Related
I've had issues with the battery cover not being flush and having lips on both sides. Now you may think I'm crazy for posting this, but hell...I didn't think the solution I found would actually work.
Basically, I just took a post-it and folded it twice (maybe three, I forget) and placed it under the cover...perfectly flush now!
I figured it would just push the cover and create more lip, but instead I tried it and it make it fit perfect! All seriousness, I was considering using rubber cement to hold it...I'm glad I didn't.
Strange
Worked for me too! Who would have thought... Thanks for the advice.
Where did you place the post it? Dead center?
donatom3 said:
Where did you place the post it? Dead center?
Click to expand...
Click to collapse
Dead center over the battery.
I also cut it in half, it was pushing the cover a bit too far out near the camera.
wow! i didn't even realize this bothered me until you pointed it out. super simple fix. you sir, are a genius. well done!
woah cool
10char
This bothered the hell out of me as well... for some reason it's only the right side (when the phone is facing down) that doesn't sit flush on the edges. The left side is perfectly fine.
Unfortunately your fix doesn't do much to help my situation but I'll play around with it a little more. Great idea though
I noticed this also but when I put the ext battery that i bought for the Hero in it went away.. You can always put a Innocase II on it and that takes care of the problem too
MrDSL said:
I noticed this also but when I put the ext battery that i bought for the Hero in it went away.. You can always put a Innocase II on it and that takes care of the problem too
Click to expand...
Click to collapse
the ext battery fits with out a different cover?!?!?!? u lie!! show us some pics
xtkxhom3r said:
the ext battery fits with out a different cover?!?!?!? u lie!! show us some pics
Click to expand...
Click to collapse
sorry i should be more clear..its just a 2000 ext hero battery that is the same size as original..its was $10 on ebay so i went ahead and just got it for kicks.
oh ok... yea those batterys are the same thing as the 1500....
Mine is also lipped on the right side if the phone is facing down. I'm trying all kinds of things right now to fix this.
xtkxhom3r said:
oh ok... yea those batterys are the same thing as the 1500....
Click to expand...
Click to collapse
you say that but i have one of those batterys too...and you know what, i did get longer run time...
Dude you are a genious! Such a simple solution LOL Works great my cover is perfectly flush now. Will have to find something of similiar thickness to permanently stick to the backside of the battery cover.
Thanks
Works for me, greatly appreciated! Seriously bugged the hell out of me. It's not perfect but it's so much better
The post-it mod rocks! That did kind of annoy me before.
Works almost perfectly for me, what pisses me off about it is that my cover was flush until I removed it to change out my sd card.
wtf made you think of this?
fixed one little annoyance i had with the phone. thanks!
Just be careful that you don't add too much insulation and keep the heat from escaping the battery...
I had to do this with both of my EVOs. Pretty terrible that HTC can't even make a battery cover fit properly on a 'flagship' phone.
Man is this the stupidest problem ever...
The good news: I finally got my DHD yesterday...
The bad news: The battery cover is as bad as I've been hearing. For some reason I couldn't put it back on. So I pushed the Battery as far in as I could in order to put the cover on. The phone works great, but now the battery is stuck inside and won't slide out by itself and I don't know how to take it out
Please Help...
Put your fingers flat on the table, same width as the battery door.
Rest the DHD on your fingers (so that the battery door is facing the table.
Raise the DHD an inch or two and bring it down on your fingers (not so hard that it hurts).
Keep doing this, the battery will work its way free and drop onto the table.
I'll add a pic in a sec...
Thanks James, this definitely sounds very doable; I'm giving it a try now!
The battery has moved about half an inch now!! This is working *jumping up and down with joy*
I got the battery out!! Why does everyone else's battery just seem to slide out by itself? I thought it was because I pushed it too far in, but even when the battery is half way out, I still have to pull it out with some effort...
Maybe my phone just has a lot of "friction"? When I watch those YouTube videos, everyone seems to glide their fingers smoothly across the screen, but when I do it, it feels very fricative...do you guys put on hand lotion or something...
Do not press the screen too much, only a slightest touch is needed. Also if you have moist hands, it makes swiping the screen harder.
nubicurio said:
The battery has moved about half an inch now!! This is working *jumping up and down with joy*
I got the battery out!! Why does everyone else's battery just seem to slide out by itself? I thought it was because I pushed it too far in, but even when the battery is half way out, I still have to pull it out with some effort...
