hi
Sorry for my English
I wanted to root my phone but made a mistake somewhere.
now the phone is always off. when connected to the computer, program RSD see him as QHSUSB_DLOAD; computer see him as Qualcomm HS-USB QDLoader 9008
RSD don`t flasing(The phone failed to switch to fastboot mode)(FAIL) flasing cabl dont helped.
How reestablished bootloader
nobody knows how to help me?
It appears that you have a corrupt boot loader and unfortunately we do not have any of the files available to us that would be needed to fix your phone.
They would be the proprietary binaries and low level boot images from Qualcomm for flashing to a new board at the factory.
We have such repair kits for some earlier OMAP based devices but I have not heard of or seen any such files for the Qualcomm S4 devices, sorry.
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
how?
same problem
i have the same problem and the same brick. Can anyone help us?:crying:
+ to brick reason
Ral126 said:
i have the same problem and the same brick. Can anyone help us?:crying:
Click to expand...
Click to collapse
You forget, thats you also try to flash MIUI!
St.Noigel said:
You forget, thats you also try to flash MIUI!
Click to expand...
Click to collapse
Yes) I tried))) But for the beginning i need to reestablished bootloader.
ASUS PadFone 2 QHSUSB_DLOAD error
I've an ASUS Padfone 2 with the same error. Looks like it's kind of easy to get these Qualcomm devices into this f*cking issue
My case is detailed here: http://forum.xda-developers.com/showthread.php?t=2220775
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
Good evening,
I bricked the Innos D9 because I installed 2 new roms .........
I first stalled the DNS and it was a very nice rom but I was not 100% happy ...........than I installed the Cloudfone rom and this was very bad..........than I wanted to go back to the DNS rom and I got the same problem as yours.
I searched for a solution and I found a video on YouTube ..." Restore Acronis Backup on CloudFone Thrill 430X (Innos D9) " and after this experiment my Innos D9 is totally dead.....it isn't recognized by the computer ....not even by clicking or holding any button ..........when I connect the USB to my laptop I can only hear the sound that something has been connected to the laptop ........but nothing is visible.
any help to unbrick my phone?
One thing you could try is sending a message over to Josh at mobiletechvideos.com and see if he can help. It looks like they offer JTAG repairs for hard bricks(link).
Note: I don't work for mobiletechvideos or anything. I just had my Samsung Focus power button repaired by them a couple weeks ago and they did a pretty nice job.
I've got same problem with Asus Padfone A66.
I installed the qualcomm drivers, and QPST program is see my phone, but i have no idea howto use this program, or howto convert image files to (proper) .hex format, or howto build needed files. My cpu is MSM8260 and QPST see my phone as Q/QCP-XX (Download). And maybe I need for a proper MPRG8260.hex and aml, mbm files for flashing. so QPST sjust throwing error, ahnd happen nothing.
http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3
Hello everyone, I'm having the same problem .
Someone found a solution to this problem?
I have a RAZR HD .
Thank's
I'm a beginner, :angel:
In the post http://forum.legija.net/showthread....g-galaxy-S4-(i9505-and-similar)-via-USB-Cable author says you have to install QHUSB Qualcomm drivers
Because I'm a beginner I would like to know how to install drivers Qualcomm QHUSB.
I would like someone to make a guide (step by step) how to Boot repair Samsung galaxy S4 (i9505 and similar) via USB Cable.
Again, I'm a beginner.
Can someone help me?
milly62 said:
I'm a beginner, :angel:
In the post http://forum.legija.net/showthread....g-galaxy-S4-(i9505-and-similar)-via-USB-Cable author says you have to install QHUSB Qualcomm drivers
Because I'm a beginner I would like to know how to install drivers Qualcomm QHUSB.
I would like someone to make a guide (step by step) how to Boot repair Samsung galaxy S4 (i9505 and similar) via USB Cable.
Again, I'm a beginner.
Can someone help me?
Click to expand...
Click to collapse
Did you ever get this taken care of?
tornamac04 said:
Did you ever get this taken care of?
Click to expand...
