HEEEELP.. Was trying to flash to stock JVP through ODIN and i mistakenly remove my fone during flashing.
Now my fone does not even bootup anymore. It can only get to download mode.
I've tried to flash again but got no result. see ODIN message during flash below.
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVP_REV_00_CL1019177.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
won't go pass the setuConnection.
PLSS HELP.
This is not a brick. Have you tried to Re-open ODIN or to Restart the Computer?
i've tried both. it does not get pass the <ID:0/005> SetupConnection..
Restart computer.
Unplug phone.
Start odin.
Add files.
Connect phone.
Flash.
Be patient.
Sent from my GT-I9000 using XDA Premium App
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Also, take battery out of phone and wait for 20 seconds. then do as above.
gizmolala said:
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Click to expand...
Click to collapse
Sometimes just waiting a while does it. Get a different version of odin maybe?
gizmolala said:
i've restarted the computer, unplug fone, start odin but it still stops at "<ID:0/005> SetupConnection.."
Click to expand...
Click to collapse
You loading up files into odin before or after you plug the phone in?
I know you are probably freaking out right now but if you can get download mode then it's still recoverable.
jcspecs said:
You loading up files into odin before or after you plug the phone in?
I know you are probably freaking out right now but if you can get download mode then it's still recoverable.
Click to expand...
Click to collapse
Exactly m8
Try using Odin 3.1 & flash with that if problem persists.
i loaded up files into odin b4 connecting my fone.
am using odin3 v1.85. where can i get 3.1 from pls
gizmolala said:
i loaded up files into odin b4 connecting my fone.
Click to expand...
Click to collapse
When you plug the phone in, is windows registering it and if so, are the drivers working correctly?
gizmolala said:
am using odin3 v1.85. where can i get 3.1 from pls
Click to expand...
Click to collapse
1.85 should be good. Try 1.7 maybe.
Could always try using heimdall instead of odin
Sent from my mosaic powered SGH-I897 using XDA Premium App
pls can u point me to where i can download heimdall from?
rquiett said:
Could always try using heimdall instead of odin
Click to expand...
Click to collapse
A valid point. Try Heimdall.
Have you removed sd- card and sim. Happened to me once. Removing both did the trick.
Sent from my GT-I9000 using XDA App
It's not a brick yet, dont worry.
1. Can you still go to the recovery mod? try to wip data/factory reset. reflash it.
2. If possible, do you have froyo 2.2 official (just as it's only one file in TAR)? Just flash it. Then flash 2.3.4 again.
Thanks all for your help.. I've tried all your suggestions but my phone won't actually boot to download mode anymore.
I've tried several times to go to download mode but to no avail. Screen is always blank (Black Screen) every time i tried.
gizmolala said:
Thanks all for your help.. I've tried all your suggestions but my phone won't actually boot to download mode anymore.
I've tried several times to go to download mode but to no avail. Screen is always blank (Black Screen) every time i tried.
Click to expand...
Click to collapse
take battery out for 10 mins then put it back in and try to go straight to download mode, see if that works
Related
So I've got a Euro non-carrier galaxy tab - shortly after receiving it I've done an update via Kies and this appears to of bricked the device.
Here is what happens:
Booting normally, the device sits on the Samsung logo and occasionally vibrates. This can go on for hours
In recovery, I get:
update media, please wait
update media, finished
#manual mode#
update application, please wait
check_point2: /data/app is not directory
followed shortly by the recover menu, with the following extra lines:
update application, finished
-appling muti-csc...
installing muti-csc
Now, here are the things I've done that I think are related
OCLF
Root
So - How do I fix this? I've tried pushing a fresh firmware back onto the device via odin 1.7, and this fails:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_P1000XXJM6.tar.md5 is valid.
<OSM> MODEM_P1000XXJM6.tar.md5 is valid.
<OSM> CSC_P1000OXAJM6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm running on an x64 win7 box btw.
I've tried:
wipe data/factory reset from recovery, which takes me to the screen with the andy and an orange ! in a triangle, but nothing more
the same happens if i try any option from recovery, really.
I welcome any suggestions - I've found a few people having similar issues, but no real luck in trying their solutions.
Oh hang fire guys, 'Phone EFS clear' appears to have fixed it...it's reflashing now in any case..
edit: i take that back, its made no difference at all. Ideas?
Anyone? Please help
thepittbull said:
Anyone? Please help
Click to expand...
