i have a samsung galaxy s4 I9500 which had 4.2.2 jelly bean
i tried to root it but it fell from the table while flashing using odin .. and the usb cable disconnected from the phone ...
now i have "firmware upgrade encountered an issue . please select recovery mode in kies & try again." on screen
i tried to open samsung kies -> tools -> firmware upgrade and initialisation and inserting the details of the phone but at the end it fails ..
please help me guys as fast as u can ! and sorry for my bad english .
thanks.
theshadow0 said:
i have a samsung galaxy s4 I9500 which had 4.2.2 jelly bean
i tried to root it but it fell from the table while flashing using odin .. and the usb cable disconnected from the phone ...
now i have "firmware upgrade encountered an issue . please select recovery mode in kies & try again." on screen
i tried to open samsung kies -> tools -> firmware upgrade and initialisation and inserting the details of the phone but at the end it fails ..
please help me guys as fast as u can ! and sorry for my bad english .
thanks.
Click to expand...
Click to collapse
flash stock with odin
samersh72 said:
flash stock with odin
Click to expand...
Click to collapse
please can u be more specific , which flash stock ? link if u can ? sorry cuz i feel worried
theshadow0 said:
please can u be more specific , which flash stock ? link if u can ? sorry cuz i feel worried
Click to expand...
Click to collapse
see my signature for guide, unbrick S4
samersh72 said:
see my signature for guide, unbrick S4
Click to expand...
Click to collapse
okay i will try it and i will notify u what happens ,, thanks
samersh72 said:
see my signature for guide, unbrick S4
Click to expand...
Click to collapse
it fails everytime ! (( im losing hope here
theshadow0 said:
it fails everytime ! (( im losing hope here
Click to expand...
Click to collapse
please let me know where it failed and what firmware you are flashing
samersh72 said:
please let me know where it failed and what firmware you are flashing
Click to expand...
Click to collapse
I used many firmwares not from your thread but others i found in google and summobile ,, because i needed an Israeli one CEL (Cellcom) i searched for GT-I9500 -> I9500GSMH
found I9500XXUBMG9_I9500OJKBMG9_I9500JKUBMG9_HOME.tar
I9500XXUAMDE_I9500OJKAMD9_I9500JKUAMD9_HOME.tar
tried using odin3 v3.07 and v1.85 while the s4 on download mode and had this fail :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500OJKAMD9_I9500JKUAMD9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
theshadow0 said:
I used many firmwares not from your thread but others i found in google and summobile ,, because i needed an Israeli one CEL (Cellcom) i searched for GT-I9500 -> I9500GSMH
found I9500XXUBMG9_I9500OJKBMG9_I9500JKUBMG9_HOME.tar
I9500XXUAMDE_I9500OJKAMD9_I9500JKUAMD9_HOME.tar
tried using odin3 v3.07 and v1.85 while the s4 on download mode and had this fail :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500OJKAMD9_I9500JKUAMD9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
nothing to fear
you have a problem with the connection between the phone and pc. some suggestions:
-be sure that kies is disabled from task manager
-try with another usb cable
-choose another usb port
-try other version of odin (i prefer 3.04).
samersh72 said:
nothing to fear
you have a problem with the connection between the phone and pc. some suggestions:
-be sure that kies is disabled from task manager
-try with another usb cable
-choose another usb port
-try other version of odin (i prefer 3.04).
Click to expand...
Click to collapse
i will try and will notify you in 15 mins
samersh72 said:
nothing to fear
you have a problem with the connection between the phone and pc. some suggestions:
-be sure that kies is disabled from task manager
-try with another usb cable
-choose another usb port
-try other version of odin (i prefer 3.04).
Click to expand...
Click to collapse
same problem ... should i fear now ??
im going to try another computer now
theshadow0 said:
same problem ... should i fear now ??
im going to try another computer now
Click to expand...
