Related
i have a bricked lg g2 d802t after ota update.
phone was recongnised from pc as qhsusb_bulk but after ubuntu method posted here Fix No recovery, download mode.. i think i made a mistake flashing boot partition?
now phone wont turn on, no download mode, recovery mode or anything else, but when connected to pc it shows qhsusb_bulk in the device manager, but the is still off and wont turn on.. do you have idea to fix this problem? please help me
anybody is experiencing the same state as i have? please help..
which partitions did you flash ?
bender_007 said:
which partitions did you flash ?
Click to expand...
Click to collapse
i only followed the instructions here and flashed the provided .img by the way im on official kitkat firmware, the provided .img is for jb right? do you think this can be still fix without going to service center? :crying:
scout1089 said:
i only followed the instructions here and flashed the provided .img by the way im on official kitkat firmware, the provided .img is for jb right? do you think this can be still fix without going to service center? :crying:
Click to expand...
Click to collapse
Flash only aboot, boot, laf. You need the d802T for aus i think.
bender_007 said:
Flash only aboot, boot, laf. You need the d802T for aus i think.
Click to expand...
Click to collapse
how can i do that? because i dont have download mode, nor the phone turns on, pc wont detect or recognize the phone anymore when connected, all i got is qhsusb_bulk in the device manager and no multiple drives shown in my computer like before, also ubuntu wont recognize nor detect it also.. :crying:
Try with knoppix m8.
bender_007 said:
Try with knoppix m8.
Click to expand...
Click to collapse
can you provide the link for the knoppix m8?
so im going to run this instead of ubuntu and follow the same instructions stated on the tutorial mentioned? and only flash the 3 .img aboot, boot, laf? am i right? so im going to extract the kdz in order to get the 3 .img specific to my device?
http://knoppix.net/get.php just the 3. Find your original kdz m8
bender_007 said:
http://knoppix.net/get.php just the 3. Find your original kdz m8
Click to expand...
Click to collapse
im going to extract the D802T kdz and get the 3 .img from it? sorry still a noob and could you please explain and guide me through?
edit: after booting with knoopix, inserted the phone still cant be read.. i found no biggest number and all numbers are the same 1-15, seems it did'nt detect the phone, please help
can someone else who manage to revive their phone help me?
please help
i didnt get it ..
ur pc recognize the device as qhsusb ? or doesnt recognize it at all ?
rotem11 said:
i didnt get it ..
ur pc recognize the device as qhsusb ? or doesnt recognize it at all ?
Click to expand...
Click to collapse
when connected to pc, it displays qhsusb_bulk in the device manager and nothing no multiple drives, the phone does not turn on but i think its on even though the screen looks dead because when i left it for an hour i felt the phone's battery is warm..
try go ubuntu and follow this guide http://forum.xda-developers.com/showthread.php?t=2681089
maozer said:
try go ubuntu and follow this guide http://forum.xda-developers.com/showthread.php?t=2681089
Click to expand...
Click to collapse
already did ubuntu wont detect the phone
can u try ubuntu with vmware?
maozer said:
can u try ubuntu with vmware?
Click to expand...
Click to collapse
im using the usb method, if the usb method didnt detect the phone so i guess the vmware wont too?
also tried knoppix it wont detect the phone's partition
well i had the exact same problem u have.. you can look at my previous posts..
i dont know why but it worked for me with vmware.. and in ur situation it worth a shoot.
one of the Initial Symptoms are qhsusb.. try it and let me know..
maozer said:
well i had the exact same problem u have.. you can look at my previous posts..
i dont know why but it worked for me with vmware.. and in ur situation it worth a shoot.
one of the Initial Symptoms are qhsusb.. try it and let me know..
Click to expand...
Click to collapse
okey i'll give it a shoot.. thank you
Galaxy
claudiudanila said:
Hi everyone, I have a big problem on my phone (SM-N910F) does not start even in download / recovery mode, the screen is off. I think it's a "hard brick."
All I can see now in device manager is Qualcomm HS-USB QDLoader 9008 (COM7).
Is there any possibility to bring my phone back into download mode? Please help me !!!
Click to expand...
Click to collapse
Well lets start by telling us what you did to the phone to get you where you are. And, what model is the N910F?
EDIT: is the "F" version for Europe?
Galaxy
What happens when you try to enter download mode?
Galaxy
claudiudanila said:
Thank you, I own a Samsung Galaxy Note 4, model SM-N910F for Europe.
I used a zip package to run a script via TWRP. The script was erasing some applications(bloatware) from rom. After the script was executed, I forgot to execute a wipe data/cache/factory and my phone was started to boot. After touchwiz was initialised, 3 seconds later my phone froze. Then I removed the battery and...here I am.
