Database Users

[Q] HELP!!! Spent lot time but still Unable to flash HYPERION rom

Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....

If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.

LilSasa said:
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
Click to expand...
Click to collapse
okay i will try it, anyway what are other compilation of CMW?

AldRezaine said:
okay i will try it, anyway what are other compilation of CMW?
Click to expand...
Click to collapse
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium

AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3

first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly

anasdcool71 said:
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Still not working. I already flashed back to stock rom but failed.
vangeodee said:
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
Click to expand...
Click to collapse
It works but when I install Link2Sd app my phone reboot itself and stuck in the boot screen.
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
I will give it try and see if it works..

I don't think your supposed to use Link2SD?

Ohhhh leave it try to flash ussrv6 it's awesome man very smooth fast and stable than hperion...
Sent from my GT-S5360 using xda premium

Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....

AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
wipe dalvik cache

AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)

Ameya0909 said:
wipe dalvik cache
Click to expand...
Click to collapse
Already did sir a million times but still problem persist..
vangeodee said:
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Click to expand...
Click to collapse
Thanks sir for sharing your knowledge but I think already know about it...

AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)

yehs14 said:
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
Click to expand...
Click to collapse
What kernel Im going to flash...? HYPERION has built-in kernel already..

[Q] cant install Hyperion

Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too

Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
had the same problem before. ive tried 4 times but the result was the same.. i get stuck at boot logo. then i flashed ddle1 via odin and installed hyperion. fisrt try success... try to flash different baseband.

Thanks for the suggestion.
Sent from my GT-S5360 using xda premium

Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
thy this procedure dude.
go to cmw then go to mounts and storage the format system, data, and cache after that mount system, data and cache. then go back then wipe data and cache then flash the room then wipe data only then reboot. if it is still not booting go to stock recovery then wipe data and cache then flash the rom. after flashing wipe data only don't wipe cache. then reboot. it take 3 minutes to boot for first time. :good:

just flash from stock and evrything will be good
Sent from my GT-S5360 using xda app-developers app

you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how

deathnotice01 said:
you probably did'nt do the instructions correctly,
try reflashing to stock,
use CWM recovery and mount system before installing,
search on how
Click to expand...
Click to collapse
I will try the mount system.

Give this a try...
Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this....
1. install repencis repencis rom. after scanning, boot recovery and install hyperion Rom.
2. in recovery, wipe data and cache and select install zip from sd and select hyperion zip.
3. enjoy...
work with me all the time... Hope work with you too. good luck.

Moshiro said:
Hi, I've try 3 times installing Hyperion ROM but I cannot do it. I use the recommended basebrand.. Need help.. I've tried any ROM but I cannot install any ROM too
Click to expand...
Click to collapse
try this:
1) flash back stock rom DLXF1/DLXF2 via ODIN
2) boot via CWM
3) do wipe data/reset(2x), wipe cashe partition(2x)
4) go to ADVANCED
5) wipe Dalvik Cashe
6) go back
7) install zip from sd
8) choose zip from sdcard
9) select the HYPERION ROM zip
OR if it still stuck on boot logo
1) flash back to stock rom
2) ROOT YOUR PHONE
then do steps #2 to #9
That works for me :good::good:
Goodluck!

Stuck in a bootloop!

Just installed Hyperion via Clockwork Mode and I am stuck in a bootloop, could I get some help with this?

Install another rom or the same rom
By reading the installation instruction properly
Sent from my GT-S5360 using xda premium

flash stock Rom using Odin then flash Hyperion again properly or another Rom
This is how to flash stock Rom via Odin
http://forum.xda-developers.com/showthread.php?t=1465800
So 2 android phones walk into a bar

At first i also have bootloops, hmmm try to flash again the same ROM
But this time wipe data/cache in CWM and then boot into recovery then wipe data/cache again then flash

Boncey said:
Just installed Hyperion via Clockwork Mode and I am stuck in a bootloop, could I get some help with this?
Click to expand...
Click to collapse
*flash a stock rom
*wipe ur ext partition if u have it (using link2sd)
*then flash Hiperion
oh, it's you again u made it.

