Related
Hi Guys
I recently acquired one of the 10.1 LE's and immediately ran into problems with my PC refusing to recognize the Tab. I searched high and low for a solution, including installing Kies, the USB drivers and ever other mad trick people suggested, but nothing worked.
What made this even worse was the Tab would charge while plugged into the PC, so the cable must have been working... well that assumption was wrong, read on.
I live in the UK and the Tab 10.1 is not available here yet, but I realised the 7" Tab appeared to have the same charger and usb cable, so I took a chance and purchased one of these, suddenly everything started working and my PC picks up the tab.
So the moral of the story is, if your does not work neither, try a different cable
What do to when one only has one cable. Where might I get another? Have tried to connect to two different computers already. Tab give notification but no reaction from computers. Kies will not transfer videos. Will contact Samsung support.
Have already downloaded device usb drivers from Samsung. Let Kies look for drivers but no avail. Any help would be appreciated. Tab showed connect one time, but pc wouldn't react. Window 7 64-bit and XP service pack 3.
Turn off USB Debugging!!!!! You're computer will not recognize your device if debugging is on. Turn it off.
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
have you tried put yoy're phone in depurating mode?
I guess yo mean Debugging mode, as I couldn't found Depurating anywhere. Have selected it and the same effect
HI
I had the same problem after getting nowhere with it, for some reason and I don"t know why, I put it in download mode and then connected it to odin and my PC found it I then disconected it and its been fine eversince.
Jim
#Samsung Kies always makes problems on Windows x64 !
##I would recommend, if you got 32-Bit Computer, to use that ;-)
#If you Want just flash over Odin, then is this driver package enough
##[Link]--http://download2us.softpedia.com/dl/85b009d47a0940e89eee2297a531d100/4f577870/300141878/drivers/mobile/SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0.exe
#The Package is also enough for If you want just to connect to mass Storage (Phone's SD Card)
Don't Forget to Thanks, if it was useful for you!
_______________________________________________
Hi there.
By direct connection you mean the USB Mass Storage mode, right?
It might be some weird, random problem with the samsung system drivers. I used to have such problems about two years ago, back in the days of Froyo. Have you tried re-installing them? There was a link to proper drivers file in one ICS installation tutorial, and those drivers can be downloaded here. If you go about trying this method, lemme know if it worked.
Cheers.
PS: Unlike diklooc there suggested, do not never EVER go back to x86 OS. That's the worst advice. Kapisch?
Did you check your usb port in System ?
Sometimes it stuck with another lastest device
Hi,
have tried everything, and finally only in a WinXP32 could be abble to get the error shown on the file atached.
But nothing (warnings) come up in Device Manager
Unninstalled everything (kies) and tried to install only the driver and nothing happens.
Should I try to mount it on a linux?
or is it dead?
thanks
i have this problem too
wat chan I do???
my sgs can not connect to my PC
This may help...
Hi there - I don't have the same phone as you, but I did encounter the exact same problem. I've been searching around and it looks like the most common fix was to simply replace the cable. I don't know what kind of cable you have, but my phone (a Samsung Focus i917) uses a mini-usb connector. I found that my Amazon Kindle used the same connector.
When I was using the Samsung cable, I'd get intermittent connects and charge power. The OS would report unknown device. When I switched computer's = same result. I switched to my Kindle cable and the computer instantly recognized the device and installed the drivers. After 12 hours of troubleshooting, factory resetting my phone (blah - lost everything) it turned out to be the cable. I know that this isn't an easy troubleshooting step for most people, because who has an extra cable? I just got lucky that my Kindle uses the same connector. I'm now suspecting (due to the prevalence of this connectivity problem coming from people with Samsung phones - there are a LOT of reported issues) that there is probably a Samsung cable problem in general.
Good luck with your phone.
try
try select mass strong ...
Tips and unlock advice.
nasdriver said:
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
Click to expand...
