Hi All,
I just purchased a Galaxy Note 3, Model # SM-N900 (32GB)
I installed CWM Recovery 6.0.4.3 after that I tried to restore to Stock Firmware but couldn't
Everytime I tried to restore it fails right after writing cache.
After installing CWM, when I put phone in Download Mode top left corner of my phone screen shows following
ODIN MODE (in Red)
Product Name: SH-N900 (In White)
Current Binary: Custom (In White)
System Status: Custom (In White)
Warranty Bit: 1 (In Grey)
I couldn't use this phone even one day. Somebody Please help.
sahriar said:
Hi All,
I just purchased a Galaxy Note 3, Model # SM-N900 (32GB)
I installed CWM Recovery 6.0.4.3 after that I tried to restore to Stock Firmware but couldn't
Everytime I tried to restore it fails right after writing cache.
After installing CWM, when I put phone in Download Mode top left corner of my phone screen shows following
ODIN MODE (in Red)
Product Name: SH-N900 (In White)
Current Binary: Custom (In White)
System Status: Custom (In White)
Warranty Bit: 1 (In Grey)
I couldn't use this phone even one day. Somebody Please help.
Click to expand...
Click to collapse
Use odin 3.07 it's the best one
jaythenut said:
Use odin 3.07 it's the best one
Click to expand...
Click to collapse
Same thing happened. Following happens when I try to restore.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900ZSUBMJ2_N900OZSBMJ2_N900XXUBMI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> sboot.bin
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
sahriar said:
Same thing happened. Following happens when I try to restore.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900ZSUBMJ2_N900OZSBMJ2_N900XXUBMI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> sboot.bin
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Your not trying to down grad your firmware Sammy won't let you you have to have the same or newer get the latest updates from www.sammobile.com
No. I am on same version.
sahriar said:
No. I am on same version.
Click to expand...
Click to collapse
Watch "How to Unroot Galaxy Note 3!" on YouTube
https://www.youtube.com/watch?v=_sMnC6UkJBI&feature=youtube_gdata_player
Same happened for Me and I solved the problem where it's with the boot loader, You need removed from the tar file
Regards
it is a weird issue, You could try flashing back a custom recovery and erase Cache From there in case it fixes the Issue with odin. Personally I prefer Odin V1.85.
Wishing you good luck =D
Envoyé de mon SM-N900W8 en utilisant Tapatalk
jamesst20 said:
it is a weird issue, You could try flashing back a custom recovery and erase Cache From there in case it fixes the Issue with odin. Personally I prefer Odin V1.85.
Wishing you good luck =D
Envoyé de mon SM-N900W8 en utilisant Tapatalk
Click to expand...
Click to collapse
I have installed CWM Recovery, Cleared every Cache and wiped data. More over no use. My phone is not turning on and I can not restore. After I try to restore firmware and it fails phone screen show Emergency recover screen by kies. after that if I install CWM recovery via ODIN phone turn on at stuck at glowing samsung logo.
sahriar said:
I have installed CWM Recovery, Cleared every Cache and wiped data. More over no use. My phone is not turning on and I can not restore. After I try to restore firmware and it fails phone screen show Emergency recover screen by kies. after that if I install CWM recovery via ODIN phone turn on at stuck at glowing samsung logo.
Click to expand...
Click to collapse
At this point it is normal it gets stuck at samsung logo.
Odin should not be having issue restoring your firmware, maybe the data is corrupt? You could try redownloading it or you could even try using another computer. I have never experienced such issue with Odin and a firmware SamFirmware since these are the stock one.
I don't know much about how CWM format partition, I am used to TWRP which I find way better but I don't think it would matter.
On the other side, what you could do is install custom recovery TWRP, then wipe everything, reboot back to recovery (this is really needed), then use adb to upload a custom rom and install it from TWRP, if everything goes well, your device should boot.
