Database Users

bricked!!!! Qualcomm HS-USB QDLoader 9008

hi
Sorry for my English
I wanted to root my phone but made ​​a mistake somewhere.
now the phone is always off. when connected to the computer, program RSD see him as QHSUSB_DLOAD; computer see him as Qualcomm HS-USB QDLoader 9008
RSD don`t flasing(The phone failed to switch to fastboot mode)(FAIL) flasing cabl dont helped.
How reestablished bootloader

nobody knows how to help me?

It appears that you have a corrupt boot loader and unfortunately we do not have any of the files available to us that would be needed to fix your phone.
They would be the proprietary binaries and low level boot images from Qualcomm for flashing to a new board at the factory.
We have such repair kits for some earlier OMAP based devices but I have not heard of or seen any such files for the Qualcomm S4 devices, sorry.

If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.

kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
how?

same problem
i have the same problem and the same brick. Can anyone help us?:crying:

+ to brick reason
Ral126 said:
i have the same problem and the same brick. Can anyone help us?:crying:
Click to expand...
Click to collapse
You forget, thats you also try to flash MIUI!

St.Noigel said:
You forget, thats you also try to flash MIUI!
Click to expand...
Click to collapse
Yes) I tried))) But for the beginning i need to reestablished bootloader.

ASUS PadFone 2 QHSUSB_DLOAD error
I've an ASUS Padfone 2 with the same error. Looks like it's kind of easy to get these Qualcomm devices into this f*cking issue
My case is detailed here: http://forum.xda-developers.com/showthread.php?t=2220775

kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
Good evening,
I bricked the Innos D9 because I installed 2 new roms .........
I first stalled the DNS and it was a very nice rom but I was not 100% happy ...........than I installed the Cloudfone rom and this was very bad..........than I wanted to go back to the DNS rom and I got the same problem as yours.
I searched for a solution and I found a video on YouTube ..." Restore Acronis Backup on CloudFone Thrill 430X (Innos D9) " and after this experiment my Innos D9 is totally dead.....it isn't recognized by the computer ....not even by clicking or holding any button ..........when I connect the USB to my laptop I can only hear the sound that something has been connected to the laptop ........but nothing is visible.
any help to unbrick my phone?

One thing you could try is sending a message over to Josh at mobiletechvideos.com and see if he can help. It looks like they offer JTAG repairs for hard bricks(link).
Note: I don't work for mobiletechvideos or anything. I just had my Samsung Focus power button repaired by them a couple weeks ago and they did a pretty nice job.

I've got same problem with Asus Padfone A66.
I installed the qualcomm drivers, and QPST program is see my phone, but i have no idea howto use this program, or howto convert image files to (proper) .hex format, or howto build needed files. My cpu is MSM8260 and QPST see my phone as Q/QCP-XX (Download). And maybe I need for a proper MPRG8260.hex and aml, mbm files for flashing. so QPST sjust throwing error, ahnd happen nothing.

http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3

Hello everyone, I'm having the same problem .
Someone found a solution to this problem?
I have a RAZR HD .
Thank's

[Q] Install qhsusb qualcomm drivers

I want to install drivers for my phone qhsusb Qualcomm S4 Galaxy I9505 and do not know how. Can someone help me?

milly62 said:
I want to install drivers for my phone qhsusb Qualcomm S4 Galaxy I9505 and do not know how. Can someone help me?
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23060877489998845
Hey! Download the driver (this is 64bit version), extract and chose Install on right click on the *.ini file. Might just copy it to the /system32 ... should work.

Galaxy

Galaxy

claudiudanila said:
Hi everyone, I have a big problem on my phone (SM-N910F) does not start even in download / recovery mode, the screen is off. I think it's a "hard brick."
All I can see now in device manager is Qualcomm HS-USB QDLoader 9008 (COM7).
Is there any possibility to bring my phone back into download mode? Please help me !!!
Click to expand...
Click to collapse
Well lets start by telling us what you did to the phone to get you where you are. And, what model is the N910F?
EDIT: is the "F" version for Europe?

Galaxy

What happens when you try to enter download mode?

Galaxy

claudiudanila said:
Thank you, I own a Samsung Galaxy Note 4, model SM-N910F for Europe.
I used a zip package to run a script via TWRP. The script was erasing some applications(bloatware) from rom. After the script was executed, I forgot to execute a wipe data/cache/factory and my phone was started to boot. After touchwiz was initialised, 3 seconds later my phone froze. Then I removed the battery and...here I am.
My computer is able to detect the phone(i can see in device manager Qualcomm HS-USB QDLoader 9008 (COM7) but Odin is unable to see any phone connected.
I've already tried an USB JIG but nothing...
I found an interesting thing, I can connect to the phone using QPST, please find attached a screenshot(Capture1.png). Here I found an option named Software Download. I've clicked this option and i can see: COM7 Phone in Download Mode. Please look at the attached picture Capture3. Here I can see two options: Phone Image and Boot image. Can I upload some specific boot image to unbrick my phone?
Click to expand...
Click to collapse
Not sure I can help you but you may be using a corrupted program, QPST. See here: http://forum.xda-developers.com/showthread.php?t=2263391
When the phone is hooked up to the charger do you get a charging indication on the LED? Is the battery charged or at least have some charge left on it?
Have you removed the battery and then tried to boot. If not give that a try. The only other recommendation I can offer since I've never used QPST and I don't know what script you ran to remove bloatware so I can't tell what it potentially did is to try to recover your phone through Kies (Samsung software). I seldom recommend Kies and have never used it myself since I have an unlocked bootloader, but if Kies recognizes your phone there may be hope. Good luck.

claudiudanila said:
Nothing...the screen is black, i cannot see anything, also Odin is unable to see the phone.
Click to expand...
Click to collapse
well it is weird that QPST shows you are in download mode but odin cannot see it.

