Database Users

Help!! s4-i GT-i9500 wont reboot...Black screen. :(

My S4 GT-i9500 went out of battery last night and now it wont boot. I'm on PA 4.4 beta 1.
Although I can enter download mode only when my phone is connected to the PC but odin is not recognizing it.
Also if I disconnect it from the computer, my phone goes blank again.
Please help!!

Guys any possible solution to revive this phone or should I head towards the service center???

u_kansal said:
Guys any possible solution to revive this phone or should I head towards the service center???
Click to expand...
Click to collapse
Try reinstalling samsung drivers or kies to get odin to recognize the phone,
if Odin works again then you can try and flash stock firmware for your device

possible fix is to disable personalized message
I had same problem since KitKat 4.4.2 ( FNB8).
I think I fixed it by disabling personalized message on lock screen
1. go to Setting/LockScreen/Lock screen widget
2. disable personalized message by selecting clock

It doesn't sound like a software problem.
My guess is either your battery (is the battery swollen?) or a hardware problem.

Stefan0vic said:
Try reinstalling samsung drivers or kies to get odin to recognize the phone,
if Odin works again then you can try and flash stock firmware for your device
Click to expand...
Click to collapse
I reinstalled kies but odin is still not recognizing.

u_kansal said:
I reinstalled kies but odin is still not recognizing.
Click to expand...
Click to collapse
Why do you assume it's a software problem? If your battery ran out and now you can't boot, then the chances that it's a software problem is something like 0,1%.
Your battery is probably damaged, try a new battery.

Lennyz1988 said:
Why do you assume it's a software problem? If your battery ran out and now you can't boot, then the chances that it's a software problem is something like 0,1%.
Your battery is probably damaged, try a new battery.
Click to expand...
Click to collapse
Well I tried a different battery,but still I can't pass the "Samsung Galaxy S4 GT-i9500" screen. It blinks once, stays for about 5-7 seconds and then the phone shuts off.
I also can't access the recovery.

Can someone send me the correct PIT files for GT-i9500 or the link plzzz now.
I managed to connect it with odin I believe my phone is soft bricked. So flashing stock firmware, but getting an error, no PIT partition found.

Guys I'm getting this error in odin
Plz help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUFNC1_I9500ODDFNC1_I9500DDUFNA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Q] Odin, i9505 modem flash fail

Hi,
Step one: Turn the phone on and open up the dialler.
Step two: Then type *#0011# on the keypad.
Step three: Press the menu key, then tap BACK on the screen, press the menu key again and this time select KEY INPUT.
When the box appears enter the number ‘1’ and press OK.
Step four: Once again press the menu key and then tap BACK on the screen.
You should now be in the ServiceMode main menu.
Tap on the first option – [1]UMTS,
then tap the first option again [1]DEBUG SCREEN,
then tap on [6]PHONE CONTROL,
then [6]NETWORK LOCK and finally [3]PERSO SHA256 OFF.
Step five: Head back to the UMTS menu by pressing the menu button and tapping Back on the screen.
Step six: From here tap [6]COMMON, then [6]NV REBUILD and finally [4]RESTORE BACKUP.
Step seven: Now wait for a few minutes while your Galaxy S4 reboots.
Step eight: Once it’s running again, switch it off, pop in your giffgaff SIM and power it back on.
Congratulations you’re now free to enjoy giffgaff on your newly unlock Samsung Galaxy S4.
This is my first time owning an android phone (decided to give it a go after being on iPhones for the past few years)
Bought the phone locked to 3 (Three UK), was trying to follow tutorial above but i couldnt get into service mode. after digging around for a bit, someone said that i should try flashing a different modem (I9505_XXUAME2) which should let me unlock it, and then flash back to what it is now (I9505_XXUFNC5).
So i found this tutorial on how to flash the modem, but I could not succeed. can someone point me in the right direction as to what am i doing wrong?
Thank you in advance!
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505_DXUAMDE2_MODEM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!

Almost all errors in Odin can be solved by trying the following things:
- Different usb port
- Different usb cable
- Different pc.