Envoyé de mon SM-N900W8 en utilisant Tapatalk
algaleka said:
Same happened for Me and I solved the problem where it's with the boot loader, You need removed from the tar file
Regards
Click to expand...
Click to collapse
How to do so?
jamesst20 said:
At this point it is normal it gets stuck at samsung logo.
Odin should not be having issue restoring your firmware, maybe the data is corrupt? You could try redownloading it or you could even try using another computer. I have never experienced such issue with Odin and a firmware SamFirmware since these are the stock one.
I don't know much about how CWM format partition, I am used to TWRP which I find way better but I don't think it would matter.
On the other side, what you could do is install custom recovery TWRP, then wipe everything, reboot back to recovery (this is really needed), then use adb to upload a custom rom and install it from TWRP, if everything goes well, your device should boot.
Envoyé de mon SM-N900W8 en utilisant Tapatalk
Click to expand...
Click to collapse
Tried to restore it from 3 diffrent version of windows on 3 diffrent computer. Didn't do. Also download 3 type of firmware. All same.
sahriar said:
Tried to restore it from 3 diffrent version of windows on 3 diffrent computer. Didn't do. Also download 3 type of firmware. All same.
Click to expand...
Click to collapse
Did you try what I also said ?
Envoyé de mon SM-N900W8 en utilisant Tapatalk
jamesst20 said:
Did you try what I also said ?
Envoyé de mon SM-N900W8 en utilisant Tapatalk
Click to expand...
Click to collapse
Yes. But TWRP do not have any version for SM-N900.
sahriar said:
Yes. But TWRP do not have any version for SM-N900.
Click to expand...
Click to collapse
Hmm right it is not available for your device :/
Use CWM then, it should be the same result in the end.
Follow the steps entirely that I mentioned and your device can only work.
Does CWM says something when you try to mount the cache partition?
Your issue is very interesting me, hmm if you have skype, just add me, it is Jamesst20
Envoyé de mon SM-N900W8 en utilisant Tapatalk
algaleka said:
Same happened for Me and I solved the problem where it's with the boot loader, You need removed from the tar file
Regards
Click to expand...
Click to collapse
If you please tell me ho you solved this problem that will help me a lot.
Thanks in advance
Any luck with this?
jamesst20 said:
Hmm right it is not available for your device :/
Use CWM then, it should be the same result in the end.
Follow the steps entirely that I mentioned and your device can only work.
Does CWM says something when you try to mount the cache partition?
Your issue is very interesting me, hmm if you have skype, just add me, it is Jamesst20
Envoyé de mon SM-N900W8 en utilisant Tapatalk
Click to expand...
Click to collapse
It just simply mount or dismount it.Says nothing.
sahriar said:
If you please tell me ho you solved this problem that will help me a lot.
Thanks in advance
Click to expand...
Click to collapse
I believe what he said is to remove the file from the firmware (archive) that you are flashing with Odin
sahriar said:
It just simply mount or dismount it.Says nothing.
Click to expand...
Click to collapse
Then I cant really tell :/ TWRP would tell if the cache partition would fail to mount (which would mean something is wrong)
Envoyé de mon SM-N900W8 en utilisant Tapatalk
bigmase23 said:
Any luck with this?
Click to expand...
Click to collapse
Okay, I succeeded by teamviewer to fix the issue.
It has something to do with the sboot.bin unable to flash.
From that point I got an idea. What if I rebuild the stock firmware but without the sboot.bin. Guess what, it worked.
