[Q] Screen protector to cover the WHOLE surface? - Nexus 4 Q&A, Help & Troubleshooting

Hey guys, so I just got my membrane screen protectors for the nexus 4, installation was pretty quick and bubble-less. I noticed tho, not all of the surface is covered.. just the screen. The edges and the other parts of the frontal glass are not covered and therefore scratch-exposed. I googled a bit and found out there probably is no screenprotector which allows FULL cover of the surface.
Can you guys confirm? I think these Membrane protectors I got are just bad.. crazy cheap price for 6 protectors. They are crystal clear tho.

Bytecode said:
Hey guys, so I just got my membrane screen protectors for the nexus 4, installation was pretty quick and bubble-less. I noticed tho, not all of the surface is covered.. just the screen. The edges and the other parts of the frontal glass are not covered and therefore scratch-exposed. I googled a bit and found out there probably is no screenprotector which allows FULL cover of the surface.
Can you guys confirm? I think these Membrane protectors I got are just bad.. crazy cheap price for 6 protectors. They are crystal clear tho.
Click to expand...
Click to collapse
It has a slight curve at the edges which doesn't allow for complete adhesion, and at the top for the camera and prox sensors need to be open...so someone decided.

mrhiab said:
It has a slight curve at the edges which doesn't allow for complete adhesion, and at the top for the camera and prox sensors need to be open...so someone decided.
Click to expand...
Click to collapse
Thanks man. So which protector covers more?

I always have taken my phones to Ghost Armor, they cover everything for $40. They'll replace all of it for $10. It's almost rubber feeling but it's crystal clear.

ZULU2189 said:
I always have taken my phones to Ghost Armor, they cover everything for $40. They'll replace all of it for $10. It's almost rubber feeling but it's crystal clear.
Click to expand...
Click to collapse
$40? That's a lot for a screen protector. I'll just stick to Membrane protectors
To anyone having tried both Membrane screen protectors and Mediadevil protectors, which one is the best? My membrane protectors get veeeery dirty with fingerprints and crap, and cleaning up is not that easy. Crystal clear tho.

The screen protectors have to expose a few essential parts like the the front camera and proximity sensors etc. I don't see what the problem is as just about all of them cover a large percentage, unless you want to paint the phone in wood gloss.
You can use Skinomi wet screen protector and it seems to have a larger surface area and curves around the side edges of the phone. But that expose the screen protector to cases, when you put a case on, the case edges will dig into the screen protectors and lift it up. Skinomi is pretty good with resisting fingerprints and smudges for me.
I'm currently using the "iloome tempered glass" and the only thing it exposes are the front sensors.

eksasol said:
The screen protectors have to expose a few essential parts like the the front camera and proximity sensors etc. I don't see what the problem is as just about all of them cover a large percentage, unless you want to paint the phone in wood gloss.
You can use Skinomi wet screen protector and it seems to have a larger surface area and curves around the side edges of the phone. But that expose the screen protector to cases, when you put a case on, the case edges will dig into the screen protectors and lift it up. Skinomi is pretty good with resisting fingerprints and smudges for me.
I'm currently using the "iloome tempered glass" and the only thing it exposes are the front sensors.
Click to expand...
Click to collapse
Ordered a couple Mediadevil today from Amazon, in a week or so I'll get them. Don't mind if it doesn't cover the entire surface (btw I knew FFC and proximity sensors don't have to be covered).

Related

SGS II Camera Protection?