Click to collapse
Nasdriver, I currently have a similar problem but mine is related with Samsung Kies as I can't get either my older SGS1 or my newer Samsung Nexus to get recognized by Kies. I also suspected the cable thing and even read it could be a USB port issue but neither of them was my problem (I have 3 cables and 8 ports on 2 computers that result in the same thing). I can connect other devices with the same cables and they work, so I suspect my problem is focused around the Samsung device drivers.
My advice is if you can go in a systematic manner, first focus on the cable (easiest to replace), if you get the same results with a new cable, then focus on the USB physical port, clean it with some Isopropyl alcohol, if the port works for other devices (camera, other phones, etc..) on the same cable but not with the SGS, then try reinstalling the samsung device drivers.
Oh, and if you want to unlock your phone, the EASY way is to download the Galaxy S Unlock application from the Android market (no affiliation) it's free (but the developer does accept donations) and it WORKS. I won't bore you with my 3 week journey trying to unlock my Bell SGS phone here in Canada, had I found this app first I would have done it in less then 2 min saved myself a LOT of frustration.
Good luck
Hey all. Just got my Galaxy S4 today and I was loving everything about it until... right now. For some reason, the darn USB won't stay connected to the computer. It doesn't matter if it's simply plugged into the computer as an "installer" or as a media device. It'll constantly disconnect and reconnect itself, even when I'm not transferring any files.
It's not the my computer/USB ports, either, since I can transfer files between my HTC Thunderbolt and Nexus 7 fine. I've also tested 2 other USB cables and they all behave the same way.
Anyone know what's going on? Did I get a lemon?
No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.
snwman said:
No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.
Click to expand...
Click to collapse
same problem with me!
every thing ok with s3 but the problem only with s4
please we need help to solve this problem!
Same problem
I have also been dealing with this for a while now. I have Windows 7 64bit and I have reinstalled the drivers many times through Kies and manually. It seems like the problem is getting worse since initially I could do some file transfer through usb if i fiddled with the device (changing usb ports, unplugging it, etc). Now I am hard pressed to get it to show up on the computer through MTP at all.
This is quite annoying since I am developing an android app and I need a usb connection in order to test it. A fix would be awesome.
I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.
retsnom said:
I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.
Click to expand...
Click to collapse
I do same thing, it is worked in another computer.
I am already put fresh win 7 but still same problem..
im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms
snwman said:
im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms
Click to expand...
Click to collapse
I'm on stock, no root.
Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app
Tested it out on a fresh copy of Windows 7 and it still continuously disconnect. What gives?
taargaa said:
Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Oops, missed your post. Unfortunately, it disconnects regardless of the phone's state.
My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.
dirrtpoor said:
My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.
Click to expand...
Click to collapse
I've been trying all kinds of different combinations of USB leads, phone settings and ports all morning and was just about getting ready to start a new Olympic sport of S4 hurling when I came across this post and plugged my USB straight into the back of my machine and it finally works!! Thank you dirrtpoor for your input - a simple fix, but nevertheless it worked.:good:
I suppose it makes sense that a quad core 1.9Ghz phone would be a power hog.
It wouldn't work on my home PC whatever I tried. Front or back USB ports.
On my dads PC sometimes it would display OK and other times "usb device has malfunctioned" (didn't try the rear USB port)
On my work PC it works fine on the rear ports.
I was having the same problem a few days ago, but then I reformatted the SD card, now everything seems OK.
Even the stock gallery app works now...?!
Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.
Samsung S4 sync problem
mgrisan1 said:
Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.
Click to expand...
Click to collapse
This may be laughably obvious but I'm a former Apple user, which has it's own dedicated USB connector, so I forget sometimes with the Samsung S4, which has a standard (looking) micro USB connector that I need a USB cable that is enabled for syncing as well as charging...not all USB cords with micro connectors on the phone end will carry the data because I imagine Samsung has made their phone's connector require a different wiring in the cable.
I was pulling my hair out yesterday trying to figure out why the computer wouldn't see the phone..then looked at the USB cable and realized I'd plugged a non-syncing cable in. I tried the cable that came with the phone and bingo, worked like it was supposed to.