Lennyz1988 said:
Almost all errors in Odin can be solved by trying the following things:
- Different usb port
- Different usb cable
- Different pc.
Click to expand...
Click to collapse
so does the screenshot look right, and i dont need any additional files?

plotney said:
<OSM> I9505_DXUAMDE2_MODEM.tar.md5 is valid.
Click to expand...
Click to collapse
Odin gives a bit strange message... MDE2??? Even if it would be proper i9505XXUAME2 file, flashing could fail as the modem is from 4.2.2, not from 4.4.2 system.
If I'd be you, I'd start from digging for a PROPER modem file

spamtrash said:
Odin gives a bit strange message... MDE2??? Even if it would be proper i9505XXUAME2 file, flashing could fail as the modem is from 4.2.2, not from 4.4.2 system.
If I'd be you, I'd start from digging for a PROPER modem file
Click to expand...
Click to collapse
would it be easier to flash 4.2.2, unlock it, and flash back to 4.4.2? or would i have to root it?

plotney said:
would it be easier to flash 4.2.2, unlock it, and flash back to 4.4.2? or would i have to root it?
Click to expand...
Click to collapse
I don't see an error about MDE2. That's just a normal message in Odin. The screenshot looks alright. Try the things i said.

Lennyz1988 said:
I don't see an error about MDE2. That's just a normal message in Odin. The screenshot looks alright. Try the things i said.
Click to expand...
Click to collapse
tried all the ports on my pc - no luck
waiting for a mate to come down with another cable
and what about what spamtrash said about modem being from 4.2.2, would that be an issue? dont want to brick the phone within 24 hours of getting it

plotney said:
tried all the ports on my pc - no luck
waiting for a mate to come down with another cable
and what about what spamtrash said about modem being from 4.2.2, would that be an issue? dont want to brick the phone within 24 hours of getting it
Click to expand...
Click to collapse
You won't brick it.
Some users report that they can just flash flash the older modem, so I think you can just flash that modem on a newer bootloader. The only thing you can't downgrade is the bootloader itself.
Just to make sure, you are not running your windows on a virtual machine right?

Lennyz1988 said:
You won't brick it.
Some users report that they can just flash flash the older modem, so I think you can just flash that modem on a newer bootloader. The only thing you can't downgrade is the bootloader itself.
Just to make sure, you are not running your windows on a virtual machine right?
Click to expand...
Click to collapse
ah okay, so 4.2.2 modem on a 4.4.2 should be fine?
no-no-no

My primary concern would be that modem: I9505_DXUAMDE2_MODEM.tar.md5 - while googled it, the only source was... funny.
I'd really advise you to try find newer modem and reflash it via Odin

right.
flashing modem to I9505XXUAME2 - success
now when i try going into the *#0011# menu, it actually works, but however when i do the unlocking steps it still asks me to put a correct sim in or enter SIM network unlock pin.
any idea why its not working?

[Q] Note 3 SM-900 Stuck on Splash Logo (Download Mode Works)

Hi Everyone,
Having a problem here with a SM-900 Note 3 sent back to the US here by a relative. A relative asked me to purchase it off Amazon with their credit card (prime shipping), so it comes from a trustworthy source. AFAIK the phone was unrooted (Knox counter 0) and apps were installed through the play store. The phone is stuck at the initial "Samsung Galaxy Note 3 SM-900" screen. The logo is not steady, instead it keeps flashing every 3 seconds. Recovery mode does not work, or at least the phone keeps flashing the logo. Download Mode, however, works and the phone stays turned on steady. Kies keeps saying connecting and Jodin3 keeps saying my phone isn't connected. I have tried all 4 ports and 3 separate usb cables. I don't have access to a Windows machine only an iMac. I'm not sure what is wrong. I'm going to try downloading odin to my mac to see if it will work. If all else fails, I plan on contacting Samsung to see if they will fix it seeing as it was purchased only 4 months ago. Any help is greatly appreciated.

