Database Users

[Q] [q] heelp mee pleaase !!

heei guys .
half a year before I bought the zte blade, and so far it worked well.
but suddenly it stops working ..
whenever I try my cell phone goes immediately to start the red "back" button on (bright red) and then there's the green robot android, then the blue zte intro and then it all over again ..
I have not changed my zte (clockwork, rom)
I know myself well not so good ..
would be really nice if someone could help me ..
I do not know what to do ..!!!
or is it maybe bricked ?!
thanks ..

Its not bricked as it still boots up.
When exactly does the phone crash - when you make a call, start an app, or just automatically reboots?
Did you install a new app just before this started happening?
Is the phone rooted?
Are you sure the battery is ok? Try starting phone with charger plugged in.

ouh ..
yes when i switch the phone on the android boot logo cames then the (blue) zte intro .. and then the zte intro comes again and again ...
noo ..
aahm ? i dont do anything with the pc and the zte ..
so i think i dont root it or something ..
one time there was "ftm" on the screen (after it had this problem).. but i didnt know what this is ..
thank you in front off !!!

but i didnt came anymore to the homescreen , or lock screen

Try booting into recovery and clear the cache? I remember my old G1 did the same thing, and after clearing the system cache it worked.
To boot into recovery i think you keep hold of volume down when turning the device on.
If that doesn't work you could wipe the device, but you'll loose everything on it then.
Sent from my ZTE BLADE using XDA App

The issue you have is this, the rom that has been flashed to the phone is for Gen 2, but the phone is still set on Gen 1.
You'll need to boot into recovery and perform a restore, or flash Ginger stir Fry Rom, then the phone will work.
sent using tapatalk

Solutions depend on
-- whether or not u have custom recovery installed ,
-- whether or not fastboot is enabled in your device. (It isn't enabled only in stock gen2 firmware)
-- whether or not u have rooted and made changes to system partition.
Possible solutions
-- If u have custom recovery installed then format (= wipe data/factory reset) the device from the recovery.
Power off the device. Then by holding volume down power on the device. This takes u into custom recovery menu if it is installed. If custom recovery isn't installed this takes you to FTM MODE.
-- If u have fastboot enabled then use this method to format ur device. Power off the device. Then hold volume up and power on the device. Here the device should stay at green android logo forever if fastboot is enabled. This is fastboot mode. Now install zte USB drivers in PC and connect phone in fastboot mode to PC. It will install the software. Now in device manager u shouldn't see any android named devices with yellow unrecognised format. Then use fastboot windows tools from command prompt. The command to format tthe device is
fastboot erase userdata
-- if the above processes didn't work then using tpt is recommended way. U can flash complete low level device firmware using tpt. U can flash either a recovery alone to hard reset. Or u can flash a complete rom. On bit searching at modaco u will get more information regarding everything.
Sent from my Blade using XDA App

THANK YOU !!
but i dont understand that things .. ?!
can you explain me your answer for people do not understand much of it ?

Download gen1 to gen2 (there is a download link in this section) http://forum.xda-developers.com/showthread.php?t=1258855
Unzip the file and place the image ( the image is called image, not gen1 to gen2) on the root of your sd card (ideally it is best to do this on a pc)
Also download and place the Rom you wish to use on the root of your SD card (cyanogenMod 7.1.0 stable release works well) http://forum.xda-developers.com/showthread.php?t=1297776
DO NOT UNZIP THE ROM at this stage.
Put the SD card back into the phone.
Power off the phone, hold menu & vol + (up) & power at the same time, you should see some green writing, wait until it is finished (well done your phone is now gen2)
You should now arrive at the clockwork recovery screen, if not power off the phone, then hold vol - (down) and power (together), clockwork will boot.
Now using clockwork recovery, clear data/factory reset, then install your rom from the zip, that is all there is to it, obviously you'll have to enter your login details to use the market and sync your contacts etc, but your phone should now be working.
Don't forget to make a nandroid backup.
Goodluck
sent using tapatalk

THANK YOU VERY VERY VERY MUUCHH !!!!
it works perfect !!!!!!!
thanks ((((

You are very welcome
sent using tapatalk

DHD got bricked

I had Revolution HD rom or something like that don't remember it't long time it worked. One morning I woke up and my phone didn't respone. Yesterday everything worked..When i tried to boot current rom it stuck on HTC screen..Okay so I decided to flash new rom because recovery still work but I probably lost my root because it can't delete previous rom..Today after long time I decide to ask you what to do. When I tried update new version of rom today it looked like everything it's fine but is stuck on HTC logo or restarts over and over again..
Sorry for bad eng..

