Database Users

Galaxy Tab stuck on bootup

So I've got a Euro non-carrier galaxy tab - shortly after receiving it I've done an update via Kies and this appears to of bricked the device.
Here is what happens:
Booting normally, the device sits on the Samsung logo and occasionally vibrates. This can go on for hours
In recovery, I get:
update media, please wait
update media, finished
#manual mode#
update application, please wait
check_point2: /data/app is not directory
followed shortly by the recover menu, with the following extra lines:
update application, finished
-appling muti-csc...
installing muti-csc
Now, here are the things I've done that I think are related
OCLF
Root
So - How do I fix this? I've tried pushing a fresh firmware back onto the device via odin 1.7, and this fails:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_P1000XXJM6.tar.md5 is valid.
<OSM> MODEM_P1000XXJM6.tar.md5 is valid.
<OSM> CSC_P1000OXAJM6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm running on an x64 win7 box btw.
I've tried:
wipe data/factory reset from recovery, which takes me to the screen with the andy and an orange ! in a triangle, but nothing more
the same happens if i try any option from recovery, really.
I welcome any suggestions - I've found a few people having similar issues, but no real luck in trying their solutions.

Oh hang fire guys, 'Phone EFS clear' appears to have fixed it...it's reflashing now in any case..
edit: i take that back, its made no difference at all. Ideas?

Anyone? Please help

thepittbull said:
Anyone? Please help
Click to expand...
Click to collapse
Don't panic! As I understand you did OCLF that converted Samsung proprietery RFS into ext4. This means that in order to reflash anything new you would need to convert it back. There is extensive material on how to revert it on XDA, for example in Samsung Vibrant development forum.
Look for it and revert. Then you can use Odin.

I did a similar thing the first time Kies offered me an update for my Samsung Galaxy S, I knew I was supposed to undo the OCLF first but in my haste to sample the new firmware I forgot.. Anyway, you won't be able to fix this with Kies as you'll need to do a full flash with re-partition via Odin. Good luck, I hope you get it working again!

Tried a full flash... now am stuck at the samsung logo...

thepittbull said:
Tried a full flash... now am stuck at the samsung logo...
Click to expand...
Click to collapse
Try to shut it down holding Power button. Then holding Volume-Up and Power try to boot it into recovery.
If you see text on the screen you can try to select to do full wipe following directions from the Tab screen, then reboot.
Another option is to flash Roto-JME with internal SD formatting. This operation is supposed to restore original RFS file system as well as firmware.
Since I never did this on a top of ext4 files system and I cannot say anything about the outcome.

Thanks will try that. Downloding Roto-JME-FmtIntSD-v2.zip now

Look for the dbdata.tar file on this forum and run Odin again (2nd run)

Got it! It worked. Thanks Adapt0r! Thanks so much!

Heeelp....bricked sgs i9000

HEEEELP.. Was trying to flash to stock JVP through ODIN and i mistakenly remove my fone during flashing.
Now my fone does not even bootup anymore. It can only get to download mode.
I've tried to flash again but got no result. see ODIN message during flash below.
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
won't go pass the setuConnection.
PLSS HELP.

This is not a brick. Have you tried to Re-open ODIN or to Restart the Computer?

i've tried both. it does not get pass the <ID:0/005> SetupConnection..

Restart computer.
Unplug phone.
Start odin.
Add files.
Connect phone.
Flash.
Be patient.
Sent from my GT-I9000 using XDA Premium App

i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."