Hiya Buddy said:
Hi Everyone,
Having a problem here with a SM-900 Note 3 sent back to the US here by a relative. A relative asked me to purchase it off Amazon with their credit card (prime shipping), so it comes from a trustworthy source. AFAIK the phone was unrooted (Knox counter 0) and apps were installed through the play store. The phone is stuck at the initial "Samsung Galaxy Note 3 SM-900" screen. The logo is not steady, instead it keeps flashing every 3 seconds. Recovery mode does not work, or at least the phone keeps flashing the logo. Download Mode, however, works and the phone stays turned on steady. Kies keeps saying connecting and Jodin3 keeps saying my phone isn't connected. I have tried all 4 ports and 3 separate usb cables. I don't have access to a Windows machine only an iMac. I'm not sure what is wrong. I'm going to try downloading odin to my mac to see if it will work. If all else fails, I plan on contacting Samsung to see if they will fix it seeing as it was purchased only 4 months ago. Any help is greatly appreciated.
Click to expand...
Click to collapse
If you were using a Windows PC, install Kies 3 to get a correct driver to be installed, then download a stock firmware for your device and flash via Odin. That could help to fix the problem.
I'm not familiar with iMac so I don't know what software can be a replacement for the Odin.
You can try Heimdall.

vndnguyen said:
If you were using a Windows PC, install Kies 3 to get a correct driver to be installed, then download a stock firmware for your device and flash via Odin. That could help to fix the problem.
I'm not familiar with iMac so I don't know what software can be a replacement for the Odin.
You can try Heimdall.
Click to expand...
Click to collapse
I managed to go over a friend's house and use his windows machine. I got the correct file and used Odin and it said "PASS". Unfortunately, the Note 3 is still having the same problem with the splash logo flashing every three seconds. Not sure whats wrong. Could it be hardware related? The battery contacts on the phone are fine. I don't think there is anything wrong with the battery itself because download mode works just fine. It seems to start the phone up its having trouble getting past the initial splash screen. Safe mode is not working either. Looks like I might have to put in a call to Samsung for warranty repair.

Hiya Buddy said:
Hi Everyone,
Having a problem here with a SM-900 Note 3 sent back to the US here by a relative. A relative asked me to purchase it off Amazon with their credit card (prime shipping), so it comes from a trustworthy source. AFAIK the phone was unrooted (Knox counter 0) and apps were installed through the play store. The phone is stuck at the initial "Samsung Galaxy Note 3 SM-900" screen. The logo is not steady, instead it keeps flashing every 3 seconds. Recovery mode does not work, or at least the phone keeps flashing the logo. Download Mode, however, works and the phone stays turned on steady. Kies keeps saying connecting and Jodin3 keeps saying my phone isn't connected. I have tried all 4 ports and 3 separate usb cables. I don't have access to a Windows machine only an iMac. I'm not sure what is wrong. I'm going to try downloading odin to my mac to see if it will work. If all else fails, I plan on contacting Samsung to see if they will fix it seeing as it was purchased only 4 months ago. Any help is greatly appreciated.
Click to expand...
Click to collapse
1. You will have to download one of the latest firmware of: HERE. I supose you don't know the CSC (country CODE) of your device. We don't know what firmware had your device either. Try to flash one of the newest for avoid active KNOX to 0x1 in future if you have to come back to one older firmware. Flash the firmware of the correct country if you know it ofc.
2. ODIN don't works in Mac.... use HEIMDALL. Lil guide: HERE

Hiya Buddy said:
I managed to go over a friend's house and use his windows machine. I got the correct file and used Odin and it said "PASS". Unfortunately, the Note 3 is still having the same problem with the splash logo flashing every three seconds. Not sure whats wrong. Could it be hardware related? The battery contacts on the phone are fine. I don't think there is anything wrong with the battery itself because download mode works just fine. It seems to start the phone up its having trouble getting past the initial splash screen. Safe mode is not working either. Looks like I might have to put in a call to Samsung for warranty repair.
Click to expand...
Click to collapse
Can you show the Odin screenshot? And also the full Odin log file?