My computer is able to detect the phone(i can see in device manager Qualcomm HS-USB QDLoader 9008 (COM7) but Odin is unable to see any phone connected.
I've already tried an USB JIG but nothing...
I found an interesting thing, I can connect to the phone using QPST, please find attached a screenshot(Capture1.png). Here I found an option named Software Download. I've clicked this option and i can see: COM7 Phone in Download Mode. Please look at the attached picture Capture3. Here I can see two options: Phone Image and Boot image. Can I upload some specific boot image to unbrick my phone?
Click to expand...
Click to collapse
Not sure I can help you but you may be using a corrupted program, QPST. See here: http://forum.xda-developers.com/showthread.php?t=2263391
When the phone is hooked up to the charger do you get a charging indication on the LED? Is the battery charged or at least have some charge left on it?
Have you removed the battery and then tried to boot. If not give that a try. The only other recommendation I can offer since I've never used QPST and I don't know what script you ran to remove bloatware so I can't tell what it potentially did is to try to recover your phone through Kies (Samsung software). I seldom recommend Kies and have never used it myself since I have an unlocked bootloader, but if Kies recognizes your phone there may be hope. Good luck.
claudiudanila said:
Nothing...the screen is black, i cannot see anything, also Odin is unable to see the phone.
Click to expand...
Click to collapse
well it is weird that QPST shows you are in download mode but odin cannot see it.
Galaxy
Galaxy
claudiudanila said:
No led..no indicator..nothing...Kies is also unable to see the phone.
Click to expand...
Click to collapse
Sorry claudiudanila, based on what you've told us I have no other ideas.
claudiudanila said:
Hi everyone, I have a big problem on my Galaxy Note 4 phone (SM-N910F) does not start even in download / recovery mode, the screen is off. I think it's a "hard brick."
All I can see now in device manager is Qualcomm HS-USB QDLoader 9008 (COM7).
Is there any possibility to bring my phone back into download mode? Please help me !!!
Click to expand...
Click to collapse
I hope you are using windows pc not mac for odin.
jdomadia said:
I hope you are using windows pc not mac for odin.
Click to expand...
Click to collapse
Judging by the screenshots i would say its windows.
That said, I don't think I have any more ideas to add to the solutions already suggested.
You might wanna try your luck with z3x box or visit samsung service center.. that's all there's left to add.
maksharma231 said:
Judging by the screenshots i would say its windows.
That said, I don't think I have any more ideas to add to the solutions already suggested.
You might wanna try your luck with z3x box or visit samsung service center.. that's all there's left to add.
Click to expand...
Click to collapse
Using windows in mac parallel creates problem for flashing.
Galaxy
Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
qam47 said:
Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
Click to expand...
Click to collapse
I got the same problem here after using MIUI and trying to get out of it.
Stuck in bootloop, no recovery, download mode stuck at first screen, phone not being detected by pc and no flashing led anymore.
Anyone help us please, my phone is out of warranty too
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Rayaxe said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Click to expand...
Click to collapse
Thanks for the reply.
But it says:
http://forum.xda-developers.com/showthread.php?t=2582142
VERY IMPORTANT!!!!!!!
You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone. The link above is for 10b_EUR_16G firmware version. So don't use those files if your firmware version was not that one. Instead you should look for img files corresponding to the current version installed in your phone. If you don't know what version you've installed then don't use this method because you will break your phone.
Click to expand...
Click to collapse
and i dont know which one to download.
Here is the link to Miui 6, I did install before crashing
http://forum.xda-developers.com/lg-g2/development/kk-miui-6-lg-g2-variants-based-stock-lg-t3106569.
...
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Rayaxe said:
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Click to expand...
Click to collapse
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
GoPogoOreo! said:
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
Click to expand...
Click to collapse
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Rayaxe said:
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Click to expand...
Click to collapse
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
GoPogoOreo! said:
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
Click to expand...
Click to collapse
samething with me please help
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
vegetaleb said:
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
Click to expand...
Click to collapse
thanx alot for ur reply.. but this is tutorial for flashing M9+.. i really checked before...
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
What exactly steps did you do to brick?
iElvis said:
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
Click to expand...
Click to collapse
simonbigwave said:
What exactly steps did you do to brick?
Click to expand...
Click to collapse
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
t-mobile_mda said:
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
Click to expand...
Click to collapse
device is not restarting the driver second time as Preloader Device...
You will probably have better luck posting in the M9+ forum. I have never heard of this flash tool, but the dedicated xda thread for it seems to be full of bricks.