Also, take battery out of phone and wait for 20 seconds. then do as above.

gizmolala said:
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Click to expand...
Click to collapse
Sometimes just waiting a while does it. Get a different version of odin maybe?

gizmolala said:
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Click to expand...
Click to collapse
You loading up files into odin before or after you plug the phone in?
I know you are probably freaking out right now but if you can get download mode then it's still recoverable.

jcspecs said:
You loading up files into odin before or after you plug the phone in?
I know you are probably freaking out right now but if you can get download mode then it's still recoverable.
Click to expand...
Click to collapse
Exactly m8
Try using Odin 3.1 & flash with that if problem persists.

i loaded up files into odin b4 connecting my fone.

am using odin3 v1.85. where can i get 3.1 from pls

gizmolala said:
i loaded up files into odin b4 connecting my fone.
Click to expand...
Click to collapse
When you plug the phone in, is windows registering it and if so, are the drivers working correctly?

gizmolala said:
am using odin3 v1.85. where can i get 3.1 from pls
Click to expand...
Click to collapse
1.85 should be good. Try 1.7 maybe.

Could always try using heimdall instead of odin
Sent from my mosaic powered SGH-I897 using XDA Premium App

pls can u point me to where i can download heimdall from?

rquiett said:
Could always try using heimdall instead of odin
Click to expand...
Click to collapse
A valid point. Try Heimdall.

Have you removed sd- card and sim. Happened to me once. Removing both did the trick.
Sent from my GT-I9000 using XDA App

It's not a brick yet, dont worry.
1. Can you still go to the recovery mod? try to wip data/factory reset. reflash it.
2. If possible, do you have froyo 2.2 official (just as it's only one file in TAR)? Just flash it. Then flash 2.3.4 again.

Thanks all for your help.. I've tried all your suggestions but my phone won't actually boot to download mode anymore.
I've tried several times to go to download mode but to no avail. Screen is always blank (Black Screen) every time i tried.

gizmolala said:
Thanks all for your help.. I've tried all your suggestions but my phone won't actually boot to download mode anymore.
I've tried several times to go to download mode but to no avail. Screen is always blank (Black Screen) every time i tried.
Click to expand...
Click to collapse
take battery out for 10 mins then put it back in and try to go straight to download mode, see if that works

Help!! s4-i GT-i9500 wont reboot...Black screen. :(

My S4 GT-i9500 went out of battery last night and now it wont boot. I'm on PA 4.4 beta 1.
Although I can enter download mode only when my phone is connected to the PC but odin is not recognizing it.
Also if I disconnect it from the computer, my phone goes blank again.
Please help!!

Guys any possible solution to revive this phone or should I head towards the service center???

u_kansal said:
Guys any possible solution to revive this phone or should I head towards the service center???
Click to expand...
Click to collapse
Try reinstalling samsung drivers or kies to get odin to recognize the phone,
if Odin works again then you can try and flash stock firmware for your device

possible fix is to disable personalized message
I had same problem since KitKat 4.4.2 ( FNB8).
I think I fixed it by disabling personalized message on lock screen
1. go to Setting/LockScreen/Lock screen widget
2. disable personalized message by selecting clock

It doesn't sound like a software problem.
My guess is either your battery (is the battery swollen?) or a hardware problem.

Stefan0vic said:
Try reinstalling samsung drivers or kies to get odin to recognize the phone,
if Odin works again then you can try and flash stock firmware for your device
Click to expand...
Click to collapse
I reinstalled kies but odin is still not recognizing.

u_kansal said:
I reinstalled kies but odin is still not recognizing.
Click to expand...
Click to collapse
Why do you assume it's a software problem? If your battery ran out and now you can't boot, then the chances that it's a software problem is something like 0,1%.
Your battery is probably damaged, try a new battery.

Lennyz1988 said:
Why do you assume it's a software problem? If your battery ran out and now you can't boot, then the chances that it's a software problem is something like 0,1%.
Your battery is probably damaged, try a new battery.
Click to expand...
Click to collapse
Well I tried a different battery,but still I can't pass the "Samsung Galaxy S4 GT-i9500" screen. It blinks once, stays for about 5-7 seconds and then the phone shuts off.
I also can't access the recovery.

Can someone send me the correct PIT files for GT-i9500 or the link plzzz now.
I managed to connect it with odin I believe my phone is soft bricked. So flashing stock firmware, but getting an error, no PIT partition found.