DO you want help?I can help u if u only want it

Go into the recovery, wipe/format everything and flash a new ROM. Wipe is needed!

Sleekykenny: Of course i want
I wiped everything but it writes error when I wipe system.

I also flashed new rom and and got message saying successful, but when i reboot my dhd it just stay vendors screen which is 3mobile. But if i remove the battery i can get hboot menu. i also can get into clockworld recoveryand flash rom and wipe data etc. can anyone help or is my phone bricked.

Same problem

Guys I'm not an expert in this, but when you flash a new ROM it takes time to load. Maybe you just didn't wait enough.

markslo112 said:
Guys I'm not an expert in this, but when you flash a new ROM it takes time to load. Maybe you just didn't wait enough.
Click to expand...
Click to collapse
You're right. When intalling a new ROM, the first boot is longer because the new one is building a new Dalvik cache and so on... depending of the release.
Be patient a bit more, then report ...

http://www.multiupload.com/AURLLESU5V
1. Download this file
2. Do not unzip this file
3. Store it on SDCARD
4. Power off your device
5. Keep press Vol-Down
6. Do not releas the vol down an press power on
7. Follow the instruction on the screen
8. Enjoy and be patient for 5 minutes
;-)
Sent from my HTC Desire HD A9191 using XDA App

After 1 hour waiting I decided to put battery out because it have no point

rostuli said:
.....When I tried update new version of rom today it looked like everything it's fine but is stuck on HTC logo or restarts over and over again..
Sorry for bad eng..
Click to expand...
Click to collapse
markslo112 said:
Go into the recovery, wipe/format everything and flash a new ROM. Wipe is needed!
Click to expand...
Click to collapse
jabs40 said:
I also flashed new rom and and got message saying successful, but when i reboot my dhd it just stay vendors screen which is 3mobile. But if i remove the battery i can get hboot menu. i also can get into clockworld recoveryand flash rom and wipe data etc. can anyone help or is my phone bricked.
Click to expand...
Click to collapse
rostuli said:
Same problem
Click to expand...
Click to collapse
if you can get into your phone into hboot/recovery/fastboot then your phone is not a brick!
the problems with white htc screen is called a bootloop. like the user above suggested use a full wipe. easiest way is connect phone to PC and go into fastboot from your options when in the bootloader
type in fastboot erase system -w this will erase all system and userdata
then disconnect phone from PC when that is complete and navigate to your recovery option. select the recovery option and then mount back to USB cable and select USB toggle option so you can data transfer to SD card.
put new rom you wish to use or redownload one you wanted. then try again

It's actually a splash loop, a boot loop is the boot animation. But you get the idea
Sent from my HTC Desire HD using xda premium

the only option i get when i get into fastboot from the phone is bootloader,reboot,reboot bootloader and power down. if i chose any of the above then they all go back Hboot menu. cannot get into menu to type in fastboot erase sytem -w. can u advise me on where is the menu?. or i'm i doing something wrong..
thanks.

rostuli said:
After 1 hour waiting I decided to put battery out because it have no point
Click to expand...
Click to collapse
I don't understand where u was waiting.
Can you describe what was happening?
Are you able to access the bootloader??

1. Pull out battery
2. Put in battery
3. Hold power + Volume Down buttons until inside bootloader UI
4. Use volume keys to navigate to the "Recovery" option then press the power key.
5. Once recovery has booted, use volume keys to navigate to the "Factory reset & wipe data" option, then press power key.
6. Reboot.
Results?