I had my first hairline scratch for SGS2 within 4 days of usage. Probably the Oleophobic coating it had which is more prone than Gorilla Glass.
I hurried to get a Screen protector but what about the camera?
Nobody in the forum seemed to be concerned about giving the 8MP's a decent protection.
Anyone here use a old SP on the lens or leave it as it is?
For a scratch-phobia user like me, probably not leaving chances to luck.
mystril said:
I had my first hairline scratch for SGS2 within 4 days of usage. Probably the Oleophobic coating it had which is more prone than Gorilla Glass.
It is Gorilla Glass
I hurried to get a Screen protector but what about the camera?
make one out of a screen protector .
jje
Click to expand...
Click to collapse
I stick a smiley sticker on the back under the camera so it doesn't touch the surface when I leave it on the table.
Or you may trying cutting a piece from a screnprotector...
mystril said:
I had my first hairline scratch for SGS2 within 4 days of usage. Probably the Oleophobic coating it had which is more prone than Gorilla Glass.
I hurried to get a Screen protector but what about the camera?
Nobody in the forum seemed to be concerned about giving the 8MP's a decent protection.
Anyone here use a old SP on the lens or leave it as it is?
For a scratch-phobia user like me, probably not leaving chances to luck.
Click to expand...
Click to collapse
Once I fixed a piece of a screen protector (which corresponded to area of the home button) on the camera's glass but it made my pictures terrible, specially because I covered the flash also. then I removed it. However it was one of the cheapest screen protector. A crystal clear one might be a different story.
mystril said:
I had my first hairline scratch for SGS2 within 4 days of usage. Probably the Oleophobic coating it had which is more prone than Gorilla Glass.
I hurried to get a Screen protector but what about the camera?
Nobody in the forum seemed to be concerned about giving the 8MP's a decent protection.
Anyone here use a old SP on the lens or leave it as it is?
For a scratch-phobia user like me, probably not leaving chances to luck.
Click to expand...
Click to collapse
I'm using martin shields screen protector, it comes with the protector for camera lens as well.
Sent from my GT-I9100 using XDA Premium App
I use two magnets and a washer for protecting it.... here is a video showing it with my old Galaxy S battery cover....
http://www.youtube.com/watch?v=Z-8P-xy32Tg&hd=1
Isn't compass showing towards your camera all the time?
I bought the SGP Ultra Capsule case for SGS2. It makes the phone about 1-2 mm thicker so when you put the phone on a flat surface the camera stays intact. Same goes for the screen. I've never used or even liked phone cases before but this case is awesome, my friends didn't even notice my phone had a case It also comes with a Crystal Clear screen protector so you can cut it to make a piece for your camera.
Oh and about the screen. The SGS2 screen is made of Gorilla Glass and has oleophobic coating. Oleophobic coating is not a glass type but coating, something that is added on top of the glass. And that coating doesn't scratch so you can't say that SGS2 is more prone to scratches due to the coating.
StupidIdea said:
Isn't compass showing towards your camera all the time?
Click to expand...
Click to collapse
Yes, the compass is the only disadvantage... But I dont use it, I prefer protecting the camera...
Jiia said:
I bought the SGP Ultra Capsule case for SGS2. It makes the phone about 1-2 mm thicker so when you put the phone on a flat surface the camera stays intact. Same goes for the screen. I've never used or even liked phone cases before but this case is awesome, my friends didn't even notice my phone had a case It also comes with a Crystal Clear screen protector so you can cut it to make a piece for your camera.
Oh and about the screen. The SGS2 screen is made of Gorilla Glass and has oleophobic coating. Oleophobic coating is not a glass type but coating, something that is added on top of the glass. And that coating doesn't scratch so you can't say that SGS2 is more prone to scratches due to the coating.
Click to expand...
Click to collapse
Yeap you're right. It should be the scratch-resistant (not proof) gorilla glass. I must make it clear that the scratch is a negligible hairline that only shows when screen's off.
I probably get a cheap crystal protector for the camera. Can't risk getting the goodness scratched =[
kirdroid said:
I'm using martin shields screen protector, it comes with the protector for camera lens as well.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
How is the screen protector like? I purchased a Matte Screen Protector and hell it makes my Super Amoled screen like rainbow glitter all over my screen. Especially the whites.
Worst money spent on a SP.
enough with cheap screen protector.
Try brando ultraclear and you won't regret it (brando don't pay me).
jokes aside, i had a pleomax screen protector with anti fingerprint treatment that work but the colors were bad. With the brando now i have the fingerprint but the colors are perfect and it's like there is not protector on the screen.
10+
sar3vok said:
enough with cheap screen protector.
Try brando ultraclear and you won't regret it (brando don't pay me).
jokes aside, i had a pleomax screen protector with anti fingerprint treatment that work but the colors were bad. With the brando now i have the fingerprint but the colors are perfect and it's like there is not protector on the screen.
10+
Click to expand...
Click to collapse
thanks man!
right now there're a few major downsides to SP for SGS2
Anti Fingerprint SP
+No Smudges
- Rainbow speckled display can drive some people mad when the purpose of SGS2 is it's beautiful AMOLED display. I mean, whats the point? Lol.
Crystal Clear SP
+Almost Naked SP
- Smudges.
Note: I am not too sure the extent of smudges on SP affecting user experiences.
But in short, with respect to thread's subject, I find many people have really unique ways to Sealing their SGS2 from wear and tear and by far the Magnet cover is the most creative and unique.
Solutions to SP for Camera
1) Get Martin Field's SP. They come with Camera SP. But they're only ones to do so.
2) Get a cheap crystal SP
3) Use a expensive SP just for the Camera SP.
Afterthoughts
I can't seem to abandon the thought of leaving the camera's glass Naked. I feel so uneasy when I lay it on the table, not knowing when some loose staplers or sand strikes/scratches.
Meanwhile I leave it to my case' thickness to safeguard my camera's glass for the time being...