Envoyé de mon SM-N900W8 en utilisant Tapatalk
Related
Hi guys, long time lurker here anyway i've always flashed my S4 with odin and not a single problem always flashed STOCK firmwares
but today i recently discovered a new firmware on the list for the GT-I9500 Exynos Octa (version) - this firmware to be in fact I9500ZNUCMI1
but now its bombed... it hanged and hanged at booting for 20 min then it shut it self off turned it back on 'the firmware encounter a problem' message popped up... i cannot go into recovery mode AT ALL (just download mode) so i thought i will flash my previous stock firmware known as I9500XXUBMG9 but now i cant even do that..... odin just gives me a god damn fail - FOR THE LOVE OF ANDROID HELP ME
- Kies is not running in the background
- USB connections are fine
- Cables are fine
So do i have to fear this is the end ? lol i cannot believe this happened to me on a STOCK firmware.... (lucky for me... all my stuff is backed up on sd)
Any help would be greatly appreciated
lethcore said:
Hi guys, long time lurker here anyway i've always flashed my S4 with odin and not a single problem always flashed STOCK firmwares
but today i recently discovered a new firmware on the list for the GT-I9500 Exynos Octa (version) - this firmware to be in fact I9500ZNUCMI1
but now its bombed... it hanged and hanged at booting for 20 min then it shut it self off turned it back on 'the firmware encounter a problem' message popped up... i cannot go into recovery mode AT ALL (just download mode) so i thought i will flash my previous stock firmware known as I9500XXUBMG9 but now i cant even do that..... odin just gives me a god damn fail - FOR THE LOVE OF ANDROID HELP ME
- Kies is not running in the background
- USB connections are fine
- Cables are fine
So do i have to fear this is the end ? lol i cannot believe this happened to me on a STOCK firmware.... (lucky for me... all my stuff is backed up on sd)
Any help would be greatly appreciated
Click to expand...
Click to collapse
If you can get into Download mode, all hope is not lost. Uninstall and resinstall drivers, Odin, etc. reboot.
Odin back to stock, immediately boot into stock recovery, wipe data, reboot.
Done.
donalgodon said:
If you can get into Download mode, all hope is not lost. Uninstall and resinstall drivers, Odin, etc. reboot.
Odin back to stock, immediately boot into stock recovery, wipe data, reboot.
Done.
Click to expand...
Click to collapse
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
lethcore said:
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
Click to expand...
Click to collapse
The good news is that Download mode is still working. AS long as that's the case, you can get it back. Just keep trying. Switch PCs, switch cables, switch ports, re download a different stock ROM, etc. do whatever it takes to try every variable you can think of.
Eventually, you'll find what's causing it and the ROM will flash successfully. When that happens, get immediately into recovery and wipe data.
(Remove the battery after it flashes, but it back in and hold vol-up+home+power.)
After the data wipe....
Reboot.
Like I said, Download mode means you can find a way to flash, but working with Odin to resolve these issues can sometimes be a PITA. I've had the same thing myself before. Just don't give up. Try to stay calm, and work your way through it. You'll get it eventually.
Edit: Just noticed that you flashed a CHINA firmware. (Why? ) You may be facing this issue because (I think) they use a different pit. There's a thread devoted to resurrecting the device with pit. Maybe check it out.
lethcore said:
Thx for reply
Still says FAIL when i try to flash I9500XXUBMG9 what am i doing wrong ?
rebooted laptop twice plug in S4 via usb says unknown device when in download mode but odin reconise it flash it and nothing happens on the screen then i get the big fat RED FAIL ............... AHHH
Click to expand...
Click to collapse
dont flash China or Hong kong firmwares.
please post odin progression
samersh72 said:
dont flash China or Hong kong firmwares.
please post odin progression
Click to expand...
Click to collapse
Nothing to post just says 'completed' but its failed.... i'll remember this next time stay away from china/hong kong firmwares...
im still tyring now and will let you guys/girls know how it pans out! wish me luck!
lethcore said:
Nothing to post just says 'completed' but its failed.... i'll remember this next time stay away from china/hong kong firmwares...
im still tyring now and will let you guys/girls know how it pans out! wish me luck!
Click to expand...