Had the same problem in the past.
I downloaded an RUU and managed to get my phone to boot normally.
Take a look on this:
http://forum.xda-developers.com/showthread.php?t=982783

Download RUU is a good idea I tried it, didn't work..In that post he said some asian worked but I can't get one anywhere.
I used the Asia_WWE_1.32.707
Click to expand...
Click to collapse
like the user above suggested use a full wipe. easiest way is connect phone to PC and go into fastboot from your options when in the bootloader
type in fastboot erase system -w this will erase all system and userdata
Click to expand...
Click to collapse
Got part with fastboot but where am I supposed to write -w? I'm not that good in this that is why I ask here for help. But thanx anyway. And I tried wipe everything using recovery and when I wipe system writes error all the time.

I also tried all the above method but to no avail. Then a friend of mine bought the dhd so i made a goldcard from his phone loaded a pd98img.zip and flashed.. my dhd is back in action... i think this is your only solution, find somebody with the same phone. If u cant let me no i'll send you a gold card.

If it could help me than upload it somewhere And tell me how to use it. I heard about it but not sure.

You can remove your sd card then you will be able to choose the recovery option instead of it constantly going to hboot. The hboot looks for a file and asks you to instal or not install and then tells you to power of. Remove you sd card and you wont get this option so you can go into recovery and reflash a rom (you can re insert your sd card once in recovery and chose the mount option)

Please help!!! Phone stuck on bootscreen,no recovery,download

I have been using Darkyy's resurrection 9.2 for over a year now. Uptil now I had never faced any problem. Today in the morning it was working fine. Then, my phone started running really slow so I decided to reboot. Ever since then, its been stuck on the bootscreen showing Darky's rom. I had not tried anything, no flashing, no installation, nothing.
The worst part is I have tried the 3 button combo many times, but it doesnt seem to be working. I know it used to work for me previously.
I am really in a spot and desperately need help. Any suggestion will be appreciated. Thanks.

sidh10 said:
I have been using Darkyy's resurrection 9.2 for over a year now. Uptil now I had never faced any problem. Today in the morning it was working fine. Then, my phone started running really slow so I decided to reboot. Ever since then, its been stuck on the bootscreen showing Darky's rom. I had not tried anything, no flashing, no installation, nothing.
The worst part is I have tried the 3 button combo many times, but it doesnt seem to be working. I know it used to work for me previously.
I am really in a spot and desperately need help. Any suggestion will be appreciated. Thanks.
Click to expand...
Click to collapse
you mean recovery and download mode doesn't work? did you also try to remove battery then do the 3 button combo? usually if recovery doesn't work, go download mode. then flash a JV(*) with odin3. repartition ticked and put the code, modem, csc. then flash a kernel again.

cant get into recovery or download. tried the 3 button combo about 50 times. and yea, i tried removing the battery for 5 mins and then doing it..

sidh10 said:
cant get into recovery or download. tried the 3 button combo about 50 times. and yea, i tried removing the battery for 5 mins and then doing it..
Click to expand...
Click to collapse
oh, maybe the battery was empty? or did you try charging it while the phone is turned off? what happens if it's charged?

Use your jig to put it into download mode. Simple as pie
Sent from my Captivate running ICS 4.0

i charged it. while off. it charges normally. and the same thing happens when its charged.
edit: GOT DOWNLOAD MODE WORKING! what to do now?

scottcwhite said:
Use your jig to put it into download mode. Simple as pie
Sent from my Captivate running ICS 4.0
Click to expand...
Click to collapse
got download mode on.
now should i flash to stock or what? do i have to disable the voodoo lagfix using recovery first?
i am a complete noob.. please help me out. thanks.

sidh10 said:
got download mode on.
now should i flash to stock or what? do i have to disable the voodoo lagfix using recovery first?
i am a complete noob.. please help me out. thanks.
Click to expand...
Click to collapse
I9000XXJVU_I9000OXAJVU_OXA this and then a kernel
then intall a stock rom. then if you want to go miui/cm go.

