol+ . power but phone not going dfu mode i try to repir jtag i write full dump in raw mode but phone is blink andriod logo help help
Hi.. I m using a Motorola Defy XT 535 (rooted). Installed Audio beat installer, it asked for a reboot and after that... its going on a continious boot loop..
Tried going to the recovery mode using the volume+ - and power on button.. but it stops at a screen with an exclamation surrounded by a white triangle and the android robot at the button.. can some1 help me with this.. plz?
Thanks
I do not own this device but Hold volume + & - and you'll see wipe menu or if it doesn't work tap bottom right corner
Sent from my MB526 using xda premium
Thanks that worked..
i m into the android system recovery.. I have the sbf for my mobile.. can anyone guide me through the flashing process...
I m a noob in this.. and I know nothing abt this
Thnx
toss87 said:
Thanks that worked..
i m into the android system recovery.. I have the sbf for my mobile.. can anyone guide me through the flashing process...
I m a noob in this.. and I know nothing abt this
Thnx
Click to expand...
Click to collapse
Refer this thread. Should help
http://forum.xda-developers.com/showthread.php?t=1827338&highlight=xt+535
I'm having this issue too
Just last night I FINALLY rooted my phone. An hour or so later, I installed Beats Audio Installer Root v.2.3.2.1 AdFree_Released by HPR.apk. I had already done Titanium Backup before trying to install this. I ok'd the reboot, and have been watching a bootloop ever since. I can go into recovery, and bootloader. I have already tried to wipe cache, and a factory reset...with no luck. I don't know how to get to my backup I made, and I'm out of ideas.
mamalovebug14 said:
Just last night I FINALLY rooted my phone. An hour or so later, I installed Beats Audio Installer Root v.2.3.2.1 AdFree_Released by HPR.apk. I had already done Titanium Backup before trying to install this. I ok'd the reboot, and have been watching a bootloop ever since. I can go into recovery, and bootloader. I have already tried to wipe cache, and a factory reset...with no luck. I don't know how to get to my backup I made, and I'm out of ideas.
Click to expand...
Click to collapse
go to recovery mode and wipe data... nor the best to cleanup with flashing one more time with the fresh room.
This beats Audio Installer seems a spam application, mine using Player Pro for a nice and clear audio player.
Try this link for custom room : http://forum.xda-developers.com/showthread.php?t=2249892
(press THANKS if I do help you :good: )
How to unbrick Motorola Defy XT535
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you
The phone was working fine until recently it started rebooting automatically ever 2-3 hours...I didn't do anything about it and now it boot loops at startup
It's different from other problems as phone boot loops in download or recovery mode so i can't flash a new ROM or a official ROM. Phone is rooted and out of warranty so I'm not sure if i can give to the samsung service centre.
This may sound stupid but i think maybe the power button has been pushed a little deep and hence the phone reboots continously...but not sure of this...any way of removing it and inserting it back..
Or my phone is just bricked
Sorry if repost i tried searching but no results came with our phone
Flash fresh stock ROM via odin. For instructions and your firmware pack go here: http://forum.xda-developers.com/showthread.php?t=1465800
Then root your phone and reflash your ROM, Kernel bla bla bla.
There is no possiblity that a phone will boot loop in download mode..
U sure u in download mode.??
That is power+ vol DOWN + menu button.?
** rooting is new for me,
nd i am a noob to root....**
menewtoroot said:
There is no possiblity that a phone will boot loop in download mode..
U sure u in download mode.??
That is power+ vol DOWN + menu button.?
** rooting is new for me,
nd i am a noob to root....**
Click to expand...
Click to collapse
yep i go in download mode and i press the up button (it takes few sconds for it to reboot). After this, screen goes black....
If i dont press any button..same thing happens...
@Uchooseme...i can't flash anything..as i cant remain in download mode...
I removed the battery and sdcard from the phone last night, and kept it that way.
In the morning when i booted the phone it stuck at "galaxy y" screen(no boot loop)[I had to press power button].
so i went in download mode and this time it worked(meaning no black screen)
then i went to recovery mode and did default wipe and cache wipe..rebooted the phone again..
while rebooting it showed something like this
"...log_files_...cant find dbRbooting\..." [...] something was wriiten but i could only glance the screen for few secs so couldn't make out what was written
-After this i thought maybe i should insert sdcard and then boot the phone.So i inserted the sdcard and booted.
-There it was again the boot loop. I didnt even press power button,the phone started as soon as battery was inserted
-The phone started and then restarted.(from galaxy y screen to black screen and back again to galaxy y..goes on like this)
-when it restarts (i.e. from galaxy y screen to black screen) i went to recovery mode but as soon i select wipe cache, it restarted again.
-Then to download mode..as soon as i tried pressing UP button...black screen(don't rember if it restarted atuo or i had to press power button but definitely the "downloading..." screen didnt appear)
I again removed the battery n sdcard (this time for 5 mins around)
-Again the phone stuck at logo screen (this time when i inserted the batery the phone didnt start automatically but i had to press power button)
-Without inserting the sdcard i went to download mode and flashed >>> S5360_DDLF2_ODDLF1_DDLF1_wipe_by_SplitFUS2 (the file i had used earlier while installing ussr i guess)
-This time it went thorugh the logo screen and the "samsung animation" came.....but the it rebooted again..went like this 3-4 times and went off
- now when i start it,it automatically goes to recovery mode and shuts off (doesnt restart)
[Only thing i can see here apart from the recovery options is ----applying Multi CSC----
Copied the default wallpaper file](in blue color and the bottom)
b2bt said:
yep i go in download mode and i press the up button (it takes few sconds for it to reboot). After this, screen goes black....