From the sound of it, you either flashed the wrong file or flashed the right file to the wrong place.
Just curious if the pc detects the device will an RUU detect it?
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
Usually something like "USB Preloader Device" means a low-level brick because the PC can't tell what it is. For a RUU to work, it has to be detectable by ADB, not just Device Manager.
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
bigp951 said:
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
Click to expand...
Click to collapse
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
That flash tool seems scary to me... Sorry for not adding any advice!
TwinAdk said:
That flash tool seems scary to me...
Click to expand...
Click to collapse
I had the same thought, especially given the number of bricks reported in the thread.
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
A hardware un bricking tool (sure there used to be a tool for htc devices xtc was it? Could be wrong?) or RMA seems to be your only options now.
Obviously try the holding all buttons and waiting for the vibrate method then try to get to bootloader mode. If that fails I'd be aiming to get it replaced, good news is if it is totally bricked, chances are HTC will just think the bootloader went on you.
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
hi..
as i say above pc detects the device..preloader or mtk usbvcom... and only SDcard flashing possible.. not exist RUU..
0PK7IMG.zip
iElvis said:
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
Click to expand...
Click to collapse
really i tried all methods while it has rebooting the bootlaoder screen..i flashed the device with this tool finally..and totally dead..
TwinAdk said:
That flash tool seems scary to me... Sorry for not adding any advice!
Click to expand...
Click to collapse
iElvis said:
I had the same thought, especially given the number of bricks reported in the thread.
Click to expand...
Click to collapse
this flash tool is for MTK 6795 devices which HTC M9+ is one of them.. only these flashloaders accept it's scatter file.. (MT6795_Android_scatter.txt)
SP_Flash_Tool_exe_Windows_v5.1504.00.000
SP_Flash_Tool_exe_Windows_v5.1512.00.000
SP_Flash_Tool_exe_Windows_v5.1516.00.000
SP_Flash_Tool_exe_Windows_v5.1520.00.000
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
özkan72 said:
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
Click to expand...
Click to collapse
hi..
u mean u r on the same condition.? only vibrates and detects com port as Preloader..?
Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Update - I found out the phone was still under warranty so I sent it away to be repaired. It was repaired and I now have a working phone !
ylmcc said:
Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Click to expand...
Click to collapse
What have you done to reach that state? I know that you're desperate but you must give some details if you want help.
It was given to me with 5.1.1 installed however it failed mid process and while on 5.1.1 it kept freezing and acting weird such as boot with weird errors and they only appeared after it was updated, I decided to root it with odin and it never fully rebooted after the was root applied. I finally got it to boot to stock and rooted and decided to install a custom recovery which was twrp while selecting the recovery it said if its a wrong location it will brick, with this in mind I checked the model with the one on their site and it seemed to make sense and applied it.
This caused the original problem which made it boot straight to download mode with it saying it could not normal boot. I then googled the problem and one said the pit was corrupted and downloaded the correct file. I then applied this through odin with stock firmware and it refuse to flash. At the time I was thinking a restart on the device would help, but it resulted in not booting at all and not being detected....
It does not light up or make a vibration when its connected or powered on if there is any solution it would be great...
Can anyone help or point in the right direction?
Hard brick SM-910F
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
[email protected] said:
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
Click to expand...
Click to collapse
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
ylmcc said:
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
Click to expand...
Click to collapse
qualcomm emergency download mode. is it called.
Tunestwo said:
qualcomm emergency download mode. is it called.
Click to expand...
Click to collapse
Anything I can do to get some sort of os on the phone now?
in this case via Odin tries to reinstall the tar of the official rom N910F .
ylmcc said:
Anything I can do to get some sort of os on the phone now?
Click to expand...
Click to collapse
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
mangui said:
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
Click to expand...
Click to collapse
The phone does not display or respond when the keys are pressed, just a black screen..
Battlehero said:
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
Click to expand...
Click to collapse
Chrome detected a virus in the rar
ylmcc said:
The phone does not display or respond when the keys are pressed, just a black screen..
Chrome detected a virus in the rar
Click to expand...
Click to collapse
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Battlehero said:
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Click to expand...
Click to collapse
I'll download it again but windows defender detected it too.
Edit - Yep did it again, here is a link to a photo of what I get but from virus total I don't get why its being flagged perhaps false positive ??
Update
Found a jtag service that is cheap will update once I get it back...
sm-n910f
I got a brick note 4 and i want to fix it
I search over the internet for this solution and found a method
Sd card repair boot but it did not work at all
I need help
thank you in advance