sidh10 said:
got download mode on.
now should i flash to stock or what? do i have to disable the voodoo lagfix using recovery first?
i am a complete noob.. please help me out. thanks.
Click to expand...
Click to collapse
I know how frustrating problems can be as I soft bricked mine two days ago attempting to do a Nand restore back my last GB rom from CWM and then spent four hours trying to get my PC to see my phone so I could use ODIN. Here's my method that worked flawlessly for me.
1. Turn phone off and use your jig to put into download mode (get one if you don't have one. Best $10 I ever spent at MobilTechVideos)
2. Open Odin and install 897uckf1 bootloaders package found here http://www.team-continuum.net/home/index.php?PHPSESSID=c26a6e49ab5ddf7a30746954d7db0ccf&topic=17.0
3. When done, remove battery and put back in and then put back into download mode
4. Flash TalonDev Kernel (also provided in above link )
5. when done reboot phone. You will now be stock/rooted GB with CWM. Turn phone off
6. Reboot into recovery (vol up then power button, release power soon as you see the GT-I9000 screen and keep vol up held down till you see orange CWM
7. Wipe Cach/Dalvik/Data factory reset. Flash ICS RC2.11
8. reboot. You should be stuck in the boot mode now (rainbow boot animation). pull battery and reboot into recovery.
9. Flash ICS RC2.11 again no wiping
10. Select advance then "reboot recovery" If it does reboot CWM pull battery and use button combo
11. Flash Nush 3180
12. Reboot. You should now have working RC2.11
13. Reboot into recovery
14. Flash RC3. No wipe. Kernel will be overwritten with Platypus Kernel
15. Reboot and you should be good to go with RC3
I'm sure there are plenty of other methods but this is what always works for when all else fails.
If you follow the above to the letter you will be good to go and running ICS greatness
Sent from my Captivate running ICS 4.0

Thanks!
Thanks for all your help. My phone is working again.
I just flashed darky's resurrection rom 10.2.

I recommend flashing either a newer rooted stock ROM such as jvt or jvu or a more recent custom ROM based on one of the newer firmwares. Darky is a bit last year now.
Sent from my Nexus S using Tapatalk

Because I feel benevolent for those that can not read the ENTIRE thread and I hate for people to not enjoy this awesome ROM. This is not the only way or easiest way but I can guarantee that the below method work every time all the time. Follow the below to a tee and this ROM will be on your phone and working.
scottcwhite said:
I know how frustrating problems can be as I soft bricked mine two days ago attempting to do a Nand restore back my last GB rom from CWM and then spent four hours trying to get my PC to see my phone so I could use ODIN. Here's my method that worked flawlessly for me.
1. Turn phone off and use your jig to put into download mode (get one if you don't have one. Best $10 I ever spent at MobilTechVideos) If no jig use button combo.
2. Open Odin and install 897uckf1 bootloaders package found here http://www.team-continuum.net/home/index.php?PHPSESSID=c26a6e49ab5ddf7a30746954d7db0ccf&topic=17.0
3. When done, remove battery and put back in and then put back into download mode
4. Flash TalonDev Kernel (also provided in above link )
5. when done reboot phone. You will now be stock/rooted GB with CWM. Turn phone off
6. Reboot into recovery (vol up then power button, release power soon as you see the GT-I9000 screen and keep vol up held down till you see orange CWM
7. Wipe Cach/Dalvik/Data factory reset. Flash ICS RC2.11
8. reboot. You should be stuck in the boot mode now (rainbow boot animation). pull battery and reboot into recovery.
9. Flash ICS RC2.11 again no wiping
10. Select advance then "reboot recovery" If it does reboot CWM pull battery and use button combo
11. Flash Nush 3180
12. Reboot. You should now have working RC2.11
13. Reboot into recovery
14. Flash RC3. No wipe. Kernel will be overwritten with Platypus Kernel
15. Reboot and you should be good to go with RC3
I'm sure there are plenty of other methods but this is what always works for when all else fails.
If you follow the above to the letter you will be good to go and running ICS greatness
Sent from my Captivate running ICS 4.0
Click to expand...
Click to collapse