Click to collapse
Don't panic! As I understand you did OCLF that converted Samsung proprietery RFS into ext4. This means that in order to reflash anything new you would need to convert it back. There is extensive material on how to revert it on XDA, for example in Samsung Vibrant development forum.
Look for it and revert. Then you can use Odin.
I did a similar thing the first time Kies offered me an update for my Samsung Galaxy S, I knew I was supposed to undo the OCLF first but in my haste to sample the new firmware I forgot.. Anyway, you won't be able to fix this with Kies as you'll need to do a full flash with re-partition via Odin. Good luck, I hope you get it working again!
Tried a full flash... now am stuck at the samsung logo...
thepittbull said:
Tried a full flash... now am stuck at the samsung logo...
Click to expand...
Click to collapse
Try to shut it down holding Power button. Then holding Volume-Up and Power try to boot it into recovery.
If you see text on the screen you can try to select to do full wipe following directions from the Tab screen, then reboot.
Another option is to flash Roto-JME with internal SD formatting. This operation is supposed to restore original RFS file system as well as firmware.
Since I never did this on a top of ext4 files system and I cannot say anything about the outcome.
Thanks will try that. Downloding Roto-JME-FmtIntSD-v2.zip now
Look for the dbdata.tar file on this forum and run Odin again (2nd run)
Got it! It worked. Thanks Adapt0r! Thanks so much!
iam useing odin and i have all the files downloaded and when i hit start it says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-DI18-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and it wont load pass that will someone plz help me
Tyler145 said:
iam useing odin and i have all the files downloaded and when i hit start it says
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-D700-DI18-8Gb-REL.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and it wont load pass that will someone plz help me
Click to expand...
Click to collapse
Are you sure your phone is in download mode? (press one and power..)
and dont you need usb debugging on for odin?
Power off your phone, disconnect the cable from both ends, close Odin, boot back into Download Mode, reopen Odin, connect the cable, try again.
Please post questions in Q&A. This is not the Q&A section.
soryy for posting here and yes it in download mode and i have did that already i unplug it alot and plug it back in
Use a non-stock USB cable.
iam useing a blackberry cord
Tyler145 said:
soryy for posting here and yes it in download mode and i have did that already i unplug it alot and plug it back in
Click to expand...
Click to collapse
Redownload odin and usb drivers and tar file....are u sure its in the PDA section?
i redownload everything 3 times and yes it i have it in the pda i done this b4 and it worked fine for me but idk whats wrong i been trying for hours
Tyler145 said:
i redownload everything 3 times and yes it i have it in the pda i done this b4 and it worked fine for me but idk whats wrong i been trying for hours
Click to expand...
Click to collapse
Use these:
Odin/PIT
EC05 TAR
Switch to a different USB port, and if that doesn't work, a different PC.
Have you tried restarting your Computer/ changing USB ports (use the back ones if it's a desktop).
i have those downloaded and i have change everyport and i dont have a diff pc only 1
Tyler145 said:
i have those downloaded and i have change everyport and i dont have a diff pc only 1
Click to expand...
Click to collapse
Got any friends?
i tryed on a friend pc and it did not work idk whats wrong should i just call sprint to get a new cell ?
Tyler145 said:
i tryed on a friend pc and it did not work idk whats wrong should i just call sprint to get a new cell ?
Click to expand...
Click to collapse
No. Try a different USB cable, different from the one you're using (don't care what it is). Try Heimdall. Remove the battery from the phone and leave it that way for two hours, then come back and try again. Switch up the order you're connecting between device and PC. Make sure the TAR is in the right place.
ok thanks i will post back in 2 hours i will unplug the batt for a while
Also try to reboot the pc afther installing odin and see if that works
Sent from my SPH-D700 using XDA Premium App
And if all else still fails, try running Odin with the battery removed from the phone...
Pull Battery from Phone,
Connect USB Cable to Phone,
Start Odin,
Boot Phone into Download Mode by holding 1 and Power (with battery still removed),
Flash .tar file.
I normally don't have issues when using Odin, but the few times I have had Odin fail on me (in multiple attempts consecutively), I have then been successful by pulling the battery out and flashing again.
What version of Odin are you using? I have been using 1.6 which has always seemed to work. Here is a good place with lots of Odin advice and files:
http://forum.xda-developers.com/showthread.php?t=773032
My S4 GT-i9500 went out of battery last night and now it wont boot. I'm on PA 4.4 beta 1.