Stay clear of Ghost Armor

Dear god what a frigging fiasco. Not only does every speck of dust adhere to the back of the screen protector, despite the application solution, but said dust particles seem to ave seriously deformed the plastic, so now the screen protector has zits.
Moving on to the entirely insufficient carbon fiber skin, there's not enough pieces to cover the sides, and the back piece is cut too small, always leaves a couple of millimeters of glass visible around the edge.
Moral:do NOT buy for the Xperia Z3!
I'm overnighting a new Skinomi setup....
npaladin2000 said:
Dear god what a frigging fiasco. Not only does every speck of dust adhere to the back of the screen protector, despite the application solution, but said dust particles seem to ave seriously deformed the plastic, so now the screen protector has zits.
Moving on to the entirely insufficient carbon fiber skin, there's not enough pieces to cover the sides, and the back piece is cut too small, always leaves a couple of millimeters of glass visible around the edge.
Moral:do NOT buy for the Xperia Z3!
I'm overnighting a new Skinomi setup....
Click to expand...
Click to collapse
Thats your opinion.
I have it as just a screen protector and it is fine. Much better than other protectors because with a case on it, it doesn't lift the screen protector edges.
The only issue I have with it is the screen oils up bad from fingerprints, easily fixed with one or two wipes over fabric
I guess this is an opinion too?
All that shows is you suck at applying screen protectors... lol.
You're supposed to install screen protectors in a dust free environment. Try turning the hot water on in the shower and waiting ~10 minutes, then try to install it.
Clearly you don't know very much.
Ghost Armor is the absolute worst of the wet-applied screen protectors. The whole idea behind wet-applied ones is so that the fluid captures the dust so it can be squeegied out from underneath the screen protector. Ghost Armor's adhesive, however, seems to grab onto every speck of dust it can find (apparently it's also got a static attraction component) and literally will not let go. Not even tape pulls it off, you have to soak it down and then scrape it off with a fingernail...at which point more dust gets pulled in and adheres. Any dust. Even in a humid bathroom. Horrible design.
Skinomi, Zagg, ArmorSuit, all of them work wonderfully in the same environment and under the same conditions. Ghost Armor? They can't even measure phone dimensions or create properly cut and sized skin pieces, so I guess asking them to create a proper wet-applied TPU screen protector is too much to ask.
npaladin2000 said:
Clearly you don't know very much.
Ghost Armor is the absolute worst of the wet-applied screen protectors. The whole idea behind wet-applied ones is so that the fluid captures the dust so it can be squeegied out from underneath the screen protector. Ghost Armor's adhesive, however, seems to grab onto every speck of dust it can find (apparently it's also got a static attraction component) and literally will not let go. Not even tape pulls it off, you have to soak it down and then scrape it off with a fingernail...at which point more dust gets pulled in and adheres. Any dust. Even in a humid bathroom. Horrible design.
Skinomi, Zagg, ArmorSuit, all of them work wonderfully in the same environment and under the same conditions. Ghost Armor? They can't even measure phone dimensions or create properly cut and sized skin pieces, so I guess asking them to create a proper wet-applied TPU screen protector is too much to ask.
Click to expand...
Click to collapse
I have used Ghost Armor many times, but have quit using wet-applied protectors in favor of glass protectors. (If I use one at all)
I guess your dust is more dusty than my dust.
I installed cheap mumbi display protectors on the front and back when i got the phone. Both without a single spot of dust or air under them. I don't even want to install my screen protector made of glass, as i then have to pull of the perfect installed normal protector.
Before installation, i had to wipe the screen several times as there was always new dust on it, i did not apply them wet or in my bathroom. Absolutely no problems, so i don't understand how there can be so much dust under the protector if anyone knows what he's doing.
Again, I can get any brand on completely dust-free, except for these things. Ergo, something is wrong with these things.
npaladin2000 said:
Again, I can get any brand on completely dust-free, except for these things. Ergo, something is wrong with these things.
Click to expand...
Click to collapse
It's completely possible you had a bad install...
Perhaps they use a better adhesive. I've never had any problem installing Ghost Armor, or any other "brand" screen protector.
xxquicksh0txx said:
Perhaps they use a better adhesive.
Click to expand...
Click to collapse
Maybe so. I think I read at one point that their protectors could optionally be installed dry, so maybe they're designed that way. But better isn't necessarily good. And I notice their instructions specify a wet install now.
Incidentally I just tried scraping off the dust and reapplying the thing. Only this time in my relatively dust free datacenter. And guess what? It managed to find some dust from somewhere. Damn, they should compete with Swiffer.
Anyway my emergency Skinomi will be here on Thursday. In the meantime this screen is driving me nuts though.
Sent from my Sony Xperia Z3 using Tapatalk.
npaladin2000 said:
Again, I can get any brand on completely dust-free, except for these things. Ergo, something is wrong with these things.
Click to expand...
Click to collapse
Interesting, I have used it on four phones, and not a single spec of dust on any of them if you prepare your surface correctly, I normally keep the phone screen facing the ground to stop dust settling on it, then apply holding the phone sideways as to keep as smallest surface area exposed to falling dust