Click to collapse
INFO HERE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> persdata.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
lethcore said:
INFO HERE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> persdata.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
recovery is flashed, try to boot into it and make the wipe then re-flash stock, re-wipe.
if not, flash a custom recovery, format system, cache, re-flash stock, re-wipe
@donalgodon
Why ? well i got the I9500 in hong kong (im actually based in china now) (not Chinese though) thought i'll see some nice changes? but seems i fK'ed the phone.... pit? i haven't a clue man pit number? think i've KILLED HER... lol (i never knew the dangers of Chinese firmware) - wont be going down that route again.
@samersh72
Are you sure? i cannot get into 'recover' mode... the phone just hands at 'Firmware upgrade encounted an issue please select kies & try again
i canm only enter download mode.... when i try to enter recover mode it just flashes at the firmware message.
lethcore said:
@samersh72
Are you sure? i cannot get into 'recover' mode... the phone just hands at 'Firmware upgrade encounted an issue please select kies & try again
i canm only enter download mode.... when i try to enter recover mode it just flashes at the firmware message.
Click to expand...
Click to collapse
flash custom recovery,
if not see my signature for flashing right pit with the firmware
samersh72 said:
flash custom recovery,
if not see my signature for flashing right pit with the firmware
Click to expand...
Click to collapse
Well i just grabbed a I9500 pit file and have my stock firmware just add these 2 to odin and click start? that simple or ??
lethcore said:
Well i just grabbed a I9500 pit file and have my stock firmware just add these 2 to odin and click start? that simple or ??
Click to expand...
Click to collapse
yes, make sure that you are using the right pit, put it in "pit" window in odin, and the firmware in "pda", make sure "re-partition" is ticked, start.
samersh72 said:
yes, make sure that you are using the right pit, put it in "pit" window in odin, and the firmware in "pda", make sure "re-partition" is ticked, start.
Click to expand...
Click to collapse
Well you be happy to know
installed the previous firmware and that pit file for I9500 from your sig and everything seems well... booted correctly nothing lost all seems good to early to tell but will keep you informed !
THANK YOU!!!
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
mattish.91 said:
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
Click to expand...
Click to collapse
Check sammobile.com then firmware for ur phone. Have a nice day
Sent from my Phone.
Edit: or here http://www.sammobile.com/firmwares/2/
Repulsa said:
Check sammobile.com then firmware for ur phone. Have a nice day
Sent from my Phone.
Click to expand...
Click to collapse
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
mattish.91 said:
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
Click to expand...
Click to collapse
Download odin 3.09 then select PDA, and find the file you download now connect the one cable to your PC and press power+volume down to your phone until u reach download mode and connect the other cable to your phone and click start.
Edit: Dont root your device you might Void your warranty after updating.
mattish.91 said:
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
Click to expand...
Click to collapse
What u flashed is only for France Orange branded. They dont have 4.3 for others still
Repulsa said:
Download odin 3.09 then select PDA, and find the file you download now connect the one cable to your PC and press power+volume down to your phone until u reach download mode and connect the other cable to your phone and click start.
Edit: Dont root your device you might Void your warranty after updating.
Click to expand...
Click to collapse
Read this .. http://forum.xda-developers.com/showthread.php?t=2582135&page=2
---------- Post added at 02:12 AM ---------- Previous post was at 02:12 AM ----------
mattish.91 said:
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
Click to expand...
Click to collapse
Read this..... http://forum.xda-developers.com/showthread.php?t=2582135&page=2
If you do really want to upgrade after you read the upper report i can help you cause Odin and Heimdall are no more supported and you cant downgrade anymore to 4.2.2
So think about it twice
And please read here too http://forum.xda-developers.com/showpost.php?p=45666586&postcount=1 ^^
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
xenix96 said:
Read this .. http://forum.xda-developers.com/showthread.php?t=2582135&page=2
---------- Post added at 02:12 AM ---------- Previous post was at 02:12 AM ----------
Read this..... http://forum.xda-developers.com/showthread.php?t=2582135&page=2
If you do really want to upgrade after you read the upper report i can help you cause Odin and Heimdall are no more supported and you cant downgrade anymore to 4.2.2
So think about it twice
And please read here too http://forum.xda-developers.com/showpost.php?p=45666586&postcount=1 ^^
Click to expand...