[Solved] bricked defy Step by Step Walkthrough

Original message
:I need some serious help.
I tryed to flash custom 2.3.6 fixed sbf.
which didnt end well, after powerup i would go straight to bootloader with err codes.
so tryed to flash another stock SBF, that ended me in inifinte bootloop with android logo. after 20 minutes in bootloop i gave up and flashed another stock SBF this time it was cellcom israel sbf, it finished the flashing succesfully but now the phone wont powerup at all. not bootloader not recovey.
nada...
I really need your help here, any kind of insights will help. please this is urgent.
BTW: this is a red lense defy, last rom was JB 4.1.1 quarx 30.07 build.
the sbf was supposed to have the same rom.
update 1: managed to finally flash stock, cant enable 3g. phone is still rooted, installing superuser is succesfuly but doesnt control attributes. so 2ndinit currently does not work,
issue solved
Click to expand...
Click to collapse
UPDATE 16/11/2012: links check and updated everything should work.
Solution:
1. first get these files as we'll need all of them: Rsd lite (download and install that),
Motorola drivers (download and install: Here)
JORDN_U3_97.21.51.rar(contains sbf file): http://www.4shared.com/get/xzT3dMXv/JORDN_U3_972151.html
firmware.rar(contains another sbf file): http://www.4shared.com/rar/Ytt5O6--/firmware.html
2ndinit 1.4.2, and 2ndinit 2.3 (can be found here: http://forum.xda-developers.com/showthread.php?t=1032212).
also need the nandroid backup: http://www.4shared.com/file/pVQfB4bF/2011-06-11141427.html
[Optional]
superuser.zip file installing from recovery: http://downloads.androidsu.com/superuser/Superuser-3.2-arm-signed.zip
2. [Optional] I didn't have a router at my house and no signal at my phone and i needed internet for 2ndinit, so i installed a program that turns my wifi on the computer into a hotspot, it can be found here: http://www.connectify.me/
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
5. after installing Rsd lite, launch it, extract the JORDN_U3_97.21.51.rar and firmware.rar files into root directory (C:\ or D:\ or whatever).
in rsdlite press the
...
Click to expand...
Click to collapse
button and choose the JORDN_U3_97.21.51.sbf file.
connect your phone via a usb cable to your computer, the phone should state its connected. and you should see on the rsdlite window that a device is connected, click on it and press the button :"start".
let it finish and boot on itself (it should do that).
6. [Optional] if you started with low battery now is a good time to charge your phone.
7. transfer the 2ndinit 1.4.2 apk and the 2ndinit 2.3 apk into a folder in your sd card (name it "A" for ease of use).
also extract the 2011-06-11.14.14.27.zip into this folder on your sd card "/clockworkmod/backup/"
8. extract the superoneclick on your computer and launch it, while the phone is connected (should also be in usb debugging mode), press the root button in the superoneclick window and watch the magic, make sure you also install busybox (should be installed automatically when pressing the ROOT button).
9. disconnect your phone, use the file explorer provided with this rom and make sure you check with a "V" to "allow 3rd party apps" in the settings. install the 2ndinit1.4.2.apk file.
open the app after installation and make sure you have internet connectivity, press the install bootmenu option.(now pop-ups should appear regarding permissions, choose "allow" for all of them).
after the green led has turned on, go to settings menu under application/development and turn off the "usb debugging mode".
10. restart your phone and make sure you press the vol down button when the led turns blue during the bootup.
when in bootmenu, choose recovery-> custom recovery.
when in recovery, choose "wipe data/factory reset", "wipe cache", "advanced-> wipe dalvik".
now return to recovery menu and choose "backup/restore"->"restore->2011-06-11.14.14.27".
this should take a couple of minutes.
when its done, go back again to recovery menu, and choose again "wipe cache", "advanced-> wipe dalvik".
power off the phone.
11. hold the vol up button once again and power up the phone to go into bootloader screen.
connect your phone once again to your computer and on the rsdlite window choose the "firmware.sbf" file.
press start and flash it.
12. let the phone boot up, congrats you just revived your phone, root it once again using super one click (if needed), install the 2ndinit2.3.apk.
transfer whatever rom you like (dont try sbf's cause that's how I first got in this mess), reboot phone, go into stock recovery and install that zip after wiping data/factory reset. and ohh well you know the rest.
Good luck.
P.S if you can't or dont know where to find the files take a quick search in the forums and youll find most of them.