UPDATE:
Vndnguyen; Sorry for the long wait as the past couple of weeks have been hectic with a family member in the hospital. Samsung Customer Support was obviously unhelpful but someone managed to find the true country of origin of my phone. They said (Samsung CS) based on IMEI it is from Taiwan. Now that I know the proper firmware I have downloaded the corresponding country version from Sam Mobile. Currently leaving Odin running to see if that does anything to fix it. Regardless, I will still post a screen shot and the log file.
P.S. It was confirmed the battery was not the problem, a Samsung Rep at a Best Buy store pulled out a battery from a working display Note 3 and used it in mine, but still no dice.

I tried the Taiwan firmware from Sam Mobile (N900ZSUENI3_N900OZSENI3_N900XXUENG1_HOME.tar.md5) but Odin reported fail. Even after 3 attempts it still reported fail. After contacting the third party seller via Amazon, they replied that the Note 3 was meant for Latin America. I picked one of the countries (Panama: N900UBUENJ2_N900UWAENJ2_N900UBUENG1_HOME.tar.md5) and Odin reported Pass! But it still keeps flashing at the boot screen.
This is the log for the Panama Firmware:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900UBUENJ2_N900UWAENJ2_N900UBUENG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
I'm not sure about "removed" because I left the Note 3 plugged in.
Here is the log for the Taiwan Firmware:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900ZSUENI3_N900OZSENI3_N900XXUENG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> param.bin
<ID:0/004> sboot.bin
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Here is a screenshot of Odin. With the phone still plugged in to the computer.

Stuck at Galaxy Note 3 logo please help

hi all, please help me my note 3 sm n900 stuck at note 3 logo, only download mode works, recovery mode not working. when i try to flash stock rom via odin its showing following log
leaves cs..
odin v.3 engine
file analysis
setup connection
initializing....
the its taking ages not going further:crying:
please help
it went into this state automatically i have not done anything, suddenly it was powered off then this problem occurred, btw its charging & showing battery % as well....

What are you flashing ??

JJEgan said:
What are you flashing ??
Click to expand...
Click to collapse
i was flashing nothing suddenly my fone get switched off then i tried to switched on so its not booting, odin is recognizing fone but fail to flash anything its giving error in the end something like " (pass 0/ failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..

Try different USB cables and USB ports.

nickomy said:
<ID:0/003> Initialzation..
Click to expand...
Click to collapse
Alots reason if stuck like this and some solution is weird but works
Wrong firmware, download the right one.
Not pull out battery and reinsert before flash with odin(better takeout sim and SD card, yeah this weird)
Cable problem
PC port problem(changing to others port)
Using wrong version, odin(better using latest)
Odin problem/bug in PC(because old version alots problem, solution is to close odin and open again then flash ROM
Another way, just flash TWRP, backup important file using TWRP then flash custom ROM
Try it & Goodluck.

audit13 said:
Try different USB cables and USB ports.
Click to expand...
Click to collapse
Tried with different usb cables & different usb ports but still no luck, read somewhere on xda that. The problem is with your device's hard drive which you may define as system storage . This is a very common issue with Samsung devices . Don't worry it's easy to fix . If you have warranty then go to Service center and if you don't have warranty then go to a service professional and ask him to replace your device's hard drive which contains ram and emcc in a single chip. If you face no base band issue then simply flash efs via odin that will resolve the imei issue
download menu status is
ODIN MODE
Product Name : SM-N900
Current Binary: Samsung Official
System Status: Official
Reactivation Lock (KK): OFF
Secure Download : Enabled
KNOX WARRENTY VOID : 1
RP SWREV : A4
Odin readings are
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUEBOC4_N900ODDEBOB2_N900DDUEBOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..