Click to collapse
still nothing to fear it is obvious it is a connection problem. it can not set up the connection
yes try another pc, and you can uninstall samsung driver and kies, then re-install it
samersh72 said:
still nothing to fear it is obvious it is a connection problem. it can not set up the connection
yes try another pc, and you can uninstall samsung driver and kies, then re-install it
Click to expand...
Click to collapse
didnt work ... i should go now .. i will respond tomorrow please do not forget me i still do need your help ! and thank yooou for your effort man !
samersh72 said:
still nothing to fear it is obvious it is a connection problem. it can not set up the connection
yes try another pc, and you can uninstall samsung driver and kies, then re-install it
Click to expand...
Click to collapse
waitttttttttt it workeeeeeedd man you aree awsome ! my hero !! you are my superman hahahaha !! DDDDDDDDD
woooow ! i thought i will not have a chance !
man you made my day my lifffee !
Can u please tell me what is the best way to root my device?
Sent from my GT-I9500 using xda app-developers app
theshadow0 said:
Can u please tell me what is the best way to root my device?
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Cf auto root by chainfire
Sent from my Galaxy Nexus using xda premium
That what bricked my phone! Hhh it takes long time after pressing start right?
Sent from my GT-I9500 using xda app-developers app
theshadow0 said:
That what bricked my phone! Hhh it takes long time after pressing start right?
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
No it must not take long time.
I guess that because you had a problem with connection
Sent from my Galaxy Nexus using xda premium
Oh right! Thanks man
Sent from my GT-I9500 using xda app-developers app
Does this root erase everything in my phone? Should I backup?
Sent from my GT-I9500 using xda app-developers app
Related
iam useing odin and i have all the files downloaded and when i hit start it says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-DI18-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and it wont load pass that will someone plz help me
Tyler145 said:
iam useing odin and i have all the files downloaded and when i hit start it says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-DI18-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and it wont load pass that will someone plz help me
Click to expand...
Click to collapse
Are you sure your phone is in download mode? (press one and power..)
and dont you need usb debugging on for odin?
Power off your phone, disconnect the cable from both ends, close Odin, boot back into Download Mode, reopen Odin, connect the cable, try again.
Please post questions in Q&A. This is not the Q&A section.
soryy for posting here and yes it in download mode and i have did that already i unplug it alot and plug it back in
Use a non-stock USB cable.
iam useing a blackberry cord
Tyler145 said:
soryy for posting here and yes it in download mode and i have did that already i unplug it alot and plug it back in
Click to expand...
Click to collapse
Redownload odin and usb drivers and tar file....are u sure its in the PDA section?
i redownload everything 3 times and yes it i have it in the pda i done this b4 and it worked fine for me but idk whats wrong i been trying for hours
Tyler145 said:
i redownload everything 3 times and yes it i have it in the pda i done this b4 and it worked fine for me but idk whats wrong i been trying for hours
Click to expand...
Click to collapse
Use these:
Odin/PIT
EC05 TAR
Switch to a different USB port, and if that doesn't work, a different PC.
Have you tried restarting your Computer/ changing USB ports (use the back ones if it's a desktop).
i have those downloaded and i have change everyport and i dont have a diff pc only 1
Tyler145 said:
i have those downloaded and i have change everyport and i dont have a diff pc only 1
Click to expand...
Click to collapse
Got any friends?
i tryed on a friend pc and it did not work idk whats wrong should i just call sprint to get a new cell ?
Tyler145 said:
i tryed on a friend pc and it did not work idk whats wrong should i just call sprint to get a new cell ?
Click to expand...
Click to collapse
No. Try a different USB cable, different from the one you're using (don't care what it is). Try Heimdall. Remove the battery from the phone and leave it that way for two hours, then come back and try again. Switch up the order you're connecting between device and PC. Make sure the TAR is in the right place.
ok thanks i will post back in 2 hours i will unplug the batt for a while
Also try to reboot the pc afther installing odin and see if that works
Sent from my SPH-D700 using XDA Premium App
And if all else still fails, try running Odin with the battery removed from the phone...