Maybe my phone just has a lot of "friction"? When I watch those YouTube videos, everyone seems to glide their fingers smoothly across the screen, but when I do it, it feels very fricative...do you guys put on hand lotion or something...
Click to expand...
Click to collapse
Probably because its a new phone. You have to play with it a little bit until the oil from your skin lubes up the screen. Then its all slidey slides.
I had a similar problem with my first DHD... part of the the plastic wrapper around the battery had folded back on itself along the forward edge of the battery. That caused the battery to get wedged inside. A little trimming of the plastic wrapper with a craft knife fixed it... YMMV
Sent from my Desire HD using XDA App
you sure you didnt put it back in upside down or something?
rossysaurus said:
you sure you didnt put it back in upside down or something?
Click to expand...
Click to collapse
I'm pretty I didn't because the phone was working but seriously I could totally go without the cover; the battery really gets stuck in there when it's inside!
nubicurio said:
I'm pretty I didn't because the phone was working but seriously I could totally go without the cover; the battery really gets stuck in there when it's inside!
Click to expand...
Click to collapse
No you can't - the WiFi/BT antenna is in that cover .
would've given you some extra grip tho
Now seriously, if when u look at ur battery there's no visible flaws that u can safely and/or easily remove and if your screen keeps giving you the finger in my opinion you should return it for a replacement. There's been enough faulty hardware cases, the folks at HTC know the drill by now. If that's not an option, sell it on ebay ( or your local online market ) and grab a new one;]
tkolev said:
No you can't - the WiFi/BT antenna is in that cover .
Click to expand...
Click to collapse
And I was wondering the whole time why that piece of plastic would cost 19 Euros!
bahkata said:
would've given you some extra grip tho
Now seriously, if when u look at ur battery there's no visible flaws that u can safely and/or easily remove and if your screen keeps giving you the finger in my opinion you should return it for a replacement. There's been enough faulty hardware cases, the folks at HTC know the drill by now. If that's not an option, sell it on ebay ( or your local online market ) and grab a new one;]
Click to expand...
Click to collapse
AWWW it's just my stupid, clumsy fingers are still trying to learn how to swipe across the screen...think I'm getting a hang of it now ...luckily no major flaws with my DHD so far *knock on wood*
Join the club and stay in
I got an aftermarket battery stuck in my DHD and had basically given up on getting it out until I found this thread. Nice work! Worked a treat after tapping it for what seemed like a couple of minutes.
Slow and steady wins the race!
Cheers guys
This is a picture of a circuit board from an LG WCP-700 Qi charger. It makes a very annoying beep, but I can't figure out what is making it. My best guess so far is the part labeled 331. Any help would be appreciated.
BadBoyNDSU said:
This is a picture of a circuit board from an LG WCP-700 Qi charger. It makes a very annoying beep, but I can't figure out what is making it. My best guess so far is the part labeled 331. Any help would be appreciated.
Click to expand...
Click to collapse
Is the beep that loud? If you find out, be sure to post it here. Mine is on it's way.
That looks like it. I'll certainly take mine out when it arrives in a few days, if you are too afraid to yank it wait and I'll let you know how it turns out.
I'd rather have a dead charger than a loud annoying one
Sent from my Nexus 7 using Tapatalk 2
Might want to check this out. Someone stated that they took it out and it's dead.
I have the same question, I got the case open expecting this to be easy but I'm not 100% sure what to pull off the PCB. I think you are right that it has to be the part labeled 331. There is just not anything else that it could be.
That said I'm not willing to pull it without some confirmation. Maybe somebody here with more EE experience can tell us for sure.
I don't get my nexus 4 until tomorrow, maybe once I have it I can get the charger to beep and listen for where the sound is coming from.
Apologies for being slightly OT (although I'll be looking to do this when I get mine).
I'm struggling to find a supported voltage range in any specifications for this pad - I'm UK based and need either an adaptor or convertor depending on the range.
Could someone who has one let me know what the specs are please?
How did you get it open??? I've been trying for a week now and have all but ruined the bottom ha! A "How To" would be appreciated!
Jester23 said:
How did you get it open??? I've been trying for a week now and have all but ruined the bottom ha! A "How To" would be appreciated!
Click to expand...
Click to collapse
The 4 little rubber feet on the bottom pull out and there are 4 small Phillips screws underneath.
I had to use a small screw driver to pry up on the feet, it felt like they might rip but they all came out undamaged. Once those screws are out the top and bottom are still held together by a couple of snap-tabs in the middle of the long sides. I was able to get them apart with a little prying and again nothing broke even though it felt like it might. The PCB is held on by 4 obvious Phillips screws.