Although I can enter download mode only when my phone is connected to the PC but odin is not recognizing it.
Also if I disconnect it from the computer, my phone goes blank again.
Please help!!
Guys any possible solution to revive this phone or should I head towards the service center???
u_kansal said:
Guys any possible solution to revive this phone or should I head towards the service center???
Click to expand...
Click to collapse
Try reinstalling samsung drivers or kies to get odin to recognize the phone,
if Odin works again then you can try and flash stock firmware for your device
possible fix is to disable personalized message
I had same problem since KitKat 4.4.2 ( FNB8).
I think I fixed it by disabling personalized message on lock screen
1. go to Setting/LockScreen/Lock screen widget
2. disable personalized message by selecting clock
It doesn't sound like a software problem.
My guess is either your battery (is the battery swollen?) or a hardware problem.
Stefan0vic said:
Try reinstalling samsung drivers or kies to get odin to recognize the phone,
if Odin works again then you can try and flash stock firmware for your device
Click to expand...
Click to collapse
I reinstalled kies but odin is still not recognizing.
u_kansal said:
I reinstalled kies but odin is still not recognizing.
Click to expand...
Click to collapse
Why do you assume it's a software problem? If your battery ran out and now you can't boot, then the chances that it's a software problem is something like 0,1%.
Your battery is probably damaged, try a new battery.
Lennyz1988 said:
Why do you assume it's a software problem? If your battery ran out and now you can't boot, then the chances that it's a software problem is something like 0,1%.
Your battery is probably damaged, try a new battery.
Click to expand...
Click to collapse
Well I tried a different battery,but still I can't pass the "Samsung Galaxy S4 GT-i9500" screen. It blinks once, stays for about 5-7 seconds and then the phone shuts off.
I also can't access the recovery.
Can someone send me the correct PIT files for GT-i9500 or the link plzzz now.
I managed to connect it with odin I believe my phone is soft bricked. So flashing stock firmware, but getting an error, no PIT partition found.
Guys I'm getting this error in odin
Plz help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUFNC1_I9500ODDFNC1_I9500DDUFNA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hi all, please help me my note 3 sm n900 stuck at note 3 logo, only download mode works, recovery mode not working. when i try to flash stock rom via odin its showing following log
leaves cs..
odin v.3 engine
file analysis
setup connection
initializing....
the its taking ages not going further:crying:
please help
it went into this state automatically i have not done anything, suddenly it was powered off then this problem occurred, btw its charging & showing battery % as well....
What are you flashing ??
JJEgan said:
What are you flashing ??
Click to expand...
Click to collapse
i was flashing nothing suddenly my fone get switched off then i tried to switched on so its not booting, odin is recognizing fone but fail to flash anything its giving error in the end something like " (pass 0/ failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
Try different USB cables and USB ports.
nickomy said:
<ID:0/003> Initialzation..
Click to expand...
Click to collapse
Alots reason if stuck like this and some solution is weird but works
Wrong firmware, download the right one.
Not pull out battery and reinsert before flash with odin(better takeout sim and SD card, yeah this weird)
Cable problem
PC port problem(changing to others port)
Using wrong version, odin(better using latest)
Odin problem/bug in PC(because old version alots problem, solution is to close odin and open again then flash ROM
Another way, just flash TWRP, backup important file using TWRP then flash custom ROM
Try it & Goodluck.
audit13 said:
Try different USB cables and USB ports.
Click to expand...
Click to collapse
Tried with different usb cables & different usb ports but still no luck, read somewhere on xda that. The problem is with your device's hard drive which you may define as system storage . This is a very common issue with Samsung devices . Don't worry it's easy to fix . If you have warranty then go to Service center and if you don't have warranty then go to a service professional and ask him to replace your device's hard drive which contains ram and emcc in a single chip. If you face no base band issue then simply flash efs via odin that will resolve the imei issue
download menu status is
ODIN MODE
Product Name : SM-N900
Current Binary: Samsung Official
System Status: Official
Reactivation Lock (KK): OFF
Secure Download : Enabled
KNOX WARRENTY VOID : 1
RP SWREV : A4
Odin readings are
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUEBOC4_N900ODDEBOB2_N900DDUEBOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
Does a com port get assigned to the phone in Odin?
audit13 said:
Does a com port get assigned to the phone in Odin?