Pull Battery from Phone,
Connect USB Cable to Phone,
Start Odin,
Boot Phone into Download Mode by holding 1 and Power (with battery still removed),
Flash .tar file.
I normally don't have issues when using Odin, but the few times I have had Odin fail on me (in multiple attempts consecutively), I have then been successful by pulling the battery out and flashing again.
What version of Odin are you using? I have been using 1.6 which has always seemed to work. Here is a good place with lots of Odin advice and files:
http://forum.xda-developers.com/showthread.php?t=773032
HEEEELP.. Was trying to flash to stock JVP through ODIN and i mistakenly remove my fone during flashing.
Now my fone does not even bootup anymore. It can only get to download mode.
I've tried to flash again but got no result. see ODIN message during flash below.
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
won't go pass the setuConnection.
PLSS HELP.
This is not a brick. Have you tried to Re-open ODIN or to Restart the Computer?
i've tried both. it does not get pass the <ID:0/005> SetupConnection..
Restart computer.
Unplug phone.
Start odin.
Add files.
Connect phone.
Flash.
Be patient.
Sent from my GT-I9000 using XDA Premium App
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Also, take battery out of phone and wait for 20 seconds. then do as above.
gizmolala said:
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Click to expand...
Click to collapse
Sometimes just waiting a while does it. Get a different version of odin maybe?
gizmolala said:
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Click to expand...
Click to collapse
You loading up files into odin before or after you plug the phone in?
I know you are probably freaking out right now but if you can get download mode then it's still recoverable.
jcspecs said:
You loading up files into odin before or after you plug the phone in?
I know you are probably freaking out right now but if you can get download mode then it's still recoverable.
Click to expand...
Click to collapse
Exactly m8
Try using Odin 3.1 & flash with that if problem persists.
i loaded up files into odin b4 connecting my fone.
am using odin3 v1.85. where can i get 3.1 from pls
gizmolala said:
i loaded up files into odin b4 connecting my fone.
Click to expand...
Click to collapse
When you plug the phone in, is windows registering it and if so, are the drivers working correctly?
gizmolala said:
am using odin3 v1.85. where can i get 3.1 from pls
Click to expand...
Click to collapse
1.85 should be good. Try 1.7 maybe.
Could always try using heimdall instead of odin
Sent from my mosaic powered SGH-I897 using XDA Premium App
pls can u point me to where i can download heimdall from?
rquiett said:
Could always try using heimdall instead of odin
Click to expand...
Click to collapse
A valid point. Try Heimdall.
Have you removed sd- card and sim. Happened to me once. Removing both did the trick.
Sent from my GT-I9000 using XDA App
It's not a brick yet, dont worry.
1. Can you still go to the recovery mod? try to wip data/factory reset. reflash it.
2. If possible, do you have froyo 2.2 official (just as it's only one file in TAR)? Just flash it. Then flash 2.3.4 again.
Thanks all for your help.. I've tried all your suggestions but my phone won't actually boot to download mode anymore.
I've tried several times to go to download mode but to no avail. Screen is always blank (Black Screen) every time i tried.
gizmolala said:
Thanks all for your help.. I've tried all your suggestions but my phone won't actually boot to download mode anymore.
I've tried several times to go to download mode but to no avail. Screen is always blank (Black Screen) every time i tried.
Click to expand...
Click to collapse
take battery out for 10 mins then put it back in and try to go straight to download mode, see if that works
i downloaded the coDrom v1 and installed it without using cwm....so nw wen i start my phone ,... it's stuck on the screen which displays samasung galaxy y gt s-5380......and also wen i try to enter in recovery mode...the same things happens.....and can't access anything....plz tell me wat to do.....can't even see anything except the startup screen
.:crying::crying::crying:
You bricked ur phone try flashing odins.... Search for it on xda or google......
Thank mee if i helped uuu......
Sent from my awesome y......
harrynxo92 said:
i downloaded the coDrom v1 and installed it without using cwm....so nw wen i start my phone ,... it's stuck on the screen which displays samasung galaxy y gt s-5380......and also wen i try to enter in recovery mode...the same things happens.....and can't access anything....plz tell me wat to do.....can't even see anything except the startup screen
.:crying::crying::crying:
Click to expand...