If i dont press any button..same thing happens...
@Uchooseme...i can't flash anything..as i cant remain in download mode...
Click to expand...
Click to collapse
once try this
take out battery and sim card
connect ur phone to computer.
now press vol down+ menu+power button to go to download mode
and if it stays there flash stock rom.
Google how to force galaxy y into download mode...
Try any one of them...
As soon as u get in download mode..
Flash stock rom via odin
** rooting is new for me,
nd i am a noob to root....**
U can try using usb jig
ROM EVOLUTION X3
KERNEL HELL FUSION
ALINS JB THEME + EVOLUTION S3 STATUS BAR.
If non of thses worked... then take ur device to samsung center... they'll wipe everything on device and reinstall everything as new... but ull have to spnd some Money... :thumbup::thumbup:
removing the battery and everything worked...thanks KnightlyNinja but i dont think problem is solved...i had to wipe n restart the phone several times and the phone still starts automatically as i put in the battery
current what i do is put in download mode..selec three files in odin included in >> S5360_DDLF2_ODDLF1_DDLF1_wipe_by_SplitFUS2 and flash..after that i wipe everything..
is there something i should do
btw now I'm thinking of trying to flash this > S5360_DDLK2_ODDLK1_DDLK1_wipe_by_SplitFUS2.zip
its fine right?
b2bt said:
removing the battery and everything worked...thanks KnightlyNinja but i dont think problem is solved...i had to wipe n restart the phone several times and the phone still starts automatically as i put in the battery
current what i do is put in download mode..selec three files in odin included in >> S5360_DDLF2_ODDLF1_DDLF1_wipe_by_SplitFUS2 and flash..after that i wipe everything..
is there something i should do
btw now I'm thinking of trying to flash this > S5360_DDLK2_ODDLK1_DDLK1_wipe_by_SplitFUS2.zip
its fine right?
Click to expand...
Click to collapse
What's your sdcatd i mean what class and how much is storage
Sent from my S100 using xda premium
USSR v9....
I think u got boot loop because u tried installing custom kernel....
You had to first delete scripts in init.d.....
Sent from my GT-S5360 using xda app-developers app
KnightlyNinja said:
hello sir i am a fan of your works like the knightly xperia for hyperionV8 but i ave a question sir. .their is a time i installed the DEODEX DXLF via recovery mode (the normal recovery mode)and it installed and i rebooted my phone. .but after rebooting my phone went bootloop. .how can i fix this without odin?pls help me sir and tnx in advance
Click to expand...
Click to collapse
I was trying to flash a custom ROM in my Lenovo A6000. I rooted the phone with KingRoot. Then using Rashr I flashed the twrp img. I went to recovery and then I made a backup using TWRP's Backup option. I rebooted the phone and again went to recovery Then tapping the Wipe option I went toAdvanced Wipe where I checked the boxes next to Data, System, Cache, Dalvik. After that I went to the Install option where I chose the ROM.zip file from the sd card. The installation failed, I tried to install again but it failed again ( I must have had a bad copy of the file ). Since I had already wiped the system I went to the Restore option, chose the backed up file to restore. The restore was successful. But when I tapped the Reboot button after a couple of seconds the device screen went off and the phone kept on vibrating continuously after short intervals. I tried pressing the POWER button for a long time--> keeps on vibrating. I tried going to recovery by pressing the hardware keys--> still keeps on vibrating. I tried connecting to the computer after taking out the battery and replacing it. NOthing seems to work. It keeps showing the same problem. Please Help...
There is nothing to do with it anymore. Get it back to the customer care center.
Droidkit said:
There is nothing to do with it anymore. Get it back to the customer care center.
Click to expand...
Click to collapse
Will they repair it?
Sent from my Micromax Q380 using XDA-Developers mobile app
Abhishek Hamal said:
Will they repair it?
Sent from my Micromax Q380 using XDA-Developers mobile app
Click to expand...
Click to collapse
They will.
No need to go to customer care.
Power off the phone .
Press vol down and power button and it will boot into boot loader
Connect the USB cable .
Go to ed300's post and download the tarp recovery for lollipop and KitKat.
If the base ROM on which u have flashed the new ROM was KitKat use the KitKat twrp.
Else use the lollipop twrp.
Extract the required zip file.
After connecting the USB after that click on the file named Flash . after its completed click on Boot file .after that's also done again click the Flash file .
After that it will show (waiting for device )
And the phone will boot to the recovery mode and u can flash the ED300's ROM I prefer CM12.1
Good luck.
I have hard bricked my Lenovo A6000 Plus, no fastboot, no recovery, not detected by pc either, just phone is vibrating continuously after pressing the power button. I have seen some tutorials of other Phone brands of how to test point their motherboards, Plz help me to give command or test pin my motherboard chipset as well, I don't know where it is located exactly. Thanks.