ZF2 GorillaGlass3 protection is just a joke!!

My Z008 has got scratches out of nowhere. I always check before placing my phone under pant pockets. Still don't know how come these scratches are appearing. Now looking for a screen guard.
It's the gorilla glass 3 problem, I had the same scratches on my galaxy s5,so I got a tempered glass which is allot better in terms of micro scratches.
But fear not it's not the actual glass that is being scratched but the nano coating on top of the glass which is used to give a soft slide feeling, that's why you only see then with the screen off and from an angle.
The camera lens also gets scratched pretty easily, ad the glossy black plastic frame around the screen also develops small dents even if my phone is in a Ringke case.
I guess they really had to cut corners to give good specs at a cheap price.
DonMigs85 said:
The camera lens also gets scratched pretty easily, ad the glossy black plastic frame around the screen also develops small dents even if my phone is in a Ringke case.
I guess they really had to cut corners to give good specs at a cheap price.
Click to expand...
Click to collapse
Same here. the black bezel is easy scratched . I already have alot of scratches on my screen and almost 70 % on my camera lens. I only have my phone for 2 months . And got a case for it after 2 weeks.
Siddk007 said:
My Z008 has got scratches out of nowhere. I always check before placing my phone under pant pockets. Still don't know how come these scratches are appearing. Now looking for a screen guard.
Click to expand...
Click to collapse
With original zen cover no scratches, both zcreen and camera lens. Only a little scratch from wife's dimond earring near front cam, she forget to close cover before phone call, so for me filmscreen is waste of money and touch felling, useless
Apparently all material very soft. Frame around screen really soft.
jason4962 said:
Same here. the black bezel is easy scratched . I already have alot of scratches on my screen and almost 70 % on my camera lens. I only have my phone for 2 months . And got a case for it after 2 weeks.
Click to expand...
Click to collapse
I have had my phone since mid July and no scratches, black bezel around camera lens still perfect. Phone goes into my pocket every day. I use a dedicated pocket ie: nothing else goes in that pocket.
With the inexpensive Ringke case Impossible to scratch camera bezel or lens when placing phone on its back as it is then inset. For people that carry stuff in pocket with the phone I am sure a case would help prevent scratches. $200 or $300 for the phone spend $10.99 for a case. Lots of people must be buying the case as price has gone up several dollars since I got it.
Tempered Glass protector
If you all are experiencing these micro scratches, it's sort of an inevitable thing. Gorilla glass scratches with grains of sand or little things from your pocket. If you're really worried about your phone, you can purchase a tempered glass screen protector, and a case to fully protect your device!
Case and tempered glass screen protector are a must. Added them as soon as I took my zen out the box
Tempered glass save my screen from crack also.
Even glass broken, but my phone screen is protected.
I've had no issues other then dropping and breaking the screen but the repair guys told me this phone for the cost is really well built with easy repairability
Sent from my ASUS_Z00AD using XDA Free mobile app
I quit using a case months ago (cheap crappy pleather wallet case I bought for it just irritates me, and my wife pinched my clear soft gel case). No scratches on screen, one or two minor dents on the black plastic edges but you'd need a magnifying glass to notice them. Very pleased - my previous phone (black slate iPhone 5) got scratches on it if you as much as looked at it, and silver scratches on slate iodised aluminium looked bloody awful.
i have a cover and dont worry about scratch )
Yea same problem got alot of faint scratches out of nowhere threw a tempered glass on
Have quie a few phones and tablets, every one since the Samsung Galaxy S3 has had a tempered glass screen protector installed.
I know this phone is supposed to be cheap in comparison with say, the note 5, but I don't have around $500AUD to throw away just because I cracked the screen, even $200 to repair is a kick in the nuts....
Those glass protectors have helped a lot of my phones survive intact.
I don't care if I don't notice the scratches when the screen is on.
For those hoping miracles on gorilla glass:
Diamonds only can be scratched by diamonds
Sapphire only can be scratched by sapphire or diamonds
Gorrillaglass can be scratched by the diamonds, sapphire or whatever is harder than GorillaGlass, this is the rule.
Where you can find things harder than gorilla glass?
a Jewelry ? sure,
the floor? - maybe, some dirt particles actually are are sand, in some places sand is composed by limestone someties harder than gorillaglass.
your pockets? very likely specially if you have two cellphones, the sapphire cover on the lens camera easy can scratch the gorillaglass on other phone, also some pencils have diamond particles on its graphite, further DIAMONDS PARTICLES ARE VERY COMMON, SINCE SiNTETIC DIAMONDS ARE USE AS ABRASIVE ON MANY DRILLING TOOLS.
So, protect your gorillaglass if you hate scratches, harder is not warranty to be invulnerable.