Galaxy

Galaxy

claudiudanila said:
No led..no indicator..nothing...Kies is also unable to see the phone.
Click to expand...
Click to collapse
Sorry claudiudanila, based on what you've told us I have no other ideas.

claudiudanila said:
Hi everyone, I have a big problem on my Galaxy Note 4 phone (SM-N910F) does not start even in download / recovery mode, the screen is off. I think it's a "hard brick."
All I can see now in device manager is Qualcomm HS-USB QDLoader 9008 (COM7).
Is there any possibility to bring my phone back into download mode? Please help me !!!
Click to expand...
Click to collapse
I hope you are using windows pc not mac for odin.

jdomadia said:
I hope you are using windows pc not mac for odin.
Click to expand...
Click to collapse
Judging by the screenshots i would say its windows.
That said, I don't think I have any more ideas to add to the solutions already suggested.
You might wanna try your luck with z3x box or visit samsung service center.. that's all there's left to add.

maksharma231 said:
Judging by the screenshots i would say its windows.
That said, I don't think I have any more ideas to add to the solutions already suggested.
You might wanna try your luck with z3x box or visit samsung service center.. that's all there's left to add.
Click to expand...
Click to collapse
Using windows in mac parallel creates problem for flashing.

Galaxy

qhsusb_dload

My s4 does not boot at all, i can´t get to recovery mode or download mode. Odin does not recognizes it but if i plug it in the pc it says it found a device called
Qualcomm qhsusb_dload
any help?

From my experience only a jtag can fix a device in that state it's pretty much hard bricked sorry could u tell me how u did this to your device did u flash a rom or kernel from a different phone?

GRGC25 said:
My s4 does not boot at all, i can´t get to recovery mode or download mode. Odin does not recognizes it but if i plug it in the pc it says it found a device called
Qualcomm qhsusb_dload
any help?
Click to expand...
Click to collapse
Don't know if this would help, but interesting read.

creepyncrawly said:
Don't know if this would help, but interesting read.
Click to expand...
Click to collapse
it might work in theory, but.. i have no phone to get those files out of :/

Sm-n910w8 unbrick

Thank you for clicking my post, and taking an interest in either helping or contributing to a solution for my problem. Firstly flattery, I think what all you who contribute here do, is absolutely great! If I find a solution I will post it here for everyone else to benefit from. I'll make it quick...
Device: Samsung Note 4 SM-N910W8 (Canadian Version)
OS: Stock (unsure which version, was NOT rooted or anything)
Issue: Failed OS upgrade on Samsung Kies. Won't boot to download mode or recovery mode. No LED, No Charge Icon.
Log: Computer recognizes phone as QHSUSB_DLOAD or QHSUSB_BULK. Installed some qualcomm drivers NOW computer sees device as Qualcomm HS-USB QDLoader 9008 (COM 25). QPST and QFill recognize device in download mode. I would require step by step instructions of how to flash using these tools as my current knowledge of them is quite limited. From what I understand you can't JTAG the Note 4, but you can load a debrick image onto a 32/63GB microSD (that's based on my current research). So either using QFil or a microSD as a solution? I do have another note 4 (SM-N910W8) and although I don't want to...if it's my only choice and someone can provide me the steps/resources I can root it and use it to create a de-brick image (which I would then post here for the benefit of everyone). I think I can handle rooting it, but a link to guide would be appreciated (as I will want to unroot if after as well). Again I'de prefer if someone else with an already rooted SM-N910W8 could share a debrick image but I'll make one if I have to.
Your help is much appreciated. I'd be glad to provide a meager donation to whomever can provide a solution & resources.
Thanks,
TEXDASR

By any chance did you happen to get a N910W8 image? I am on Bell and am currently hard bricked looking around for one.
TEXDASR said:
Thank you for clicking my post, and taking an interest in either helping or contributing to a solution for my problem. Firstly flattery, I think what all you who contribute here do, is absolutely great! If I find a solution I will post it here for everyone else to benefit from. I'll make it quick...
Device: Samsung Note 4 SM-N910W8 (Canadian Version)
OS: Stock (unsure which version, was NOT rooted or anything)
Issue: Failed OS upgrade on Samsung Kies. Won't boot to download mode or recovery mode. No LED, No Charge Icon.
Log: Computer recognizes phone as QHSUSB_DLOAD or QHSUSB_BULK. Installed some qualcomm drivers NOW computer sees device as Qualcomm HS-USB QDLoader 9008 (COM 25). QPST and QFill recognize device in download mode. I would require step by step instructions of how to flash using these tools as my current knowledge of them is quite limited. From what I understand you can't JTAG the Note 4, but you can load a debrick image onto a 32/63GB microSD (that's based on my current research). So either using QFil or a microSD as a solution? I do have another note 4 (SM-N910W8) and although I don't want to...if it's my only choice and someone can provide me the steps/resources I can root it and use it to create a de-brick image (which I would then post here for the benefit of everyone). I think I can handle rooting it, but a link to guide would be appreciated (as I will want to unroot if after as well). Again I'de prefer if someone else with an already rooted SM-N910W8 could share a debrick image but I'll make one if I have to.
Your help is much appreciated. I'd be glad to provide a meager donation to whomever can provide a solution & resources.
Thanks,
TEXDASR
Click to expand...
Click to collapse