Click to expand...
Click to collapse
some times yes some times no, then I'd to take out the battery n reinsert to recognize by odin. Kies is not recognizing at all. Thanks for your prompt replies really appreciate it:fingers-crossed:
It's definitely a problem if the phone losses USB connectivity.
It's possible the usb port on the phone is defective?
audit13 said:
It's definitely a problem if the phone losses USB connectivity.
It's possible the usb port on the phone is defective?
Click to expand...
Click to collapse
but its charging both from wall socket n laptop as well
There are 4 wires in a usb cable: 2 for data, 2 for power.
It's possible for a phone to charge and not transfer data.
audit13 said:
There are 4 wires in a usb cable: 2 for data, 2 for power.
It's possible for a phone to charge and not transfer data.
Click to expand...
Click to collapse
Ok i'll recheck n confirm, btw alot of thanks for youe help:fingers-crossed::good:
how much is the possibility that my fone hard drive got corrupted as its not going into recovery. I'm in doubt bcz my fone had required factory reset for no reason about once in a month
Your phone does not have a hard drive .
But its possible that the memory has a corrupt section .
But your symptoms are more likely an app causing the problem .
Thanks to all for their help, problem solved as it was connectivity issue i have tried on another pc it worked like a charm. Cheers to all
So, my Galaxy J5 Prime G570F switched off suddenly while I was using it. Since then, it only loads to Download Mode (Vol - + Power + Home) and shows Downloading, do not turn off target. I downloaded the stock rom files from xda and tried various versions of Odin with no success. Each time, Odin gets stuck on Initialization and my phone screen just shows the same Downloading. I noticed FRP and Secure Download are enabled. I have tried different USB ports and am using the original USB cable that came with it.
I even tried the old Odin 1.86 and here's the log from that:-
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G570FXXU1CRH9_CL14263629_QB19595919_REV00_user_low_ship.tar.md5 is valid.
<OSM> AP_G570FXXU1CRH9_CL14263629_QB19595919_REV00_user_low_ship_meta.tar.md5 is valid.
<OSM> CP_G570FXXU1CRH8_CL909798_QB10643368_SIGNED.tar.md5 is valid.
<OSM> CSC_OJV_G570FOJV1CRH9_CL14263629_QB19595919_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Please help.
vistatech9895927087 said:
<ID:0/003> Can't open the serial(COM) port.
Click to expand...
Click to collapse
Odin is is failing to recognize the usb port/device. Is the COM box blue?
You could try to install the samsung drivers at
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
I had the same issue and the drivers solved it.
Sent from my SM-J530G using XDA Labs
scroll-lock said:
Odin is is failing to recognize the usb port/device. Is the COM box blue?
You could try to install the samsung drivers at
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
I had the same issue and the drivers solved it.
Click to expand...
Click to collapse
Yes, the COM box is turning blue and I tried installing different drivers with no luck.
vistatech9895927087 said:
Yes, the COM box is turning blue and I tried installing different drivers with no luck.
Click to expand...
Click to collapse
hmm, is it possible to exit download mode and enter in the stock recovery?
Its weird because you did not flashed anything to brick it, maybe something got corrupt and a factory reset could help.
Sent from my SM-J530G using XDA Labs
scroll-lock said:
hmm, is it possible to exit download mode and enter in the stock recovery?
Its weird because you did not flashed anything to brick it, maybe something got corrupt and a factory reset could help.
Click to expand...
Click to collapse
I tried getting into the recovery (vol + + home + power) but it just won't boot. The only combination that works is vol - + home + power and it loads into download mode. I have been trying to fix this for some time now.
Please help someone!
same problem any body knows the solution
vistatech9895927087 said:
Please help someone!
Click to expand...
Click to collapse
1234devil said:
same problem any body knows the solution
Click to expand...
Click to collapse
How are things??
Ummm what Android os version was you on when you device suddenly shut down its self... just try latest oreo from other countries or trying to flash a combination firmware ... or else use other tool like octopus or Samsung zx box to flash your firmware
---------- Post added at 07:47 PM ---------- Previous post was at 07:41 PM ----------
1234devil said:
same problem any body knows the solution
Click to expand...
Click to collapse
Ummm what Android os version was you on when you device suddenly shut down its self... just try latest oreo from other countries or trying to flash a combination firmware ... or else use other tool like octopus or Samsung zx box to flash your firmware