Does a com port get assigned to the phone in Odin?

audit13 said:
Does a com port get assigned to the phone in Odin?
Click to expand...
Click to collapse
some times yes some times no, then I'd to take out the battery n reinsert to recognize by odin. Kies is not recognizing at all. Thanks for your prompt replies really appreciate it:fingers-crossed:

It's definitely a problem if the phone losses USB connectivity.
It's possible the usb port on the phone is defective?

audit13 said:
It's definitely a problem if the phone losses USB connectivity.
It's possible the usb port on the phone is defective?
Click to expand...
Click to collapse
but its charging both from wall socket n laptop as well

There are 4 wires in a usb cable: 2 for data, 2 for power.
It's possible for a phone to charge and not transfer data.

audit13 said:
There are 4 wires in a usb cable: 2 for data, 2 for power.
It's possible for a phone to charge and not transfer data.
Click to expand...
Click to collapse
Ok i'll recheck n confirm, btw alot of thanks for youe help:fingers-crossed::good:
how much is the possibility that my fone hard drive got corrupted as its not going into recovery. I'm in doubt bcz my fone had required factory reset for no reason about once in a month

Your phone does not have a hard drive .
But its possible that the memory has a corrupt section .
But your symptoms are more likely an app causing the problem .

Thanks to all for their help, problem solved as it was connectivity issue i have tried on another pc it worked like a charm. Cheers to all

Problems Flashing

T-Mo On5 Pro (I think lol
So I flashed pegasis and reborn. Turns out that they both have sound issues and the camera doesn't work on either.
So I tried to flash the recovery from one of the other threads, nothing.
Tried to reflash pagasis and reborn, nothing.
I can get to TWRP which is awesome but now even ODIN can't push anything.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
At this point, I'm stuck and need a little bit of help (to at least go back to stock). Thanks!

I had this issue as well and what i did was use samsung kies to go back to stock since phone got semi-bricked and i could only enter download mode, since you have access to twrp you can try and flash the superstars rom which is stable and pretty much bug free

Echo_0408 said:
I had this issue as well and what i did was use samsung kies to go back to stock since phone got semi-bricked and i could only enter download mode, since you have access to twrp you can try and flash the superstars rom which is stable and pretty much bug free
Click to expand...
Click to collapse
Well, I guess I can grab Kies in the meantime.
Where did you grab the superstars ROM and the stock ROM? I just want to make sure camera and phone work lol.

Rom:
https://forum.xda-developers.com/sa...to/stock-rom-on5-flashable-metro-pcs-t3476919
Stock:
https://www.androidfilehost.com/?fid=24723757092307323
Remember that kies flashes the up to date stock rom so there's no need to download the stock one in my opinion

Echo_0408 said:
Rom:
https://forum.xda-developers.com/sa...to/stock-rom-on5-flashable-metro-pcs-t3476919
Stock:
https://www.androidfilehost.com/?fid=24723757092307323
Remember that kies flashes the up to date stock rom so there's no need to download the stock one in my opinion
Click to expand...
Click to collapse
Great now I have "An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software" on the On5.
I have to grab that to fix it so I can use Kies? or do I just use that now? :crying:
EDIT: So I can still drop it into download mode. But Kies and Smart Switch recognize that something is getting added. What am I missing for recovery? ...
Also - SOS send halps!

I've also been there, place your On5 on download mode and go to kies, Tools, firmware upgrade and initialisation it will ask for device model and s/n (everything can be found behind the battery) oh and type everything in CAPS

Echo_0408 said:
I've also been there, place your On5 on download mode and go to kies, Tools, firmware upgrade and initialisation it will ask for device model and s/n (everything can be found behind the battery) oh and type everything in CAPS
Click to expand...
Click to collapse
Failed to run firmware update. Unknown Error Occurred. Thanks for you all your help in this matter. I think it might be dead. lol

I'm sorry friend but I have no idea to what to do next I've semi-bricked this phone more times than I can count and managed to bring it back to life every time, maybe it's the variant? I have the sm-g550t or t-mo variant..

Echo_0408 said:
I'm sorry friend but I have no idea to what to do next I've semi-bricked this phone more times than I can count and managed to bring it back to life every time, maybe it's the variant? I have the sm-g550t or t-mo variant..
Click to expand...
Click to collapse
Thanks for messaging back every time though It's the T-Mo version as well. I'm really at a loss at this point. Going to try one more time this weekend and see what I get. :cheers:
Oh man - I don't know what happened but it finally recovered. I think doing it at home made the difference. Thanks!