Sorry I don't have any pictures and can't take any until after I get home from work later.
CodeMonkey said:
Apologies for being slightly OT (although I'll be looking to do this when I get mine).
I'm struggling to find a supported voltage range in any specifications for this pad - I'm UK based and need either an adaptor or convertor depending on the range.
Could someone who has one let me know what the specs are please?
Click to expand...
Click to collapse
Here.
brettray said:
The 4 little rubber feet on the bottom pull out and there are 4 small Phillips screws underneath.
I had to use a small screw driver to pry up on the feet, it felt like they might rip but they all came out undamaged. Once those screws are out the top and bottom are still held together by a couple of snap-tabs in the middle of the long sides. I was able to get them apart with a little prying and again nothing broke even though it felt like it might. The PCB is held on by 4 obvious Phillips screws.
Sorry I don't have any pictures and can't take any until after I get home from work later.
Click to expand...
Click to collapse
OK, mine is different then... I got it from Amazon and its a Verizon one and the bottom is all one solid rubery unit. I saw the 4 posts with screws when I pry it open but couldn't get to the screws.
Thanks!
Instead of pulling it or jacking up the PCB trying to disconnect, could you maybe just drown the thing in some sort of epoxy? if not muting it, may at least muffle it some
Check the ZENS Qi wireless chargers, no beep and work great!
Jean2000 said:
Check the ZENS Qi wireless chargers, no beep and work great!
Click to expand...
Click to collapse
I saw them and would love to but not available in Canada or the US it looks like...
Jester23 said:
I saw them and would love to but not available in Canada or the US it looks like...
Click to expand...
Click to collapse
They are now...!
check the store on wpcentral website
Jean2000 said:
They are now...!
check the store on wpcentral website
Click to expand...
Click to collapse
Looks like OOS currently.
Neo42 said:
Instead of pulling it or jacking up the PCB trying to disconnect, could you maybe just drown the thing in some sort of epoxy? if not muting it, may at least muffle it some
Click to expand...
Click to collapse
I've tried putting my finger over different parts of the PCB and the letting it beep, including "331", and nothing I do lessens the volume. That's why I'm baffled on what part is the actual speaker.
The part labled 331 looks like an choke/inductor to me. I wouldn't remove it...
edit: do you have a picture of the other side of the PCB?
Luxferro said:
The part labled 331 looks like an choke/inductor to me. I wouldn't remove it...
edit: do you have a picture of the other side of the PCB?
Click to expand...
Click to collapse
The only things on the back side of the PCB are the two LEDs at the top. I am beginning to think that the sound is coming from the coil itself, like it is performing double duty as a charging coil and as a speaker coil.
BTW, I got my phone today and can confirm (as has been said elsewhere) that this charger works perfectly for charging the nexus 4. Well... expect for the loud beeps.
Jester23 said:
OK, mine is different then... I got it from Amazon and its a Verizon one and the bottom is all one solid rubery unit. I saw the 4 posts with screws when I pry it open but couldn't get to the screws.
Thanks!
Click to expand...
Click to collapse
Just for reference here are some pictures of my charger, so that you can see the screw locations. Mine is also Verizon branded and came from amazon.
brettray said:
Just for reference here are some pictures of my charger, so that you can see the screw locations. Mine is also Verizon branded and came from amazon.
Click to expand...
Click to collapse
Awesome, turns out the plugs were there the two I had tried to pry out tore making me think they did not come out. So, now just to figure out where the beep is coming from!
Hey! I just replaced a broken screen and it went quite well, aside from the fact that my mic is not really working as it should anymore (it sounds like I am really far away whenever I speak). After the reassembly, I noticed one plastic piece which for the life of me I cannot find a suitable place for. Does anyone know where it is supposed to go?
I've never had that piece loose after replacing my screen (I've gone through 4!!).
The microphone problem seems to be a common problem with screen replacements (judging by xda, other forums and product reviews). I don't know a fix for that, but wanted to let you know it seems to be everyone
Sent from my MB526 using xda premium
Haha ok, no I haven't been able to spot it n any how-to video or anything so I am completely stumped. Does anyone know if the mic problem is fixable? Been googling a bit without result.
Edit: " end of my woes.
I had the same thing as adam in the end. its the little orange silicon bit that shields the microphone. it fits into the fornt cover near the microphone hole. I accidentally threw it away with the old cover and then had the problem. I had to buy a complete new casing in the edn but it is working fine now.