Guys I'm getting this error in odin
Plz help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUFNC1_I9500ODDFNC1_I9500DDUFNA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Stuck in bootloop and not even ODIN wants to work! Help!

Hi,
My wife's phone SM-G935F started to bootloop after a normal update. It goes to the loading screen (IMG 1) and just stays there. The only thing I can do from there is VolDown+Power to reset or Voldown+Home+Power to Recovery mode.
Can't access factory reset mode, and the only other thing i've been able for it to show is the light-blue screen with the "!" simbol and "Try using Smart Switch Recovery..." which didn't work.
IMG1= https://s11.postimg.org/w6vna4mwz/20161029_180455.jpg
I Don't exacly know the region of the phone, but i think it is the Trinidad and Tobago one (International unlocked bought from B&H).
Anyone knows how to know region from a cell you can't boot?
Also don't know if OEM was active or not, but i think this is the problem. If i can't boot the cell, hoy to disable OEM prot?
When I try to ODIN it shows this:
http://postimg.org/image/4yyt2sd1b/
And then it FAILS
I don't know what more to do.
My odin active options are:
Auto Reboot
F. Reset Time
And the phome screen goes from this:
http://postimg.org/image/qwqoiu2nz/
To displaying this
http://smg.photobucket.com/user/brava/media/20150902_012011_zpsjm9lr9np.jpg.html
Just instead of RECOVERY, it says BOOT.
I successfully updated the bootload so the "!" simbol and "Try using Smart Switch Recovery..." screen isn't showing anymore, but the bootloop is still going. Cant update the AP, CP not CSC.
Anyone has any idea what can i do?
This phone was running Marshmelow, never had been rooted and never used custom roms in it. It was only 3 months old. Think of the children
Thanks

smart switch will work if you download the drivers to your computer. this step is necessary to allow smart switch to see your phone.
then use smart switch, click on more, emergency recovery, then device initialization.
followinstructions, it should take about 5 minutes to recover your phone, if you have input the correct information.

Cosmic Blue said:
smart switch will work if you download the drivers to your computer. this step is necessary to allow smart switch to see your phone.
then use smart switch, click on more, emergency recovery, then device initialization.
followinstructions, it should take about 5 minutes to recover your phone, if you have input the correct information.
Click to expand...
Click to collapse
Does the phone needs to be in download mode? or in the loading screen is ok?
Only 3 options I have are:
Boot screen (galaxy screen)
Powered Off
Download mode.
I can't reach any other screens.
Thanks!

Sedado77 said:
Does the phone needs to be in download mode? or in the loading screen is ok?
Only 3 options I have are:
Boot screen (galaxy screen)
Powered Off
Download mode.
I can't reach any other screens.
Thanks!
Click to expand...
Click to collapse
Loading screen is fine as long as smart switch can see your phone, the procedure should work.
I was in the same position once.

what have u chosed in odin? this look like bootloader is broken

Cosmic Blue said:
Loading screen is fine as long as smart switch can see your phone, the procedure should work.
I was in the same position once.
Click to expand...
Click to collapse
Smart Swich is working as ****. it doesn't load the recovery screen even if the phone is not connected
Any idea how to make it work=?
Windows 7 x64 here.

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Here is my ODIN log when I try to BT/AD my phone.

Sedado77 said:
Here is my ODIN log when I try to BT/AD my phone.
Click to expand...
Click to collapse
This is the case when i try to AD everytime. I'm quite sure my problem is the region of the firmware, but i can't know WHICH firmware to download. I called the US store where i bought it and they told me it was from Vietnam.
Got the Vietnam Stock Firmware (XXV) and it still is "Blocked by FRP Lock" when it tryies to do the recovery.img file...
Anyone knows how to get the region of the phone from the serial/imei or any other meens whith a soft bricked phone?
I tried SmartSwitch but it had the same problem. I think it used the region from the BL/CSC i flashed to it instead of the original one...
Also, the radio from the Vietnam version didn't match my phone...
Any ideas?
I can't take it to the manufacturer, i bought it online from H&M in the US and I live in South America.
HELP!!!:crying::crying:

load Odin 3.1.2.3
load Samsung_G935x_QC_Rooted_BOOT.TAR
Power off Phone ( hold Power + Vol down) ..... hold Power+Home+Vol down to enter Download mode....
connect S7 Edge to Computer ( DL Mode)
open Odin as an Administrator (!!) - right click on Odin-
put "Samsung_G935x_QC_Rooted_BOOT.TAR" in Odin
Flash
if it won`t work... try a samsung kernel... without root