Click to collapse
There's no need to worry. You just Soft Bricked your phone. ) (I've faced this problem a lot of times buddy)
Go to this post and download the required build according to your country. Follow the steps and Voila, STOCK ROM !
http://forum.xda-developers.com/showthread.php?t=1465800
Please press the thanks button if you think I helped you, It's to the left of this post.
Yeah goto SamFirmware.Com and download latest version...
Goto Download Mode by Pressing Vol down + home + power and Connect it to pc use compatible odin and flash...
Happy Flashing
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
Omaxe said:
Yeah goto SamFirmware.Com and download latest version...
Goto Download Mode by Pressing Vol down + home + power and Connect it to pc use compatible odin and flash...
Happy Flashing
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
Click to expand...
Click to collapse
Nope, SamFirmware.Com always dont have odin flashable packages, use the stock firmwares from doky73s stock firmwares thread of android development
got stuck again
i got stuck again on odin on
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_DDLF2.tar.md5 is valid.
<OSM> MODEM_S5360_DDLF1.tar.md5 is valid.
<OSM> CSC_S5360_ODDLF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
m aolo nt able to go in my recovery mode also... please help me ASAP
silent_screamer said:
i got stuck again on odin on
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_DDLF2.tar.md5 is valid.
<OSM> MODEM_S5360_DDLF1.tar.md5 is valid.
<OSM> CSC_S5360_ODDLF1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
m aolo nt able to go in my recovery mode also... please help me ASAP
Click to expand...
Click to collapse
i experienced that also but i made it...
Try to off your phone first, then take out the battery and sd card.. put it again after few seconds, then re-do the procedure given to you.
Try to close also samsung keis program and be patient sometimes Setup Connection take a few seconds or a minute...
I cannot open ma recovery mode...!!!!:crying::crying::crying::crying:.
My System does not recogonize my phone...!!!:crying::crying::crying:
I have the Odin3 1.85.. and the rom package too...!! i also did install the USB driver..!! but stil.. i can;t do anythin..!!
all this started wen I tried to over clock my phone..!
Now,, all I have is the start up screen,,, nothing else...:crying::crying:
Please Help Me,,!! i am a New guy.. in dis,,,, Rooting n... al those stuff...:crying::crying:
NewBeeie said:
I cannot open ma recovery mode...!!!!:crying::crying::crying::crying:.
My System does not recogonize my phone...!!!:crying::crying::crying:
I have the Odin3 1.85.. and the rom package too...!! i also did install the USB driver..!! but stil.. i can;t do anythin..!!
all this started wen I tried to over clock my phone..!
Now,, all I have is the start up screen,,, nothing else...:crying::crying:
Please Help Me,,!! i am a New guy.. in dis,,,, Rooting n... al those stuff...:crying::crying:
Click to expand...
Click to collapse
Ensure you must install latest Samsung drivers..
Try to connect your phone in download mode.. (Volumedown+home+power)..
It will detect..(Shows in Picture).
If not pull out our battery and go to download mode again and connect..(Try until it detects)
Flash Stock rom.. & Reply..
Calm down don't panic or else you'll fail. Here are the steps.
1. Install the correct drivers for your phone (drivers can be installed through kies)
2. Download odin with the appropriate firmware of your country
3. Connect your phone to the computer in recovery mode (volume down+ menu+ powerbutton)
4. After connecting on, there top of odin there will be a yellow box that would say com 0:[COM:X] (x is any number)
5. After connecting fill pda, phone,csc.
6. Flash it with no interruptions.
7a. If u are successful then you can turn on your phone
7b. If your not successful then repeat step one and make sure you do it properly.
8. Press the thanks button
Sent from my Titan TV S320 using xda premium
is der any problem if I use the Kies instead...???????????
amtra said:
Ensure you must install latest Samsung drivers..
Try to connect your phone in download mode.. (Volumedown+home+power)..