Chris"
Found this in another thread, but... Hmmm, I know of the three orange parts and I have taken good care of them. None of those are clowe to the mic though, or perhaps I am mixing up the mic with somethng else? Oh well, there was somethng else about a rubber part behind the display, perhaps I'll just stick my rubber thingie in there. Yup.
rakitin said:
Edit: " end of my woes.
I had the same thing as Adam in the end. its the little orange silicon bit that shields the microphone. it fits into the front cover near the microphone hole. I accidentally threw it away with the old cover and then had the problem. I had to buy a complete new casing in the end but it is working fine now.
Chris"
Found this in another thread, but... Hmmm, I know of the three orange parts and I have taken good care of them. None of those are close to the mic though, or perhaps I am mixing up the mic with something else? Oh well, there was something else about a rubber part behind the display, perhaps I'll just stick my rubber thingie in there. Yup.
Click to expand...
Click to collapse
I think I know what Chris was referring to, it's a rectangular red/orange silicone.... thing. I'll edit this with link to a video at the time it appears, when I get to a computer that is.
-Sent from my MB525 on Quarx's 2nd boot CM10 [BL7]
pk92 said:
I think I know what Chris was referring to, it's a rectangular red/orange silicone.... thing. I'll edit this with link to a video at the time it appears, when I get to a computer that is.
-Sent from my MB525 on Quarx's 2nd boot CM10 [BL7]
Click to expand...
Click to collapse
Thank you! I will open it up again tonight and see if I can fix it. Apparently I also managed to cause some problem with the headset since the right earpiece no longer works. Only the left one... Seems like i really shouldnt do these kinds of repair work myself.
Edit: i think I used too much glue a the bottom while fastening the screen and that is why the mic is not working as it should. Just putting it here so others might take t ny consideration if they see this post. Guess the only way to fixit is to buy a new front.
Ok guys - weird happenings, i use a usb cable from my desktop pc to charge my N4 at times. I had been sitting it on top of the pc tower & it has fallen onto the laminate floor 3 times and came out without injury. So i thought it was vibration from my pc tower, so i have been sitting the phone on my pc desk surface, today i found the phone hanging half way across the edge of the desk. There is no serious vibration to mention from my pc or desk, the phone has not been ringing for the phone vibrate to cause it either. So does anyone else have any paranormal activity with their N4 strangely falling off surfaces??
only thing i notice is the glass bottom surface is very slidey
This has been a problem since day one. Put a rear screen protector on. That'll fix you up.
this is the reason I bought a bumper when I ordered mine
Yeah, that's not paranormal I'm afraid, the back is very slippery, the device can and does slide even with no vibrations at all. Just make sure to place something in the surroundings of the phone when you leave it charging that can block random slides.
cheers guys, this is surely a bad design, im so lucky no serious damage occurred. Ill buy and try the rear screen protector as im not a fan of phone covers etc, Fingers crossed this does the trick. Many thanks guys for the feedback :good::good: :laugh::laugh:
mystic.bertie said:
cheers guys, this is surely a bad design, im so lucky no serious damage occurred. Ill buy and try the rear screen protector as im not a fan of phone covers etc, Fingers crossed this does the trick. Many thanks guys for the feedback :good::good: :laugh::laugh:
Click to expand...
Click to collapse
You are charging it with your PC on top of the tower with a cable tugging on it... And you are saying it is bad design? Give me a break.
Try using your charger and maybe put it someplace where the cable will not pull it. This is not rocket science.
Sent from my Nexus 4 using xda app-developers app
Richieboy67 said:
You are charging it with your PC on top of the tower with a cable tugging on it... And you are saying it is bad design? Give me a break.
Try using your charger and maybe put it someplace where the cable will not pull it. This is not rocket science.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
stop being such a forum ****.
I never said i was charging it on top of the pc tower, i sat it there. When its charging its on a flat desk surface as is the charge cable. I have sat the phone on my desk and sat it on top of my wallet and it falls off. So with this phone i will need to be careful how i place it. Of course its a bad design, i should be able to sit my phone flat on a flat surface and not worry about it falling onto the floor. Nexus aint gonna give me a new one if it were to get broken and no warning came with the phone.
oh and you know what, common manners to fellow humans, that aint rocket science :silly:
Wrong forum for this discussion really
Sent from my Nexus 7 using Tapatalk 2
estallings15 said:
This has been a problem since day one. Put a rear screen protector on. That'll fix you up.