Do you use a screen protector?

I still have the screen protector that came when the phone shipped on the back screen. Do you use a screen protector and if not did the screen scratch easily? Is the rear screen made of gorilla glass like the front or something easier to break?
sportsfan986 said:
I still have the screen protector that came when the phone shipped on the back screen. Do you use a screen protector and if not did the screen scratch easily? Is the rear screen made of gorilla glass like the front or something easier to break?
Click to expand...
Click to collapse
Both of the screen are supposedly made of Gorilla Glass. Personally I don't use any kind of screen protectors, and no scratches yet. I do keep good care of my device, though.
I think the best protection would be the bumber. That way you would avoid scratches from surfaces when you set your phone down, and get some protection in case you dropped your phone.
I use a screenprotector on front and back. On the back I find it improves clarity (less fuzzy) and has better grip. See here for a review. I agree with Jeopardy that a bumper is best for protection (ialso have).

LeEco Pro 3, anyone using it withou ANY screen protector?

The stock screen protector is rubbing off so I replaced it with a new one.
https://www.amazon.com/gp/product/B01N3ZTMLG/ref=od_aui_detailpages00?ie=UTF8&psc=1
Unlike the stock one, this one is the hard glass. (the stock one is a film).
The problem with this screen protector is that it is a grease/finger print magnet. Ususally I can remove the grease/finger print from the screen by rubbing it on my shirt. With this one, it just moves the finger print grease around. No my shirt is not greasy because I tried it on another phone and it didn't smear the grease around. The only way to get a clean screen is if I use a micro fiber clothe with some water. Also I noticed that my screen is not as bright as before with the new screen protector, especially when using it outdoors.
I was thinking about remove the screen protector all together. Since our phone has Corning® Gorilla® Glass 3, it "should" be fine. But before I remove the new screen protector, just wondering if anyone is going bare on the screen and if they have any issues with scratched screen.
Thanks
I haven't had any screen protector on my phone since october. Screen is fine, although I haven't dropped my phone.
I have been using the same screen protector which i bought from aliexpress and i can feel the brightness problem but i am fine with it since this tmp glass removes entirely the ugly black borders from the phone.
I dont know if there is a good color tempered glass which does both.
Just removed the aftermarket screen protector today and going bare. So far it seems fine and resistant to scratches as well. It feels a lot better than the stock screen protector or the aftermarket one. It is a lot brighter and really smooth. Another thing that I noticed is that it is a lot more sensitive to the touch.
Never used any sort of screen protector on my phones. Never a single scratch.
As long as you do not put any other items in a pocket with a phone, it should be fine.
I have tried 3-4 different screen protectors and none of them seem to stick properly. They never want to stick on either (or both) the left and right sides of the screen. idk what the issue is but I've never had that problem on other phones
I'm too afraid to not use any screen protector. The camera lens scratches so easily that I don't trust the glass at all.
Sent from my LEX727 using Tapatalk
The stock screen protector is rubbing off so I replaced it with a new one.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Unlike the stock one, this one is the hard glass. (the stock one is a film).
The problem with this screen protector is that it is a grease/finger print magnet. Ususally I can remove the grease/finger print from the screen by rubbing it on my shirt. With this one, it just moves the finger print grease around. No my shirt is not greasy because I tried it on another phone and it didn't smear the grease around. The only way to get a clean screen is if I use a micro fiber clothe with some water. Also I noticed that my screen is not as bright as before with the new screen protector, especially when using it outdoors.