It will detect..(Shows in Picture).
If not pull out our battery and go to download mode again and connect..(Try until it detects)
Flash Stock rom.. & Reply..
Click to expand...
Click to collapse
No... No luck dude.....:crying:
I just went on Doing it... stil no sign..!!
My pc doesn't show anything when I connect my phone.....
amtra said:
Ensure you must install latest Samsung drivers..
Try to connect your phone in download mode.. (Volumedown+home+power)..
It will detect..(Shows in Picture).
If not pull out our battery and go to download mode again and connect..(Try until it detects)
Flash Stock rom.. & Reply..
Click to expand...
Click to collapse
Hey..!!!!:laugh:
Thankz alot buddy...!!! I got my phone fixed up..!!!
I actually thought that the Recovery Mode is same as the Download Mode..!!!
N.. i kept on pressing the Volume up key... instead of Volume Down key...!!!
Datz y..!!!
Anyways.. all the other files ... lyk odin.. n otherz.. did play their part...:fingers-crossed: Thankz Aloooooooooooooooooooooooooooooooooooooooooot for that....!!!!!!!!!!!!!!!!
so.... if I hav any more problems... I wil post 'em up.. do Help me ok...:cyclops::
Thankz..!!!!!!!!!!!!!:victory::victory::victory::victory::victory::victory::victory::victory::victory::victory:
i have gt6103 not s5360 but i have the same problem. I cant go to download mode and i was thinking maybe you could help me. The thing is that i have WHITE SCREEN and i cant do anything so i suppose i have hard brick. Is there any solution? thanks in advance
zaf_4 said:
i have gt6103 not s5360 but i have the same problem. I cant go to download mode and i was thinking maybe you could help me. The thing is that i have WHITE SCREEN and i cant do anything so i suppose i have hard brick. Is there any solution? thanks in advance
Click to expand...
Click to collapse
Try a usb jig.
Sent from my GT-S5360 using xda app-developers app
zaf_4 said:
i have gt6103 not s5360 but i have the same problem. I cant go to download mode and i was thinking maybe you could help me. The thing is that i have WHITE SCREEN and i cant do anything so i suppose i have hard brick. Is there any solution? thanks in advance
Click to expand...
Click to collapse
Flash stock rom via odin as if the screen was working
in other words
Connect phone to pc & open odin
enter download mode on phone
If get white screen do what you would do if it was fine
so push volume up
then flash stock rom
you may get lucky & it flashes
marcussmith2626 said:
Flash stock rom via odin as if the screen was working
in other words
Connect phone to pc & open odin
enter download mode on phone
If get white screen do what you would do if it was fine
so push volume up
then flash stock rom
you may get lucky & it flashes
Click to expand...
Click to collapse
I used usb jig but nothing...just still white screen.. and ofcourse did what you said trying to flash with white screen through odin but no luck...
sohar85 said:
how to resolve the problem….i have galaxy y young….i got this problem after reset….
AFTER try a lot i enter the recovery mode……its just says formatting….and reboots automatically ….again and again
Click to expand...
Click to collapse
Support isn't given for banned roms here
Enter download mode & flash stock rom via odin
thanks
Thank i am also searching for odin
Galaxy Y: can,t go to recovery mode ( Odin Mode)
my samsung galaxy young can't go to recovery mode and the odin mode always appear. i did heard that flashing will do it, but it still won,t working...
So, my Galaxy J5 Prime G570F switched off suddenly while I was using it. Since then, it only loads to Download Mode (Vol - + Power + Home) and shows Downloading, do not turn off target. I downloaded the stock rom files from xda and tried various versions of Odin with no success. Each time, Odin gets stuck on Initialization and my phone screen just shows the same Downloading. I noticed FRP and Secure Download are enabled. I have tried different USB ports and am using the original USB cable that came with it.
I even tried the old Odin 1.86 and here's the log from that:-
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G570FXXU1CRH9_CL14263629_QB19595919_REV00_user_low_ship.tar.md5 is valid.