Click to collapse
Hey mate Read this :Edit: Dont root your device you might Void your warranty after updating < its a warning
mattish.91 said:
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Bro Please remember if you update your phone to newest 4.3, there is no more chance for you to downgrade your system , and if you root/custom your phone / you will Void your Warranty , just like they said on i9506 thread to wait until someone make a custom rom in order NOT to void that warranty for your phone.
Repulsa said:
Hey mate Read this :Edit: Dont root your device you might Void your warranty after updating < its a warning
Bro Please remember if you update your phone to newest 4.3, there is no more chance for you to downgrade your system , and if you root/custom your phone / you will Void your Warranty , just like they said on i9506 thread to wait until someone make a custom rom in order NOT to void that warranty for your phone.
Click to expand...
Click to collapse
Yea. i got that, but now i can't use the phone so how do i reset it? kies doesnt work, and i can't find a proper 4.2.2 that i can flash with odin, root is not required atm...
mattish.91 said:
Yea. i got that, but now i can't use the phone so how do i reset it? kies doesnt work, and i can't find a proper 4.2.2 that i can flash with odin, root is not required atm...
Click to expand...
Click to collapse
Hello again , try here http://www.sammobile.com/firmwares/1/?model=GT-I9506&pcode=EVR#firmware Hope it helps and choose your country.
Repulsa said:
Hello again , try here http://www.sammobile.com/firmwares/1/?model=GT-I9506&pcode=EVR#firmware Hope it helps and choose your country.
Click to expand...
Click to collapse
Still can't download from those sources since they are too slow, can someone upload it somewhere else please? im allways getting interupted download...
mattish.91 said:
Still can't download from those sources since they are too slow, can someone upload it somewhere else please? im allways getting interupted download...
Click to expand...
Click to collapse
I cant try to download the file i have a 50/50 mbps and make a mirror for you but i need to know what file are you tring to download baseband, country , Carrier and such. have a nice day.
Repulsa said:
I cant try to download the file i have a 50/50 mbps and make a mirror for you but i need to know what file are you tring to download baseband, country , Carrier and such. have a nice day.
Click to expand...
Click to collapse
This is the file: http://samsung-updates.com/details/18144/Galaxy_S4_LTE-A/S800/GT-I9506/HTS/I9506XXUAMJ2.html the source is your's Thanks you'r awesome!
mattish.91 said:
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Yes, AP is correct. Try a different data cable.
Enviado desde mi GT-P7510 usando Tapatalk 2
mattish.91 said:
This is the file: http://samsung-updates.com/details/18144/Galaxy_S4_LTE-A/S800/GT-I9506/HTS/I9506XXUAMJ2.html the source is your's Thanks you'r awesome!
Click to expand...
Click to collapse
Hello again here is the 4.2.2 firmware for your GT-I9506 , Make sure to Follow the instruction. and hoping to fix your problem, Have a nice day.
Gt-19506 4.2.2 Firmware https://mega.co.nz/#!XV4wRZ6b!LEDB9WuyI9SLUjqDsPrlBhTRSo9z1Sz6uWRCiq74qE8
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons) in order to reach download mode.
- Connect phone and wait until you get a blue sign in Odin
- Add I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md 5 to AP
- Make sure re-partition is NOT ticked
- Click start button, and wait a few minutes.
-Your phone should automatically reboot after completion
-You can now disconnect your phone from computer .
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Repulsa said:
Hello again here is the 4.2.2 firmware for your GT-I9506 , Make sure to Follow the instruction. and hoping to fix your problem, Have a nice day.
Gt-19506 4.2.2 Firmware https://mega.co.nz/#!XV4wRZ6b!LEDB9WuyI9SLUjqDsPrlBhTRSo9z1Sz6uWRCiq74qE8
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons) in order to reach download mode.