Reserved

reserved

when i flash firmware.sbs it takes me back to Android Bootmenu when it reboots please help. thanks

Shouldnt happen, make sure you Wipe Data, and cache, before the nandroid backup and after the nandroid backup.
only then u can flash the firmware.sbf
if the bootmenu still comes up simply choose "Boot-> set default-> normal". and reboot.
if still comes back to bootmenu (and i hope you are talking about bootmenu and not bootloader). install through custom recovery your favorite ROM and don't forget the corresponding Kernel.
good luck!

Is that work with bl7 ???

I've been trying to restore my phone for weeks, up until this thread, I started to think the internet couldn't help me. You are a god amongst men.

OK, banging my head against a wall here; I have 2 defy's. Mine has been to a war zone 4 times, I've replaced the screen (and the waterproof gasket) once, It's broken (the case) but still works except for the fact that the last time I had to flash an sbf I messed up the charging ability with the "macguyver" method.
Now I recently got a pristine looking red lens defy from a friend who said it wasn't booting...It "tried" but never stayed booted long. I tried immediately flashing one of the fixed sbf's with CM10 on it, and ever since I get the bootloader 09.10 code corrupt message.
I've tried the method listed here (by the way the first firmware in OP won't download for me, something about violating some terms of agreement?) the one labeled simply "firmware" downloaded.
Still no joy. Every flash I get all the way through code group 32 checksums match. Everything after that fails. Have tried multiple CEE, Nordic, Chinese, even Defy+ sbf (the new defy has red lens) with no luck.
Likewise when I tried flashing via linux (sbf_flash). The other night after battery out for quite awhile it led me to believe it had started working, and allowed me to get into recovery and wipe everything, but it was all false hope. It still did not boot (motorola M boot loop) and likewise, it still did not flash.
Anyone have any ideas how I can proceed to fix this thing?
I thought I had this thing figured out but obviously I was mistaken.
thanks in advance

I just unbricked my phone again yesterday after trying the latest cm10 sbf with no luck, so i can guarantee this method still works, however the firmware.sbf file is really needed and also the nandroid backup, so here's what i'll do:
1. i'll check what links are broken and reupload the necassery files.
2. I'll clean the the first message and update the links
so check back in about an hour

Thanks a lot for posting this. Tried to restore my phone using lot of other posts since the last 3 to 4 days days, but all in vain.
Was anybody able to install CM10 over this? After the installation, the phone is going into boot loop.

Thanks rtk217 for starting this guide very useful for noobs...
I've made some video tutorials using a few of the guides in the forums here...
hope it helps someone...
Its a complete step by step.
Part 1 of 4. This part deals with preparation of all the required files to successfully complete the custom rom installation.
http://youtu.be/jMAlys2_KG4
Part 2 of 4. How to restore Defy to default
http://youtu.be/6SUysKZ2E5Y
Part 3 of 4. How to root using SuperOneClick and install clockworkmod.
http://youtu.be/hd3_SRbkUWw
Part 4 of 4. How to install 2ndinit recovery and install CyanogenMod 10 Jelly Bean 4.1.2
http://youtu.be/gNPacGesWOI

I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?

k.manojraja said:
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Have you got a Defy or Defy+ as you are trying to install the cm10 zip for MB526 (Defy+)

I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526

k.manojraja said:
...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Why are you using 2ndInit 2.3???
All the guides and FAQs will tell you to use 2ndInit 1.4.2

hey i have the same problem did you fix it?
k.manojraja said:
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
Click to expand...
Click to collapse
hey i have the same problem did you fix it?