*flash with stock rom using Odin
*flash with CWM that Hyperion (read the instruction carefully on the Hyperion Thread)
goodluck

Did all of that before you guys said, still gives me a bootloop, do I need to root my phone? But, when I root it I can't mount /system or /data or the other one

Boncey said:
Did all of that before you guys said, still gives me a bootloop, do I need to root my phone? But, when I root it I can't mount /system or /data or the other one
Click to expand...
Click to collapse
use another cwm or try cwm_bla_bla.zip

Link meh?

Boncey said:
Link meh?
Click to expand...
Click to collapse
i dont have a link but use the xda search botton it will help u a lot.good luck.

Still nothing :l

STEPS TO FLASH HYPERION (worked for me 100%)
- Flash stock rom via odin
- Reboot and go to CWM
- Clear Data/Reset and Cache
- Mount System/Sdcard/Data/Cache, (Sometimes Data/Cache can't be mounted it is OKAY)
- Flash Hyperion
- DO NOT REBOOT YET
- Go to Advanced
- Boot to Recovery
- Clear Data
- Clear Cache
- Reboot
Try it
Sent from my GT-S5360 using xda app-developers app

Make sure you're in a stock kernel first.

@boncey
Try the instruction provided by jeannuel's
Its working....good
Sent from my GT-S5360 using xda premium

Can't flash JellyBlast ROM

I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2

Mo0s said:
I've tried twice, first time it went blank on boot up and I could only here tge boot sound. The second time it got stuck at the Samsung Galaxy Y logo.... I want this ROM ao bad. My phone has all tge requirements: rooted, has stock kernel etc.... And I follwed EVERY step correctly... What is the problem?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here

tjsgy said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
Done.... Still stuck the Gakaxy Y logo
Sent from my GT-S5360 using Tapatalk 2

Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app

devilrulz4ever said:
Before wiping data in CWM
Go to mounts and storage>check if "unmount system" is there. If its "mount system" select it and press the centre key which wil turn it to "unmount system".
Also wipe data and cache in stock recovery before going to CWM recovery.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Ok, can you please post an alternative link for the rom. I'm having problems downloading from the Mediafire link
Sent from my GT-S5360 using Tapatalk 2

http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!

Cool.yash17 said:
http://www.mediafire.com/?m3cbyliuiek3cu3
Here was link Dude ...!!
Dont Waste Ur Time In Saying Thanks
Just Press It..!!
Click to expand...
Click to collapse
Does this one work?
Sent from my GT-S5360 using Tapatalk 2

I can flash jellyblast but im one the gt-5360T
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast

WEAREBORG2913 said:
can someone please explain how i can keep the autorotation from stock rom when i flash jellyblast
Click to expand...
Click to collapse
Auto rotation is already present in Jellyblast rom u can toggle it from status bar easily

funnypharmacist said:
Flash Stock ROM via ODIN (Let me know if you dont know what it is)
Put the ROM zip and Clockworkmod in the root of your SD card
Boot into Recovery(Three button combo)
Select apply update
Select the cwm file
Wipe data/factory reset
Wipe cache
Go to advanced
Wipe Dalvik cache
then select install zip from sd card
choose zip from SD card
let it install
Reboot
Report back here
Click to expand...
Click to collapse
I have the same problem and I followed the instructions on page 1 of the Jellyblast ROM exactly, also this one. After that I tried different ways with different CWM, choose an older version of the rom, reinstall Kuro Kernel after flashing Rom, delete second partition (ext2)... But I always get the bootloop.
Edit:
Solved: I made a stupid mistake. I chose on the download page the Update 5, because i thought it's the full ROM with update 5. Because of the green colour of the ROM download link, i didn't recognize that it's a link.

Help

I bricked my phone when i try to install android 4.4 kitkat. Can anyone show me how to unbrick it? or i just have to buy a new phone?