- Connect phone and wait until you get a blue sign in Odin
- Add I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md 5 to AP
- Make sure re-partition is NOT ticked
- Click start button, and wait a few minutes.
-Your phone should automatically reboot after completion
-You can now disconnect your phone from computer .
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Click to expand...
Click to collapse
This is my result:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so this wasn't working, any idea? xD
mattish.91 said:
This is my result:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so this wasn't working, any idea? xD
Click to expand...
Click to collapse
You are trying to flash a stock 4.2.2 over a 4.3 knox bootloader!!!! If course you will get error!!!!
Since you have 4.3 knox bootlader, you only can flash stock 4.3 roms. Download the last update for your model from sammobile and reflash again with same process.
Enviado desde mi GT-I9500 usando Tapatalk 2
jaswinky said:
You are trying to flash a stock 4.2.2 over a 4.3 knox bootloader!!!! If course you will get error!!!!
Since you have 4.3 knox bootlader, you only can flash stock 4.3 roms. Download the last update for your model from sammobile and reflash again with same process.
Enviado desde mi GT-I9500 usando Tapatalk 2
Click to expand...
Click to collapse
im sorry, im totally lost and confused, what am i missing, there is only one 4.3 rom that is flashable throu odin and thats the french version and that should work in Sweden aswell, when i flash that rom i'm still getting that error, should i try to flash root before continuing? incase yes, which one? Im really grateful for all your help.
mattish.91 said:
im sorry, im totally lost and confused, what am i missing, there is only one 4.3 rom that is flashable throu odin and thats the french version and that should work in Sweden aswell, when i flash that rom i'm still getting that error, should i try to flash root before continuing? incase yes, which one? Im really grateful for all your help.
Click to expand...
Click to collapse
hello again , i did not know that you have a the newest bootloader for your phone and yet you requested a 4.2.2 anyways since your Knox void warranty is not 0x1 yet go ahead and send it back for repair , im sure they will fix this problem, since you did not void your warranty yet that's the best solution i can give you. or wait to someone here on xda know's how to fix this issue. have a nice day.
Repulsa said:
hello again , i did not know that you have a the newest bootloader for your phone and yet you requested a 4.2.2 anyways since your Knox void warranty is not 0x1 yet go ahead and send it back for repair , im sure they will fix this problem, since you did not void your warranty yet that's the best solution i can give you. or wait to someone here on xda know's how to fix this issue. have a nice day.
Click to expand...
Click to collapse
The problem is solvet simply flashed root, the only thing not working (so far) is keyboard xD and it is running 4.3
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Anybody? I need my phone back :S
chemell said:
Anybody? I need my phone back :S
Click to expand...
Click to collapse
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
spamtrash said:
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
Click to expand...
Click to collapse
But can I use another rom? I don't care if isn't a 4.2.2 rom because I need the phone again doesn't matter with which rom or android version.
If u can boot to recovery flash a custom rom then flash stock via odin
aayushkhajuria2842 said:
If u can boot to recovery flash a custom rom then flash stock via odin
Click to expand...
Click to collapse
I can't, I only got download mode...
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
aayushkhajuria2842 said:
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
Click to expand...
Click to collapse
Well it doesn't work, when I turn on the phone a black screen with a cellphone, a warning sign and a monitor appears and a text says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
With this screen I can only go into download mode but when I try recovery mode it just puts the screen black and back to the same text and pictures.
Another thing that worries me it's that I can't turn the phone off with the button, only if I pull the battery out.
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
aayushkhajuria2842 said:
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
Click to expand...
Click to collapse
I've already tried with the rom "I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5" (I believe it's stock rom) and get the odin error that appears in my first post...
Try some other firmware of you own region ......... 4.3 or 4.4 whichever u have for your region .......I think then u will nt get same error
chemell said:
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Click to expand...