I was thinking about remove the screen protector all together. Since our phone has Corning® Gorilla® Glass 3, it "should" be fine. But before I remove the new screen protector, just wondering if anyone is going bare on the screen and if they have any issues with scratched screen.
Click to expand...
Click to collapse
I Have the same problem. While the screen protector is ok and protects the phone, it catches fingerprints and the most anoying thing, outside it reflects everything and I can't see very well. I didn't find any matte or anti-glare tempered glass screen for le pro 3. Only iphone and something else. If anyone finds something good post a link please.
motanel_pufos said:
I Have the same problem. While the screen protector is ok and protects the phone, it catches fingerprints and the most anoying thing, outside it reflects everything and I can't see very well. I didn't find any matte or anti-glare tempered glass screen for le pro 3. Only iphone and something else. If anyone finds something good post a link please.
Click to expand...
Click to collapse
It has been a week now since I removed all screen protector and I am happy that I did it. It feels so much better and I can say that the gorilla glass on this is legit. I work in a warehouse and I have my keys and a box cutter in my pockets. I try to keep them away from my phone but when you are moving fast, sometimes the box cutter ends up in the same packet as my phone. So far still no scratch on the screen.
I'm still keeping mine, even if reflects everything because on my old phone covered with full cover, front and back, dropped on a corner of the screen, the screen protector took the fall and broke instead of the actual screen. So better to be cautios.
Mine came with a screen protector (X727), but I ripped it off very quickly. I haven't broken a single smartphone yet.
No screen protector since day one. No case either. Dropped it few times and cosmetic glass around camera cracked. Front screen is pristine, which is surprising since I am not careful with it.
Sent from my LEX727 using Tapatalk
Found these cases on Amazon that provide screen protection. I have used similar cases on other devices and have had good luck in preserving the screen without the use of a screen protector:
kw mobile canvas case
kw mobile cover shell case
Never used any screen protector on my smartphones, since my first Sony Ericson P800 years before the first iPhone were released...
Never broke the screen, had a few small scratches on some of them (not all though), and I usually keep my devices for 3 to 4 years. My previous phone was a Samsung Note 2, the screen is still perfect.
I will not put any screen protector on my Le Pro 3 either...
I was using the stock screen protector which was preinstalled until today. Sand scratched it so I removed it.
Sent from my LEX727 using Tapatalk
Is anyone having issues with corners of your tempered glass protectors not adhering properly? I'm getting white ghosting all around the protector. Replacement ones had the same effect...
RussianBear said:
Is anyone having issues with corners of your tempered glass protectors not adhering properly? I'm getting white ghosting all around the protector. Replacement ones had the same effect...
Click to expand...
Click to collapse
Same problem for me.I think its because of the curve of the screen
I got the full coverage one from aliex, no problems with adhesion, but it's an awfull magnet for smudges and fingerprints, and dulls the colors of the screen, gonna run it a few days just for kicks, but I'll remove it for sure.
And oh, havent had a screen protector, not since day one, and no problems, not a scratch on my phone (I do take care of my gadgets though)
Valinos said:
Same problem for me.I think its because of the curve of the screen
Click to expand...
Click to collapse
mine doesn't even cover the screen fully...baffled by this, honestly.
I removed screen protector today. Got sick of dust and other sht all around due to corners of glass not adhering properly. The phone looks much better, so far so good.
Just in case try to avoid keeping it with keys etc. Also check this .

Categories

Resources