Thanks ...
Hay, Ur are a genie to me.. I tried so many mods after my imei no is gone. Wifi not working, issues with signal catching.. Now with your step by step guide i was able to overcome all of those... Thank you very much.

cmcooper123 said:
hey i have the same problem did you fix it?
Click to expand...
Click to collapse
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...

k.manojraja said:
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
Click to expand...
Click to collapse
but if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
cmcooper123 said:
but if i flash defy plus firmware on a defy mb525 wont that brick it?
Click to expand...
Click to collapse
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH

cmcooper123 said:
bwithut if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
Click to expand...
Click to collapse
I am really not sure if you have read the posts properly. I had no problems in flashing the defy plus sbf. The defy plus sbf that I gave you was a bl6 version and you can never downgrade to froyo.
97.21.51 is a Chinese éclair with bl5. 2nd boot builds were not working on bl5.

[Q] ideos x5 recover from pink screen HELP!!!!!!!

I am so confused .
Im very new to messing around with phones... yes you can call me a super super NOOB
my phone was already rooted and was running a
miui rom (Elite.ROM.v9.7.FIXED.with.Galnet.by.TerraMino_2012-02-18)
(oxygen2.2.2-u8800-test-110914)
i wanted to change it and tried to update CWM coz it was running an older version something like 5.0.---
i installed the file b518 and when i restarted my phone the phone got stuck in a boot loop.....
I can not access CWM
my phone does not come on and is in a boot loop
the only thing i can access now is the pink screen which i can view the image folder
Before this i had made a copy of my whole SD card on the computer...
so if n e files are required i can access it.
I have the zip files that are listed above
PLEASE HELP ME .....[/I][/B]

First, check if you have a normal U8800, not -51 nor Pro.. You can check it by removing the battery.. And, the files you had on sdcard wont help you :/
You can also try to flash another official rom...
EDIT: what happens when you try to enter recovery?

hmm..try it:
go to in pinkscreen, connect phone to pc via usb and replace recovery to custom; boot in recovery (power+vol.up), wipe all (data/factory reset) and try to boot phone.. or install another rom in recovery

TheJoker0 said:
First, check if you have a normal U8800, not -51 nor Pro.. You can check it by removing the battery.. And, the files you had on sdcard wont help you :/
You can also try to flash another official rom...
EDIT: what happens when you try to enter recovery?
Click to expand...
Click to collapse
ok i just checked and i have the normal u8800
I think i messed up the phone even more.
i got it to stock and upgraded the CWM to 5.5.0.4 i think the new'st version .
I got that done and then tried upgrading it to aurora 5.0
I copied the file on to the sd card and installed it thru recovery . it said sucessfuly installed but when i rebooted my phone the huawei logo comes up and then a blank screen would remain.
I could access the CWM and i tried to factory reset and wipe out all the data, and after i did and rebooted the phone boots into a blue screen.
when i try to get into the recovery mode by pressing vol up+ power button i still get the blue screen
when i press vol up+ vol down +power butten it goes into a pink screen but i cant access the image folder.
I cant access any of the memory's on the computer.
I tried hooking it up to ubuntu to see if the drives pop up, but still no luck.
as of now im in a fix i dont know what to do coz recovery mode is not opening up and only a blue screen is coming and no reaction on the computer.
PLEASE HELP IM GOING A LIL INSANE>>>>

sudhodhan said:
ok i just checked and i have the normal u8800
I think i messed up the phone even more.
i got it to stock and upgraded the CWM to 5.5.0.4 i think the new'st version .
I got that done and then tried upgrading it to aurora 5.0
I copied the file on to the sd card and installed it thru recovery . it said sucessfuly installed but when i rebooted my phone the huawei logo comes up and then a blank screen would remain.
I could access the CWM and i tried to factory reset and wipe out all the data, and after i did and rebooted the phone boots into a blue screen.
when i try to get into the recovery mode by pressing vol up+ power button i still get the blue screen
when i press vol up+ vol down +power butten it goes into a pink screen but i cant access the image folder.
I cant access any of the memory's on the computer.
I tried hooking it up to ubuntu to see if the drives pop up, but still no luck.
as of now im in a fix i dont know what to do coz recovery mode is not opening up and only a blue screen is coming and no reaction on the computer.
PLEASE HELP IM GOING A LIL INSANE>>>>
Click to expand...
Click to collapse
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...