Click to collapse
Hi, try to flash through kies emergency firmware recovery.
navdeepavi said:
Hi, try to flash through kies emergency firmware recovery.
Click to expand...
Click to collapse
Hi, I tried, but in Kies I can't get trough the "Connecting..." status so when I choose "Emergency firmware recovery" the list of devices appears empty.
I think u should try flashing some other stock firmware I hav had the prblm before
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
It should work I did the same thing but cant say anything
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
chemell said:
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
Click to expand...
Click to collapse
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
DELETED, procedure was for I9505 ONLY
you have to follow the procedure form this link instead.
Good luck.
spamtrash said:
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
You will need the PC with not faulty CPU, first.
Then, you have to use the PIT from here
Of course, you will need the Qualcomm drivers as well, from here or this one
Then, you have to follow the relatively simple procedure described here
That shall fix the corrupted bootloader, and I hope that you will not see the described there errors which would point to the hardware problem.
Good luck.
Click to expand...
Click to collapse
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Just an observation, you said you have no recovery right? So have you tried just flashing the tar of PhilZ recovery using Odin to get it back?
At least then you'll have a recovery again and can move forward with a custom ROM install
Sent from my GT-I9505 using XDA Premium HD app
lolo9393 said:
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Click to expand...
Click to collapse
right. the correct one provided.
i dont know whats going on but i cant root G900FXXU1BOB7 also cant install twrp or cwm any ideas anyone
Yeah, I lost root after flashing the standard BOB7 firmware.
Had to re-root my phone using these instructions.
Are you flashing with Odin?
If so, how are you getting into download mode (DO NOT USE THE 4-WAY REBOOT OPTION). You must turn off your phone (and some people recommend removing the battery, but I have never had to do that). Then turn the phone on, by pushing 'home', 'volume down' and power.
Flash the 'CF-Auto-Root-klte-kltexx-smg900f.tar.md5' (or whichever is the appropriate version for your phone. I am using the SM-G900F, which is kltexx but yours might be a different model) using 'AP' (if odin 3.09) or 'PDA'.
Edit: Meant to add, download the latest auto-root package from chainfire's link above (it has a compatible version of SuperSU that works with android 5.0). If you are using an old version, it may not work with android 5. The latest version is 2.45, but I think 2.43 and up should work.
ruskin0611 said:
Yeah, I lost root after flashing the standard BOB7 firmware.
Had to re-root my phone using these instructions.
Are you flashing with Odin?
If so, how are you getting into download mode (DO NOT USE THE 4-WAY REBOOT OPTION). You must turn off your phone (and some people recommend removing the battery, but I have never had to do that). Then turn the phone on, by pushing 'home', 'volume down' and power.
Flash the 'CF-Auto-Root-klte-kltexx-smg900f.tar.md5' (or whichever is the appropriate version for your phone. I am using the SM-G900F, which is kltexx but yours might be a different model) using 'AP' (if odin 3.09) or 'PDA'.
Edit: Meant to add, download the latest auto-root package from chainfire's link above (it has a compatible version of SuperSU that works with android 5.0). If you are using an old version, it may not work with android 5. The latest version is 2.45, but I think 2.43 and up should work.
Click to expand...
Click to collapse
I got the Sm-G900F and tried the chainfire's autoroot and got failed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Are you using the G900FXXU1BOB7 firmware?
You have to flash the latest TWRP via Odin. Afterwards install the latest superSU through TWRP.
Gesendet von meinem SM-G900F mit Tapatalk
Dissgro said:
You have to flash the latest TWRP via Odin. Afterwards install the latest superSU through TWRP.
Gesendet von meinem SM-G900F mit Tapatalk
Click to expand...
Click to collapse
Guys help me. I have the twrp installed. Su installed it says superuser enabled. But if i want to use any root app like adaway or titanium backup it doesn't give me a choice to grant. It just stops there. I tried to reflash the cf-autoroot, but didn't work. Anyone can help me? Thanks in advance.
twrp fails too
Hollowlife said:
twrp fails too
Click to expand...