Hope this helps, sometimes it's the little things we overlook that drive us nuts.
Any way to connect in master storage with out root.
Sent from my GT-I9500 using Tapatalk 4
Use a different usb cable and usb port. I know it sounds stupid but there has definitely been phantom problems which were solved this way, even with something as simple as adb commands
i have same problem. trying all the way but always with the same result...
hi everyone!
its been a while since i have posted here [was lost in the apple wilderness for a few years]
i have an n9005 and my laptop is samsung 5 series ultrabook with windows 8.1 64bit running, this lappy has one usb 3.0 port
i have never managed to connect the note in 3.0 mode, this happened only once by accident when the phone also notitifed me that it is connected in 3.0 usb mode but never after that.
the usb 3.0 port charges the phone fine but does not show it as been connected to the computer, not in device manager or anywhere else, 2.0 works fine.
ill be grateful if anyone can shed some light on this for me, apologies if im breaking any rules!
Thanks.
Since you said you had connection once by accident, I would start with basics: try another cable and make sure ports are fine. charging uses only 2 wires, all the rest is for data. On my Note 3 USB port is very finicky when using USB3 cable even for charging, I have to wiggle and push hard to get it to charge, USB2 cable works fine, so I'm not even sure if its phone port or Samsung cable, just waiting for it to fail altogether before trouble shooting.
d3aded said:
hi everyone!
its been a while since i have posted here [was lost in the apple wilderness for a few years]
i have an n9005 and my laptop is samsung 5 series ultrabook with windows 8.1 64bit running, this lappy has one usb 3.0 port
i have never managed to connect the note in 3.0 mode, this happened only once by accident when the phone also notitifed me that it is connected in 3.0 usb mode but never after that.
the usb 3.0 port charges the phone fine but does not show it as been connected to the computer, not in device manager or anywhere else, 2.0 works fine.
ill be grateful if anyone can shed some light on this for me, apologies if im breaking any rules!
Thanks.
Click to expand...
Click to collapse
The USB 3 thing is quite stupid from Samsung - but it makes some sense if you think of it as 99% marketing on top of which some guys decided to provide some form of emergency help but without compromising other things too much
Bottom line - USB3 is not active by default! Once you have it plugged it only goes to USB2 and you need to go to Notifications and click on "Connected as a media device" - and then modify that to "MTP on USB3" or something like that. That checkbox will NOT stick (so next time you will NOT be in USB3 mode) and will also be converted back to USB 2 after 10 minutes (I presume 10 minutes of inactivity, since otherwise that would be very, very stupid, but nothing will surprise me on that).
Whatever you saw on the PC it was most likely a message telling you that the device might be performing faster in a USB3 port - even if you already were plugged in a USB3 port What Windows wanted to say was more along the lines "the device might perform better in USB 3 mode"
xclub_101 said:
The USB 3 thing is quite stupid from Samsung - but it makes some sense if you think of it as 99% marketing on top of which some guys decided to provide some form of emergency help but without compromising other things too much
Bottom line - USB3 is not active by default! Once you have it plugged it only goes to USB2 and you need to go to Notifications and click on "Connected as a media device" - and then modify that to "MTP on USB3" or something like that. That checkbox will NOT stick (so next time you will NOT be in USB3 mode) and will also be converted back to USB 2 after 10 minutes (I presume 10 minutes of inactivity, since otherwise that would be very, very stupid, but nothing will surprise me on that).
Whatever you saw on the PC it was most likely a message telling you that the device might be performing faster in a USB3 port - even if you already were plugged in a USB3 port What Windows wanted to say was more along the lines "the device might perform better in USB 3 mode"
Click to expand...
Click to collapse
I'm not sure where did you get the idea of USB3 being a gimmick, or stupid, but it is neither. I was just copying my pictures folder to my computer, 170MB worth took instant on USB3, where it took over 10 sec using USB 2, I wish all gimmicks worked that well.