I have same problem as OP help ? I had 7.0 update but it only made my phone restart, now i flashed official with odin and now stuck in bootloop... can only seem to access download mode, smart switch if i try connect says my phone is not supported.. what the hell to do now ???

G570F bricked. Only loads Download Mode but Odin stuck on Initiliazation! Please help

So, my Galaxy J5 Prime G570F switched off suddenly while I was using it. Since then, it only loads to Download Mode (Vol - + Power + Home) and shows Downloading, do not turn off target. I downloaded the stock rom files from xda and tried various versions of Odin with no success. Each time, Odin gets stuck on Initialization and my phone screen just shows the same Downloading. I noticed FRP and Secure Download are enabled. I have tried different USB ports and am using the original USB cable that came with it.
I even tried the old Odin 1.86 and here's the log from that:-
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G570FXXU1CRH9_CL14263629_QB19595919_REV00_user_low_ship.tar.md5 is valid.
<OSM> AP_G570FXXU1CRH9_CL14263629_QB19595919_REV00_user_low_ship_meta.tar.md5 is valid.
<OSM> CP_G570FXXU1CRH8_CL909798_QB10643368_SIGNED.tar.md5 is valid.
<OSM> CSC_OJV_G570FOJV1CRH9_CL14263629_QB19595919_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Please help.

vistatech9895927087 said:
<ID:0/003> Can't open the serial(COM) port.
Click to expand...
Click to collapse
Odin is is failing to recognize the usb port/device. Is the COM box blue?
You could try to install the samsung drivers at
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
I had the same issue and the drivers solved it.
Sent from my SM-J530G using XDA Labs

scroll-lock said:
Odin is is failing to recognize the usb port/device. Is the COM box blue?
You could try to install the samsung drivers at
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
I had the same issue and the drivers solved it.
Click to expand...
Click to collapse
Yes, the COM box is turning blue and I tried installing different drivers with no luck.

vistatech9895927087 said:
Yes, the COM box is turning blue and I tried installing different drivers with no luck.
Click to expand...
Click to collapse
hmm, is it possible to exit download mode and enter in the stock recovery?
Its weird because you did not flashed anything to brick it, maybe something got corrupt and a factory reset could help.
Sent from my SM-J530G using XDA Labs

scroll-lock said:
hmm, is it possible to exit download mode and enter in the stock recovery?
Its weird because you did not flashed anything to brick it, maybe something got corrupt and a factory reset could help.
Click to expand...
Click to collapse
I tried getting into the recovery (vol + + home + power) but it just won't boot. The only combination that works is vol - + home + power and it loads into download mode. I have been trying to fix this for some time now.

Please help someone!

same problem any body knows the solution

vistatech9895927087 said:
Please help someone!
Click to expand...
Click to collapse
1234devil said:
same problem any body knows the solution
Click to expand...
Click to collapse
How are things??

Ummm what Android os version was you on when you device suddenly shut down its self... just try latest oreo from other countries or trying to flash a combination firmware ... or else use other tool like octopus or Samsung zx box to flash your firmware
---------- Post added at 07:47 PM ---------- Previous post was at 07:41 PM ----------
1234devil said:
same problem any body knows the solution
Click to expand...
Click to collapse
Ummm what Android os version was you on when you device suddenly shut down its self... just try latest oreo from other countries or trying to flash a combination firmware ... or else use other tool like octopus or Samsung zx box to flash your firmware