<OSM> AP_G570FXXU1CRH9_CL14263629_QB19595919_REV00_user_low_ship_meta.tar.md5 is valid.
<OSM> CP_G570FXXU1CRH8_CL909798_QB10643368_SIGNED.tar.md5 is valid.
<OSM> CSC_OJV_G570FOJV1CRH9_CL14263629_QB19595919_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Please help.
vistatech9895927087 said:
<ID:0/003> Can't open the serial(COM) port.
Click to expand...
Click to collapse
Odin is is failing to recognize the usb port/device. Is the COM box blue?
You could try to install the samsung drivers at
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
I had the same issue and the drivers solved it.
Sent from my SM-J530G using XDA Labs
scroll-lock said:
Odin is is failing to recognize the usb port/device. Is the COM box blue?
You could try to install the samsung drivers at
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
I had the same issue and the drivers solved it.
Click to expand...
Click to collapse
Yes, the COM box is turning blue and I tried installing different drivers with no luck.
vistatech9895927087 said:
Yes, the COM box is turning blue and I tried installing different drivers with no luck.
Click to expand...
Click to collapse
hmm, is it possible to exit download mode and enter in the stock recovery?
Its weird because you did not flashed anything to brick it, maybe something got corrupt and a factory reset could help.
Sent from my SM-J530G using XDA Labs
scroll-lock said:
hmm, is it possible to exit download mode and enter in the stock recovery?
Its weird because you did not flashed anything to brick it, maybe something got corrupt and a factory reset could help.
Click to expand...
Click to collapse
I tried getting into the recovery (vol + + home + power) but it just won't boot. The only combination that works is vol - + home + power and it loads into download mode. I have been trying to fix this for some time now.
Please help someone!
same problem any body knows the solution
vistatech9895927087 said:
Please help someone!
Click to expand...
Click to collapse
1234devil said:
same problem any body knows the solution
Click to expand...
Click to collapse
How are things??
Ummm what Android os version was you on when you device suddenly shut down its self... just try latest oreo from other countries or trying to flash a combination firmware ... or else use other tool like octopus or Samsung zx box to flash your firmware
---------- Post added at 07:47 PM ---------- Previous post was at 07:41 PM ----------
1234devil said:
same problem any body knows the solution
Click to expand...
Click to collapse
Ummm what Android os version was you on when you device suddenly shut down its self... just try latest oreo from other countries or trying to flash a combination firmware ... or else use other tool like octopus or Samsung zx box to flash your firmware
Hi all, first time trying to flash a ROM and having difficulties.
I recently purchased a Tab A from Ebay and after a few weeks got round to using it, turned it on and it is saying that it needs the account it was setup with in order to finish the setup.
Tried messaging the seller but haven't got anywhere so thought I just wipe it to factory defaults and try again. But it says this cant be done as the FRP lock is enabled.
So did some reading and found out about Odin and flashing the ROM, so downloaded Odin3_v3.14.4, and ROM making sure it was the right version for my Tab, downloaded USB drivers, put Tab in download mode and loaded Odin running as Admin, loaded the AP file and clicked start then it just fails!!! No message comes up on the Tab just fails in Odin?
I have included log below so can someone please help me. I have screen captures to but cant find out how to add them here.
Thanks
Lee
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_T585XXU1APE8_CL7959249_QB9650311_REV00_user_low_ship_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Leemond75 said:
Hi all, first time trying to flash a ROM and having difficulties.
I recently purchased a Tab A from Ebay and after a few weeks got round to using it, turned it on and it is saying that it needs the account it was setup with in order to finish the setup.
Tried messaging the seller but haven't got anywhere so thought I just wipe it to factory defaults and try again. But it says this cant be done as the FRP lock is enabled.
So did some reading and found out about Odin and flashing the ROM, so downloaded Odin3_v3.14.4, and ROM making sure it was the right version for my Tab, downloaded USB drivers, put Tab in download mode and loaded Odin running as Admin, loaded the AP file and clicked start then it just fails!!! No message comes up on the Tab just fails in Odin?