Yeah, you have to activate it on the phone, like you have to activate MTP or PTP mode, maybe for compatibility with some obscure software, who knows. BTW I read somewhere USB3 does work on Win only , so all bets off if you have Mac.
pete4k said:
I'm not sure where did you get the idea of USB3 being a gimmick, or stupid, but it is neither. I was just copying my pictures folder to my computer, 170MB worth took instant on USB3, where it took over 10 sec using USB 2, I wish all gimmicks worked that well.
Yeah, you have to activate it on the phone, like you have to activate MTP or PTP mode, maybe for compatibility with some obscure software, who knows. BTW I read somewhere USB3 does work on Win only , so all bets off if you have Mac.
Click to expand...
Click to collapse
Big words from somebody that two posts above did not even feel the need to mention that USB3 needs to be MANUALLY activated EACH TIME
That being said for your own example above - you "gained" 10 seconds to transfer those files, and you lost 10 seconds since you had to activate USB3 mode (which generated a delay not only since you had to activate it on the phone but also since the PC had to re-detect the device). That is precisely the definition of a gimmick
Yes, USB might be interesting one-time when you will really need to transfer 10 gbytes of data quickly from your internal storage (which I don't use that much anyway), but before that you really need to know how to activate this
And keep in mind that for the "external microSD" there is no real difference in speed (but a very large one in heat and power consumption).
xclub_101 said:
The USB 3 thing is quite stupid from Samsung - but it makes some sense if you think of it as 99% marketing on top of which some guys decided to provide some form of emergency help but without compromising other things too much
Bottom line - USB3 is not active by default! Once you have it plugged it only goes to USB2 and you need to go to Notifications and click on "Connected as a media device" - and then modify that to "MTP on USB3" or something like that. That checkbox will NOT stick (so next time you will NOT be in USB3 mode) and will also be converted back to USB 2 after 10 minutes (I presume 10 minutes of inactivity, since otherwise that would be very, very stupid, but nothing will surprise me on that).
Whatever you saw on the PC it was most likely a message telling you that the device might be performing faster in a USB3 port - even if you already were plugged in a USB3 port What Windows wanted to say was more along the lines "the device might perform better in USB 3 mode"
Click to expand...
Click to collapse
xclub, you are such a life saver, i can call myself stupid, or i can call samsung stupid, but you sir have pointed out the obvious to me
thanks!
big thanks to pete4k as well!
Hi,
I've been struggling with this problem ever since I've had the Note 3 ( since December). I've been unable to find a solution so am turning to this forum in the hope that someone can shed some light on this.
When I connect via my USB 3.0 port and select MTP (usb 3.0), then try to transfer a file from the note 3 to my pc, the progress bar comes up but sits there at 0% for a while then a message pops up "a device attached to the system is not functioning".
At this point going to other folders reveals no files although the current folder still shows them. This suggest that there is a disconnection of some kind.
Switching back to plain MTP this transfer will work but obviously at usb 2.0 speeds.
I am running Windows 7 and the usb port I have is via a card attached which is an Asus u3S6 (usb 3 / sata 6) card. The chipset on the card is a NEC chip and my other use for it is a bunch of external SATA drives in a USB 3 enclosure. Needless to say there are no problems with running these drives through the ports.
I have Kies 3 installed so any usb drivers needed for the note 3 should be fine. I'm stumped so anyone that can help me troubleshoot this I'd be grateful.
Have you tried enabling " USB Debugging " ?
hey_joe said:
Have you tried enabling " USB Debugging " ?
Click to expand...
Click to collapse
Yes sorry I forgot to add that fact. It makes no difference.
Guess no one knows
i have somewhat similar problem, at some point of usb 3 file transfer the progress bar freezes and so is "my computer". interestingly the file transfer to note from the pc always works fine, but it always freezes at some point when copying files from note to pc, even during kies backup. usb 2.0 works flawlessly.
i've messed around with usb 3 drivers (asmedia) and even updated its firmware but the freezeups still remain.
gonna try usb 3 transfer on a different pc tomorrow.
evgenetic said:
i have somewhat similar problem, at some point of usb 3 file transfer the progress bar freezes and so is "my computer". interestingly the file transfer to note from the pc always works fine,.