Click to collapse
See here: http://forum.xda-developers.com/showthread.php?t=2226445
Hello N9002 Users,
I was trying to work on changing my aboot.mbn file with one that someone modified to remove the china unicom logo, while doing that, I apparently bricked my phone. It currently has the following symtoms:
- No light while charging
- Won't Boot
-Tried following this XDA thread for the N9005 to no avail:
http://forum.xda-developers.com/showthread.php?t=2720203
I was wondering if someone could make a debrick.img of their n9002 and I can try that? It was last running on version 4.4.2; firmware N9002ZNUFNI4.
Instructions on how to create image is here:
http://forum.xda-developers.com/showthread.php?t=2625332
I plug it into Windows and it shows up as QHSUSB_BULK and after installing the qualcomm drivers, shows up as Qualcomm HS-USB QDLoader 9008.
I'm not sure what else to do. If can somebody assist or know how to fix it? it may help others also.
thanks
Monkichi57 said:
Hello N9002 Users,
I was trying to work on changing my aboot.mbn file with one that someone modified to remove the china unicom logo, while doing that, I apparently bricked my phone. It currently has the following symtoms:
- No light while charging
- Won't Boot
-Tried following this XDA thread for the N9005 to no avail:
http://forum.xda-developers.com/showthread.php?t=2720203
I was wondering if someone could make a debrick.img of their n9002 and I can try that? It was last running on version 4.4.2; firmware N9002ZNUFNI4.
Instructions on how to create image is here:
http://forum.xda-developers.com/showthread.php?t=2625332
I plug it into Windows and it shows up as QHSUSB_BULK and after installing the qualcomm drivers, shows up as Qualcomm HS-USB QDLoader 9008.
I'm not sure what else to do. If can somebody assist or know how to fix it? it may help others also.
thanks
Click to expand...
Click to collapse
I have that same problem. Please help me.
my phone's model n900p
From 2014.
You are trying to change boot image ??
I Use Flashfire App And Install N9005XXUGBOB6 Wrong Firmware After Install Firmware My Device Hard brick No Downloade Mode And No Recovery Mode No Power Up My Device Connect Pc Show HS USB QDLOADER 9008 Plz Help How To Recover My Device
GALAXY 12345 said:
I Use Flashfire App And Install N9005XXUGBOB6 Wrong Firmware After Install Firmware My Device Hard brick No Downloade Mode And No Recovery Mode No Power Up My Device Connect Pc Show HS USB QDLOADER 9008 Plz Help How To Recover My Device
Click to expand...
Click to collapse
The N9005 is an Exynos SOC chip. The VZW Note3 (SM-N900V) uses a completely different SOC - a Qualcomm 8974.
What you did got a similar result as to what you might expect if you flashed the firmware from a digital camera - or a vacuum cleaner - on to your phone. 100% certainty of disaster.
Take it in to a Verizon store and see if they can do anything. Don't explain anything at all about what you did; just say "I don't know what happened - it won't boot up, but something still happens when I connect it to a PC". Try to be very nice. Maybe even so nice that you (carefully) offer a bribe if you manage to talk to a tech.
Do this even if you are not a Verizon customer. The worst they can do is tell you "No, GTFO".
Desperate times call for desperate measures, and you are in a desperate situation.
PS: please report back as to what the outcome is.
.
Recover My Device with Jtag????
Any one can help to repair fully dead S7 Verizon G930v after Downgrade and flash by Combination file only get Com Port
MA7MOD_GSM said:
Any one can help to repair fully dead S7 Verizon G930v after Downgrade and flash by Combination file only get Com Port
Click to expand...
Click to collapse
Prob dosnt help but i hard brick my verizon s5 back a few years ago to this com port 9008 qualcomm usb. i had to make a debrick image and place it on external_sd it wasnt the easiest thing to do but theres a ton of info on it and a few youtube vidoes that guides to unbrick all samsung phones. Cant say that it still works but if i had to bet money on it then if you get the 9008 to pull up on a windows pc then it aint completely dead you can make a debrick image jus google debrick image s5 or qusb 9008 preloader debrick. def remember having to use heimdall flash tool so if u find that your in the right direction. Sorry im of no help on the issue jus remember when i bricked my phone i spent two days getting to kno it even better. And not to many people willing to help that was a few years ago so the help part is even worse today. Hope you figure it out and Good Luck!
Yes bro this solution need same ver or high bootloader binary to reload it by Sdcard my g930v hardbrick with binary 8, all solution available now only for binary 4 and 5 but not work with new binary ver
So all I need to unbrick my s7 is new dump with new binary
Thank you