Click to expand...
Click to collapse
can you give me a pointer to finding one, all i can find on ebay is front screen covers and gel covers etc , thanks
mystic.bertie said:
can you give me a pointer to finding one, all i can find on ebay is front screen covers and gel covers etc , thanks
Click to expand...
Click to collapse
Search for Zagg. Also do not search for screen protector. Try searching "skin" or back protector.
grubbster said:
Search for Zagg. Also do not search for screen protector. Try searching "skin" or back protector.
Click to expand...
Click to collapse
ok thanks matey, the zagg ones are very expensive so i bought one of these from germany only £2.55. :good:
http://www.ebay.co.uk/itm/360592861179?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
simms22 said:
my n4 has the same problem, its constantly trying to cut its life early. ive considered taking it in for therapy, but i havent found a doctor that specializes in nexuscide. yesterday morning, i woke up to it dangling by a chord besides me, about an inch above my hard ceramic tile floor
Click to expand...
Click to collapse
close call mate, i can vouch that it is well made after 3 falls and coming out unscaved.
my daughter found mine yesterday half hanging off the edge of my desk :silly:
grubbster said:
You seem very angry. This is just an internet forum. Not much to get worked up over.
Click to expand...
Click to collapse
your right thats why im perfectly calm, im just fed up with idiots spoiling the forums i use. It just puts me off using that particular forum again.
mystic.bertie said:
close call mate, i can vouch that it is well made after 3 falls and coming out unscaved.
my daughter found mine yesterday half hanging off the edge of my desk :silly:
Click to expand...
Click to collapse
my n4 has probably fallen/jumped at least 50 times over the past 5 weeks, and its still in perfect condition(no cases or screen guards). luckily, the far majority of falls have been on a carpet, but some have been pretty scary
I can also say that I find mine sliding. It's quite weird actually, from the tests I've done I've noticed that it usually occurs when I have it on my leather couch or my ottoman. Yes, I know it's not a desk but the phone is sitting there rather level. It has also done it on my home desk as well, but not at my work desk (yes, both desks are level). It kind of reminds me of an air hockey table type situation. If you have it on your desk and push it, it doesn't require as much work as lets say an SGS3, Galaxy Nexus, or Blackberry to move. Basically the way it's designed causes it to not create much friction between it and the surface it is on.
Although, none of this bothers me since the phone is a fricken beaut.
crecsky said:
I can also say that I find mine sliding. It's quite weird actually, from the tests I've done I've noticed that it usually occurs when I have it on my leather couch or my ottoman. Yes, I know it's not a desk but the phone is sitting there rather level. It has also done it on my home desk as well, but not at my work desk (yes, both desks are level). It kind of reminds me of an air hockey table type situation. If you have it on your desk and push it, it doesn't require as much work as lets say an SGS3, Galaxy Nexus, or Blackberry to move. Basically the way it's designed causes it to not create much friction between it and the surface it is on.
Although, none of this bothers me since the phone is a fricken beaut.
Click to expand...
Click to collapse
man this means no where can be trusted to sit your phone. what puzzles me is it always slides off to danger, not further onto my desk .
minieod said:
everyone is MAKING FUN OF YOU
do you not see that?
wow.
if you have something on top of a flat surface...unless there is something acting upon it...there is no way for it to "slide off" ... how can you perceive that even possible?
Click to expand...
Click to collapse
im not making fun of him. and there is something acting on it, its called gravity. it does mean that the surfaces arent perfectly flat, but even the slightest non perceivable slant cause it to slide.
mystic.bertie said:
your right thats why im perfectly calm, im just fed up with idiots spoiling the forums i use. It just puts me off using that particular forum again.
Click to expand...
Click to collapse
Better get a thicker skin quicker as you're dealing with a lot of teenagers in these forums. Its like playing WoW, way too many prepubescent teens.
guys, it's not the phone. It's the surfaces you're placing it on. Most tables/desks are nice, smooth and shiny. Combine that with the glass and a NOT SO PERFECTLY FLAT SURFACE and you get falls
Trust me...it's not voodoo or non-Newtonian physics
Just get any cheap gel case and you're set. I actually got a brilliant one for 2 GBP Really nice looking and with really really grippy sides.
Thread clean. It's really not nice to make fun from someone, especially here - on a biggest tech forum in the world
@OP Private messages are meant to be PRIVATE, so please don't post them here.
Now let's back on topic, please.