Click to expand...
Click to collapse
This sounds like a different problem but I did get to the bottom of my problem which turned out to be the Anker 2 port hub I had connected to the usb 3.0 port. I didn't think to eliminate this but when I connected directly the problem goes away so the hub I had bought purely to extend the ports for convenience is faulty or incompatible.
Perhaps you have an extension or hub too in which case I'd make sure you connect directly.
USB3 seems a bit flaky in implementation. I had probs with my N3, a Corsair USB3 stick and a USB3 ext HDD. Problem turned out to be the ports on the PC. They would work with most devices but were intermittent or non-functional on others. Of course, among the USB3 devices it WOULD work with were the ones the vendor had. For some devices it behaved like the USB3 extra connectors in the plug or socket weren't long enough - push it in harder or push it sideways slightly and it would connect but drop as soon as you let go. (not good to do 0 USB carries power and this is a good way to get an arc across the plug and fry things)
The PC vendor gave me an add-on front port panel and all is fine now. Even though it plugs into the same port on the MB.
Note the USB3 HDD still pops up the 'check drive' error every time I connect but I haven't taken the time to nuke it and rebuild yet. But the Corsair now works and so does the phone.
Ah, the joys of the MTP protocol...
Same issue here. As well as it stops responding halfway through a transfer, crashes the connection when making a new folder, takes about 3 years to copy 1GB, randomly disconnects...
My TF700 started doing this after the 4.1.2 update removed UMS. My S3, same story. My Note 3, same story. 29 different computers, 4 different systems (XP, 7, 8, OSX). Different cables, different ports, with and without drivers, with and without USB debugging.
I bloody hate MTP. It's useless, limiting (because now it can't be used as a drive to attach to a mediaplayer via USB..) and about as stable as nitroglycerin during an earthquake.
Journyman16 said:
.... the plug or socket weren't long enough - push it in harder or push it sideways slightly and it would connect but drop as soon as you let go. (not good to do 0 USB carries power and this is a good way to get an arc across the plug and fry things)
Click to expand...
Click to collapse
I thought I'd give up on hubs and just get an extension as my USB3.0 is on the back of the computer and not that accessible.
I've seen a lot of complaints about hubs and simple extensions that have this poor connectivity which seems crazy to me since it's a bit more important to have a solid connection on USB 3 plugs, besides which it's not as though the usb connectors are rocket science.
I'll try the extension and hope I get a reasonable one.
well i did try the usb 3.0 file transfer on a different pc with a different usb controller and it worked fine, copied my 5gb music folder to the pc without any problems. so in my case i guess it's some incompatibility with the asmedia 104x controller (i did connect directly in both cases and the same cable was used).
nm
---------- Post added at 04:05 PM ---------- Previous post was at 03:35 PM ----------
ShadowLea said:
Ah, the joys of the MTP protocol...
Same issue here. As well as it stops responding halfway through a transfer, crashes the connection when making a new folder, takes about 3 years to copy 1GB, randomly disconnects...
My TF700 started doing this after the 4.1.2 update removed UMS. My S3, same story. My Note 3, same story. 29 different computers, 4 different systems (XP, 7, 8, OSX). Different cables, different ports, with and without drivers, with and without USB debugging.
I bloody hate MTP. It's useless, limiting (because now it can't be used as a drive to attach to a mediaplayer via USB..) and about as stable as nitroglycerin during an earthquake.
Click to expand...
Click to collapse
it seems like it is indeed MTP issue here ! i rolled back to the old 2006 microsoft driver and i managed to do a full backup including music and everything else with kies. but after a while i tried again and it froze up again, i'll keep experimenting.
Sorry to resurrect this 3 month old thread but is there any way to fix this?
Whenever I want backup anything from my phone storage to PC, I have to do it in chunks of like, 50 files or less (huge PITA with TiBU). If I try to copy the whole folder, my computer locks up and I have to hard reset it. I've tried everything mentioned here short of buying a new USB3 controller.