Click to collapse
My problem was I couldn't "Wipe / Advanced Wipe" with TWRP it gave me a bunch of errors, so I tried "Format Data" and that worked. Executed Wipe after, reinstalled G900FXXU1BOB7 , latest TWRP (2.8.5.0), followed by Root
I can't root or install TWRP in g900fxxu1bob7 firm also
Odin always gives me that error :crying:
hi,
i flashed cm13 from here:
http://forum.xda-developers.com/not...-cyanogenmod-13-semi-official-builds-t3259878
then i went back and tried to flash N910CXXU2COJ5_N910COXA2COJ5_XEO via Odin, which was my rom before flashing to cm13
now i am facing a bootloop at "samsung Powered By Android Screen"
i also tried N910CXXU1COI4_N910COXA1COI4_XEO, N910CXXU1COH4_N910COXA1COH4_XEO, i get Fail message from Odin
i redownloaded N910CXXU2COJ5_N910COXA2COJ5_XEO, thinking maybe the file was corrupted during my first download, but still same problem
please help, also please provide me a link to download bootloader and modem
thank you in advance
Update
i downloaded a bootloader and modem from this link:
http://forum.xda-developers.com/note...-team-t3031712 2nd post
but everytime i try to odin the bootloader using BL i get a FAIL messsage below:
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dont try to flash any bootloader below COJ5 as downgrading isn't possible.
Did you do a factory reset when you flashed COJ5 ?
Styrke said:
Dont try to flash any bootloader below COJ5 as downgrading isn't possible.
Did you do a factory reset when you flashed COJ5 ?
Click to expand...
Click to collapse
Thank you for your reply,
Yes, i did a factory rest after flashing COJ5
FYI, i also tried many roms which are based on COJ5 but no luck
The only rom i can flash now is CM13 from here
http://forum.xda-developers.com/not...-cyanogenmod-13-semi-official-builds-t3259878
Your thanks counter was 499, glad to make it 500
bobalyafeai09 said:
Thank you for your reply,
Yes, i did a factory rest after flashing COJ5
FYI, i also tried many roms which are based on COJ5 but no luck
The only rom i can flash now is CM13 from here
http://forum.xda-developers.com/not...-cyanogenmod-13-semi-official-builds-t3259878
Your thanks counter was 499, glad to make it 500
Click to expand...
Click to collapse
If you can boot cm while not stock I would suspect the kernel.
Make sure that the zipped custom rom you tried to flash by recovery has the stock kernel (boot.img) inside in some folder other than "system".And always wipe data/factory reset when coming from non stock.
If it still doesn't help then Im afraid I'll be out of solutions cause I haven't had any experience with locked bootloaders.
Styrke said:
If you can boot cm while not stock I would suspect the kernel.
Make sure that the zipped custom rom you tried to flash by recovery has the stock kernel (boot.img) inside in some folder other than "system".And always wipe data/factory reset when coming from non stock.
If it still doesn't help then Im afraid I'll be out of solutions cause I haven't had any experience with locked bootloaders.
Click to expand...
Click to collapse
It didn't help
Thank you for trying bto help
bobalyafeai09 said:
It didn't help
Thank you for trying bto help
Click to expand...
Click to collapse
Any luck? I'm facing the same problem.
ticiano_arraes said:
Any luck? I'm facing the same problem.
Click to expand...
Click to collapse
So far no luck, will post here if i find anything,
Please let me know if you fine a solution.
bobalyafeai09 said:
So far no luck, will post here if i find anything,
Please let me know if you fine a solution.
Click to expand...
Click to collapse
Hey, try flashing cm13 again and see if your serial number and IMEI are still showing.
Refer to this http://forum.xda-developers.com/showpost.php?p=64327408&postcount=213