Mike Tran said:
I bricked my phone when i try to install android 4.4 kitkat. Can anyone show me how to unbrick it? or i just have to buy a new phone?
Click to expand...
Click to collapse
You dont have to buy a new phone! Flash the original stock firmware using odin.. follow this guide by marcussmith2626.

marcusflint said:
You dont have to buy a new phone! Flash the original stock firmware using odin.. follow this guide by marcussmith2626.
Click to expand...
Click to collapse
After I post this thread I rebooted my phone and suddenly i work (with android 4.4 layout which i have installed earlier and bricked my phone). But when i put SIM card in it, it can't startup, stuck at the welcome and keep rebooting. What should i do? Flash the original stock firmware?

Mike Tran said:
After I post this thread I rebooted my phone and suddenly i work (with android 4.4 layout which i have installed earlier and bricked my phone). But when i put SIM card in it, it can't startup, stuck at the welcome and keep rebooting. What should i do? Flash the original stock firmware?
Click to expand...
Click to collapse
so you are stuck on bootloop.. what rom are you on ?.. it can be a kernel problem too, so give some more details

marcusflint said:
so you are stuck on bootloop.. what rom are you on ?.. it can be a kernel problem too, so give some more details
Click to expand...
Click to collapse
Here are two link i downloaded from:
Kernel: https://www.dropbox.com/s/mtufgizocf5s04k/CyanogenMod Kernel.zip
Rom : http://www.mediafire.com/download/kl99v87c7w9zi7o/NewExperienceKitKatSpecialEdition_v1.0.zip

Mike Tran said:
Here are two link i downloaded from:
Rom: https://www.dropbox.com/s/mtufgizocf5s04k/CyanogenMod Kernel.zip
Kernel: http://www.mediafire.com/download/kl99v87c7w9zi7o/NewExperienceKitKatSpecialEdition_v1.0.zip
Click to expand...
Click to collapse
I think the rom is not installed correctly.. try installing it again by doing these steps..
1.Install the stock rom and then install percy_g2 CM #2 kernel via ODIN
2.After completion switch of phone and..go to recovery (press volume up+ home + power)
3.Go to mounts and storage and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount system,data,cache and sd card.
6.Go to install zip>choose zip and select the rom
7.Wait for the installation to get completed.
8.After the installation is completed,go back and wipe data (don't wipe the cache partition this time)
9.Select 'Reboot system now'
10.Wait for the rom to get booted

marcusflint said:
I think the rom is not installed correctly.. try installing it again by doing these steps..
1.Install the stock rom and then install percy_g2 CM #2 kernel via ODIN
2.After completion switch of phone and..go to recovery (press volume up+ home + power)
3.Go to mounts and storage and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount system,data,cache and sd card.
6.Go to install zip>choose zip and select the rom
7.Wait for the installation to get completed.
8.After the installation is completed,go back and wipe data (don't wipe the cache partition this time)
9.Select 'Reboot system now'
10.Wait for the rom to get booted
Click to expand...
Click to collapse
Thank, i'll try that

marcusflint said:
I think the rom is not installed correctly.. try installing it again by doing these steps..
1.Install the stock rom and then install percy_g2 CM #2 kernel via ODIN
2.After completion switch of phone and..go to recovery (press volume up+ home + power)
3.Go to mounts and storage and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount system,data,cache and sd card.
6.Go to install zip>choose zip and select the rom
7.Wait for the installation to get completed.
8.After the installation is completed,go back and wipe data (don't wipe the cache partition this time)
9.Select 'Reboot system now'
10.Wait for the rom to get booted
Click to expand...
Click to collapse
I'm sorry i cause i wrote wrong, pls read again the link i gave you. Also, the link you gave me was to download kernel, wasn't it? and install via Odin mean i have to connect my phone with pc and switch to download mode, my phone work with Odin3-v1.85

Mike Tran said:
I'm sorry i cause i wrote wrong, pls read again the link i gave you. Also, the link you gave me was to download kernel, wasn't it? and install via Odin mean i have to connect my phone with pc and switch to download mode, my phone work with Odin3-v1.85
Click to expand...
Click to collapse
Yes install the kernel that way.. then install your kitkat Rom through cwm recovery like i said in the steps