I have included log below so can someone please help me. I have screen captures to but cant find out how to add them here.
Thanks
Lee
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_T585XXU1APE8_CL7959249_QB9650311_REV00_user_low_ship_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If you are getting the error blocked by FRP lock when flashing then that means you need to enable OEM unlocking which you cannot do since you can't get past the setup screen. You really do not have any option but to return it or message the seller
JJcoder said:
If you are getting the error blocked by FRP lock when flashing then that means you need to enable OEM unlocking which you cannot do since you can't get past the setup screen. You really do not have any option but to return it or message the seller
Click to expand...
Click to collapse
Hi JJcoder and thanks for the reply, I was hoping that you wasn't going to say that!
I cant get hold of the seller obv because they knew of this problem, going to have to just take it on the chin by the looks of it and a lesson learnt!!
Thanks again for the reply dude.
Lee
Leemond75 said:
Hi JJcoder and thanks for the reply, I was hoping that you wasn't going to say that!
I cant get hold of the seller obv because they knew of this problem, going to have to just take it on the chin by the looks of it and a lesson learnt!!
Thanks again for the reply dude.
Lee
Click to expand...
Click to collapse
There is one thing that you can try...
You have to find a combination firmware with the same bootloader version as your current one.
Then, Flash that combination firmware and then flash back to stock. It has worked on some other devices to bypass FRP.
The locked bootloader shouldn't block it because it is still Official firmware.
If that doesn't work then like I said you don't really have any other option...
JJcoder said:
The one thing you can try but is not guaranteed to work is...
Flash the combination firmware and then flash back to stock. It has worked on some other devices to bypass FRP.
The locked bootloader won't block it because it is still Official firmware.
If that doesn't work then like I said you don't really have any other option...
Click to expand...
Click to collapse
Okay thanks, willing to give anything a try at this point!
As I say I'm a newbee at this so could you tell me what I have to do please?
Leemond75 said:
Okay thanks, willing to give anything a try at this point!
As I say I'm a newbee at this so could you tell me what I have to do please?
Click to expand...
Click to collapse
Ok first download this Odin: https://forum.xda-developers.com/attachment.php?attachmentid=4952061
And then download this firmware: https://mega.nz/file/Ynow0S7B#mRuSS_qZUKzmRPQHwfVCRv1H09PCHtbu-8J_pqr5_b8
Then flash this firmware in the AP slot and make sure repartition is not enabled.
If you get an error than try this firmware: https://mega.nz/file/IyxlmSCK#MtyhDSad3a_xQypxAvLQU2nS0-RbapT0FvfOq_j27Zs
Then flash back to stock ROM and cross your fingers ?
Edit: If you can't boot into the combo firmware than you can do a factory reset in recovery.
JJcoder said:
Ok first download this Odin: https://forum.xda-developers.com/attachment.php?attachmentid=4952061
And then download this firmware: https://mega.nz/file/Ynow0S7B#mRuSS_qZUKzmRPQHwfVCRv1H09PCHtbu-8J_pqr5_b8
Then flash this firmware in the AP slot and make sure repartition is not enabled.
If you get an error than try this firmware: https://mega.nz/file/IyxlmSCK#MtyhDSad3a_xQypxAvLQU2nS0-RbapT0FvfOq_j27Zs
Then flash back to stock ROM and cross your fingers ?
Click to expand...
Click to collapse
Thanks so much dude, trying now!
Leemond75 said:
Thanks so much dude, trying now!
Click to expand...
Click to collapse
Tell me if it works!
Hi Please help
i have T585XXU6CTE6 (SM-T585, Samsung Tab A6 2016) Education Tab! (No play store, can’t install unknown source, not enable able)
i can’t open download mode (cannot install TWRP or Root)
can’t Factory reset even from recovery: MDM error
lock screen setting is disabled in setting no way to enable it! so i can't do factory reset using PIN Code error after 15 trial
every time i turn on developer option it disabled automatically once i leave About page
any suggestions??