sudhodhan said:
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
Click to expand...
Click to collapse
some one please help me​

sudhodhan said:
hey my only access into the phone now is through odin
Im able to connect the phone and odin is detecting it... but i dont know where do get the
PIT FILE, Boot loader, Phone, CSC fils from... please guide me on where i can download those files from
im guessing thats my only way to getting my phone back to life...
Thank you...
Click to expand...
Click to collapse
DON'T USE odin and other flash tools for our phone. It will full brick your phone.
Did you re-flash B518?
If you did,connect Phone while in Blue (or Pink) screen on Ubuntu. Open the disk manager tool (or partition tool,I forget its name),take a screenshot and upload here.

forumber2 said:
DON'T USE odin and other flash tools for our phone. It will full brick your phone.
Did you re-flash B518?
If you did,connect Phone while in Blue (or Pink) screen on Ubuntu. Open the disk manager tool (or partition tool,I forget its name),take a screenshot and upload here.
Click to expand...
Click to collapse
hey thanks a lot for replying ....
I dont have access into CWM
Im not sure how to reflash it with b518... I have the file....
i dont have access into the memory.... i connected the phone to ubuntu and nothing poped up... its not detecting the memory.....
if this disk manager is a software to download please tell me.

sudhodhan said:
hey thanks a lot for replying ....
I dont have access into CWM
Im not sure how to reflash it with b518... I have the file....
i dont have access into the memory.... i connected the phone to ubuntu and nothing poped up... its not detecting the memory.....
if this disk manager is a software to download please tell me.
Click to expand...
Click to collapse
Maybe the partitions on phone NAND is corruptted.
Disk manager (or partitio manager) is already installed on all of Ubuntu products.

forumber2 said:
Maybe the partitions on phone NAND is corruptted.
Disk manager (or partitio manager) is already installed on all of Ubuntu products.
Click to expand...
Click to collapse
hey thanks a lot i i got it back to the stock version
feels awsome to have sorted this nonsense....
big headache gone..... i dont know if i wanna mess around and upgrade it again... lol

Any help PLEASE! How did you do it?
Hi everyone,
Firstly let me thank anyone reading this in advance! Secondly let me extra thank anyone who helps me in advance!
Sudhodhan. How did you fix your phone?
I rooted my phone. Then I copied a new boot.img file into './cus_backup/image' directory and now the phone wont boot. It just keeps rebooting. I've looked through this forum but cant seem to find an answer. People with similar problems but not exactly the same.
When I go into the pink screen I cannot see the recovery image folder when I pug the USB from phone to computer.
My phone has android 2.3.5.
I cannot access the clockwork recovery mode (by holding power + vol up) it doesn't work anymore or at all?
I have Ubuntu and Xp on my computer.
When I connect phone to computer (while in the pick screen) ubuntu recognises a huwei device attached but adb does not see it. previously adb would see the device.
However when I let the phone keep rebooting endlessly there are moments when adb sees the phone. I have even opened a shell in adb on the device for a little while. but when I did I could not see any hidden directories or the './cust_backup/image' directory. I tried to push the original boot.img file over but that did not work either!
I am stuck.
If I could see the image directory while phone was in the pink screen I could copy original boot.img.
Any suggestions!
Cheers

Hi Koffs,
First check if your phone is U8800 and not a variant like U8800-Pro (+), U8800-51 or U8800-H.
In the case you have a regular U8800 I would suggest you install a stock rom.
For now I recommend B518, find here the link:
http://www.mediafire.com/download/p...1_(Beta1.0)(Overseas_Normal)(Gingerbread).zip